andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Modify E-stepping macros for use in LINEAR_ADVANCE (#10885)

pull/1/head
Scott Lahteine 6 years ago
committed by GitHub
parent
8f14ef855d
commit
4299e5dc8b
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 57 additions and 168 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 128
      Marlin/src/module/stepper.cpp
  2. 97
      Marlin/src/module/stepper_indirection.h

128
Marlin/src/module/stepper.cpp
View File

@ -259,7 +259,7 @@ volatile int32_t Stepper::endstops_trigsteps[XYZ];
#endif
#if DISABLED(MIXING_EXTRUDER)
#define E_APPLY_STEP(v,Q) E_STEP_WRITE(v)
#define E_APPLY_STEP(v,Q) E_STEP_WRITE(current_block->active_extruder, v)
#endif
/**
@ -315,11 +315,11 @@ void Stepper::set_directions() {
#if DISABLED(LIN_ADVANCE)
if (motor_direction(E_AXIS)) {
REV_E_DIR();
REV_E_DIR(current_block->active_extruder);
count_direction[E_AXIS] = -1;
}
else {
NORM_E_DIR();
NORM_E_DIR(current_block->active_extruder);
count_direction[E_AXIS] = 1;
}
#endif // !LIN_ADVANCE
@ -1423,7 +1423,7 @@ void Stepper::stepper_pulse_phase_isr() {
// Step mixing steppers (proportionally)
counter_m[j] += current_block->steps[E_AXIS];
// Step when the counter goes over zero
if (counter_m[j] >= 0) En_STEP_WRITE(j, !INVERT_E_STEP_PIN);
if (counter_m[j] >= 0) E_STEP_WRITE(j, !INVERT_E_STEP_PIN);
}
#else // !MIXING_EXTRUDER
PULSE_START(E);
@ -1465,7 +1465,7 @@ void Stepper::stepper_pulse_phase_isr() {
MIXING_STEPPERS_LOOP(j) {
if (counter_m[j] >= 0) {
counter_m[j] -= current_block->mix_event_count[j];
En_STEP_WRITE(j, INVERT_E_STEP_PIN);
E_STEP_WRITE(j, INVERT_E_STEP_PIN);
}
}
#else // !MIXING_EXTRUDER
@ -1774,61 +1774,6 @@ uint32_t Stepper::stepper_block_phase_isr() {
uint32_t Stepper::advance_isr() {
uint32_t interval;
#if ENABLED(MK2_MULTIPLEXER) // For SNMM even-numbered steppers are reversed
#define SET_E_STEP_DIR(INDEX) do{ if (e_steps) E0_DIR_WRITE(e_steps < 0 ? !INVERT_E## INDEX ##_DIR ^ TEST(INDEX, 0) : INVERT_E## INDEX ##_DIR ^ TEST(INDEX, 0)); }while(0)
#elif ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
#define SET_E_STEP_DIR(INDEX) do{ if (e_steps) { if (e_steps < 0) REV_E_DIR(); else NORM_E_DIR(); } }while(0)
#elif ENABLED(SWITCHING_EXTRUDER)
#if EXTRUDERS > 4
#define SET_E_STEP_DIR(INDEX) do{ if (e_steps) { switch (INDEX) { \
case 0: case 1: E0_DIR_WRITE(!INVERT_E0_DIR ^ TEST(INDEX, 0) ^ (e_steps < 0)); break; \
case 2: case 3: E1_DIR_WRITE(!INVERT_E1_DIR ^ TEST(INDEX, 0) ^ (e_steps < 0)); break; \
case 4: E2_DIR_WRITE(!INVERT_E2_DIR ^ TEST(INDEX, 0) ^ (e_steps < 0)); \
} } }while(0)
#elif EXTRUDERS > 2
#define SET_E_STEP_DIR(INDEX) do{ if (e_steps) { switch (INDEX) { \
case 0: case 1: E0_DIR_WRITE(!INVERT_E0_DIR ^ TEST(INDEX, 0) ^ (e_steps < 0)); break; \
case 2: case 3: E1_DIR_WRITE(!INVERT_E1_DIR ^ TEST(INDEX, 0) ^ (e_steps < 0)); break; \
} } }while(0)
#else
#define SET_E_STEP_DIR(INDEX) do{ if (e_steps) E0_DIR_WRITE(!INVERT_E0_DIR ^ TEST(INDEX, 0) ^ (e_steps < 0)); }while(0)
#endif
#else
#define SET_E_STEP_DIR(INDEX) do{ if (e_steps) E## INDEX ##_DIR_WRITE(!INVERT_E## INDEX ##_DIR ^ (e_steps < 0)); }while(0)
#endif
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
#define START_E_PULSE(INDEX) do{ if (e_steps) E_STEP_WRITE(!INVERT_E_STEP_PIN); }while(0)
#define STOP_E_PULSE(INDEX) do{ if (e_steps) { e_steps < 0 ? ++e_steps : --e_steps; E_STEP_WRITE(INVERT_E_STEP_PIN); } }while(0)
