MS1987
5 years ago
committed by
Scott Lahteine
Scott Lahteine
19 changed files with 5073 additions and 57 deletions
@ -0,0 +1,153 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
/**
|
|||
* MKS Robin Lite 3 (STM32F103RCT6) board pin assignments |
|||
*/ |
|||
|
|||
#ifndef __STM32F1__ |
|||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
|||
#elif HOTENDS > 2 || E_STEPPERS > 2 |
|||
#error "MKS Robin Lite3 supports up to 2 hotends / E-steppers. Comment out this line to continue." |
|||
#endif |
|||
|
|||
#ifndef BOARD_INFO_NAME |
|||
#define BOARD_INFO_NAME "MKS Robin Lite3" |
|||
#endif |
|||
#define BOARD_WEBSITE_URL "github.com/makerbase-mks" |
|||
|
|||
//#define DISABLE_DEBUG
|
|||
#define DISABLE_JTAG |
|||
#define ENABLE_SPI2 |
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN PA3 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_STOP_PIN PA12 |
|||
#define Y_STOP_PIN PA11 |
|||
#define Z_MIN_PIN PC6 |
|||
#define Z_MAX_PIN PB1 |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN PC0 |
|||
#define X_DIR_PIN PB2 |
|||
#define X_ENABLE_PIN PC13 |
|||
|
|||
#define Y_STEP_PIN PC2 |
|||
#define Y_DIR_PIN PB9 |
|||
#define Y_ENABLE_PIN PB12 |
|||
|
|||
#define Z_STEP_PIN PB7 |
|||
#define Z_DIR_PIN PB6 |
|||
#define Z_ENABLE_PIN PB8 |
|||
|
|||
#define E0_STEP_PIN PB4 |
|||
#define E0_DIR_PIN PB3 |
|||
#define E0_ENABLE_PIN PB5 |
|||
|
|||
#define E1_STEP_PIN PC12 |
|||
#define E1_DIR_PIN PC11 |
|||
#define E1_ENABLE_PIN PD2 |
|||
|
|||
//
|
|||
// Heaters 0,1 / Fans / Bed
|
|||
//
|
|||
#define HEATER_0_PIN PC9 |
|||
#define HEATER_1_PIN PC7 |
|||
#define FAN_PIN PA8 |
|||
#define HEATER_BED_PIN PC8 |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_BED_PIN PA1 //TB
|
|||
#define TEMP_0_PIN PA0 //TH1
|
|||
#define TEMP_1_PIN PA2 //TH2
|
|||
|
|||
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
|||
|
|||
//
|
|||
// LCD Pins
|
|||
//
|
|||
#if HAS_SPI_LCD |
|||
|
|||
#define BEEPER_PIN PC1 |
|||
#define BTN_ENC PC3 |
|||
#define LCD_PINS_ENABLE PA4 |
|||
#define LCD_PINS_RS PA5 |
|||
#define BTN_EN1 PB11 |
|||
#define BTN_EN2 PB0 |
|||
|
|||
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|||
#if ENABLED(MKS_MINI_12864) |
|||
|
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
#define LCD_RESET_PIN -1 |
|||
#define DOGLCD_A0 PC4 |
|||
#define DOGLCD_CS PA7 |
|||
#define DOGLCD_SCK PB13 |
|||
#define DOGLCD_MOSI PB15 |
|||
|
|||
// Required for MKS_MINI_12864 with this board
|
|||
#define MKS_LCD12864B |
|||
#undef SHOW_BOOTSCREEN |
|||
|
|||
#else // !MKS_MINI_12864
|
|||
|
|||
#define LCD_PINS_D4 PA6 |
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 PA7 |
|||
#define LCD_PINS_D6 PC4 |
|||
#define LCD_PINS_D7 PC5 |
|||
#endif |
|||
|
|||
#endif // !MKS_MINI_12864
|
|||
|
|||
#endif // HAS_SPI_LCD
|
|||
|
|||
//
|
|||
// SD Card
|
|||
//
|
|||
#define ENABLE_SPI2 |
|||
#define SD_DETECT_PIN PC10 |
|||
#define SCK_PIN PB13 |
|||
