Bob Kuhn
4 years ago
committed by
Scott Lahteine
Scott Lahteine
13 changed files with 1803 additions and 192 deletions
@ -1,150 +0,0 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
#ifndef STM32F4 |
|||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" |
|||
#endif |
|||
|
|||
#ifndef MACHINE_NAME |
|||
#define MACHINE_NAME "STEVAL-3DP001V1" |
|||
#endif |
|||
|
|||
#undef TEMP_TIMER |
|||
#define TEMP_TIMER 9 // the Marlin default of timer 7 doesn't exist on the STM32MF401 series
|
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN 38 // PD8 X_STOP
|
|||
#define X_MAX_PIN -1 |
|||
#define Y_MIN_PIN 39 // PD9 Y_STOP
|
|||
#define Y_MAX_PIN -1 |
|||
#define Z_MIN_PIN 40 // PD10 Z_STOP
|
|||
#define Z_MAX_PIN -1 |
|||
|
|||
//
|
|||
// Z Probe (when not Z_MIN_PIN)
|
|||
//
|
|||
// #ifndef Z_MIN_PROBE_PIN
|
|||
// #define Z_MIN_PROBE_PIN 11 // PA4
|
|||
// #endif
|
|||
|
|||
#define SCK_PIN 16 // PB13 SPI_S
|
|||
#define MISO_PIN 17 // PB14 SPI_M
|
|||
#define MOSI_PIN 18 // PB15 SPI_M
|
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
|
|||
#define X_STEP_PIN 60 // PE14 X_PWM
|
|||
#define X_DIR_PIN 61 // PE15 X_DIR
|
|||
#define X_ENABLE_PIN 59 // PE13 X_RES
|
|||
#define X_CS_PIN 11 // PA4 SPI_CS
|
|||
|
|||
#define Y_STEP_PIN 62 // PB10 Y_PWM
|
|||
#define Y_DIR_PIN 63 // PE9 Y_DIR
|
|||
#define Y_ENABLE_PIN 64 // PE10 Y_RES
|
|||
#define Y_CS_PIN 11 // PA4 SPI_CS
|
|||
|
|||
#define Z_STEP_PIN 66 // PC6 Z_PWM
|
|||
#define Z_DIR_PIN 67 // PC0 Z_DIR
|
|||
#define Z_ENABLE_PIN 65 // PC15 Z_RES
|
|||
#define Z_CS_PIN 11 // PA4 SPI_CS
|
|||
|
|||
#define E0_STEP_PIN 70 // PD12 E1_PW
|
|||
#define E0_DIR_PIN 68 // PC13 E1_DIR
|
|||
#define E0_ENABLE_PIN 69 // PC14 E1_RE
|
|||
#define E0_CS_PIN 11 // PA4 SPI_CS
|
|||
|
|||
#define E1_STEP_PIN 72 // PE5 E2_PWM
|
|||
#define E1_DIR_PIN 73 // PE6 E2_DIR
|
|||
#define E1_ENABLE_PIN 71 // PE4 E2_RESE
|
|||
#define E1_CS_PIN 11 // PA4 SPI_CS
|
|||
|
|||
#define E2_STEP_PIN 76 // PB8 E3_PWM
|
|||
#define E2_DIR_PIN 74 // PE2 E3_DIR
|
|||
#define E2_ENABLE_PIN 75 // PE3 E3_RESE
|
|||
#define E2_CS_PIN 11 // PA4 SPI_CS
|
|||
|
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN 52 // PA0 E1_THER
|
|||
#define TEMP_1_PIN 53 // PA1 E2_THER
|
|||
#define TEMP_BED_PIN 50 // PC2 BED_THE
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN 52 // PA0 E1_THER
|
|||
#define HEATER_1_PIN 53 // PA1 E2_THER
|
|||
#define HEATER_BED_PIN 50 // PC2 BED_THE
|
|||
|
|||
#define FAN_PIN 56 // PC4 E1_FAN PWM pin, Part cooling fan
|
|||
#define FAN1_PIN 57 // PC5 E2_FAN PWM pin, Extruder fan
|
|||
#define FAN2_PIN 58 // PE8 E3_FAN PWM pin, Controller fan
|
|||
|
|||
//
|
|||
// Misc functions
|
|||
//
|
|||
#define SDSS 11 // PA4 SPI_CS
|
|||
#define LED_PIN -1 // Heart beat
|
|||
#define PS_ON_PIN -1 |
|||
#define KILL_PIN -1 |
|||
#define PWR_LOSS -1 // Power loss / nAC_FAULT
|
|||
|
|||
//
|
|||
// LCD / Controller
|
|||
//
|
|||
//#define SD_DETECT_PIN 24 // PA15 SD_CA
|
|||
//#define BEEPER_PIN 23 // PC9 SDIO_D1
|
|||
//#define LCD_PINS_RS 63 // PE9 Y_DIR
|
|||
//#define LCD_PINS_ENABLE 58 // PE8 E3_FAN
|
|||
//#define LCD_PINS_D4 15 // PB12 SPI_C
|
|||
//#define LCD_PINS_D5 16 // PB13 SPI_S
|
|||
//#define LCD_PINS_D6 17 // PB14 SPI_M
|
|||
//#define LCD_PINS_D7 18 // PB15 SPI_M
|
|||
//#define BTN_EN1 56 // PC4 E1_FAN
|
|||
//#define BTN_EN2 57 // PC5 E2_FAN
|
|||
//#define BTN_ENC 51 // PC3 BED_THE
|
|||
|
|||
//
|
|||
// Filament runout detection
|
|||
//
|
|||
//#define FIL_RUNOUT_PIN 55 // PA3 BED_THE
|
|||
|
|||
//
|
|||
// Extension pins
|
|||
//
|
|||
//#define EXT0_PIN 48 // PB0 E2_HEAT
|
|||
//#define EXT1_PIN 49 // PB1 E3_HEAT
|
|||
//#define EXT2_PIN // PB2
|
|||
//#define EXT3_PIN 38 // PD8 X_STOP
|
|||
//#define EXT4_PIN 39 // PD9 Y_STOP
|
|||
//#define EXT5_PIN 40 // PD10 Z_STOP
|
|||
//#define EXT6_PIN 41 // PD11
|
|||
//#define EXT7_PIN 70 // PD12 E1_PW
|
|||
//#define EXT8_PIN 62 // PB10 Y_PWM
|
|||
//#define EXT9_PIN // PB11
|
|||
@ -0,0 +1,349 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
// This pin map came from https://github.com/stm32duino/Arduino_Core_STM32/blob/master/variants/ST3DP001_EVAL/variant.cpp
|
|||
|
|||
/**
|
|||
* HOW TO COMPILE |
|||
* |
|||
* PlatformIO - use the environment STM32F401VE_STEVAL. The AUTO BUILD script will automatically use that environment. |
|||
* |
|||
* Arduino - this has been tested under 1.8.10 |
|||
* Install library per https://github.com/stm32duino/Arduino_Core_STM32
|
|||
* Make the following selections under the TOOL menu in the Arduino IDE |
|||
* Board: "3D printer boards" |
|||
* Board part number: "STEVAL-3DP001V1" |
|||
* U(S)ART support: "Enabled (generic "Serial")" |
|||
* USB support (if available): "CDC (no generic "Serial")" |
|||
* Optimize: "Smallest (-Os default)" |
|||
* C Runtime Library: "newlib Nano (default)" |
|||
*/ |
|||
|
|||
#pragma once |
|||
|
|||
#ifndef STM32F4 |
|||
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" |
|||
#endif |
|||
|
|||
#ifndef MACHINE_NAME |
|||
#define MACHINE_NAME "STEVAL-3DP001V1" |
|||
#endif |
|||
|
|||
#undef TEMP_TIMER |
|||
#define TEMP_TIMER 9 // the Marlin default of timer 7 doesn't exist on the STM32MF401 series
|
|||
|
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN 39 // PD8 X_STOP
|
|||
//#define X_MAX_PIN 44 // PD0 W_STOP
|
|||
#define Y_MIN_PIN 40 // PD9 Y_STOP
|
|||
//#define Y_MAX_PIN 43 // PA8 V_STOP
|
|||
#define Z_MIN_PIN 41 // PD10 Z_STOP
|
|||
//#define Z_MAX_PIN 42 // PD11 U_STOP
|
|||
|
|||
//
|
|||
// Z Probe (when not Z_MIN_PIN)
|
|||
//
|
|||
// #ifndef Z_MIN_PROBE_PIN
|
|||
// #define Z_MIN_PROBE_PIN 16 // PA4
|
|||
// #endif
|
|||
|
|||
#define SCK_PIN 13 // PB13 SPI_S
|
|||
#define MISO_PIN 12 // PB14 SPI_M
|
|||
#define MOSI_PIN 11 // PB15 SPI_M
|
|||
|
|||
|
|||
#define L6470_CHAIN_SCK_PIN 17 // PA5
|
|||
#define L6470_CHAIN_MISO_PIN 18 // PA6
|
|||
#define L6470_CHAIN_MOSI_PIN 19 // PA7
|
|||
#define L6470_CHAIN_SS_PIN 16 // PA4
|
|||
|
|||
//#define SCK_PIN L6470_CHAIN_SCK_PIN
|
|||
//#define MISO_PIN L6470_CHAIN_MISO_PIN
|
|||
//#define MOSI_PIN L6470_CHAIN_MOSI_PIN
|
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
|
|||
#define X_STEP_PIN 61 // PE14 X_PWM
|
|||
#define X_DIR_PIN 62 // PE15 X_DIR
|
|||
#define X_ENABLE_PIN 60 // PE13 X_RES
|
|||
#define X_CS_PIN 16 // PA4 SPI_CS
|
|||
|
|||
#define Y_STEP_PIN 64 // PB10 Y_PWM
|
|||
#define Y_DIR_PIN 65 // PE9 Y_DIR
|
|||
#define Y_ENABLE_PIN 63 // PE10 Y_RES
|
|||
#define Y_CS_PIN 16 // PA4 SPI_CS
|
|||
|
|||
#define Z_STEP_PIN 67 // PC6 Z_PWM
|
|||
#define Z_DIR_PIN 68 // PC0 Z_DIR
|
|||
#define Z_ENABLE_PIN 66 // PC15 Z_RES
|
|||
#define Z_CS_PIN 16 // PA4 SPI_CS
|
|||
|
|||
#define E0_STEP_PIN 71 // PD12 E1_PW
|
|||
#define E0_DIR_PIN 70 // PC13 E1_DIR
|
|||
#define E0_ENABLE_PIN 69 // PC14 E1_RE
|
|||
#define E0_CS_PIN 16 // PA4 SPI_CS
|
|||
|
|||
#define E1_STEP_PIN 73 // PE5 E2_PWM
|
|||
#define E1_DIR_PIN 74 // PE6 E2_DIR
|
|||
#define E1_ENABLE_PIN 72 // PE4 E2_RESE
|
|||
#define E1_CS_PIN 16 // PA4 SPI_CS
|
|||
|
|||
#define E2_STEP_PIN 77 // PB8 E3_PWM
|
|||
#define E2_DIR_PIN 76 // PE2 E3_DIR
|
|||
#define E2_ENABLE_PIN 75 // PE3 E3_RESE
|
|||
#define E2_CS_PIN 16 // PA4 SPI_CS
|
|||
|
|||
// needed to pass a sanity check
|
|||
#define X2_CS_PIN 16 // PA4 SPI_CS
|
|||
#define Y2_CS_PIN 16 // PA4 SPI_CS
|
|||
#define Z2_CS_PIN 16 // PA4 SPI_CS
|
|||
#define Z3_CS_PIN 16 // PA4 SPI_CS
|
|||
#define E3_CS_PIN 16 // PA4 SPI_CS
|
|||
#define E4_CS_PIN 16 // PA4 SPI_CS
|
|||
#define E5_CS_PIN 16 // PA4 SPI_CS
|
|||
|
|||
/**
|
|||
* macro to reset/enable L6474 chips |
|||
* |
|||
* IMPORTANT - to disable (bypass) a L6474, install the corresponding |
|||
* resistor (R11 - R17) and change the "V" to zero for the |
|||
* corresponding pin. |
|||
*/ |
|||
#define ENABLE_RESET_L64XX_CHIPS(V) do{OUT_WRITE(X_ENABLE_PIN, V);\ |
