Browse Source
Implement initial support for MKS Robin (STM32F103ZET6) board. Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).pull/1/head
jmz52
5 years ago
committed by
Scott Lahteine
Scott Lahteine
9 changed files with 4186 additions and 2 deletions
File diff suppressed because it is too large
File diff suppressed because it is too large
@ -0,0 +1,109 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
/**
|
|||
* MKS Robin (STM32F130ZET6) board pin assignments |
|||
*/ |
|||
|
|||
#ifndef __STM32F1__ |
|||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
|||
#endif |
|||
|
|||
#if HOTENDS > 2 || E_STEPPERS > 2 |
|||
#error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue." |
|||
#endif |
|||
|
|||
#define BOARD_NAME "MKS Robin / STM32F103ZET6" |
|||
|
|||
//
|
|||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
|||
//
|
|||
#define DISABLE_DEBUG |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN PB12 |
|||
#define X_MAX_PIN PB0 |
|||
#define Y_MIN_PIN PC5 |
|||
#define Y_MAX_PIN PC4 |
|||
#define Z_MIN_PIN PA4 |
|||
#define Z_MAX_PIN PF7 |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_ENABLE_PIN PB9 |
|||
#define X_STEP_PIN PB8 |
|||
#define X_DIR_PIN PB5 |
|||
|
|||
#define Y_ENABLE_PIN PB4 |
|||
#define Y_STEP_PIN PG15 |
|||
#define Y_DIR_PIN PG10 |
|||
|
|||
#define Z_ENABLE_PIN PD7 |
|||
#define Z_STEP_PIN PD3 |
|||
#define Z_DIR_PIN PG14 |
|||
|
|||
#define E0_ENABLE_PIN PG13 |
|||
#define E0_STEP_PIN PG8 |
|||
#define E0_DIR_PIN PA15 |
|||
|
|||
#define E1_ENABLE_PIN PA12 |
|||
#define E1_STEP_PIN PA11 |
|||
#define E1_DIR_PIN PA8 |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN PC1 // TH1
|
|||
#define TEMP_1_PIN PC2 // TH2
|
|||
#define TEMP_BED_PIN PC0 // TB1
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN PC7 // HEATER1
|
|||
#define HEATER_1_PIN PA6 // HEATER2
|
|||
#define HEATER_BED_PIN PC6 // HOT BED
|
|||
|
|||
#define FAN_PIN PA7 // FAN
|
|||
|
|||
#define SERVO0_PIN PC3 // XS1 - 5
|
|||
#define SERVO1_PIN PA1 // XS1 - 6
|
|||
#define SERVO2_PIN PF9 // XS2 - 5
|
|||
#define SERVO3_PIN PF8 // XS2 - 6
|
|||
|
|||
/**
|
|||
* Note: MKS Robin board is using SPI2 interface, make sure your stm32duino library is configured accordingly |
|||
*/ |
|||
//#define MAX6675_SS_PIN PE5 // TC1 - CS1
|
|||
//#define MAX6675_SS_PIN PE6 // TC2 - CS2
|
|||
|
|||
#define POWER_LOSS_PIN PA2 // PW_DET
|
|||
#define PS_ON_PIN PA3 // PW_OFF
|
|||
#define FIL_RUNOUT_PIN PF11 // MT_DET
|
|||
|
|||
#define BEEPER_PIN PC13 |
|||
#define LED_PIN PB2 |
|||
|
|||
#define SDSS -1 |
|||
@ -0,0 +1,14 @@ |
|||
MEMORY |
|||
{ |
|||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40 |
|||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K |
|||
} |
|||
|
|||
/* Provide memory region aliases for common.inc */ |
|||
REGION_ALIAS("REGION_TEXT", rom); |
|||
REGION_ALIAS("REGION_DATA", ram); |
|||
REGION_ALIAS("REGION_BSS", ram); |
|||
REGION_ALIAS("REGION_RODATA", rom); |
|||
|
|||
/* Let common.inc handle the real work. */ |
|||
INCLUDE common.inc |
|||
@ -0,0 +1,28 @@ |
|||
Import("env") |
|||
|
|||
# Relocate firmware from 0x08000000 to 0x08007000 |
|||
env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728)) |
|||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000")) |
|||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/mks_robin.ld") |
|||
|
|||
# Encrypt ${PROGNAME}.bin and save it as 'Robin.bin' |
|||
def encrypt(source, target, env): |
|||
import os |
|||
|
|||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E] |
|||
|
|||
firmware = open(target[0].path, "rb") |
|||
robin = open(target[0].dir.path +'/Robin.bin', "wb") |
|||
length = os.path.getsize(target[0].path) |
|||
position = 0 |
|||
try: |
|||
while position < length: |
|||
byte = firmware.read(1) |
|||
if position >= 320 and position < 31040: |
|||
byte = chr(ord(byte) ^ key[position & 31]) |
|||
robin.write(byte) |
|||
position += 1 |
|||
finally: |
|||
firmware.close() |
|||
robin.close() |
|||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); |
|||
Loading…
Reference in new issue