#define MISO_PIN PB14 |
|||
#define MOSI_PIN PB15 |
|||
#define SS_PIN PA15 |
|||
|
|||
#ifndef ST7920_DELAY_1 |
|||
#define ST7920_DELAY_1 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_2 |
|||
#define ST7920_DELAY_2 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_3 |
|||
#define ST7920_DELAY_3 DELAY_NS(125) |
|||
#endif |
|||
@ -0,0 +1,274 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
/**
|
|||
* MKS Robin pro (STM32F103ZET6) board pin assignments |
|||
*/ |
|||
|
|||
#ifndef __STM32F1__ |
|||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
|||
#elif HOTENDS > 3 || E_STEPPERS > 3 |
|||
#error "MKS Robin pro supports up to 3 hotends / E-steppers. Comment out this line to continue." |
|||
#endif |
|||
|
|||
#define BOARD_INFO_NAME "MKS Robin pro" |
|||
|
|||
//
|
|||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
|||
//
|
|||
#define DISABLE_DEBUG |
|||
|
|||
//
|
|||
// Note: MKS Robin board is using SPI2 interface.
|
|||
//
|
|||
//#define SPI_MODULE 2
|
|||
#define ENABLE_SPI2 |
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN PA8 // BLTOUCH
|
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN PA15 |
|||
#define X_MAX_PIN PG7 |
|||
#define Y_MIN_PIN PA12 |
|||
#define Y_MAX_PIN PG8 |
|||
#define Z_MIN_PIN PA11 |
|||
#define Z_MAX_PIN PC4 |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_ENABLE_PIN PE4 |
|||
#define X_STEP_PIN PE3 |
|||
#define X_DIR_PIN PE2 |
|||
#ifndef X_CS_PIN |
|||
#define X_CS_PIN PF8 |
|||
#endif |
|||
|
|||
#define Y_ENABLE_PIN PE1 |
|||
#define Y_STEP_PIN PE0 |
|||
#define Y_DIR_PIN PB9 |
|||
#ifndef Y_CS_PIN |
|||
#define Y_CS_PIN PF3 |
|||
#endif |
|||
|
|||
#define Z_ENABLE_PIN PB8 |
|||
#define Z_STEP_PIN PB5 |
|||
#define Z_DIR_PIN PB4 |
|||
#ifndef Z_CS_PIN |
|||
#define Z_CS_PIN PF6 |
|||
#endif |
|||
|
|||
#define E0_ENABLE_PIN PB3 |
|||
#define E0_STEP_PIN PD6 |
|||
#define E0_DIR_PIN PD3 |
|||
#ifndef E0_CS_PIN |
|||
#define E0_CS_PIN PG15 |
|||
#endif |
|||
|
|||
#define E1_ENABLE_PIN PA3 |
|||
#define E1_STEP_PIN PA6 |
|||
#define E1_DIR_PIN PA1 |
|||
#ifndef E1_CS_PIN |
|||
#define E1_CS_PIN PG10 |
|||
#endif |
|||
|
|||
#define E2_ENABLE_PIN PF0 |
|||
#define E2_STEP_PIN PF2 |
|||
#define E2_DIR_PIN PF1 |
|||
#ifndef E2_CS_PIN |
|||
#define E2_CS_PIN PG9 |
|||
#endif |
|||
//
|
|||
// Software SPI pins for TMC2130 stepper drivers
|
|||
//
|
|||
#if ENABLED(TMC_USE_SW_SPI) |
|||
#ifndef TMC_SW_MOSI |
|||
#define TMC_SW_MOSI PB15 |
|||
#endif |
|||
#ifndef TMC_SW_MISO |
|||
#define TMC_SW_MISO PB14 |
|||
#endif |
|||
#ifndef TMC_SW_SCK |
|||
#define TMC_SW_SCK PB13 |
|||
#endif |
|||
#endif |
|||
|
|||
#if HAS_TMC220x |
|||
/**
|
|||
* TMC2208/TMC2209 stepper drivers |
|||
* |
|||
* Hardware serial communication ports. |
|||
* If undefined software serial is used according to the pins below |
|||
*/ |
|||
//#define X_HARDWARE_SERIAL Serial
|
|||
//#define X2_HARDWARE_SERIAL Serial1
|
|||
//#define Y_HARDWARE_SERIAL Serial1
