Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1443 lines
51 KiB

#
# Marlin Firmware
# PlatformIO Configuration File
#
# For detailed documentation with EXAMPLES:
#
# https://docs.platformio.org/en/latest/projectconf/index.html
#
# Automatic targets - enable auto-uploading
#targets = upload
#
# By default platformio build will abort after 5 errors.
# Remove '-fmax-errors=5' from build_flags below to see all.
#
[platformio]
src_dir = Marlin
boards_dir = buildroot/share/PlatformIO/boards
default_envs = mega2560
include_dir = Marlin
#
# The 'common' values are used for most Marlin builds
#
[common]
default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
4 years ago
-<src/lcd/HD44780> -<src/lcd/TFTGLCD> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft> -<src/lcd/tft_io>
-<src/HAL/STM32/tft> -<src/HAL/STM32F1/tft>
-<src/lcd/menu>
-<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
-<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
-<src/lcd/menu/menu_backlash.cpp>
-<src/lcd/menu/menu_bed_corners.cpp>
-<src/lcd/menu/menu_bed_leveling.cpp>
-<src/lcd/menu/menu_cancelobject.cpp>
-<src/lcd/menu/menu_delta_calibrate.cpp>
-<src/lcd/menu/menu_filament.cpp>
-<src/lcd/menu/menu_info.cpp>
-<src/lcd/menu/menu_job_recovery.cpp>
-<src/lcd/menu/menu_led.cpp>
-<src/lcd/menu/menu_media.cpp>
-<src/lcd/menu/menu_mmu2.cpp>
-<src/lcd/menu/menu_password.cpp>
-<src/lcd/menu/menu_power_monitor.cpp>
-<src/lcd/menu/menu_spindle_laser.cpp>
-<src/lcd/menu/menu_temperature.cpp>
-<src/lcd/menu/menu_tmc.cpp>
-<src/lcd/menu/menu_touch_screen.cpp>
-<src/lcd/menu/menu_tramming.cpp>
-<src/lcd/menu/menu_ubl.cpp>
-<src/lcd/extui/lib/mks_ui>
-<src/lcd/extui/lib/dgus> -<src/lcd/extui/dgus_lcd.cpp>
-<src/lcd/extui/example.cpp>
-<src/lcd/extui/malyan_lcd.cpp>
-<src/lcd/extui/lib/ftdi_eve_touch_ui>
-<src/lcd/extui/anycubic_chiron_lcd.cpp> -<src/lcd/extui/lib/anycubic_chiron>
4 years ago
-<src/lcd/extui/anycubic_i3mega_lcd.cpp> -<src/lcd/extui/lib/anycubic_i3mega>
-<src/lcd/lcdprint.cpp>
-<src/lcd/touch/touch_buttons.cpp>
-<src/sd/usb_flashdrive>
-<src/HAL/shared/backtrace>
-<src/feature/babystep.cpp>
-<src/feature/backlash.cpp>
-<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda>
-<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl>
-<src/feature/bedlevel/mbl> -<src/gcode/bedlevel/mbl>
-<src/feature/bedlevel/ubl> -<src/gcode/bedlevel/ubl>
-<src/feature/binary_stream.cpp> -<src/libs/heatshrink>
-<src/feature/bltouch.cpp>
-<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel>
-<src/feature/caselight.cpp> -<src/gcode/feature/caselight>
-<src/feature/closedloop.cpp>
-<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan>
-<src/feature/dac> -<src/feature/digipot>
-<src/feature/direct_stepping.cpp> -<src/gcode/motion/G6.cpp>
-<src/feature/e_parser.cpp>
-<src/feature/encoder_i2c.cpp>
-<src/feature/ethernet.cpp>
-<src/feature/fanmux.cpp>
-<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth>
-<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract>
-<src/feature/host_actions.cpp>
-<src/feature/hotend_idle.cpp>
-<src/feature/joystick.cpp>
-<src/feature/leds/blinkm.cpp>
-<src/feature/leds/leds.cpp>
-<src/feature/leds/neopixel.cpp>
-<src/feature/leds/pca9533.cpp>
-<src/feature/leds/pca9632.cpp>
-<src/feature/leds/printer_event_leds.cpp>
-<src/feature/leds/tempstat.cpp>
-<src/feature/max7219.cpp>
-<src/feature/mixing.cpp>
-<src/feature/mmu/mmu.cpp>
-<src/feature/mmu/mmu2.cpp> -<src/gcode/feature/prusa_MMU2>
-<src/feature/password> -<src/gcode/feature/password>
-<src/feature/pause.cpp>
-<src/feature/power.cpp>
-<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
-<src/feature/powerloss.cpp> -<src/gcode/feature/powerloss>
-<src/feature/probe_temp_comp.cpp>
-<src/feature/runout.cpp> -<src/gcode/feature/runout>
-<src/feature/solenoid.cpp> -<src/gcode/control/M380_M381.cpp>
-<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp>
-<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp>
-<src/feature/twibus.cpp>
-<src/feature/z_stepper_align.cpp>
-<src/gcode/bedlevel/G26.cpp>
-<src/gcode/bedlevel/G35.cpp>
-<src/gcode/bedlevel/G42.cpp>
-<src/gcode/bedlevel/M420.cpp>
-<src/gcode/calibrate/G33.cpp>
-<src/gcode/calibrate/G34.cpp>
-<src/gcode/calibrate/G34_M422.cpp>
-<src/gcode/calibrate/G76_M192_M871.cpp>
-<src/gcode/calibrate/G425.cpp>
-<src/gcode/calibrate/M12.cpp>
-<src/gcode/calibrate/M48.cpp>
-<src/gcode/calibrate/M100.cpp>
-<src/gcode/calibrate/M425.cpp>
-<src/gcode/calibrate/M666.cpp>
-<src/gcode/calibrate/M852.cpp>
-<src/gcode/control/M42.cpp> -<src/gcode/control/M226.cpp>
-<src/gcode/config/M43.cpp>
-<src/gcode/config/M217.cpp>
-<src/gcode/config/M218.cpp>
-<src/gcode/config/M221.cpp>
-<src/gcode/config/M281.cpp>
-<src/gcode/config/M301.cpp>
-<src/gcode/config/M302.cpp>
-<src/gcode/config/M304.cpp>
-<src/gcode/config/M305.cpp>
-<src/gcode/config/M540.cpp>