|||
OUT_WRITE(Y_ENABLE_PIN, V);\ |
|||
OUT_WRITE(Z_ENABLE_PIN, V);\ |
|||
OUT_WRITE(E0_ENABLE_PIN,V);\ |
|||
OUT_WRITE(E1_ENABLE_PIN,V);\ |
|||
OUT_WRITE(E2_ENABLE_PIN,V);\ |
|||
}while(0) |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN 54 // PA0 E1_THERMISTOR
|
|||
#define TEMP_1_PIN 55 // PA1 E2_THERMISTOR
|
|||
#define TEMP_2_PIN 56 // PA2 E3_THERMISTOR
|
|||
#define TEMP_BED_PIN 51 // PC2 BED_THERMISTOR_1
|
|||
#define TEMP_BED_1_PIN 52 // PC3 BED_THERMISTOR_2
|
|||
#define TEMP_BED_2_PIN 53 // PA3 BED_THERMISTOR_3
|
|||
|
|||
|
|||
|
|||
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN 48 // PC7 E1_HEAT_PWM
|
|||
#define HEATER_1_PIN 49 // PB0 E2_HEAT_PWM
|
|||
#define HEATER_2_PIN 50 // PB1 E3_HEAT_PWM
|
|||
#define HEATER_BED_PIN 46 // PD14 BED_HEAT_1 FET
|
|||
#define HEATER_BED_1_PIN 45 // PD13 BED_HEAT_2 FET
|
|||
#define HEATER_BED_2_PIN 47 // PD15 BED_HEAT_3 FET
|
|||
|
|||
#define FAN_PIN 57 // PC4 E1_FAN PWM pin, Part cooling fan FET
|
|||
#define FAN1_PIN 58 // PC5 E2_FAN PWM pin, Extruder fan FET
|
|||
#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN |
|||
#define FAN2_PIN 59 // PE8 E3_FAN PWM pin, Controller fan FET
|
|||
|
|||
//
|
|||
// Misc functions
|
|||
//
|
|||
#define SDSS 16 // PA4 SPI_CS
|
|||
#define LED_PIN -1 // 9 // PE1 green LED Heart beat
|
|||
#define PS_ON_PIN -1 |
|||
#define KILL_PIN -1 |
|||
#define PWR_LOSS -1 // Power loss / nAC_FAULT
|
|||
|
|||
//
|
|||
// LCD / Controller
|
|||
//
|
|||
//#define SD_DETECT_PIN 66 // PA15 SD_CA
|
|||
//#define BEEPER_PIN 24 // PC9 SDIO_D1
|
|||
//#define LCD_PINS_RS 65 // PE9 Y_DIR
|
|||
//#define LCD_PINS_ENABLE 59 // PE8 E3_FAN
|
|||
//#define LCD_PINS_D4 10 // PB12 SPI_C
|
|||
//#define LCD_PINS_D5 13 // PB13 SPI_S
|
|||
//#define LCD_PINS_D6 12 // PB14 SPI_M
|
|||
//#define LCD_PINS_D7 11 // PB15 SPI_M
|
|||
//#define BTN_EN1 57 // PC4 E1_FAN
|
|||
//#define BTN_EN2 58 // PC5 E2_FAN
|
|||
//#define BTN_ENC 52 // PC3 BED_THE
|
|||
|
|||
//
|
|||
// Filament runout detection
|
|||
//
|
|||
//#define FIL_RUNOUT_PIN 53 // PA3 BED_THE
|
|||
|
|||
//
|
|||
// Extension pins
|
|||
//
|
|||
//#define EXT0_PIN 49 // PB0 E2_HEAT
|
|||
//#define EXT1_PIN 50 // PB1 E3_HEAT
|
|||
//#define EXT2_PIN // PB2 not used (tied to ground)
|
|||
//#define EXT3_PIN 39 // PD8 X_STOP
|
|||
//#define EXT4_PIN 40 // PD9 Y_STOP
|
|||
//#define EXT5_PIN 41 // PD10 Z_STOP
|
|||
//#define EXT6_PIN 42 // PD11
|
|||
//#define EXT7_PIN 71 // PD12 E1_PW
|
|||
//#define EXT8_PIN 64 // PB10 Y_PWM
|
|||
|
|||
|
|||
|
|||
// WIFI
|
|||
// #define 2 // PD3 //CTS
|
|||
// #define 3 // PD4 //RTS
|
|||
// #define 4 // PD5 //TX
|
|||
// #define 5 // PD6 //RX
|
|||
// #define 6 // PB5 //WIFI_WAKEUP
|
|||
// #define 7 // PE11 //WIFI_RESET
|
|||
// #define 8 // PE12 //WIFI_BOOT
|
|||
|
|||
|
|||
// I2C USER
|
|||
// #define 14 // PB7 //SDA
|
|||
// #define 15 // PB6 //SCL
|
|||
|
|||
// JTAG
|
|||
// 20 // PA13 //JTAG_TMS/SWDIO
|
|||
// 21 // PA14 //JTAG_TCK/SWCLK
|
|||
// 22 // PB3 //JTAG_TDO/SWO
|
|||
|
|||
// SDCARD
|
|||
// #define 23 // PC8 //SDIO_D0
|
|||
// #define 24 // PC9 //SDIO_D1
|
|||
// #define 25 // PA15 //SD_CARD_DETECT
|
|||
// #define 26 // PC10 //SDIO_D2
|
|||
// #define 27 // PC11 //SDIO_D3
|
|||
// #define 28 // PC12 //SDIO_CK
|
|||
// #define 29 // PD2 //SDIO_CMD
|
|||
|
|||
// OTG
|
|||
// #define 30 // PA11 //OTG_DM
|
|||
// #define 31 // PA12 //OTG_DP
|
|||
|
|||
// USER_PINS
|
|||
// #define 34 // PD7 //USER3
|
|||
// #define 35 // PB9 //USER1
|
|||
#define temp_bob_pin 36 // PE0 //USER2
|
|||
// #define 37 // PB4 //USER4
|
|||
|
|||
// USERKET
|
|||
// #define 38 // PE7 //USER_BUTTON
|
|||
|
|||
|
|||
// #define 0 // PA9 //TX
|
|||
// #define 1 // PA10 //RX
|
|||
|
|||
|
|||
// IR/PROBE
|
|||
// #define 32 // PD1 //IR_OUT
|
|||
// #define 33 // PC1 //IR_ON
|
|||
|
|||
|
|||
/**
|
|||
* logical pin vs. port/pin cross reference |
|||
* |
|||
* PA0 54 // E1_THERMISTOR PA9 0 //TX
|
|||
* PA1 55 // E2_THERMISTOR PA10 1 //RX
|
|||
* PA2 56 // E3_THERMISTOR PD3 2 // CTS
|
|||
* PA3 53 // BED_THERMISTOR_3 PD4 3 // RTS
|
|||
* PA4 16 // SPI_CS PD5 4 // TX
|
|||
* PA5 17 // SPI_SCK PD6 5 // RX
|
|||
* PA6 18 // SPI_MISO PB5 6 // WIFI_WAKEUP
|
|||
* PA7 19 // SPI_MOSI PE11 7 // WIFI_RESET
|
|||
* PA8 43 // V_STOP PE12 8 // WIFI_BOOT
|
|||
* PA9 0 //TX PE1 9 // STATUS_LED
|
|||
* PA10 1 //RX PB12 10 // SPI_CS
|
|||
* PA11 30 //OTG_DM PB15 11 // SPI_MOSI
|
|||
* PA12 31 //OTG_DP PB14 12 // SPI_MISO
|
|||
* PA13 20 // JTAG_TMS/SWDIO PB13 13 // SPI_SCK
|
|||
* PA14 21 // JTAG_TCK/SWCLK PB7 14 // SDA
|
|||
* PA15 25 // SD_CARD_DETECT PB6 15 // SCL
|
|||
* PB0 49 // E2_HEAT_PWM PA4 16 // SPI_CS
|
|||
* PB1 50 // E3_HEAT_PWM PA5 17 // SPI_SCK
|
|||
* PB3 22 // JTAG_TDO/SWO PA6 18 // SPI_MISO
|
|||
* PB4 37 // USER4 PA7 19 // SPI_MOSI
|
|||
* PB5 6 // WIFI_WAKEUP PA13 20 // JTAG_TMS/SWDIO
|
|||
* PB6 15 // SCL PA14 21 // JTAG_TCK/SWCLK
|
|||
* PB7 14 // SDA PB3 22 // JTAG_TDO/SWO
|
|||
* PB8 77 // E3_PWM PC8 23 // SDIO_D0
|
|||
* PB9 35 // USER1 PC9 24 // SDIO_D1
|
|||
* PB10 64 // Y_PWM PA15 25 // SD_CARD_DETECT
|
|||
* PB12 10 // SPI_CS PC10 26 // SDIO_D2
|
|||
* PB13 13 // SPI_SCK PC11 27 // SDIO_D3
|
|||
* PB14 12 // SPI_MISO PC12 28 // SDIO_CK
|
|||
* PB15 11 // SPI_MOSI PD2 29 // SDIO_CMD
|
|||
* PC0 68 // Z_DIR PA11 30 //OTG_DM
|
|||
* PC1 33 //IR_ON PA12 31 //OTG_DP
|
|||
* PC2 51 // BED_THERMISTOR_1 PD1 32 //IR_OUT
|
|||
* PC3 52 // BED_THERMISTOR_2 PC1 33 //IR_ON
|
|||
* PC4 57 // E1_FAN PD7 34 // USER3
|
|||
* PC5 58 // E2_FAN PB9 35 // USER1
|
|||
* PC6 67 // Z_PWM PE0 36 // USER2
|
|||
* PC7 48 // E1_HEAT_PWM PB4 37 // USER4
|
|||
* PC8 23 // SDIO_D0 PE7 38 // USER_BUTTON
|
|||
* PC9 24 // SDIO_D1 PD8 39 // X_STOP
|
|||
* PC10 26 // SDIO_D2 PD9 40 // Y_STOP
|
|||
* PC11 27 // SDIO_D3 PD10 41 // Z_STOP
|
|||
* PC12 28 // SDIO_CK PD11 42 // U_STOP
|
|||
* PC13 70 // E1_DIR PA8 43 // V_STOP
|
|||
* PC14 69 // E1_RESET PD0 44 // W_STOP
|
|||
* PC15 66 // Z_RESET PD13 45 // BED_HEAT_2
|
|||
* PD0 44 // W_STOP PD14 46 // BED_HEAT_1
|
|||
* PD1 32 //IR_OUT PD15 47 // BED_HEAT_3
|
|||
* PD2 29 // SDIO_CMD PC7 48 // E1_HEAT_PWM
|
|||
* PD3 2 // CTS PB0 49 // E2_HEAT_PWM
|
|||
* PD4 3 // RTS PB1 50 // E3_HEAT_PWM
|
|||
* PD5 4 // TX PC2 51 // BED_THERMISTOR_1
|
|||
* PD6 5 // RX PC3 52 // BED_THERMISTOR_2
|
|||
* PD7 34 // USER3 PA3 53 // BED_THERMISTOR_3
|
|||
* PD8 39 // X_STOP PA0 54 // E1_THERMISTOR
|
|||
* PD9 40 // Y_STOP PA1 55 // E2_THERMISTOR
|
|||
* PD10 41 // Z_STOP PA2 56 // E3_THERMISTOR
|
|||
* PD11 42 // U_STOP PC4 57 // E1_FAN
|
|||
* PD12 71 // E1_PWM PC5 58 // E2_FAN
|
|||
* PD13 45 // BED_HEAT_2 PE8 59 // E3_FAN
|
|||
* PD14 46 // BED_HEAT_1 PE13 60 // X_RESET
|
|||
* PD15 47 // BED_HEAT_3 PE14 61 // X_PWM
|
|||
* PE0 36 // USER2 PE15 62 // X_DIR
|
|||
* PE1 9 // STATUS_LED PE10 63 // Y_RESET
|
|||
* PE2 76 // E3_DIR PB10 64 // Y_PWM
|
|||
* PE3 75 // E3_RESET PE9 65 // Y_DIR
|
|||
* PE4 72 // E2_RESET PC15 66 // Z_RESET
|
|||
* PE5 73 // E2_PWM PC6 67 // Z_PWM
|
|||
* PE6 74 // E2_DIR PC0 68 // Z_DIR
|
|||
* PE7 38 // USER_BUTTON PC14 69 // E1_RESET
|
|||
* PE8 59 // E3_FAN PC13 70 // E1_DIR
|
|||
* PE9 65 // Y_DIR PD12 71 // E1_PWM
|
|||
* PE10 63 // Y_RESET PE4 72 // E2_RESET
|
|||
* PE11 7 // WIFI_RESET PE5 73 // E2_PWM
|
|||
* PE12 8 // WIFI_BOOT PE6 74 // E2_DIR
|
|||
* PE13 60 // X_RESET PE3 75 // E3_RESET
|
|||
* PE14 61 // X_PWM PE2 76 // E3_DIR
|
|||
* PE15 62 // X_DIR PB8 77 // E3_PWM
|
|||
*/ |
|||
@ -0,0 +1,65 @@ |
|||
{ |
|||
"build": { |
|||
"core": "stm32", |
|||
"cpu": "cortex-m4", |
|||
"extra_flags": "-DSTM32F401xx", |
|||
"f_cpu": "84000000L", |
|||
"hwids": [ |
|||
[ |
|||
"0x1EAF", |
|||
"0x0003" |
|||
], |
|||
[ |
|||
"0x0483", |
|||
"0x3748" |
|||
] |
|||
], |
|||
"ldscript": "stm32f401xe.ld", |
|||
"mcu": "stm32f401vet6", |
|||
"variant": "STEVAL_F401VE" |