|
|||
//#define Y2_HARDWARE_SERIAL Serial1
|
|||
//#define Z_HARDWARE_SERIAL Serial1
|
|||
//#define Z2_HARDWARE_SERIAL Serial1
|
|||
//#define E0_HARDWARE_SERIAL Serial1
|
|||
//#define E1_HARDWARE_SERIAL Serial1
|
|||
//#define E2_HARDWARE_SERIAL Serial1
|
|||
//#define E3_HARDWARE_SERIAL Serial1
|
|||
//#define E4_HARDWARE_SERIAL Serial1
|
|||
|
|||
//
|
|||
// Software serial
|
|||
//
|
|||
#define X_SERIAL_TX_PIN PF7 |
|||
#define X_SERIAL_RX_PIN PF8 |
|||
|
|||
#define Y_SERIAL_TX_PIN PF4 |
|||
#define Y_SERIAL_RX_PIN PF3 |
|||
|
|||
#define Z_SERIAL_TX_PIN PF5 |
|||
#define Z_SERIAL_RX_PIN PF6 |
|||
|
|||
#define E0_SERIAL_TX_PIN PG13 |
|||
#define E0_SERIAL_RX_PIN PG15 |
|||
|
|||
#define E1_SERIAL_TX_PIN PG12 |
|||
#define E1_SERIAL_RX_PIN PG10 |
|||
|
|||
#define E2_SERIAL_TX_PIN PC13 |
|||
#define E2_SERIAL_RX_PIN PG9 |
|||
#endif |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN PC1 // TH1
|
|||
#define TEMP_1_PIN PC2 // TH2
|
|||
#define TEMP_2_PIN PC3 // TH3
|
|||
#define TEMP_BED_PIN PC0 // TB1
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN PF10 // +HE0-
|
|||
#define HEATER_1_PIN PB0 // +HE1-
|
|||
#define HEATER_2_PIN PF9 // +HE2-
|
|||
#define HEATER_BED_PIN PA0 // +HOT-BED-
|
|||
#define FAN_PIN PB1 // +FAN-
|
|||
|
|||
/**
|
|||
* Note: MKS Robin Pro board is using SPI2 interface. Make sure your stm32duino library is configured accordingly |
|||
*/ |
|||
//#define MAX6675_SS_PIN PE5 // TC1 - CS1
|
|||
//#define MAX6675_SS_PIN PF11 // TC2 - CS2
|
|||
|
|||
#define POWER_LOSS_PIN PA2 // PW_DET
|
|||
#define PS_ON_PIN PG11 // PW_OFF
|
|||
#define FIL_RUNOUT_PIN PA4 // MT_DET1
|
|||
//#define FIL_RUNOUT_PIN PE6 // MT_DET2
|
|||
//#define FIL_RUNOUT_PIN PG14 // MT_DET3
|
|||
|
|||
//
|
|||
// SD Card
|
|||
//
|
|||
#ifndef SDCARD_CONNECTION |
|||
#define SDCARD_CONNECTION ONBOARD |
|||
#endif |
|||
|
|||
#if SD_CONNECTION_IS(LCD) |
|||
#define ENABLE_SPI2 |
|||
#define SD_DETECT_PIN PG3 |
|||
#define SCK_PIN PB13 |
|||
#define MISO_PIN PB14 |
|||
#define MOSI_PIN PB15 |
|||
#define SS_PIN PG6 |
|||
#elif SD_CONNECTION_IS(ONBOARD) |
|||
#define SDIO_SUPPORT |
|||
#define SD_DETECT_PIN PD12 |
|||
#elif SD_CONNECTION_IS(CUSTOM_CABLE) |
|||
#error "No custom SD drive cable defined for this board." |
|||
#endif |
|||
|
|||
/**
|
|||
* Note: MKS Robin TFT screens use various TFT controllers. |
|||
* If the screen stays white, disable 'LCD_RESET_PIN' |
|||
* to let the bootloader init the screen. |
|||
*/ |
|||
#if ENABLED(FSMC_GRAPHICAL_TFT) |
|||
#define FSMC_CS_PIN PD7 // NE4
|
|||
#define FSMC_RS_PIN PD11 // A0
|
|||
|
|||
#define LCD_RESET_PIN PF6 |
|||
#define NO_LCD_REINIT // Suppress LCD re-initialization
|
|||
|
|||
#define LCD_BACKLIGHT_PIN PD13 |
|||
|
|||
#if ENABLED(TOUCH_BUTTONS) |
|||
#define TOUCH_CS_PIN PA7 |
|||
#else |
|||
#define BEEPER_PIN PC5 |
|||
#define BTN_ENC PG2 |
|||
#define BTN_EN1 PG5 |
|||
#define BTN_EN2 PG4 |
|||