-<src/gcode/config/M575.cpp>
-<src/gcode/config/M672.cpp>
-<src/gcode/control/M7-M9.cpp>
-<src/gcode/control/M211.cpp>
-<src/gcode/control/M605.cpp>
-<src/gcode/feature/advance>
-<src/gcode/feature/camera>
-<src/gcode/feature/i2c>
-<src/gcode/feature/L6470>
-<src/gcode/feature/leds/M150.cpp>
-<src/gcode/feature/leds/M7219.cpp>
-<src/gcode/feature/macro>
-<src/gcode/feature/mixing/M163-M165.cpp>
-<src/gcode/feature/mixing/M166.cpp>
-<src/gcode/feature/pause/G27.cpp>
-<src/gcode/feature/pause/G60.cpp>
-<src/gcode/feature/pause/G61.cpp>
-<src/gcode/feature/pause/M125.cpp>
-<src/gcode/feature/pause/M600.cpp>
-<src/gcode/feature/pause/M603.cpp>
-<src/gcode/feature/pause/M701_M702.cpp>
-<src/gcode/feature/trinamic/M122.cpp>
-<src/gcode/feature/trinamic/M569.cpp>
-<src/gcode/feature/trinamic/M906.cpp>
-<src/gcode/feature/trinamic/M911-M914.cpp>
-<src/gcode/geometry/G17-G19.cpp>
-<src/gcode/geometry/G53-G59.cpp>
-<src/gcode/geometry/M206_M428.cpp>
-<src/gcode/host/M16.cpp>
-<src/gcode/host/M113.cpp>
-<src/gcode/host/M360.cpp>
-<src/gcode/host/M876.cpp>
-<src/gcode/lcd/M0_M1.cpp>
-<src/gcode/lcd/M250.cpp>
-<src/gcode/lcd/M73.cpp>
-<src/gcode/lcd/M995.cpp>
-<src/gcode/motion/G2_G3.cpp>
-<src/gcode/motion/G5.cpp>
-<src/gcode/motion/G80.cpp>
-<src/gcode/motion/M290.cpp>
-<src/gcode/probe/G30.cpp>
-<src/gcode/probe/G31_G32.cpp>
-<src/gcode/probe/G38.cpp>
-<src/gcode/probe/M401_M402.cpp>
-<src/gcode/probe/M851.cpp>
-<src/gcode/probe/M951.cpp>
-<src/gcode/scara>
-<src/gcode/sd>
-<src/gcode/sd/M32.cpp>
-<src/gcode/temp/M104_M109.cpp>
-<src/gcode/temp/M155.cpp>
-<src/gcode/units/G20_G21.cpp>
-<src/gcode/units/M149.cpp>
-<src/libs/BL24CXX.cpp> -<src/libs/W25Qxx.cpp>
-<src/libs/L64XX> -<src/module/stepper/L64xx.cpp>
-<src/libs/hex_print.cpp>
-<src/libs/least_squares_fit.cpp>
-<src/libs/nozzle.cpp> -<src/gcode/feature/clean>
-<src/module/delta.cpp>
-<src/module/planner_bezier.cpp>
-<src/module/printcounter.cpp>
-<src/module/probe.cpp>
-<src/module/scara.cpp> -<src/gcode/calibrate/M665.cpp>
-<src/module/stepper/TMC26X.cpp>
extra_scripts =
pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
post:buildroot/share/PlatformIO/scripts/common-dependencies-post.py
build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__ -fmerge-all-constants
lib_deps =
#
# Feature Dependencies
#
[features]
HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip
src_filter=+<src/lcd/extui/lib/mks_ui>
extra_scripts=download_mks_assets.py
HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1
src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
HAS_STEALTHCHOP = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
SR_LCD_3W_NL = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
HAS_MOTOR_CURRENT_I2C = SlowSoftI2CMaster
src_filter=+<src/feature/digipot>
HAS_TMC26X = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter=+<src/module/TMC26X.cpp>
HAS_L64XX = Arduino-L6470@0.8.0
src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470>
NEOPIXEL_LED = Adafruit NeoPixel@1.5.0
src_filter=+<src/feature/leds/neopixel.cpp>
MAX6675_._IS_MAX31865 = Adafruit MAX31865 library@~1.1.0
USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0
USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4
USES_LIQUIDTWI2 = LiquidTWI2@1.2.7
HAS_WIRED_LCD = src_filter=+<src/lcd/lcdprint.cpp>
HAS_MARLINUI_HD44780 = src_filter=+<src/lcd/HD44780>
HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1
src_filter=+<src/lcd/dogm>
TFT Refactoring (#19192) * split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
4 years ago
HAS_(FSMC|SPI)_TFT = src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
HAS_FSMC_TFT = src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
HAS_SPI_TFT = src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
HAS_GRAPHICAL_TFT = src_filter=+<src/lcd/tft>
DWIN_CREALITY_LCD = src_filter=+<src/lcd/dwin>
IS_TFTGLCD_PANEL = src_filter=+<src/lcd/TFTGLCD>
HAS_TOUCH_BUTTONS = src_filter=+<src/lcd/touch/touch_buttons.cpp>
HAS_LCD_MENU = src_filter=+<src/lcd/menu>
HAS_GAMES = src_filter=+<src/lcd/menu/game/game.cpp>
MARLIN_BRICKOUT = src_filter=+<src/lcd/menu/game/brickout.cpp>
MARLIN_INVADERS = src_filter=+<src/lcd/menu/game/invaders.cpp>
MARLIN_MAZE = src_filter=+<src/lcd/menu/game/maze.cpp>
MARLIN_SNAKE = src_filter=+<src/lcd/menu/game/snake.cpp>
HAS_MENU_BACKLASH = src_filter=+<src/lcd/menu/menu_backlash.cpp>
HAS_MENU_BED_CORNERS = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
LCD_BED_LEVELING = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
HAS_MENU_CANCELOBJECT = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
HAS_MENU_DELTA_CALIBRATE = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
HAS_MENU_FILAMENT = src_filter=+<src/lcd/menu/menu_filament.cpp>
LCD_INFO_MENU = src_filter=+<src/lcd/menu/menu_info.cpp>
HAS_MENU_JOB_RECOVERY = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