#elif ENABLED(SWITCHING_EXTRUDER)
#if EXTRUDERS > 4
#define START_E_PULSE(INDEX) do{ if (e_steps) { switch (INDEX) { \
case 0: case 1: E0_STEP_WRITE(!INVERT_E_STEP_PIN); break; \
case 2: case 3: E1_STEP_WRITE(!INVERT_E_STEP_PIN); break; \
case 4: E2_STEP_WRITE(!INVERT_E_STEP_PIN); } \
} }while(0)
#define STOP_E_PULSE(INDEX) do{ if (e_steps) { \
e_steps < 0 ? ++e_steps : --e_steps; \
switch (INDEX) { \
case 0: case 1: E0_STEP_WRITE( INVERT_E_STEP_PIN); break; \
case 2: case 3: E1_STEP_WRITE( INVERT_E_STEP_PIN); break; \
case 4: E2_STEP_WRITE( INVERT_E_STEP_PIN); } \
} }while(0)
#elif EXTRUDERS > 2
#define START_E_PULSE(INDEX) do{ if (e_steps) { if (INDEX < 2) E0_STEP_WRITE(!INVERT_E_STEP_PIN); else E1_STEP_WRITE(!INVERT_E_STEP_PIN); } }while(0)
#define STOP_E_PULSE(INDEX) do{ if (e_steps) { \
e_steps < 0 ? ++e_steps : --e_steps; \
if (INDEX < 2) E0_STEP_WRITE(INVERT_E_STEP_PIN); else E1_STEP_WRITE(INVERT_E_STEP_PIN); \
} }while(0)
#else
#define START_E_PULSE(INDEX) do{ if (e_steps) E0_STEP_WRITE(!INVERT_E_STEP_PIN); }while(0)
#define STOP_E_PULSE(INDEX) do{ if (e_steps) { e_steps < 0 ? ++e_steps : --e_steps; E0_STEP_WRITE(INVERT_E_STEP_PIN); }while(0)
#endif
#else
#define START_E_PULSE(INDEX) do{ if (e_steps) E## INDEX ##_STEP_WRITE(!INVERT_E_STEP_PIN); }while(0)
#define STOP_E_PULSE(INDEX) do { if (e_steps) { e_steps < 0 ? ++e_steps : --e_steps; E## INDEX ##_STEP_WRITE(INVERT_E_STEP_PIN); } }while(0)
#endif
if (use_advance_lead) {
if (step_events_completed > LA_decelerate_after && current_adv_steps > final_adv_steps) {
e_steps--;
@ -1847,21 +1792,10 @@ uint32_t Stepper::stepper_block_phase_isr() {
else
interval = ADV_NEVER;
switch (LA_active_extruder) {
case 0: SET_E_STEP_DIR(0); break;
#if EXTRUDERS > 1
case 1: SET_E_STEP_DIR(1); break;
#if EXTRUDERS > 2
case 2: SET_E_STEP_DIR(2); break;
#if EXTRUDERS > 3
case 3: SET_E_STEP_DIR(3); break;
#if EXTRUDERS > 4
case 4: SET_E_STEP_DIR(4); break;
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
}
if (e_steps >= 0)
NORM_E_DIR(LA_active_extruder);
else
REV_E_DIR(LA_active_extruder);
// Step E stepper if we have steps
while (e_steps) {
@ -1870,21 +1804,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
hal_timer_t pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM);
#endif
switch (LA_active_extruder) {
case 0: START_E_PULSE(0); break;
#if EXTRUDERS > 1
case 1: START_E_PULSE(1); break;
#if EXTRUDERS > 2
case 2: START_E_PULSE(2); break;
#if EXTRUDERS > 3
case 3: START_E_PULSE(3); break;
#if EXTRUDERS > 4
case 4: START_E_PULSE(4); break;
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
}
E_STEP_WRITE(LA_active_extruder, !INVERT_E_STEP_PIN);
// For minimum pulse time wait before stopping pulses
#if EXTRA_CYCLES_E > 20
@ -1894,21 +1814,9 @@ uint32_t Stepper::stepper_block_phase_isr() {
DELAY_NS(EXTRA_CYCLES_E * NANOSECONDS_PER_CYCLE);
#endif
switch (LA_active_extruder) {
case 0: STOP_E_PULSE(0); break;
#if EXTRUDERS > 1
case 1: STOP_E_PULSE(1); break;
#if EXTRUDERS > 2
case 2: STOP_E_PULSE(2); break;
#if EXTRUDERS > 3
case 3: STOP_E_PULSE(3); break;
#if EXTRUDERS > 4
case 4: STOP_E_PULSE(4); break;
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
}
e_steps < 0 ? ++e_steps : --e_steps;
E_STEP_WRITE(LA_active_extruder, INVERT_E_STEP_PIN);
// For minimum pulse time wait before looping
