d372e7e477
SDIO support for STM32F1 ( #12782 )
6 years ago
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
6 years ago
a59d3d4323
Restore Flattr links to README
6 years ago
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
(Exactly matching the Azteeg X5 MINI Wifi)
6 years ago
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 years ago
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
6 years ago
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
6 years ago
288340cb6c
Followup to VORON
6 years ago
2aaa681dea
Remove unused Cheaptronic pins
6 years ago
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
6 years ago
74c47803f7
Add VORON printer ( #12705 )
6 years ago
637fb20c75
Allow 4 fan animation frames ( #12772 )
6 years ago
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
6 years ago
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
6 years ago
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
6 years ago
60cb36bef3
Misc. improvements ( #12747 )
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
6 years ago
4f2473053c
Fix M106 with SINGLENOZZLE
6 years ago
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
6 years ago
371d9a1acf
Fix line-endings, formatting, whitespace
Followup to #12770
6 years ago
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
6 years ago
54ba44ee37
Fix bad sanitycheck ( #12748 )
6 years ago
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
6 years ago
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
6 years ago
3a16cb6d7f
Slightly Slower Max X Axis speed
On some T-Rex 2+ machines the previous max step rate could lose steps....
6 years ago
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
6 years ago
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
6 years ago
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
6 years ago
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
6 years ago
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
6 years ago
14ddda285c
Confirmation on Abort SD print ( #12717 )
6 years ago
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
6 years ago
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
6 years ago
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
6 years ago
33abb86b7e
Add support for MKS Robin board ( #12650 )
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
6 years ago
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
6 years ago
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
6 years ago
9d59a9c840
Followup to #12691 (typo)
6 years ago
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
6 years ago
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
6 years ago
98cf546771
Limit set hotend temperature to maxtemp. ( #12690 )
6 years ago
4dad489a50
[2.0.x] Limit PID autotune target to maxtemp-15 ( #12691 )
6 years ago
8dcc28c9ae
Squelch warning mentioned in #11061 ( #12676 )
6 years ago
4c8a6eee7b
[2.0.x] Update Czech translation ( #12683 )
6 years ago
fcaed685b2
[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config ( #12664 )
6 years ago
0572be9439
[2.0.x] Enable PIDTEMPBED in Anet A8 example config ( #12655 )
6 years ago
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
6 years ago
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
6 years ago
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
6 years ago
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
6 years ago
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
6 years ago
jmz52
Marcio Teixeira
Scott Lahteine
luxflow
Phr3d13
Ludy
kAdonis
petieken
TheLongAndOnly
InsanityAutomation
Reece Kibble
Giuliano Zaro
swilkens
Alain Martel
Roxy-3D
Roman Moravčík
Msq001
Kadah
Ondřej Nový
Luc Van Daele
teemuatlut
Dave Johnson