HAS_MENU_LED = src_filter=+<src/lcd/menu/menu_led.cpp>
HAS_MENU_MEDIA = src_filter=+<src/lcd/menu/menu_media.cpp>
HAS_MENU_MIXER = src_filter=+<src/lcd/menu/menu_mixer.cpp>
HAS_MENU_MMU2 = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
HAS_MENU_PASSWORD = src_filter=+<src/lcd/menu/menu_password.cpp>
HAS_MENU_POWER_MONITOR = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
HAS_MENU_CUTTER = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
HAS_MENU_TEMPERATURE = src_filter=+<src/lcd/menu/menu_temperature.cpp>
HAS_MENU_TMC = src_filter=+<src/lcd/menu/menu_tmc.cpp>
HAS_MENU_TOUCH_SCREEN = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
HAS_MENU_TRAMMING = src_filter=+<src/lcd/menu/menu_tramming.cpp>
HAS_MENU_UBL = src_filter=+<src/lcd/menu/menu_ubl.cpp>
ANYCUBIC_LCD_CHIRON = src_filter=+<src/lcd/extui/anycubic_chiron_lcd.cpp> +<src/lcd/extui/lib/anycubic_chiron>
ANYCUBIC_LCD_I3MEGA = src_filter=+<src/lcd/extui/anycubic_i3mega_lcd.cpp> +<src/lcd/extui/lib/anycubic_i3mega>
HAS_DGUS_LCD = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui/dgus_lcd.cpp>
TOUCH_UI_FTDI_EVE = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
EXTUI_EXAMPLE = src_filter=+<src/lcd/extui/example.cpp>
MALYAN_LCD = src_filter=+<src/lcd/extui/malyan_lcd.cpp>
USB_FLASH_DRIVE_SUPPORT = src_filter=+<src/sd/usb_flashdrive>
AUTO_BED_LEVELING_BILINEAR = src_filter=+<src/feature/bedlevel/abl>
AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
MESH_BED_LEVELING = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
AUTO_BED_LEVELING_UBL = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
BACKLASH_COMPENSATION = src_filter=+<src/feature/backlash.cpp>
BARICUDA = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
BINARY_FILE_TRANSFER = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
BLTOUCH = src_filter=+<src/feature/bltouch.cpp>
CANCEL_OBJECTS = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
USE_CONTROLLER_FAN = src_filter=+<src/feature/controllerfan.cpp>
HAS_MOTOR_CURRENT_DAC = src_filter=+<src/feature/dac>
DIRECT_STEPPING = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
EMERGENCY_PARSER = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
I2C_POSITION_ENCODERS = src_filter=+<src/feature/encoder_i2c.cpp>
IIC_BL24CXX_EEPROM = src_filter=+<src/libs/BL24CXX.cpp>
HAS_SPI_FLASH = src_filter=+<src/libs/W25Qxx.cpp>
HAS_ETHERNET = src_filter=+<src/feature/ethernet.cpp>
HAS_FANMUX = src_filter=+<src/feature/fanmux.cpp>
FILAMENT_WIDTH_SENSOR = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
FWRETRACT = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
HOST_ACTION_COMMANDS = src_filter=+<src/feature/host_actions.cpp>
HOTEND_IDLE_TIMEOUT = src_filter=+<src/feature/hotend_idle.cpp>
JOYSTICK = src_filter=+<src/feature/joystick.cpp>
BLINKM = src_filter=+<src/feature/leds/blinkm.cpp>
HAS_COLOR_LEDS = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
PCA9533 = src_filter=+<src/feature/leds/pca9533.cpp>
PCA9632 = src_filter=+<src/feature/leds/pca9632.cpp>
PRINTER_EVENT_LEDS = src_filter=+<src/feature/leds/printer_event_leds.cpp>
TEMP_STAT_LEDS = src_filter=+<src/feature/leds/tempstat.cpp>
MAX7219_DEBUG = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
MIXING_EXTRUDER = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
HAS_PRUSA_MMU1 = src_filter=+<src/feature/mmu/mmu.cpp>
HAS_PRUSA_MMU2 = src_filter=+<src/feature/mmu/mmu2.cpp> +<src/gcode/feature/prusa_MMU2>
PASSWORD_FEATURE = src_filter=+<src/feature/password> +<src/gcode/feature/password>
ADVANCED_PAUSE_FEATURE = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
AUTO_POWER_CONTROL = src_filter=+<src/feature/power.cpp>
HAS_POWER_MONITOR = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
POWER_LOSS_RECOVERY = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M192_M871.cpp>
HAS_FILAMENT_SENSOR = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
(EXT|MANUAL)_SOLENOID.* = src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
HAS_CUTTER = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
EXPERIMENTAL_I2CBUS = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
MECHANICAL_GANTRY_CAL.+ = src_filter=+<src/gcode/calibrate/G34.cpp>
Z_MULTI_ENDSTOPS = src_filter=+<src/gcode/calibrate/G34_M422.cpp>
Z_STEPPER_AUTO_ALIGN = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
G26_MESH_VALIDATION = src_filter=+<src/gcode/bedlevel/G26.cpp>
ASSISTED_TRAMMING = src_filter=+<src/gcode/bedlevel/G35.cpp>
HAS_MESH = src_filter=+<src/gcode/bedlevel/G42.cpp>
HAS_LEVELING = src_filter=+<src/gcode/bedlevel/M420.cpp>
DELTA_AUTO_CALIBRATION = src_filter=+<src/gcode/calibrate/G33.cpp>
CALIBRATION_GCODE = src_filter=+<src/gcode/calibrate/G425.cpp>
Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+<src/gcode/calibrate/M48.cpp>
M100_FREE_MEMORY_WATCHER = src_filter=+<src/gcode/calibrate/M100.cpp>