#endif |
|||
|
|||
#elif HAS_SPI_LCD |
|||
|
|||
#define BEEPER_PIN PC5 |
|||
#define BTN_ENC PG2 |
|||
#define LCD_PINS_ENABLE PG0 |
|||
#define LCD_PINS_RS PG1 |
|||
#define BTN_EN1 PG5 |
|||
#define BTN_EN2 PG4 |
|||
|
|||
// MKS MINI12864 and MKS LCD12864B. If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|||
#if ENABLED(MKS_MINI_12864) |
|||
|
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
#define LCD_RESET_PIN -1 |
|||
#define DOGLCD_A0 PF12 |
|||
#define DOGLCD_CS PF15 |
|||
#define DOGLCD_SCK PB13 |
|||
#define DOGLCD_MOSI PB15 |
|||
|
|||
#else // !MKS_MINI_12864
|
|||
|
|||
#define LCD_PINS_D4 PF14 |
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 PF15 |
|||
#define LCD_PINS_D6 PF12 |
|||
#define LCD_PINS_D7 PF13 |
|||
#endif |
|||
|
|||
#endif // !MKS_MINI_12864
|
|||
#endif |
|||
|
|||
#ifndef ST7920_DELAY_1 |
|||
#define ST7920_DELAY_1 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_2 |
|||
#define ST7920_DELAY_2 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_3 |
|||
#define ST7920_DELAY_3 DELAY_NS(125) |
|||
#endif |
|||
@ -0,0 +1,14 @@ |
|||
MEMORY |
|||
{ |
|||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40 |
|||
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K |
|||
} |
|||
|
|||
/* Provide memory region aliases for common.inc */ |
|||
REGION_ALIAS("REGION_TEXT", rom); |
|||
REGION_ALIAS("REGION_DATA", ram); |
|||
REGION_ALIAS("REGION_BSS", ram); |
|||
REGION_ALIAS("REGION_RODATA", rom); |
|||
|
|||
/* Let common.inc handle the real work. */ |
|||
INCLUDE common.inc |
|||
@ -0,0 +1,14 @@ |
|||
MEMORY |
|||
{ |
|||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40 |
|||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K |
|||
} |
|||
|
|||
/* Provide memory region aliases for common.inc */ |
|||
REGION_ALIAS("REGION_TEXT", rom); |
|||
REGION_ALIAS("REGION_DATA", ram); |
|||
REGION_ALIAS("REGION_BSS", ram); |
|||
REGION_ALIAS("REGION_RODATA", rom); |
|||
|
|||
/* Let common.inc handle the real work. */ |
|||
INCLUDE common.inc |
|||
@ -0,0 +1,40 @@ |
|||
import os |
|||
Import("env") |
|||
|
|||
# Relocate firmware from 0x08000000 to 0x08005000 |
|||
for define in env['CPPDEFINES']: |
|||
if define[0] == "VECT_TAB_ADDR": |
|||
env['CPPDEFINES'].remove(define) |
|||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08005000")) |
|||
|
|||
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/mks_robin_lite.ld") |
|||
for i, flag in enumerate(env["LINKFLAGS"]): |
|||
if "-Wl,-T" in flag: |
|||
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script |
|||
elif flag == "-T": |
|||
env["LINKFLAGS"][i + 1] = custom_ld_script |
|||
|
|||
|
|||
# Encrypt ${PROGNAME}.bin and save it as 'mksLite.bin' |
|||
def encrypt(source, target, env): |
|||
import sys |
|||
|
|||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E] |
|||
|
|||
firmware = open(target[0].path, "rb") |
|||
robin = open(target[0].dir.path +'/mksLite3.bin', "wb") |
