Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
etagle	a29adde5c0	Implement BEZIER_JERK_CONTROL Enable 6th-order jerk-controlled motion planning in real-time. Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)	7 years ago
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	7 years ago
Lenbok	0e8242180d	Chamber temperature monitoring and auto fan control. This is an initial cut for feedback, updated for 2.0.x. Chamber temperature is currently reported along with hot end and bed temperatures to serial. The format is just like that used for hot end and bed temperatures, but using 'C' prefix. As there is no heater, target is always 0. Is this appropriate, is there a better way to report chamber temperatures? Chamber temperatures are not reported on the LCD in any way. When auto chamber fan is enabled, it currently just uses the same temperature threshold as the other auto controlled fans. As the chamber temperature is not connected to any heater, it doesn't undergo mintemp/maxtemp monitoring. This would need to change in the future if chamber heating became a feature.	7 years ago
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	7 years ago
Bob-the-Kuhn	acda4ecb20	Fix DUE Trinamic SW/HW SPI sanity check (#10336 )	7 years ago
Bob-the-Kuhn	ab715c70d1	TMC SPI sanity-check and pins debugging (#10324 )	7 years ago
Scott Lahteine	4dc7e64789	Update Slovak language Based on #10313 by @rmoravcik	7 years ago
Marcio Teixeira	2efc072fdb	Clear progress bar on completion (#10333 ) Fix #10330	7 years ago
GMagician	6ce060cfe0	[2.0.x] Update language_it.h (#10322 ) Updated to #10296	7 years ago
Marcio Teixeira	9356cf648f	Added support for Einsy Retro http://reprap.org/wiki/EinsyRetro	7 years ago
Marcio Teixeira	75037493fa	Default active low for TMC2130 DIAG1 (#10294 ) - Added sanity check to inform users to set the endstop to inverting when using SENSORLESS_HOMING	7 years ago
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	7 years ago
Scott Lahteine	051303ad42	Russian language updates From #10311 by @anton-piliugin	7 years ago
Sean	2fa0a73c2c	Implement filament change continuous purge	7 years ago
Scott Lahteine	d133ad61f3	Add continuous purge to example configs	7 years ago
Scott Lahteine	4b25543633	Backtrace formatting cleanup	7 years ago
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299 )	7 years ago
Scott Lahteine	1c36606886	Fix MSG_HEATING_FAILED_LCD_BED macro evaluation	7 years ago
Scott Lahteine	fe91514395	MBL should add z_offset regardless of fade (#10308 )	7 years ago
Marcio Teixeira	8bc93c6f2b	Improve heating/cooling LCD messages (#10293 )	7 years ago
GMagician	21a47b50f4	Additional tool-change fixes (#10304 ) Followup to #10257	7 years ago
Scott Lahteine	f68b4265a6	Fix a probe pin definition	7 years ago
Yunhui Fu	a019eebdd6	support utf8 unicode for test language (#10220 )	7 years ago
Scott Lahteine	656219d867	Add configs for Creality CR-8	7 years ago
Karl Andersson	7cbbc2af7a	[2.0.x] Optional heater signal inversion (#10260 )	7 years ago
Marcio Teixeira	4d1a61335c	[2.0.x] Fixed Makefile for Marlin 2.0 (#10255 ) (#10281 ) * Fixed Makefile for Marlin 2.0 (#10255) - Makefile now supports the new Marlin 2.0 directory hierarchy. - RELOC_WORKAROUND is now automatically enabled based on avr-gcc version. * Makefile support for U8glib and TMC2130Stepper - Updated paths for oliver's U8glib 1.19.1 - Added option for teemuatlut's TMC2130Stepper 2.2.1	7 years ago
Scott Lahteine	4c79dc1093	Fix a Serial+EEPROM compile error Fixes #10278	7 years ago
Scott Lahteine	93305a2d5e	Fix some spellings	7 years ago
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	7 years ago
Scott Lahteine	4f0eafce8f	Add more AVR boards to Makefile	7 years ago
Scott Lahteine	4a23069de9	Fix Ender 4 / CR-8 compilation - Assign 243 (like EFB) as Ender-4/CR-8 board ID - Add to `Makefile` - Add to `pins.h`	7 years ago
Scott Lahteine	02f0f95d40	Handle disabled HYBRID_THRESHOLD in EEPROM (#10275 )	7 years ago
Scott Lahteine	9ec2c03c5b	Fix likely error in retract/recover Addressing #10200	7 years ago
Scott Lahteine	49f384a2ab	Note about MKS_MINI_12864 in sanitycheck	7 years ago
Scott Lahteine	2672120a97	Do a small raise for all move-back	7 years ago
Scott Lahteine	5acccbacc1	Simplified leveling-based tool change	7 years ago
Scott Lahteine	1a75165f35	For set_z_fade_height use set_bed_leveling_enabled	7 years ago
Scott Lahteine	d1734a089a	Split up tool_change for some setups	7 years ago
Scott Lahteine	a9f94f260a	Some RADDS pin updates	7 years ago
Scott Lahteine	31df43212c	Use lcd_printPGM_utf in more places Fix #10256	7 years ago
Scott Lahteine	7d8a46519f	Output ABC for delta stepper counts	7 years ago
Scott Lahteine	6098efcc59	Use float62 for LCD edit of Z Fade	7 years ago
Scott Lahteine	f6d13e2295	Allow Z_SAFE_HOMING sanity checks to handle floats	7 years ago
Scott Lahteine	889fd5f71f	Backtrace minor cleanup	7 years ago
Scott Lahteine	53f0c7522a	Symmetrical FWRETRACT Z Hop Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.	7 years ago
Scott Lahteine	ac7e97f4fe	Change order of inactive stepper disable/enable This ensures that steppers that share an enable pin will only be disabled for a miniscule time.	7 years ago
Scott Lahteine	55e9b85ad6	Clear the "Wait for user" message set by M0/M1 See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936	7 years ago
Scott Lahteine	b6a55f0891	Temporary workaround for tool-change compile error Pending a more complete solution to tool-change Z deviation.	7 years ago
Scott Lahteine	b852781eba	Fix BLTOUCH compile error Followup to #10250	7 years ago
AnHardt	c1f58a238d	No delay in sensorless quick homing (#10254 )	7 years ago

1 2 3 4 5 ...

8447 Commits (a29adde5c0706a572261c40a02c61e1c966928a4)