Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	334341c632	Hephestos config updates (#10960 )	7 years ago
Scott Lahteine	55aedf036b	Fix M503 ABL mesh report. (Zero-based IJ indices)	7 years ago
Scott Lahteine	d8b983f624	More concise M503 output for M906, M913, M914 (#10947 )	7 years ago
Scott Lahteine	ad8d3150aa	Cleanup for dual endstops homing	7 years ago
Eduardo José Tagle	d3c02410a8	[2.0.x] Small assorted collection of fixes and improvements (#10911 ) * Misc fixes and improvements - Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing. Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices. - Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM) - Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps. - Fix dual endstops not properly homing bug (maybe). * Set position immediately when possible	7 years ago
Scott Lahteine	2deff0d9b9	Fix/Improve junction deviation - Respect axis max acceleration limits instead of forcing a fixed acceleration value. - The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.	7 years ago
Scott Lahteine	d259070980	Clean up trailing spaces from vim, etc.	7 years ago
Scott Lahteine	b90f54b0fc	Improve probe logging	7 years ago
Scott Lahteine	4299e5dc8b	Modify E-stepping macros for use in LINEAR_ADVANCE (#10885 )	7 years ago
Scott Lahteine	8f14ef855d	More concise commentary in planner.cpp	7 years ago
Scott Lahteine	6919e87656	Minor cleanup of multi-stepping logic	7 years ago
Scott Lahteine	853a9056ac	Long thermistor tables need special consideration	7 years ago
Scott Lahteine	a4f9c3373f	Tweak thermistor spacing	7 years ago
Scott Lahteine	1ce97f1f6d	Faster (bisect) search in thermistor tables (#10883 )	7 years ago
Scott Lahteine	0ca9db7051	Correct HOTENDS for SWITCHING_EXTRUDER	7 years ago
Eduardo José Tagle	7b9f0302d4	Fix Bresenham rounding errors, add link to article (#10871 )	7 years ago
Scott Lahteine	2566342979	Adjust some commentary	7 years ago
Scott Lahteine	6775a16c97	Fix switching extruder stepping with LA	7 years ago
Scott Lahteine	931ab4ec40	Rename Junction Deviation options	7 years ago
Scott Lahteine	aaaf09bda2	BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION	7 years ago
Scott Lahteine	01d37e00af	Fix up stepper ISR with linear advance timing (#10853 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	7 years ago
Scott Lahteine	7261f48872	Fix reset of endstops and move state	7 years ago
Scott Lahteine	50fa8e01c1	Minor optimization of axis_did_move bits	7 years ago
Scott Lahteine	f28e366b77	Followup for core endstops	7 years ago
Scott Lahteine	9644d56b42	Patches for core motion tests	7 years ago
Scott Lahteine	3e3789da85	Regression: Endstops Core compatibility (#10823 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	7 years ago
Scott Lahteine	4b610b333e	Tweak G38 formatting	7 years ago
Scott Lahteine	d2647c1f19	Fix G1 behaviour after tool unpark Fix #10777 for 2.0.x Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>	7 years ago
Scott Lahteine	0c3773d724	Cleanup in stepper_indirection.h	7 years ago
Scott Lahteine	4b2f6e3b2b	[2.0.x] Add endstop noise filter (#10796 )	7 years ago
Scott Lahteine	65a004564c	Stepper::set_position needed for some applications	7 years ago
Scott Lahteine	435ecb6b67	Followup to stepper/planner refactor	7 years ago
Bob Kuhn	d557c84a71	[2.0.x] Error for FAST_PWM_FAN with 32 bit CPU (#10798 )	7 years ago
etagle	569df3fc0c	Fix interrupt-based endstop detection - Also implemented real endstop reading on interrupt.	7 years ago
etagle	a4af975873	Fix planner block optimization - Fixed the planner incorrectly avoiding optimization of the block following the active one. - Added extra conditions to terminate planner early and avoid redundant computations.	7 years ago
etagle	e0ca627033	Planner block HOLD flag Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.	7 years ago
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner Better encapsulation and considerably reduce stepper jitter	7 years ago
etagle	0566badcef	Add memory barrier, optimal interrupt on-off Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)	7 years ago
Scott Lahteine	7dc03ce721	Simplified fix for babystep pulse width Alternative to the apparently superfluous double delay	7 years ago
Scott Lahteine	65270d6a96	Fix LIN_ADVANCE + SWITCHING_EXTRUDER Followup to #10656	7 years ago
Bob Kuhn	9ad42d6617	add delay between pulse edges (#10778 )	7 years ago
Scott Lahteine	83d42f33e1	Add HAS_HOTEND_OFFSET_Z conditional	7 years ago
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	7 years ago
Giuliano	e1d9046efc	[2.0.x] Temperature reading fix (#10774 )	7 years ago
Scott Lahteine	50270b53a0	Clear up some more compile warnings	7 years ago
Jiri Jaburek	43ddb29f9e	Add FAN_MAX_PWM for M106-controlled fans	7 years ago
Scott Lahteine	836b0bbeee	Fix MBL line_to_destination Fix #10708	7 years ago
Scott Lahteine	ba4c32eec5	Followup to _AXIS patch	7 years ago
Scott Lahteine	d9154ebdf6	Followup to math patch	7 years ago
Scott Lahteine	883b0c9880	Convert custom maths to inlines (#10728 )	7 years ago

... 3 4 5 6 7 ...

690 Commits (8696f882a9517930803cc2bff18c1661bcf770fc)