|||
length = os.path.getsize(target[0].path) |
|||
position = 0 |
|||
try: |
|||
while position < length: |
|||
byte = firmware.read(1) |
|||
if position >= 320 and position < 31040: |
|||
byte = chr(ord(byte) ^ key[position & 31]) |
|||
if sys.version_info[0] > 2: |
|||
byte = bytes(byte, 'latin1') |
|||
robin.write(byte) |
|||
position += 1 |
|||
finally: |
|||
firmware.close() |
|||
robin.close() |
|||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); |
|||
@ -0,0 +1,39 @@ |
|||
import os |
|||
Import("env") |
|||
|
|||
# Relocate firmware from 0x08000000 to 0x08007000 |
|||
for define in env['CPPDEFINES']: |
|||
if define[0] == "VECT_TAB_ADDR": |
|||
env['CPPDEFINES'].remove(define) |
|||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000")) |
|||
|
|||
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/mks_robin_pro.ld") |
|||
for i, flag in enumerate(env["LINKFLAGS"]): |
|||
if "-Wl,-T" in flag: |
|||
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script |
|||
elif flag == "-T": |
|||
env["LINKFLAGS"][i + 1] = custom_ld_script |
|||
|
|||
# Encrypt ${PROGNAME}.bin and save it as 'Robin.bin' |
|||
def encrypt(source, target, env): |
|||
import sys |
|||
|
|||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E] |
|||
|
|||
firmware = open(target[0].path, "rb") |
|||
robin = open(target[0].dir.path +'/Robin_pro.bin', "wb") |
|||
length = os.path.getsize(target[0].path) |
|||
position = 0 |
|||
try: |
|||
while position < length: |
|||
byte = firmware.read(1) |
|||
if position >= 320 and position < 31040: |
|||
byte = chr(ord(byte) ^ key[position & 31]) |
|||
if sys.version_info[0] > 2: |
|||
byte = bytes(byte, 'latin1') |
|||
robin.write(byte) |
|||
position += 1 |
|||
finally: |
|||
firmware.close() |
|||
robin.close() |
|||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); |
|||
File diff suppressed because it is too large
@ -0,0 +1,5 @@ |
|||
1. MKS Robin Lite3 is a powerful 32-bit 3D printer control board with STM32F103RCT6. |
|||
2. Support Marlin2.0. |
|||
3. Support MKS LCD12864B/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. |
|||
4. The main board integrates 5 AXIS interface, BLTOUCH interface, hot bed, 2 heating heads, 3 NTC100K and LCD screen SD card supports firmware update. |
|||
https://www.aliexpress.com/item/4000295949948.html?spm=2114.12010615.8148356.1.596183361yB18D |
|||
File diff suppressed because it is too large
@ -0,0 +1,4 @@ |
|||
1. MKS Robin Pro is a powerful 32-bit 3D printer control board with STM32F103ZET6. |
|||
2. Support Marlin2.0. Support LCD2004/12864 and MKS Robin TFT24/28/32... Screens. |
|||
3. The motherboard integrates 6 AXIS interface, BLTOUCH interface, hot bed, 3 heating heads, 4 NTC100K, 2 MAX31855, integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC |
|||
https://www.aliexpress.com/item/4000444286159.html?spm=2114.12010615.8148356.1.4158721an5TnW9 |
|||
Loading…
Reference in new issue