#if EXTRA_CYCLES_E > 20
@ -2061,19 +1969,19 @@ void Stepper::init() {
AXIS_INIT(Z, Z);
#endif
#if HAS_E0_STEP
#if E_STEPPERS > 0 && HAS_E0_STEP
E_AXIS_INIT(0);
#endif
#if HAS_E1_STEP
#if E_STEPPERS > 1 && HAS_E1_STEP
E_AXIS_INIT(1);
#endif
#if HAS_E2_STEP
#if E_STEPPERS > 2 && HAS_E2_STEP
E_AXIS_INIT(2);
#endif
#if HAS_E3_STEP
#if E_STEPPERS > 3 && HAS_E3_STEP
E_AXIS_INIT(3);
#endif
#if HAS_E4_STEP
#if E_STEPPERS > 4 && HAS_E4_STEP
E_AXIS_INIT(4);
#endif

97
Marlin/src/module/stepper_indirection.h
View File

@ -450,73 +450,54 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
/**
* Extruder indirection for the single E axis
*/
#if ENABLED(SWITCHING_EXTRUDER)
#if ENABLED(SWITCHING_EXTRUDER) // One stepper driver per two extruders, reversed on odd index
#if EXTRUDERS > 4
#define E_STEP_WRITE(v) do{ if (current_block->active_extruder < 2) { E0_STEP_WRITE(v); } else if (current_block->active_extruder < 4) { E1_STEP_WRITE(v); } else { E2_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
#define REV_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#elif EXTRUDERS > 3
#define E_STEP_WRITE(v) do{ if (current_block->active_extruder < 2) { E0_STEP_WRITE(v); } else { E1_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#define REV_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#elif EXTRUDERS > 2
#define E_STEP_WRITE(v) do{ if (current_block->active_extruder < 2) { E0_STEP_WRITE(v); } else { E1_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#else
#define E_STEP_WRITE(v) E0_STEP_WRITE(v)
#define NORM_E_DIR() do{ E0_DIR_WRITE(current_block->active_extruder ? INVERT_E0_DIR : !INVERT_E0_DIR); }while(0)
#define REV_E_DIR() do{ E0_DIR_WRITE(current_block->active_extruder ? !INVERT_E0_DIR : INVERT_E0_DIR); }while(0)
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) do{ E0_DIR_WRITE(E ? INVERT_E0_DIR : !INVERT_E0_DIR); }while(0)
#define REV_E_DIR(E) do{ E0_DIR_WRITE(E ? !INVERT_E0_DIR : INVERT_E0_DIR); }while(0)
#endif
#elif ENABLED(MK2_MULTIPLEXER) // Even-numbered steppers are reversed
#define E_STEP_WRITE(v) E0_STEP_WRITE(v)
#define NORM_E_DIR() do{ E0_DIR_WRITE(TEST(current_block->active_extruder, 0) ? !INVERT_E0_DIR: INVERT_E0_DIR); }while(0)
#define REV_E_DIR() do{ E0_DIR_WRITE(TEST(current_block->active_extruder, 0) ? INVERT_E0_DIR: !INVERT_E0_DIR); }while(0)
#elif EXTRUDERS > 4
#define E_STEP_WRITE(v) do{ switch (current_block->active_extruder) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); break; case 4: E4_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
#define REV_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
#elif EXTRUDERS > 3
#define E_STEP_WRITE(v) do{ switch (current_block->active_extruder) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
#define REV_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
#elif EXTRUDERS > 2
#define E_STEP_WRITE(v) do{ switch (current_block->active_extruder) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
#define REV_E_DIR() do{ switch (current_block->active_extruder) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#elif EXTRUDERS > 1
#elif ENABLED(MK2_MULTIPLEXER) // One multiplexed stepper driver, reversed on odd index
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? !INVERT_E0_DIR: INVERT_E0_DIR); }while(0)
#define REV_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? INVERT_E0_DIR: !INVERT_E0_DIR); }while(0)