|||
}, |
|||
"debug": { |
|||
"jlink_device": "STM32F401VE", |
|||
"openocd_target": "stm32f4x", |
|||
"svd_path": "STM32F40x.svd", |
|||
"tools": { |
|||
"stlink": { |
|||
"server": { |
|||
"arguments": [ |
|||
"-f", |
|||
"scripts/interface/stlink.cfg", |
|||
"-c", |
|||
"transport select hla_swd", |
|||
"-f", |
|||
"scripts/target/stm32f4x.cfg", |
|||
"-c", |
|||
"reset_config none" |
|||
], |
|||
"executable": "bin/openocd", |
|||
"package": "tool-openocd" |
|||
} |
|||
} |
|||
} |
|||
}, |
|||
"frameworks": [ |
|||
"arduino", |
|||
"stm32cube" |
|||
], |
|||
"name": "STM32F401VE (96k RAM. 512k Flash)", |
|||
"upload": { |
|||
"disable_flushing": false, |
|||
"maximum_ram_size": 98304, |
|||
"maximum_size": 514288, |
|||
"protocol": "stlink", |
|||
"protocols": [ |
|||
"stlink", |
|||
"dfu", |
|||
"jlink" |
|||
], |
|||
"require_upload_port": true, |
|||
"use_1200bps_touch": false, |
|||
"wait_for_upload_port": false |
|||
}, |
|||
"url": "https://www.st.com/en/evaluation-tools/steval-3dp001v1.html", |
|||
"vendor": "Generic" |
|||
} |
|||
@ -0,0 +1,11 @@ |
|||
import os |
|||
Import("env") |
|||
|
|||
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/variants/STEVAL_F401VE/ldscript.ld") |
|||
for i, flag in enumerate(env["LINKFLAGS"]): |
|||
if "-Wl,-T" in flag: |
|||
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script |
|||
elif flag == "-T": |
|||
env["LINKFLAGS"][i + 1] = custom_ld_script |
|||
|
|||
|
|||
@ -0,0 +1,274 @@ |
|||
|
|||
/*
|
|||
******************************************************************************* |
|||
* Copyright (c) 2019, STMicroelectronics |
|||
* All rights reserved. |
|||
* |
|||
* This software component is licensed by ST under BSD 3-Clause license, |
|||
* the "License"; You may not use this file except in compliance with the |
|||
* License. You may obtain a copy of the License at: |
|||
* opensource.org/licenses/BSD-3-Clause |
|||
* |
|||
******************************************************************************* |
|||
* Automatically generated from STM32F401V(D-E)Tx.xml |
|||
*/ |
|||
#include "Arduino.h" |
|||
#include "PeripheralPins.h" |
|||
|
|||
/* =====
|
|||
* Note: Commented lines are alternative possibilities which are not used per default. |
|||
* If you change them, you will have to know what you do |
|||
* ===== |
|||
*/ |
|||
|
|||
//*** ADC ***
|
|||
|
|||
#ifdef HAL_ADC_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_ADC[] = { |
|||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
|||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
|||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
|||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
|||
// {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
|||
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
|||
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
|||
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
|||
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
|||
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
|||
// {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
|||
// {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
|||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
|||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
|||
// {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
|||
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** No DAC ***
|
|||
|
|||
//*** I2C ***
|
|||
|
|||
#ifdef HAL_I2C_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_I2C_SDA[] = { |
|||
// {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
|
|||
// {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
|||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
|||
// {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
|||
// {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
#ifdef HAL_I2C_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_I2C_SCL[] = { |
|||
// {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
|||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
|||
// {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
|||
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** PWM ***
|
|||
|
|||
#ifdef HAL_TIM_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_PWM[] = { |
|||
// {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
|||
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
|||
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
|||
// {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
|||
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
|||
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
|||
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
|||
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
|||
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
|||
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
|||
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
|||
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
|||
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
|||
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
|||
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
|||
// {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
|||
// {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
|||
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
|||
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
|||
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
|||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
|||
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
|||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
|||
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
|||
// {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
|||
// {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
|||
// {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
|||
// {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
|||
// {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
|||
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
|||
// {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
|||
// {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
|||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
|||
// {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
|||
// {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
|||
// {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
|||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
|||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
|||
// {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
|||
// {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
|||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
|||
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
|||
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
|||
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
|||
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
|||
// {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
|||
// {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
|||
// {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
|||
// {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
|||
// {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
|||
// {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
|||
// {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
|||
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** SERIAL ***
|
|||
|
|||
#ifdef HAL_UART_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_UART_TX[] = { |
|||
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
|||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
// {PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
|||
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
|||
// {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