BACKLASH_GCODE = src_filter=+<src/gcode/calibrate/M425.cpp>
IS_KINEMATIC = src_filter=+<src/gcode/calibrate/M665.cpp>
HAS_EXTRA_ENDSTOPS = src_filter=+<src/gcode/calibrate/M666.cpp>
SKEW_CORRECTION_GCODE = src_filter=+<src/gcode/calibrate/M852.cpp>
DIRECT_PIN_CONTROL = src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
PINS_DEBUGGING = src_filter=+<src/gcode/config/M43.cpp>
NO_VOLUMETRICS = src_filter=-<src/gcode/config/M200-M205.cpp>
HAS_MULTI_EXTRUDER = src_filter=+<src/gcode/config/M217.cpp>
HAS_HOTEND_OFFSET = src_filter=+<src/gcode/config/M218.cpp>
EDITABLE_SERVO_ANGLES = src_filter=+<src/gcode/config/M281.cpp>
PIDTEMP = src_filter=+<src/gcode/config/M301.cpp>
PREVENT_COLD_EXTRUSION = src_filter=+<src/gcode/config/M302.cpp>
PIDTEMPBED = src_filter=+<src/gcode/config/M304.cpp>
HAS_USER_THERMISTORS = src_filter=+<src/gcode/config/M305.cpp>
SD_ABORT_ON_ENDSTOP_HIT = src_filter=+<src/gcode/config/M540.cpp>
BAUD_RATE_GCODE = src_filter=+<src/gcode/config/M575.cpp>
HAS_SMART_EFF_MOD = src_filter=+<src/gcode/config/M672.cpp>
COOLANT_CONTROL = src_filter=+<src/gcode/control/M7-M9.cpp>
HAS_SOFTWARE_ENDSTOPS = src_filter=+<src/gcode/control/M211.cpp>
HAS_DUPLICATION_MODE = src_filter=+<src/gcode/control/M605.cpp>
LIN_ADVANCE = src_filter=+<src/gcode/feature/advance>
PHOTO_GCODE = src_filter=+<src/gcode/feature/camera>
CONTROLLER_FAN_EDITABLE = src_filter=+<src/gcode/feature/controllerfan>
GCODE_MACROS = src_filter=+<src/gcode/feature/macro>
GRADIENT_MIX = src_filter=+<src/gcode/feature/mixing/M166.cpp>
HAS_SAVED_POSITIONS = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
PARK_HEAD_ON_PAUSE = src_filter=+<src/gcode/feature/pause/M125.cpp>
FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
CNC_WORKSPACE_PLANES = src_filter=+<src/gcode/geometry/G17-G19.cpp>
CNC_COORDINATE_SYSTEMS = src_filter=+<src/gcode/geometry/G53-G59.cpp>
HAS_M206_COMMAND = src_filter=+<src/gcode/geometry/M206_M428.cpp>
EXPECTED_PRINTER_CHECK = src_filter=+<src/gcode/host/M16.cpp>
HOST_KEEPALIVE_FEATURE = src_filter=+<src/gcode/host/M113.cpp>
REPETIER_GCODE_M360 = src_filter=+<src/gcode/host/M360.cpp>
HAS_GCODE_M876 = src_filter=+<src/gcode/host/M876.cpp>
HAS_RESUME_CONTINUE = src_filter=+<src/gcode/lcd/M0_M1.cpp>
HAS_LCD_CONTRAST = src_filter=+<src/gcode/lcd/M250.cpp>
LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>
ARC_SUPPORT = src_filter=+<src/gcode/motion/G2_G3.cpp>
GCODE_MOTION_MODES = src_filter=+<src/gcode/motion/G80.cpp>
BABYSTEPPING = src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
Z_PROBE_SLED = src_filter=+<src/gcode/probe/G31_G32.cpp>
G38_PROBE_TARGET = src_filter=+<src/gcode/probe/G38.cpp>
MAGNETIC_PARKING_EXTRUDER = src_filter=+<src/gcode/probe/M951.cpp>
SDSUPPORT = src_filter=+<src/gcode/sd>
HAS_MEDIA_SUBCALLS = src_filter=+<src/gcode/sd/M32.cpp>
HAS_EXTRUDERS = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
NEED_HEX_PRINT = src_filter=+<src/libs/hex_print.cpp>
NEED_LSF = src_filter=+<src/libs/least_squares_fit.cpp>
NOZZLE_PARK_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
NOZZLE_CLEAN_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
DELTA = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
BEZIER_CURVE_SUPPORT = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
PRINTCOUNTER = src_filter=+<src/module/printcounter.cpp>
HAS_BED_PROBE = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
IS_SCARA = src_filter=+<src/module/scara.cpp>
MORGAN_SCARA = src_filter=+<src/gcode/scara>
(ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer
ESP3DLib=https://github.com/luc-github/ESP3DLib.git
arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git
ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git
lib_ignore=ESPAsyncTCP
#
# Default values apply to all 'env:' prefixed environments
#
[env]
framework = arduino
extra_scripts = ${common.extra_scripts}
build_flags = ${common.build_flags}
lib_deps = ${common.lib_deps}
monitor_speed = 250000
monitor_flags =
--quiet
--echo
--eol
LF
--filter
colorize
--filter
time
#################################
# #
# Unique Core Architectures #
# #
# Add a new "env" below if no #
# entry has values suitable to #
# build for a given board. #
# #
#################################
#################################
# #
# AVR Architecture #
# #
#################################
#
# AVR (8-bit) Common Environment values
#
[common_avr8]
board_build.f_cpu = 16000000L
src_filter = ${common.default_src_filter} +<src/HAL/AVR>
#
# ATmega2560
#
[env:mega2560]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
#
# ATmega2560 with extended pins 70-85 defined
# BOARD_BQ_ZUM_MEGA_3D
# BOARD_ULTIMAIN_2
# BOARD_MIGHTYBOARD_REVE
# BOARD_EINSTART_S
#
[env:mega2560ext]
platform = atmelavr
extends = env:mega2560
board = megaatmega2560
board_build.variant = megaextendedpins
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
