Scott Lahteine
cec6e19099
Add RepRapPro Huxley configuration
Based on #10343 by @indazoo
6 years ago
Scott Lahteine
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
6 years ago
Scott Lahteine
cea398849e
Tweak to gcode_line_error/return
6 years ago
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
6 years ago
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
6 years ago
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
6 years ago
Bob-the-Kuhn
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check ( #10336 )
6 years ago
Bob-the-Kuhn
ab715c70d1
TMC SPI sanity-check and pins debugging ( #10324 )
6 years ago
Scott Lahteine
4dc7e64789
Update Slovak language
Based on #10313 by @rmoravcik
6 years ago
Marcio Teixeira
2efc072fdb
Clear progress bar on completion ( #10333 )
Fix #10330
6 years ago
GMagician
6ce060cfe0
[2.0.x] Update language_it.h ( #10322 )
Updated to #10296
6 years ago
Marcio Teixeira
9356cf648f
Added support for Einsy Retro
http://reprap.org/wiki/EinsyRetro
6 years ago
Marcio Teixeira
75037493fa
Default active low for TMC2130 DIAG1 ( #10294 )
- Added sanity check to inform users to set the endstop to inverting
when using SENSORLESS_HOMING
6 years ago
Scott Lahteine
e8e60263c8
Scale feedrate (mm/s to deg/s) for SCARA
6 years ago
Scott Lahteine
051303ad42
Russian language updates
From #10311 by @anton-piliugin
6 years ago
Sean
2fa0a73c2c
Implement filament change continuous purge
7 years ago
Scott Lahteine
d133ad61f3
Add continuous purge to example configs
7 years ago
Scott Lahteine
4b25543633
Backtrace formatting cleanup
7 years ago
Bob-the-Kuhn
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
7 years ago
Scott Lahteine
1c36606886
Fix MSG_HEATING_FAILED_LCD_BED macro evaluation
7 years ago
Scott Lahteine
fe91514395
MBL should add z_offset regardless of fade ( #10308 )
7 years ago
Marcio Teixeira
8bc93c6f2b
Improve heating/cooling LCD messages ( #10293 )
7 years ago
GMagician
21a47b50f4
Additional tool-change fixes ( #10304 )
Followup to #10257
7 years ago
Scott Lahteine
f68b4265a6
Fix a probe pin definition
7 years ago
Yunhui Fu
a019eebdd6
support utf8 unicode for test language ( #10220 )
7 years ago
Scott Lahteine
656219d867
Add configs for Creality CR-8
7 years ago
Karl Andersson
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
7 years ago
Marcio Teixeira
4d1a61335c
[2.0.x] Fixed Makefile for Marlin 2.0 ( #10255 ) ( #10281 )
* Fixed Makefile for Marlin 2.0 (#10255 )
- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.
* Makefile support for U8glib and TMC2130Stepper
- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
7 years ago
Scott Lahteine
4c79dc1093
Fix a Serial+EEPROM compile error
Fixes #10278
7 years ago
Scott Lahteine
93305a2d5e
Fix some spellings
7 years ago
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
Scott Lahteine
4f0eafce8f
Add more AVR boards to Makefile
7 years ago
Scott Lahteine
4a23069de9
Fix Ender 4 / CR-8 compilation
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
7 years ago
Scott Lahteine
02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM ( #10275 )
7 years ago
Scott Lahteine
9ec2c03c5b
Fix likely error in retract/recover
Addressing #10200
7 years ago
Scott Lahteine
49f384a2ab
Note about MKS_MINI_12864 in sanitycheck
7 years ago
Scott Lahteine
2672120a97
Do a small raise for all move-back
7 years ago
Scott Lahteine
5acccbacc1
Simplified leveling-based tool change
7 years ago
Scott Lahteine
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
7 years ago
Scott Lahteine
d1734a089a
Split up tool_change for some setups
7 years ago
Scott Lahteine
a9f94f260a
Some RADDS pin updates
7 years ago
Scott Lahteine
31df43212c
Use lcd_printPGM_utf in more places
Fix #10256
7 years ago
Scott Lahteine
7d8a46519f
Output ABC for delta stepper counts
7 years ago
Scott Lahteine
6098efcc59
Use float62 for LCD edit of Z Fade
7 years ago
Scott Lahteine
f6d13e2295
Allow Z_SAFE_HOMING sanity checks to handle floats
7 years ago
Scott Lahteine
889fd5f71f
Backtrace minor cleanup
7 years ago
Scott Lahteine
53f0c7522a
Symmetrical FWRETRACT Z Hop
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
7 years ago
Scott Lahteine
ac7e97f4fe
Change order of inactive stepper disable/enable
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
7 years ago
Scott Lahteine
55e9b85ad6
Clear the "Wait for user" message set by M0/M1
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
7 years ago