|||
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
#ifdef HAL_UART_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_UART_RX[] = { |
|||
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
|||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
// {PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
|||
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
|||
// {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
|||
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
#ifdef HAL_UART_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_UART_RTS[] = { |
|||
// {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
|||
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
|||
{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
#ifdef HAL_UART_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_UART_CTS[] = { |
|||
// {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
|||
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
|||
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** SPI ***
|
|||
|
|||
#ifdef HAL_SPI_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_SPI_MOSI[] = { |
|||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
// {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
// {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
|||
// {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
// {PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
// {PE_6, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
// {PE_14, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
#ifdef HAL_SPI_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_SPI_MISO[] = { |
|||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
// {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
// {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
|||
// {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
// {PE_5, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
// {PE_13, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
#ifdef HAL_SPI_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_SPI_SCLK[] = { |
|||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
// {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
// {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
|||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
// {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
// {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
|||
// {PE_2, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
// {PE_12, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
#ifdef HAL_SPI_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_SPI_SSEL[] = { |
|||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
// {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
// {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
|||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
// {PE_4, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
// {PE_11, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** No CAN ***
|
|||
|
|||
//*** No ETHERNET ***
|
|||
|
|||
//*** No QUADSPI ***
|
|||
|
|||
//*** USB ***
|
|||
|
|||
#ifdef HAL_PCD_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_USB_OTG_FS[] = { |
|||
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
|||
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
|||
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
|||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
|||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** No USB_OTG_HS ***
|
|||
//*** SD ***
|
|||
|
|||
#ifdef HAL_SD_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_SD[] = { |
|||
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
|||
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
|||
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
|||
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
|||
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
|||
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
|||
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
|||
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
|||
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
|||
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
@ -0,0 +1,33 @@ |
|||
/* SYS_WKUP */ |
|||
#ifdef PWR_WAKEUP_PIN1 |
|||
SYS_WKUP1 = PA_0, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN2 |
|||
SYS_WKUP2 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN3 |
|||
SYS_WKUP3 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN4 |
|||
SYS_WKUP4 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN5 |
|||
SYS_WKUP5 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN6 |
|||
SYS_WKUP6 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN7 |
|||
SYS_WKUP7 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN8 |
|||
SYS_WKUP8 = NC, |
|||
#endif |
|||
/* USB */ |
|||
#ifdef USBCON |
|||
USB_OTG_FS_SOF = PA_8, |
|||
USB_OTG_FS_VBUS = PA_9, |
|||
USB_OTG_FS_ID = PA_10, |
|||
USB_OTG_FS_DM = PA_11, |
|||
USB_OTG_FS_DP = PA_12, |
|||
#endif |
|||
@ -0,0 +1,496 @@ |
|||
/**
|
|||
****************************************************************************** |
|||
* @file stm32f4xx_hal_conf.h |
|||
* @brief HAL configuration file. |
|||
****************************************************************************** |
|||
* @attention |
|||
* |
|||
* <h2><center>© Copyright (c) 2017 STMicroelectronics. |
|||
* All rights reserved.</center></h2> |
|||
* |
|||
* This software component is licensed by ST under BSD 3-Clause license, |
|||
* the "License"; You may not use this file except in compliance with the |
|||
* License. You may obtain a copy of the License at: |
|||
* opensource.org/licenses/BSD-3-Clause |
|||
* |
|||
****************************************************************************** |
|||
*/ |
|||
|
|||
/* Define to prevent recursive inclusion -------------------------------------*/ |
|||
#ifndef __STM32F4xx_HAL_CONF_CUSTOM |
|||
#define __STM32F4xx_HAL_CONF_CUSTOM |
|||
|
|||
#ifdef __cplusplus |
|||
extern "C" { |
|||
#endif |
|||
|
|||
/* Exported types ------------------------------------------------------------*/ |
|||
/* Exported constants --------------------------------------------------------*/ |
|||
|
|||
/* ########################## Module Selection ############################## */ |
|||
/**
|
|||
* @brief This is the list of modules to be used in the HAL driver |
|||
*/ |
|||
#define HAL_MODULE_ENABLED |
|||
#define HAL_ADC_MODULE_ENABLED |
|||
/* #define HAL_CAN_MODULE_ENABLED */ |
|||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ |
|||
#define HAL_CRC_MODULE_ENABLED |
|||
/* #define HAL_CEC_MODULE_ENABLED */ |
|||
/* #define HAL_CRYP_MODULE_ENABLED */ |
|||
//#define HAL_DAC_MODULE_ENABLED
|
|||
/* #define HAL_DCMI_MODULE_ENABLED */ |
|||
#define HAL_DMA_MODULE_ENABLED |
|||
/* #define HAL_DMA2D_MODULE_ENABLED */ |
|||
/* #define HAL_ETH_MODULE_ENABLED */ |
|||
#define HAL_FLASH_MODULE_ENABLED |
|||
/* #define HAL_NAND_MODULE_ENABLED */ |
|||
/* #define HAL_NOR_MODULE_ENABLED */ |
|||
/* #define HAL_PCCARD_MODULE_ENABLED */ |
|||
/* #define HAL_SRAM_MODULE_ENABLED */ |
|||
/* #define HAL_SDRAM_MODULE_ENABLED */ |
|||
/* #define HAL_HASH_MODULE_ENABLED */ |
|||
#define HAL_GPIO_MODULE_ENABLED |
|||
/* #define HAL_EXTI_MODULE_ENABLED */ |
|||
#define HAL_I2C_MODULE_ENABLED |
|||
/* #define HAL_SMBUS_MODULE_ENABLED */ |
|||
/* #define HAL_I2S_MODULE_ENABLED */ |
|||
/* #define HAL_IWDG_MODULE_ENABLED */ |
|||
/* #define HAL_LTDC_MODULE_ENABLED */ |
|||
/* #define HAL_DSI_MODULE_ENABLED */ |
|||
#define HAL_PWR_MODULE_ENABLED |
|||
/* #define HAL_QSPI_MODULE_ENABLED */ |
|||
#define HAL_RCC_MODULE_ENABLED |
|||
/* #define HAL_RNG_MODULE_ENABLED */ |
|||
#define HAL_RTC_MODULE_ENABLED |
|||
/* #define HAL_SAI_MODULE_ENABLED */ |
|||
#define HAL_SD_MODULE_ENABLED |