#
# ATmega1280
#
[env:mega1280]
platform = atmelavr
extends = common_avr8
board = megaatmega1280
#
# MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
#
[env:MightyBoard1280]
platform = atmelavr
extends = common_avr8
board = ATmega1280
upload_speed = 57600
#
# MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
#
[env:MightyBoard2560]
platform = atmelavr
extends = common_avr8
board = ATmega2560
upload_protocol = wiring
upload_speed = 57600
board_upload.maximum_size = 253952
#
# RAMBo
#
[env:rambo]
platform = atmelavr
extends = common_avr8
board = reprap_rambo
#
# FYSETC F6 V1.3
#
[env:FYSETC_F6_13]
platform = atmelavr
extends = common_avr8
board = fysetc_f6_13
#
# FYSETC F6 V1.4
#
[env:FYSETC_F6_14]
platform = atmelavr
extends = common_avr8
board = fysetc_f6_14
#
# Sanguinololu (ATmega644p)
#
[env:sanguino644p]
platform = atmelavr
extends = common_avr8
board = sanguino_atmega644p
#
# Sanguinololu (ATmega1284p)
#
[env:sanguino1284p]
platform = atmelavr
extends = common_avr8
board = sanguino_atmega1284p
board_upload.maximum_size = 126976
#
# Melzi and clones (ATmega1284p)
#
[env:melzi]
platform = atmelavr
extends = env:sanguino1284p
upload_speed = 57600
#
# Sanguinololu (ATmega1284p stock bootloader with tuned flags)
#
[tuned_1284p]
build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues
[env:sanguino1284p_optimized]
platform = atmelavr
extends = env:melzi
build_flags = ${tuned_1284p.build_flags}
#
# Melzi and clones (alias for sanguino1284p_optimized)
#
[env:melzi_optimized]
platform = atmelavr
extends = env:sanguino1284p_optimized
#
# Melzi and clones (Optiboot bootloader)
#
[env:melzi_optiboot]
platform = atmelavr
extends = common_avr8
board = sanguino_atmega1284p
upload_speed = 115200
#
# Melzi and clones (Zonestar Melzi2 with tuned flags)
#
[env:melzi_optiboot_optimized]
platform = atmelavr
extends = env:melzi_optiboot
build_flags = ${tuned_1284p.build_flags}
#
# AT90USB1286 boards using CDC bootloader
# - BRAINWAVE
# - BRAINWAVE_PRO
# - SAV_MKI
# - TEENSYLU
#
[env:at90usb1286_cdc]
platform = teensy
extends = common_avr8
board = at90usb1286
lib_ignore = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet
#
# AT90USB1286 boards using DFU bootloader
# - PrintrBoard
# - PrintrBoard Rev.F
# - ? 5DPRINT ?
#
[env:at90usb1286_dfu]
platform = teensy
extends = env:at90usb1286_cdc
#################################
# #
# DUE Architecture #
# #
#################################
#
# Due (Atmel SAM3X8E ARM Cortex-M3)
#
# - RAMPS4DUE
# - RADDS
#
[env:DUE]
platform = atmelsam
board = due
src_filter = ${common.default_src_filter} +<src/HAL/DUE> +<src/HAL/shared/backtrace>
[env:DUE_USB]
platform = atmelsam
extends = env:DUE
board = dueUSB
[env:DUE_debug]
# Used when WATCHDOG_RESET_MANUAL is enabled
platform = atmelsam
extends = env:DUE
build_flags = ${common.build_flags}
-funwind-tables
-mpoke-function-name
#
# Archim SAM
#
[common_DUE_archim]
platform = atmelsam
extends = env:DUE
board = archim
build_flags = ${common.build_flags}
-DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON
board_build.variants_dir = buildroot/share/PlatformIO/variants/
extra_scripts = ${common.extra_scripts}
Marlin/src/HAL/DUE/upload_extra_script.py
[env:DUE_archim]
platform = ${common_DUE_archim.platform}
extends = common_DUE_archim
# Used when WATCHDOG_RESET_MANUAL is enabled
[env:DUE_archim_debug]
platform = ${common_DUE_archim.platform}
extends = common_DUE_archim
build_flags = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name
#################################
# #
# SAMD51 Architecture #
# #
#################################
#
# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
#
[env:SAMD51_grandcentral_m4]
platform = atmelsam
board = adafruit_grandcentral_m4
build_flags = ${common.build_flags} -std=gnu++17
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/SAMD51>
lib_deps = ${common.lib_deps}
SoftwareSerialM
4 years ago
Adafruit SPIFlash
custom_marlin.SDSUPPORT = SdFat - Adafruit Fork
debug_tool = jlink
#################################
# #
# LPC176x Architecture #
# #
#################################
#
# NXP LPC176x ARM Cortex-M3
#
[common_LPC]
platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip
platform_packages = framework-arduino-lpc176x@^0.2.5
board = nxp_lpc1768
lib_ldf_mode = off
lib_compat_mode = strict
extra_scripts = ${common.extra_scripts}
Marlin/src/HAL/LPC1768/upload_extra_script.py
src_filter = ${common.default_src_filter} +<src/HAL/LPC1768> +<src/HAL/shared/backtrace>
lib_deps = ${common.lib_deps}
Servo
custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0
custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
build_flags = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g
# debug options for backtrace
#-funwind-tables
#-mpoke-function-name
#
# NXP LPC176x ARM Cortex-M3
#
[env:LPC1768]
platform = ${common_LPC.platform}
extends = common_LPC
