60adc6ff02
Display filwidth ratio in terms of E mm
7 years ago
6e533748eb
Fixes #8472
7 years ago
485abb023b
Merge pull request #8456 from thinkyhead/bf2_wednesday_tweaks
[2.0] No retroactive adjustment with M851 Z
7 years ago
ca6d408549
Merge pull request #8477 from thinkyhead/bf2_some_formatting
[2.0.x] Apply some formatting
7 years ago
3bba7d60f3
No retroactive changes with M851 Z
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
7 years ago
32512332df
Apply some formatting
7 years ago
7dacc999b9
Remove obsolete show_bootscreen var
7 years ago
9729528d13
Update UBL's Delta Probable locations
This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
7 years ago
d48cb6bf41
Apply coding standards to Max7219
7 years ago
1502b6ad8a
Merge pull request #8460 from Bob-the-Kuhn/E0-autofan
2.0.x E0 auto fan fixes for LP1768
7 years ago
7eea000f4b
E0 auto fan fixes
7 years ago
a7ff4f5799
Merge pull request #8455 from thinkyhead/bf2_filwidth_fix
[2.0] Fix Filament Width Sensor LCD display
7 years ago
b2dda096fe
Fix FILAMENT_LCD_DISPLAY for disabled state
7 years ago
1e8afb66b7
Fix a planner comment
7 years ago
50f09cc029
Miscellaneous cleanup
7 years ago
63257dc083
Fix M503 output for M145
Fixes #7978
7 years ago
166dbada91
Merge pull request #8438 from thinkyhead/bf2_thermistor_ov
[2.0] Add OV() macro for use in thermistor tables
7 years ago
0918dae66e
Add OV() macro for use in thermistor tables
7 years ago
24057270a3
Merge pull request #8420 from RowanMeara/rm-dithering-2.0.x
[2.0.x] Fix Software Fan PWM
7 years ago
5079a02c90
Add HAL_SERVO_LIB to HAL_Due.h
7 years ago
9c3761047e
Merge pull request #8434 from thinkyhead/bf2_fix_M32_subroutines
[2.0] Fix 'M32 P' subroutines
7 years ago
1c7b9f6d5d
Merge pull request #8433 from thinkyhead/bf2_fix_parser_value
[2.0] Fix parser value handling
7 years ago
e0d367f1fb
Fix M32 P subroutine handling
7 years ago
9f8b4c5ee8
Patch SD lib files for readability
7 years ago
2c8c30437e
Fix parser parameter value handling
7 years ago
6131533157
Change dithering behavior to intended.
7 years ago
e70b44dc0b
Make sure leveled[] is defined for later use
7 years ago
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
[2.0] Add M114_DETAIL to Configuration_adv.h
7 years ago
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
7 years ago
0c7a17a312
Merge pull request #8414 from thinkyhead/bf2_anet_cleanup
[2.0] Fix up REPRAPWORLD_KEYPAD defines
7 years ago
6d6c3b1e97
Fix up REPRAPWORLD_KEYPAD defines
7 years ago
d8199b5db9
Merge pull request #8410 from thinkyhead/bf2_fix_printrboard_pins
[2.0] Move test extrusion options under G26
7 years ago
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
7 years ago
b76e173205
Move test extrusion options under G26
7 years ago
705801880b
Merge pull request #8408 from thinkyhead/bf2_fix_printrboard_pins
[2.0] Support for Extrudrboard in Printrboard Rev.F
7 years ago
14ebedca27
Drop unused LARGE_FLASH option
7 years ago
b7feb53e8a
Support for Extrudrboard in Printrboard Rev.F
7 years ago
1b6c25a5e6
Merge pull request #8400 from thinkyhead/bf2_travis_tweaks
[2.0] Update Travis CI, fix compiler warnings
7 years ago
202a9b06d9
Update Travis CI to match 1.1.x
As modified in #8395
7 years ago
91baca6abb
Patches for compiler warnings/errors
7 years ago
98efc18f2c
Merge pull request #8399 from thinkyhead/bf2_fix_M428
[2.0] Improve and clarify M428 code
7 years ago
2f73dec077
Apply native workspace fixes for G92, G53-59
7 years ago
04abd8d459
Improve and clarify M428 code
7 years ago
c009a990e4
[2.0.x] Fix some 8-bit Teensyduino compile warnings ( #8385 )
* Fix some 8-bit Teensyduino compile warnings
-Override Teensyduino legacy NOT_A_PIN 127 define
-some fixups for Printrboard_RevF pins
* Proper cleanup of Printrboard Rev.F pins
* Apply LCD fixes to Printrboard v1
7 years ago
e8e92f8969
No leveling data in M114 if no leveling is enabled
7 years ago
f5d210c35c
Fix report_current_position
7 years ago
faaae7a1b2
Provide more clearance for BL-Touch probe
7 years ago
e1e68e4c95
Merge pull request #8382 from thinkyhead/bf2_native_followup
[2.0] Remove offsets from soft endstops, tool change
7 years ago
06ee6584fd
Remove offsets from soft endstops, tool change
7 years ago
c938273bd5
Coding standard patch of M290
7 years ago
Scott Lahteine
Scott Lahteine
Roxy-3D
Bob-the-Kuhn
RowanMeara
Dave Johnson