|||
#define HAL_SPI_MODULE_ENABLED |
|||
#define HAL_TIM_MODULE_ENABLED |
|||
/* #define HAL_UART_MODULE_ENABLED */ |
|||
/* #define HAL_USART_MODULE_ENABLED */ |
|||
/* #define HAL_IRDA_MODULE_ENABLED */ |
|||
/* #define HAL_SMARTCARD_MODULE_ENABLED */ |
|||
/* #define HAL_WWDG_MODULE_ENABLED */ |
|||
#define HAL_CORTEX_MODULE_ENABLED |
|||
#ifndef HAL_PCD_MODULE_ENABLED |
|||
#define HAL_PCD_MODULE_ENABLED //Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
|
|||
#endif |
|||
/* #define HAL_HCD_MODULE_ENABLED */ |
|||
/* #define HAL_FMPI2C_MODULE_ENABLED */ |
|||
/* #define HAL_SPDIFRX_MODULE_ENABLED */ |
|||
/* #define HAL_DFSDM_MODULE_ENABLED */ |
|||
/* #define HAL_LPTIM_MODULE_ENABLED */ |
|||
/* #define HAL_MMC_MODULE_ENABLED */ |
|||
|
|||
/* ########################## HSE/HSI Values adaptation ##################### */ |
|||
/**
|
|||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application. |
|||
* This value is used by the RCC HAL module to compute the system frequency |
|||
* (when HSE is used as system clock source, directly or through the PLL). |
|||
*/ |
|||
#ifndef HSE_VALUE |
|||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ |
|||
#endif /* HSE_VALUE */ |
|||
|
|||
#ifndef HSE_STARTUP_TIMEOUT |
|||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ |
|||
#endif /* HSE_STARTUP_TIMEOUT */ |
|||
|
|||
/**
|
|||
* @brief Internal High Speed oscillator (HSI) value. |
|||
* This value is used by the RCC HAL module to compute the system frequency |
|||
* (when HSI is used as system clock source, directly or through the PLL). |
|||
*/ |
|||
#ifndef HSI_VALUE |
|||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */ |
|||
#endif /* HSI_VALUE */ |
|||
|
|||
/**
|
|||
* @brief Internal Low Speed oscillator (LSI) value. |
|||
*/ |
|||
#ifndef LSI_VALUE |
|||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */ |
|||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
|||
The real value may vary depending on the variations |
|||
in voltage and temperature. */ |
|||
/**
|
|||
* @brief External Low Speed oscillator (LSE) value. |
|||
*/ |
|||
#ifndef LSE_VALUE |
|||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ |
|||
#endif /* LSE_VALUE */ |
|||
|
|||
#ifndef LSE_STARTUP_TIMEOUT |
|||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ |
|||
#endif /* LSE_STARTUP_TIMEOUT */ |
|||
|
|||
/**
|
|||
* @brief External clock source for I2S peripheral |
|||
* This value is used by the I2S HAL module to compute the I2S clock source |
|||
* frequency, this source is inserted directly through I2S_CKIN pad. |
|||
*/ |
|||
#ifndef EXTERNAL_CLOCK_VALUE |
|||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/ |
|||
#endif /* EXTERNAL_CLOCK_VALUE */ |
|||
|
|||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
|||
=== you can define the HSE value in your toolchain compiler preprocessor. */ |
|||
|
|||
/* ########################### System Configuration ######################### */ |
|||
/**
|
|||
* @brief This is the HAL system configuration section |
|||
*/ |
|||
#if !defined (VDD_VALUE) |
|||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */ |
|||
#endif |
|||
#if !defined (TICK_INT_PRIORITY) |
|||
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ |
|||
#endif |
|||
#if !defined (USE_RTOS) |
|||
#define USE_RTOS 0U |
|||
#endif |
|||
#if !defined (PREFETCH_ENABLE) |
|||
#define PREFETCH_ENABLE 1U |
|||
#endif |
|||
#if !defined (INSTRUCTION_CACHE_ENABLE) |
|||
#define INSTRUCTION_CACHE_ENABLE 1U |
|||
#endif |
|||
#if !defined (DATA_CACHE_ENABLE) |
|||
#define DATA_CACHE_ENABLE 1U |
|||
#endif |
|||
|
|||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ |
|||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ |
|||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ |
|||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ |
|||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ |
|||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ |
|||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ |
|||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ |
|||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ |
|||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ |
|||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ |
|||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ |
|||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ |
|||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ |
|||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ |
|||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ |
|||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ |
|||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ |
|||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ |
|||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ |
|||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ |
|||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ |
|||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ |
|||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ |
|||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ |
|||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ |
|||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ |
|||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ |
|||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ |
|||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ |
|||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ |
|||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ |
|||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ |
|||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ |
|||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ |
|||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ |
|||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ |
|||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ |
|||
|
|||
/* ########################## Assert Selection ############################## */ |
|||
/**
|
|||
* @brief Uncomment the line below to expanse the "assert_param" macro in the |
|||
* HAL drivers code |
|||
*/ |
|||
/* #define USE_FULL_ASSERT 1U */ |
|||
|
|||
/* ################## Ethernet peripheral configuration ##################### */ |
|||
|
|||
/* Section 1 : Ethernet peripheral configuration */ |
|||
|
|||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ |
|||
#define MAC_ADDR0 2U |
|||
#define MAC_ADDR1 0U |
|||
#define MAC_ADDR2 0U |
|||
#define MAC_ADDR3 0U |
|||
#define MAC_ADDR4 0U |
|||
#define MAC_ADDR5 0U |
|||
|
|||
/* Definition of the Ethernet driver buffers size and count */ |
|||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ |
|||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ |
|||
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ |
|||
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ |
|||
|
|||
/* Section 2: PHY configuration section */ |
|||
|
|||
/* DP83848_PHY_ADDRESS Address*/ |
|||
#define DP83848_PHY_ADDRESS 0x01U |
|||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ |
|||
#define PHY_RESET_DELAY 0x000000FFU |
|||
/* PHY Configuration delay */ |
|||
#define PHY_CONFIG_DELAY 0x00000FFFU |
|||
|
|||
#define PHY_READ_TO 0x0000FFFFU |
|||
#define PHY_WRITE_TO 0x0000FFFFU |
|||
|
|||
/* Section 3: Common PHY Registers */ |
|||
|
|||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ |
|||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ |
|||
|
|||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ |
|||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ |
|||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ |
|||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ |
|||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ |
|||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ |
|||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ |
|||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ |
|||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ |
|||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ |
|||
|
|||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ |
|||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ |
|||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ |
|||
|
|||
/* Section 4: Extended PHY Registers */ |
|||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ |
|||
|
|||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ |
|||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ |
|||
|
|||
/* ################## SPI peripheral configuration ########################## */ |
|||
|
|||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
|||
* Activated: CRC code is present inside driver |
|||
* Deactivated: CRC code cleaned from driver |
|||
*/ |
|||
#ifndef USE_SPI_CRC |
|||
#define USE_SPI_CRC 0U |
|||
#endif |
|||
|
|||
/* Includes ------------------------------------------------------------------*/ |
|||
/**
|
|||
* @brief Include module's header file |
|||
*/ |
|||
|
|||
#ifdef HAL_RCC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_rcc.h" |
|||
#endif /* HAL_RCC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_GPIO_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_gpio.h" |
|||
#endif /* HAL_GPIO_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_EXTI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_exti.h" |
|||
#endif /* HAL_EXTI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DMA_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dma.h" |
|||
#endif /* HAL_DMA_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CORTEX_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_cortex.h" |
|||
#endif /* HAL_CORTEX_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_ADC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_adc.h" |
|||
#endif /* HAL_ADC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CAN_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_can.h" |
|||
#endif /* HAL_CAN_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_can_legacy.h" |
|||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CRC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_crc.h" |
|||
#endif /* HAL_CRC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CRYP_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_cryp.h" |
|||
#endif /* HAL_CRYP_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DMA2D_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dma2d.h" |
|||
#endif /* HAL_DMA2D_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DAC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dac.h" |
|||
#endif /* HAL_DAC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DCMI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dcmi.h" |
|||
#endif /* HAL_DCMI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_ETH_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_eth.h" |
|||
#endif /* HAL_ETH_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_FLASH_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_flash.h" |
|||
#endif /* HAL_FLASH_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SRAM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sram.h" |
|||
#endif /* HAL_SRAM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_NOR_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_nor.h" |
|||
#endif /* HAL_NOR_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_NAND_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_nand.h" |
|||
#endif /* HAL_NAND_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_PCCARD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_pccard.h" |
|||
#endif /* HAL_PCCARD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SDRAM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sdram.h" |
|||
#endif /* HAL_SDRAM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_HASH_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_hash.h" |
|||
#endif /* HAL_HASH_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_I2C_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_i2c.h" |
|||
#endif /* HAL_I2C_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SMBUS_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_smbus.h" |
|||
#endif /* HAL_SMBUS_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_I2S_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_i2s.h" |
|||
#endif /* HAL_I2S_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_IWDG_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_iwdg.h" |
|||
#endif /* HAL_IWDG_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_LTDC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_ltdc.h" |
|||
#endif /* HAL_LTDC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_PWR_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_pwr.h" |
|||
#endif /* HAL_PWR_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_RNG_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_rng.h" |
|||
#endif /* HAL_RNG_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_RTC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_rtc.h" |
|||
#endif /* HAL_RTC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SAI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sai.h" |
|||
#endif /* HAL_SAI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sd.h" |
|||
#endif /* HAL_SD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SPI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_spi.h" |
|||
#endif /* HAL_SPI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_TIM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_tim.h" |
|||
#endif /* HAL_TIM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_UART_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_uart.h" |
|||
#endif /* HAL_UART_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_USART_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_usart.h" |
|||
#endif /* HAL_USART_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_IRDA_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_irda.h" |
|||
#endif /* HAL_IRDA_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SMARTCARD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_smartcard.h" |
|||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_WWDG_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_wwdg.h" |
|||
#endif /* HAL_WWDG_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_PCD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_pcd.h" |
|||
#endif /* HAL_PCD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_HCD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_hcd.h" |
|||
#endif /* HAL_HCD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DSI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dsi.h" |
|||
#endif /* HAL_DSI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_QSPI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_qspi.h" |
|||
#endif /* HAL_QSPI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CEC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_cec.h" |
|||
#endif /* HAL_CEC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_FMPI2C_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_fmpi2c.h" |
|||
#endif /* HAL_FMPI2C_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SPDIFRX_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_spdifrx.h" |
|||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DFSDM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dfsdm.h" |
|||
#endif /* HAL_DFSDM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_LPTIM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_lptim.h" |
|||
#endif /* HAL_LPTIM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_MMC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_mmc.h" |
|||
#endif /* HAL_MMC_MODULE_ENABLED */ |
|||
|
|||