board = nxp_lpc1768
[env:LPC1769]
platform = ${common_LPC.platform}
extends = common_LPC
board = nxp_lpc1769
#################################
# #
# STM32 Architecture #
# #
#################################
#
# HAL/STM32 Base Environment values
#
[common_stm32]
platform = ststm32@~8.0
build_flags = ${common.build_flags}
-std=gnu++14
-DUSBCON -DUSBD_USE_CDC
-DTIM_IRQ_PRIO=13
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>
#
# HAL/STM32F1 Common Environment values
#
[common_stm32f1]
platform = ststm32@~6.1
build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
${common.build_flags}
build_unflags = -std=gnu11 -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/STM32F1>
lib_ignore = SPI
lib_deps = ${common.lib_deps}
SoftwareSerialM
7 years ago
#
# STM32F103RC
7 years ago
#
[env:STM32F103RC]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103RC
platform_packages = tool-stm32duino
monitor_speed = 115200
7 years ago
#
# MEEB_3DP (STM32F103RCT6 with 512K)
#
[env:STM32F103RC_meeb]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = MEEB_3DP
platform_packages = tool-stm32duino
build_flags = ${common_stm32f1.build_flags}
-DDEBUG_LEVEL=0
-DSS_TIMER=4
-DSTM32_FLASH_SIZE=512
-DHSE_VALUE=12000000U
-DUSE_USB_COMPOSITE
-DVECT_TAB_OFFSET=0x2000
-DGENERIC_BOOTLOADER
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
lib_deps = ${common.lib_deps}
SoftwareSerialM
USBComposite for STM32F1@0.91
custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
debug_tool = stlink
upload_protocol = dfu
#
# STM32F103RC_fysetc
#
[env:STM32F103RC_fysetc]
platform = ${common_stm32f1.platform}
extends = env:STM32F103RC
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0
lib_ldf_mode = chain
debug_tool = stlink
upload_protocol = serial
#
# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
#
# STM32F103RC_btt ............. RCT6 with 256K
# STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
# STM32F103RC_btt_512K ........ RCT6 with 512K
# STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage)
#
# WARNING! If you have an SKR Mini v1.1 or an SKR Mini E3 1.0 / 1.2 / 2.0 / DIP
# and experience a printer freeze, re-flash Marlin using the regular (non-512K)
# build option. 256K chips may be re-branded 512K chips, but this means the
# upper 256K is sketchy, and failure is very likely.
#
[env:STM32F103RC_btt]
platform = ${common_stm32f1.platform}
extends = env:STM32F103RC
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
build_flags = ${common_stm32f1.build_flags}
-DDEBUG_LEVEL=0 -DSS_TIMER=4
monitor_speed = 115200
[env:STM32F103RC_btt_USB]
platform = ${common_stm32f1.platform}
extends = env:STM32F103RC_btt
build_flags = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE
lib_deps = ${env:STM32F103RC_btt.lib_deps}
USBComposite for STM32F1@0.91
[env:STM32F103RC_btt_512K]
platform = ${common_stm32f1.platform}
extends = env:STM32F103RC_btt
board_upload.maximum_size=524288
build_flags = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512
[env:STM32F103RC_btt_512K_USB]
platform = ${common_stm32f1.platform}
extends = env:STM32F103RC_btt_512K
build_flags = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE
lib_deps = ${env:STM32F103RC_btt_512K.lib_deps}
USBComposite for STM32F1@0.91
#
# STM32F103RE
#
[env:STM32F103RE]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103RE
platform_packages = tool-stm32duino
monitor_speed = 115200
#
# STM32F103RE_btt ............. RET6
# STM32F103RE_btt_USB ......... RET6 (USB mass storage)
#
[env:STM32F103RE_btt]
platform = ${common_stm32f1.platform}
extends = env:STM32F103RE
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py
build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4
debug_tool = stlink
upload_protocol = stlink
[env:STM32F103RE_btt_USB]
platform = ${common_stm32f1.platform}
extends = env:STM32F103RE_btt
build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE
lib_deps = ${common_stm32f1.lib_deps}
USBComposite for STM32F1@0.91
#
# STM32F4 with STM32GENERIC
#
[env:STM32F4]
platform = ${common_stm32.platform}
board = disco_f407vg
build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
src_filter = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F7>
#
# STM32F7 with STM32GENERIC
#
[env:STM32F7]
platform = ${common_stm32.platform}
board = remram_v1
build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
src_filter = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F4>
#
# ST NUCLEO-F767ZI Development Board
# This environment is for testing purposes prior to control boards
# being readily available based on STM32F7 MCUs
#
[env:NUCLEO_F767ZI]
platform = ${common_stm32.platform}
extends = common_stm32
board = nucleo_f767zi
build_flags = ${common_stm32.build_flags} -DTIMER_SERIAL=TIM9
#
# ARMED (STM32)
#
[env:ARMED]
platform = ${common_stm32.platform}
extends = common_stm32
board = armed_v1