/* Exported macro ------------------------------------------------------------*/ |
|||
#ifdef USE_FULL_ASSERT |
|||
/**
|
|||
* @brief The assert_param macro is used for function's parameters check. |
|||
* @param expr If expr is false, it calls assert_failed function |
|||
* which reports the name of the source file and the source |
|||
* line number of the call that failed. |
|||
* If expr is true, it returns no value. |
|||
* @retval None |
|||
*/ |
|||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) |
|||
/* Exported functions ------------------------------------------------------- */ |
|||
void assert_failed(uint8_t *file, uint32_t line); |
|||
#else |
|||
#define assert_param(expr) ((void)0U) |
|||
#endif /* USE_FULL_ASSERT */ |
|||
|
|||
#ifdef __cplusplus |
|||
} |
|||
#endif |
|||
|
|||
#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */ |
|||
|
|||
|
|||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
|||
@ -0,0 +1,187 @@ |
|||
/* |
|||
***************************************************************************** |
|||
** |
|||
** File : ldscript.ld |
|||
** |
|||
** Abstract : Linker script for STM32F401RETx Device with |
|||
** 512KByte FLASH, 96KByte RAM |
|||
** |
|||
** Set heap size, stack size and stack location according |
|||
** to application requirements. |
|||
** |
|||
** Set memory bank area and size if external memory is used. |
|||
** |
|||
** Target : STMicroelectronics STM32 |
|||
** |
|||
** |
|||
** Distribution: The file is distributed as is, without any warranty |
|||
** of any kind. |
|||
** |
|||
***************************************************************************** |
|||
** @attention |
|||
** |
|||
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2> |
|||
** |
|||
** Redistribution and use in source and binary forms, with or without modification, |
|||
** are permitted provided that the following conditions are met: |
|||
** 1. Redistributions of source code must retain the above copyright notice, |
|||
** this list of conditions and the following disclaimer. |
|||
** 2. Redistributions in binary form must reproduce the above copyright notice, |
|||
** this list of conditions and the following disclaimer in the documentation |
|||
** and/or other materials provided with the distribution. |
|||
** 3. Neither the name of Ac6 nor the names of its contributors |
|||
** may be used to endorse or promote products derived from this software |
|||
** without specific prior written permission. |
|||
** |
|||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|||
** |
|||
***************************************************************************** |
|||
*/ |
|||
|
|||
/* Entry Point */ |
|||
ENTRY(Reset_Handler) |
|||
|
|||
/* Highest address of the user mode stack */ |
|||
_estack = 0x20018000; /* end of RAM */ |
|||
/* Generate a link error if heap and stack don't fit into RAM */ |
|||
_Min_Heap_Size = 0x200; /* required amount of heap */ |
|||
_Min_Stack_Size = 0x400; /* required amount of stack */ |
|||
|
|||
/* Specify the memory areas */ |
|||
MEMORY |
|||
{ |
|||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K |
|||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K |
|||
} |
|||
|
|||
/* Define output sections */ |
|||
SECTIONS |
|||
{ |
|||
/* The startup code goes first into FLASH */ |
|||
.isr_vector : |
|||
{ |
|||
. = ALIGN(4); |
|||
KEEP(*(.isr_vector)) /* Startup code */ |
|||
. = ALIGN(4); |
|||
} >FLASH |
|||
|
|||
/* The program code and other data goes into FLASH */ |
|||
.text : |
|||
{ |
|||
. = ALIGN(4); |
|||
*(.text) /* .text sections (code) */ |
|||
*(.text*) /* .text* sections (code) */ |
|||
*(.glue_7) /* glue arm to thumb code */ |
|||
*(.glue_7t) /* glue thumb to arm code */ |
|||
*(.eh_frame) |
|||
|
|||
KEEP (*(.init)) |
|||
KEEP (*(.fini)) |
|||
|
|||
. = ALIGN(4); |
|||
_etext = .; /* define a global symbols at end of code */ |
|||
} >FLASH |
|||
|
|||
/* Constant data goes into FLASH */ |
|||
.rodata : |
|||
{ |
|||
. = ALIGN(4); |
|||
*(.rodata) /* .rodata sections (constants, strings, etc.) */ |
|||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */ |
|||
. = ALIGN(4); |
|||
} >FLASH |
|||
|
|||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH |
|||
.ARM : { |
|||
__exidx_start = .; |
|||
*(.ARM.exidx*) |
|||
__exidx_end = .; |
|||
} >FLASH |
|||
|
|||
.preinit_array : |
|||
{ |
|||
PROVIDE_HIDDEN (__preinit_array_start = .); |
|||
KEEP (*(.preinit_array*)) |
|||
PROVIDE_HIDDEN (__preinit_array_end = .); |
|||
} >FLASH |
|||
.init_array : |
|||
{ |
|||
PROVIDE_HIDDEN (__init_array_start = .); |
|||
KEEP (*(SORT(.init_array.*))) |
|||
KEEP (*(.init_array*)) |
|||
PROVIDE_HIDDEN (__init_array_end = .); |
|||
} >FLASH |
|||
.fini_array : |
|||
{ |
|||
PROVIDE_HIDDEN (__fini_array_start = .); |
|||
KEEP (*(SORT(.fini_array.*))) |
|||
KEEP (*(.fini_array*)) |
|||
PROVIDE_HIDDEN (__fini_array_end = .); |
|||
} >FLASH |
|||
|
|||
/* used by the startup to initialize data */ |
|||
_sidata = LOADADDR(.data); |
|||
|
|||
/* Initialized data sections goes into RAM, load LMA copy after code */ |
|||
.data : |
|||
{ |
|||
. = ALIGN(4); |
|||
_sdata = .; /* create a global symbol at data start */ |
|||
*(.data) /* .data sections */ |
|||
*(.data*) /* .data* sections */ |
|||
|
|||
. = ALIGN(4); |
|||
_edata = .; /* define a global symbol at data end */ |
|||
} >RAM AT> FLASH |
|||
|
|||
|
|||
/* Uninitialized data section */ |
|||
. = ALIGN(4); |
|||
.bss : |
|||
{ |
|||
/* This is used by the startup in order to initialize the .bss secion */ |
|||
_sbss = .; /* define a global symbol at bss start */ |
|||
__bss_start__ = _sbss; |
|||
*(.bss) |
|||
*(.bss*) |
|||
*(COMMON) |
|||
|
|||
. = ALIGN(4); |
|||
_ebss = .; /* define a global symbol at bss end */ |
|||
__bss_end__ = _ebss; |
|||
} >RAM |
|||
|
|||
/* User_heap_stack section, used to check that there is enough RAM left */ |
|||
._user_heap_stack : |
|||
{ |
|||
. = ALIGN(4); |
|||
PROVIDE ( end = . ); |
|||
PROVIDE ( _end = . ); |
|||
. = . + _Min_Heap_Size; |
|||
. = . + _Min_Stack_Size; |
|||
. = ALIGN(4); |
|||
} >RAM |
|||
|
|||
|
|||
|
|||
/* Remove information from the standard libraries */ |
|||
/DISCARD/ : |
|||
{ |
|||
libc.a ( * ) |
|||
libm.a ( * ) |
|||
libgcc.a ( * ) |
|||
} |
|||
|
|||
.ARM.attributes 0 : { *(.ARM.attributes) } |
|||
} |
|||
|
|||
|
|||
@ -0,0 +1,315 @@ |
|||
/*
|
|||
******************************************************************************* |
|||
* Copyright (c) 2017, STMicroelectronics |
|||
* All rights reserved. |
|||
* |
|||
* Redistribution and use in source and binary forms, with or without |
|||
* modification, are permitted provided that the following conditions are met: |
|||
* |
|||
* 1. Redistributions of source code must retain the above copyright notice, |
|||
* this list of conditions and the following disclaimer. |
|||
* 2. Redistributions in binary form must reproduce the above copyright notice, |
|||
* this list of conditions and the following disclaimer in the documentation |
|||
* and/or other materials provided with the distribution. |
|||
* 3. Neither the name of STMicroelectronics nor the names of its contributors |
|||
* may be used to endorse or promote products derived from this software |
|||
* without specific prior written permission. |
|||
* |
|||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|||
******************************************************************************* |
|||
*/ |
|||
|
|||
#ifndef _VARIANT_ARDUINO_STM32_ |
|||
#define _VARIANT_ARDUINO_STM32_ |
|||
/*----------------------------------------------------------------------------
|
|||
* Headers |
|||
*----------------------------------------------------------------------------*/ |
|||
|
|||
#ifdef __cplusplus |
|||
extern "C" { |
|||
#endif // __cplusplus
|
|||
|
|||