build_flags = ${common_stm32.build_flags}
-O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
#
# Geeetech GTM32 (STM32F103VET6)
#
[env:STM32F103VE_GTM32]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103VE
build_flags = ${common_stm32f1.build_flags}
-ffunction-sections -fdata-sections -nostdlib -MMD
-DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v
-DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000
-DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
upload_protocol = serial
#
# Longer 3D board in Alfawise U20 (STM32F103VET6)
#
[env:STM32F103VE_longer]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103VE
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
build_unflags = ${common_stm32f1.build_unflags}
-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
lib_ignore = ${common_stm32f1.lib_ignore}
#
# MKS Robin Mini (STM32F103VET6)
#
[env:mks_robin_mini]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103VE
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_mini.py
build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103VE
#
# MKS Robin Nano (STM32F103VET6)
#
[env:mks_robin_nano35]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103VE
platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103VE -DSS_TIMER=4
debug_tool = jlink
upload_protocol = jlink
#
# MKS Robin (STM32F103ZET6)
#
[env:mks_robin]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103ZE
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin.py
build_flags = ${common_stm32f1.build_flags}
-DSS_TIMER=4 -DSTM32_XL_DENSITY
# MKS Robin (STM32F103ZET6)
# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
#
[env:mks_robin_stm32]
platform = ${common_stm32.platform}
extends = common_stm32
board = genericSTM32F103ZE
board_build.core = stm32
board_build.variant = MARLIN_F103Zx
board_build.ldscript = ldscript.ld
board_build.offset = 0x7000
board_build.firmware = Robin.bin
build_flags = ${common_stm32.build_flags}
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
build_unflags = ${common_stm32.build_unflags}
-DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/mks_encrypt.py
lib_deps =
#
# MKS Robin Pro (STM32F103ZET6)
#
[env:mks_robin_pro]
platform = ${common_stm32f1.platform}
extends = env:mks_robin
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_pro.py
#
# TRIGORILLA PRO (STM32F103ZET6)
#
[env:trigorilla_pro]
platform = ${common_stm32f1.platform}
extends = env:mks_robin
extra_scripts = ${common.extra_scripts}
#
# MKS Robin E3D (STM32F103RCT6) and
# MKS Robin E3 with TMC2209
#
[env:mks_robin_e3]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_e3.py
build_flags = ${common_stm32f1.build_flags}
-DDEBUG_LEVEL=0 -DSS_TIMER=4
#
# MKS Robin E3p (STM32F103VET6)
# - LVGL UI
#
[env:mks_robin_e3p]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103VE
platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_e3p.py
build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103VE -DSS_TIMER=4
debug_tool = jlink
upload_protocol = jlink
#
# MKS Robin Lite/Lite2 (STM32F103RCT6)
#
[env:mks_robin_lite]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103RC
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_lite.py
#
# MKS ROBIN LITE3 (STM32F103RCT6)
#
[env:mks_robin_lite3]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103RC
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
#
# JGAurora A5S A1 (STM32F103ZET6)
#
[env:jgaurora_a5s_a1]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103ZE
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
build_flags = ${common_stm32f1.build_flags}
-DSTM32F1xx -DSTM32_XL_DENSITY
#
# Malyan M200 (STM32F103CB)
#
[env:STM32F103CB_malyan]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = malyanM200
build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections
-Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
lib_ignore = ${common_stm32f1.lib_ignore}
SoftwareSerialM
#
# Malyan M200 v2 (STM32F070RB)
#
[env:STM32F070RB_malyan]
platform = ${common_stm32.platform}
extends = common_stm32
board = malyanM200v2
build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED
-O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
-DCUSTOM_STARTUP_FILE
#
# Malyan M200 v2 (STM32F070CB)
#
[env:STM32F070CB_malyan]
platform = ${common_stm32.platform}
extends = common_stm32
board = malyanm200_f070cb
build_flags = ${common_stm32.build_flags}
-DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE
#
# Malyan M300 (STM32F070CB)
#
[env:malyan_M300]
platform = ${common_stm32.platform}
extends = common_stm32
board = malyanm300_f070cb
build_flags = ${common_stm32.build_flags}
-DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED
src_filter = ${common.default_src_filter} +<src/HAL/STM32>
#
# Chitu boards like Tronxy X5s (STM32F103ZET6)
#
[env:chitu_f103]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = CHITU_F103
extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
buildroot/share/PlatformIO/scripts/chitu_crypt.py
build_flags = ${common_stm32f1.build_flags}
-DSTM32F1xx -DSTM32_XL_DENSITY
build_unflags = ${common_stm32f1.build_unflags}
-DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
#
# Some Chitu V5 boards have a problem with GPIO init.
# Use this target if G28 or G29 are always failing.
#
[env:chitu_v5_gpio_init]
platform = ${common_stm32f1.platform}
extends = env:chitu_f103
build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
#
# Creality (STM32F103RET6)
#
[env:STM32F103RET6_creality]
platform = ${env:STM32F103RE.platform}
extends = env:STM32F103RE
build_flags = ${env:STM32F103RE.build_flags} -DTEMP_TIMER_CHAN=4
extra_scripts = ${env:STM32F103RE.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/random-bin.py
buildroot/share/PlatformIO/scripts/creality.py
debug_tool = jlink
upload_protocol = jlink
#
# FLSUN QQ (STM32F103VET6)
#
[env:flsun_hispeed]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103VE
platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_mini.py
buildroot/share/PlatformIO/scripts/add_nanolib.py
build_flags = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4
lib_deps = SoftwareSerialM
#Adafruit NeoPixel=https://github.com/Foxies-CSTL/Robin-NeoPixel-Lib/archive/master.zip
#
# STM32F401VE
# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
#
[env:STM32F401VE_STEVAL]
platform = ${common_stm32.platform}
extends = common_stm32
board = STEVAL_STM32F401VE
build_flags = ${common_stm32.build_flags}
-DARDUINO_STEVAL -DSTM32F401xE
-DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py
#
# FLYF407ZG
#
[env:FLYF407ZG]
platform = ${common_stm32.platform}
extends = common_stm32
board = FLYF407ZG
build_flags = ${common_stm32.build_flags}
-DVECT_TAB_OFFSET=0x8000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# FLY MINI(stm32f103rct6)
#
[env:FLY_MINI]
platform = ${common_stm32f1.platform}
extends = common_stm32f1
board = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/fly_mini.py
build_flags = ${common_stm32f1.build_flags}
-DDEBUG_LEVEL=0 -DSS_TIMER=4
#
# FYSETC S6 (STM32F446VET6 ARM Cortex-M4)
#
[env:FYSETC_S6]
platform = ${common_stm32.platform}
extends = common_stm32
platform_packages = tool-stm32duino
board = marlin_fysetc_s6
build_flags = ${common_stm32.build_flags}
-DVECT_TAB_OFFSET=0x10000
-DHAL_PCD_MODULE_ENABLED
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
debug_tool = stlink
upload_protocol = dfu
upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
#
# STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware
#
[env:STM32F407VE_black]
platform = ${common_stm32.platform}
extends = common_stm32
board = blackSTM32F407VET6
build_flags = ${common_stm32.build_flags}
-DARDUINO_BLACK_F407VE
-DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
#
[env:BIGTREE_SKR_PRO]
platform = ${common_stm32.platform}
extends = common_stm32
board = BigTree_SKR_Pro
build_flags = ${common_stm32.build_flags}
-DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#upload_protocol = stlink
#upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
debug_tool = stlink
debug_init_break =
#
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
#
[env:BIGTREE_GTR_V1_0]
platform = ${common_stm32.platform}
extends = common_stm32
board = BigTree_GTR_v1
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags = ${common_stm32.build_flags}
-DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
#
# BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
#
[env:BIGTREE_BTT002]
platform = ${common_stm32.platform}
extends = common_stm32
board = BigTree_Btt002
build_flags = ${common_stm32.build_flags}
-DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
-DHAVE_HWSERIAL2
-DHAVE_HWSERIAL3
-DPIN_SERIAL2_RX=PD_6
-DPIN_SERIAL2_TX=PD_5
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#
# Lerdge base
#
[lerdge_common]
platform = ${common_stm32.platform}
extends = common_stm32
board = LERDGE
board_build.offset = 0x10000
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/lerdge.py
build_flags = ${common_stm32.build_flags}
-DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
-DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
-DTRANSFER_CLOCK_DIV=8 -DHAL_SRAM_MODULE_ENABLED
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
#
# Lerdge X
#
[env:LERDGEX]
extends = lerdge_common
board_build.firmware = Lerdge_X_firmware_force.bin
#
# Lerdge S
#
[env:LERDGES]
extends = lerdge_common
board_build.firmware = Lerdge_firmware_force.bin
#
# Lerdge K
#
[env:LERDGEK]
extends = lerdge_common
board_build.firmware = Lerdge_K_firmware_force.bin
build_flags = ${lerdge_common.build_flags}
-DLERDGEK
#
# RUMBA32
#
[env:rumba32]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags}
-Os
-DHAL_PCD_MODULE_ENABLED
-DDISABLE_GENERIC_SERIALUSB
-DHAL_UART_MODULE_ENABLED
-DTIMER_SERIAL=TIM9
board = rumba32_f446ve
upload_protocol = dfu
monitor_speed = 500000
#
# MKS Robin Nano V1.2 and V2 using hal STM32
#
[env:mks_robin_nano35_stm32]
platform = ${common_stm32.platform}
extends = common_stm32
build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
board = genericSTM32F103VE
board_build.core = stm32
board_build.variant = MARLIN_F103Vx
board_build.ldscript = ldscript.ld
board_build.offset = 0x7000
board_build.firmware = Robin_nano35.bin
board_upload.offset_address = 0x08007000
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
debug_tool = jlink
upload_protocol = jlink
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
buildroot/share/PlatformIO/scripts/stm32_bootloader.py
buildroot/share/PlatformIO/scripts/mks_encrypt.py
#################################
# #
# Other Architectures #
# #
#################################
#
# Espressif ESP32
#
[env:esp32]
platform = espressif32@1.11.2
board = esp32dev
build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0
src_filter = ${common.default_src_filter} +<src/HAL/ESP32>
lib_ignore = NativeEthernet
upload_speed = 115200
#upload_port = marlinesp.local
#board_build.flash_mode = qio
[env:FYSETC_E4]
platform = espressif32@1.11.2
extends = env:esp32
board_build.partitions = default_16MB.csv
#
# Teensy 3.1 / 3.2 (ARM Cortex-M4)
#
[env:teensy31]
platform = teensy
board = teensy31
src_filter = ${common.default_src_filter} +<src/HAL/TEENSY31_32>
lib_ignore = NativeEthernet
#
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
#
[env:teensy35]
platform = teensy
board = teensy35
src_filter = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
lib_ignore = NativeEthernet
[env:teensy36]
platform = teensy
board = teensy36
src_filter = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
lib_ignore = NativeEthernet
#
# Teensy 4.0 / 4.1 (ARM Cortex-M7)
#
[env:teensy41]
platform = teensy
board = teensy41
src_filter = ${common.default_src_filter} +<src/HAL/TEENSY40_41>
#
# Native
# No supported Arduino libraries, base Marlin only
#
[env:linux_native]
platform = native
framework =
build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include
build_unflags = -Wall
lib_ldf_mode = off
lib_deps =
src_filter = ${common.default_src_filter} +<src/HAL/LINUX>
#
# Just print the dependency tree
#
[env:include_tree]
platform = atmelavr
board = megaatmega2560
build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
src_filter = +<src/MarlinCore.cpp>