/*----------------------------------------------------------------------------
|
|||
* Pins |
|||
*----------------------------------------------------------------------------*/ |
|||
#if defined(ARDUINO_STEVAL) |
|||
|
|||
|
|||
/*----------------------------------------------------------------------------
|
|||
* Pins |
|||
*----------------------------------------------------------------------------*/ |
|||
// USART1_MAIN
|
|||
#define PA9 0 //TX
|
|||
#define PA10 1 //RX
|
|||
|
|||
// WIFI
|
|||
#define PD3 2 // CTS
|
|||
#define PD4 3 // RTS
|
|||
#define PD5 4 // TX
|
|||
#define PD6 5 // RX
|
|||
#define PB5 6 // WIFI_WAKEUP
|
|||
#define PE11 7 // WIFI_RESET
|
|||
#define PE12 8 // WIFI_BOOT
|
|||
|
|||
// STATUS_LED
|
|||
#define PE1 9 // STATUS_LED
|
|||
|
|||
// SPI USER
|
|||
#define PB12 10 // SPI_CS
|
|||
#define PB15 11 // SPI_MOSI
|
|||
#define PB14 12 // SPI_MISO
|
|||
#define PB13 13 // SPI_SCK
|
|||
|
|||
// I2C USER
|
|||
#define PB7 14 // SDA
|
|||
#define PB6 15 // SCL
|
|||
|
|||
// SPI
|
|||
#define PA4 16 // SPI_CS
|
|||
#define PA5 17 // SPI_SCK
|
|||
#define PA6 18 // SPI_MISO
|
|||
#define PA7 19 // SPI_MOSI
|
|||
|
|||
// JTAG
|
|||
#define PA13 20 // JTAG_TMS/SWDIO
|
|||
#define PA14 21 // JTAG_TCK/SWCLK
|
|||
#define PB3 22 // JTAG_TDO/SWO
|
|||
|
|||
// SDCARD
|
|||
#define PC8 23 // SDIO_D0
|
|||
#define PC9 24 // SDIO_D1
|
|||
#define PA15 25 // SD_CARD_DETECT
|
|||
#define PC10 26 // SDIO_D2
|
|||
#define PC11 27 // SDIO_D3
|
|||
#define PC12 28 // SDIO_CK
|
|||
#define PD2 29 // SDIO_CMD
|
|||
|
|||
// OTG
|
|||
#define PA11 30 //OTG_DM
|
|||
#define PA12 31 //OTG_DP
|
|||
|
|||
// IR/PROBE
|
|||
#define PD1 32 //IR_OUT
|
|||
#define PC1 33 //IR_ON
|
|||
|
|||
// USER_PINS
|
|||
#define PD7 34 // USER3
|
|||
#define PB9 35 // USER1
|
|||
#define PE0 36 // USER2
|
|||
#define PB4 37 // USER4
|
|||
|
|||
// USERKET
|
|||
#define PE7 38 // USER_BUTTON
|
|||
|
|||
// ENDSTOPS
|
|||
#define PD8 39 // X_STOP
|
|||
#define PD9 40 // Y_STOP
|
|||
#define PD10 41 // Z_STOP
|
|||
#define PD11 42 // U_STOP
|
|||
#define PA8 43 // V_STOP
|
|||
#define PD0 44 // W_STOP
|
|||
|
|||
// HEATERS
|
|||
#define PD13 45 // BED_HEAT_2
|
|||
#define PD14 46 // BED_HEAT_1
|
|||
#define PD15 47 // BED_HEAT_3
|
|||
#define PC7 48 // E1_HEAT_PWM
|
|||
#define PB0 49 // E2_HEAT_PWM
|
|||
#define PB1 50 // E3_HEAT_PWM
|
|||
|
|||
// THERMISTOR
|
|||
#define PC2 51 // BED_THERMISTOR_1
|
|||
#define PC3 52 // BED_THERMISTOR_2
|
|||
#define PA3 53 // BED_THERMISTOR_3
|
|||
#define PA0 54 // E1_THERMISTOR
|
|||
#define PA1 55 // E2_THERMISTOR
|
|||
#define PA2 56 // E3_THERMISTOR
|
|||
|
|||
// FANS
|
|||
#define PC4 57 // E1_FAN
|
|||
#define PC5 58 // E2_FAN
|
|||
#define PE8 59 // E3_FAN
|
|||
|
|||
// X_MOTOR
|
|||
#define PE13 60 // X_RESET
|
|||
#define PE14 61 // X_PWM
|
|||
#define PE15 62 // X_DIR
|
|||
|
|||
// Y_MOTOR
|
|||
#define PE10 63 // Y_RESET
|
|||
#define PB10 64 // Y_PWM
|
|||
#define PE9 65 // Y_DIR
|
|||
|
|||
// Z_MOTOR
|
|||
#define PC15 66 // Z_RESET
|
|||
#define PC6 67 // Z_PWM
|
|||
#define PC0 68 // Z_DIR
|
|||
|
|||
// E1_MOTOR
|
|||
#define PC14 69 // E1_RESET
|
|||
#define PC13 70 // E1_DIR
|
|||
#define PD12 71 // E1_PWM
|
|||
|
|||
// E2_MOTOR
|
|||
#define PE4 72 // E2_RESET
|
|||
#define PE5 73 // E2_PWM
|
|||
#define PE6 74 // E2_DIR
|
|||
|
|||
// E3_MOTOR
|
|||
#define PE3 75 // E3_RESET
|
|||
#define PE2 76 // E3_DIR
|
|||
#define PB8 77 // E3_PWM
|
|||
|
|||
// This must be a literal
|
|||
#define NUM_DIGITAL_PINS 78 |
|||
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
|||
#define NUM_ANALOG_INPUTS 6 |
|||
#define NUM_ANALOG_FIRST 51 |
|||
|
|||
// On-board LED pin number
|
|||
#define LED_BUILTIN PE1 |
|||
#define LED_GREEN LED_BUILTIN |
|||
|
|||
// On-board user button
|
|||
#define USER_BTN PE7 |
|||
|
|||
// UART Definitions
|
|||
#define SERIAL_UART_INSTANCE 1 //Connected to ST-Link
|
|||
|
|||
// Default pin used for 'Serial' instance (ex: ST-Link)
|
|||
// Mandatory for Firmata
|
|||
#define PIN_SERIAL_RX PA10 |
|||
#define PIN_SERIAL_TX PA9 |
|||
|
|||
/* SD detect signal */ |
|||
/*
|
|||
* By default, R67 is not provided, so SD card detect is not used. |
|||
* Note: SD CD (pin 16 of expansion connector J23) can be connected |
|||
* to GND in order to be able to use SD_DETECT_PIN |
|||
*/ |
|||
/*#define SD_DETECT_PIN PA15*/ |
|||
|
|||
/* HAL configuration */ |
|||
#define HSE_VALUE 25000000U |
|||
|
|||
/* Extra HAL modules */ |
|||
#define HAL_SD_MODULE_ENABLED |
|||
|
|||
#endif |
|||
|
|||
#ifdef __cplusplus |
|||
} // extern "C"
|
|||
#endif |
|||
/*----------------------------------------------------------------------------
|
|||
* Arduino objects - C++ only |
|||
*----------------------------------------------------------------------------*/ |
|||
|
|||
#ifdef __cplusplus |
|||
// These serial port names are intended to allow libraries and architecture-neutral
|
|||
// sketches to automatically default to the correct port name for a particular type
|
|||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
|||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
|||
//
|
|||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
|||
//
|
|||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
|||
//
|
|||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
|||
//
|
|||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
|||
//
|
|||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
|||
// pins are NOT connected to anything by default.
|
|||
#define SERIAL_PORT_MONITOR Serial |
|||
#define SERIAL_PORT_HARDWARE Serial1 |
|||
#endif |
|||
|
|||
#endif // _VARIANT_ARDUINO_STM32_
|
|||
|
|||
// PA0 54 // E1_THERMISTOR
|
|||
// PA1 55 // E2_THERMISTOR
|
|||
// PA2 56 // E3_THERMISTOR
|
|||
// PA3 53 // BED_THERMISTOR_3
|
|||
// PA4 16 // SPI_CS
|
|||
// PA5 17 // SPI_SCK
|
|||
// PA6 18 // SPI_MISO
|
|||
// PA7 19 // SPI_MOSI
|
|||
// PA8 43 // V_STOP
|
|||
// PA9 0 //TX
|
|||
// PA10 1 //RX
|
|||
// PA11 30 //OTG_DM
|
|||
// PA12 31 //OTG_DP
|
|||
// PA13 20 // JTAG_TMS/SWDIO
|
|||
// PA14 21 // JTAG_TCK/SWCLK
|
|||
// PA15 25 // SD_CARD_DETECT
|
|||
// PB0 49 // E2_HEAT_PWM
|
|||
// PB1 50 // E3_HEAT_PWM
|
|||
// PB3 22 // JTAG_TDO/SWO
|
|||
// PB4 37 // USER4
|
|||
// PB5 6 // WIFI_WAKEUP
|
|||
// PB6 15 // SCL
|
|||
// PB7 14 // SDA
|
|||
// PB8 77 // E3_PWM
|
|||
// PB9 35 // USER1
|
|||
// PB10 64 // Y_PWM
|
|||
// PB12 10 // SPI_CS
|
|||
// PB13 13 // SPI_SCK
|
|||
// PB14 12 // SPI_MISO
|
|||
// PB15 11 // SPI_MOSI
|
|||
// PC0 68 // Z_DIR
|
|||
// PC1 33 //IR_ON
|
|||
// PC2 51 // BED_THERMISTOR_1
|
|||
// PC3 52 // BED_THERMISTOR_2
|
|||
// PC4 57 // E1_FAN
|
|||
// PC5 58 // E2_FAN
|
|||
// PC6 67 // Z_PWM
|
|||
// PC7 48 // E1_HEAT_PWM
|
|||
// PC8 23 // SDIO_D0
|
|||
// PC9 24 // SDIO_D1
|
|||
// PC10 26 // SDIO_D2
|
|||
// PC11 27 // SDIO_D3
|
|||
// PC12 28 // SDIO_CK
|
|||
// PC13 70 // E1_DIR
|
|||
// PC14 69 // E1_RESET
|
|||
// PC15 66 // Z_RESET
|
|||
// PD0 44 // W_STOP
|
|||
// PD1 32 //IR_OUT
|
|||
// PD2 29 // SDIO_CMD
|
|||
// PD3 2 // CTS
|
|||
// PD4 3 // RTS
|
|||
// PD5 4 // TX
|
|||
// PD6 5 // RX
|
|||
// PD7 34 // USER3
|
|||
// PD8 39 // X_STOP
|
|||
// PD9 40 // Y_STOP
|
|||
// PD10 41 // Z_STOP
|
|||
// PD11 42 // U_STOP
|
|||
// PD12 71 // E1_PWM
|
|||
// PD13 45 // BED_HEAT_2
|
|||
// PD14 46 // BED_HEAT_1
|
|||
// PD15 47 // BED_HEAT_3
|
|||
// PE0 36 // USER2
|
|||
// PE1 9 // STATUS_LED
|
|||
// PE2 76 // E3_DIR
|
|||
// PE3 75 // E3_RESET
|
|||
// PE4 72 // E2_RESET
|
|||
// PE5 73 // E2_PWM
|
|||
// PE6 74 // E2_DIR
|
|||
// PE7 38 // USER_BUTTON
|
|||
// PE8 59 // E3_FAN
|
|||
// PE9 65 // Y_DIR
|
|||
// PE10 63 // Y_RESET
|
|||
// PE11 7 // WIFI_RESET
|
|||
// PE12 8 // WIFI_BOOT
|
|||
// PE13 60 // X_RESET
|
|||
// PE14 61 // X_PWM
|
|||
// PE15 62 // X_DIR
|
|||
Loading…
Reference in new issue