#elif E_STEPPERS > 4
#define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0)
#elif E_STEPPERS > 3
#define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0)
#elif E_STEPPERS > 2
#define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0)
#define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0)
#elif E_STEPPERS > 1
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
#define E_STEP_WRITE(v) do{ if (extruder_duplication_enabled) { E0_STEP_WRITE(v); E1_STEP_WRITE(v); } else if (current_block->active_extruder == 0) { E0_STEP_WRITE(v); } else { E1_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ if (extruder_duplication_enabled) { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); } else if (current_block->active_extruder == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR() do{ if (extruder_duplication_enabled) { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); } else if (current_block->active_extruder == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { E0_STEP_WRITE(V); E1_STEP_WRITE(V); } else if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); } else if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); } else if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#else
#define E_STEP_WRITE(v) do{ if (current_block->active_extruder == 0) { E0_STEP_WRITE(v); } else { E1_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ if (current_block->active_extruder == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR() do{ if (current_block->active_extruder == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#endif
#elif ENABLED(MIXING_EXTRUDER)
#define E_STEP_WRITE(v) NOOP /* not used for mixing extruders! */
#if MIXING_STEPPERS > 4
#define En_STEP_WRITE(n,v) do{ switch (n) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); break; case 4: E4_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); E2_DIR_WRITE(!INVERT_E2_DIR); E3_DIR_WRITE(!INVERT_E3_DIR); E4_DIR_WRITE(!INVERT_E4_DIR); }while(0)
#define REV_E_DIR() do{ E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); E2_DIR_WRITE( INVERT_E2_DIR); E3_DIR_WRITE( INVERT_E3_DIR); E4_DIR_WRITE( INVERT_E4_DIR); }while(0)
#elif MIXING_STEPPERS > 3
#define En_STEP_WRITE(n,v) do{ switch (n) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); E2_DIR_WRITE(!INVERT_E2_DIR); E3_DIR_WRITE(!INVERT_E3_DIR); }while(0)
#define REV_E_DIR() do{ E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); E2_DIR_WRITE( INVERT_E2_DIR); E3_DIR_WRITE( INVERT_E3_DIR); }while(0)
#elif MIXING_STEPPERS > 2
#define En_STEP_WRITE(n,v) do{ switch (n) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); E2_DIR_WRITE(!INVERT_E2_DIR); }while(0)
#define REV_E_DIR() do{ E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); E2_DIR_WRITE( INVERT_E2_DIR); }while(0)
#else
#define En_STEP_WRITE(n,v) do{ switch (n) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); } }while(0)
#define NORM_E_DIR() do{ E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); }while(0)
#define REV_E_DIR() do{ E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); }while(0)
#define E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0)
#define NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0)
#define REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
#endif
#else
#define E_STEP_WRITE(v) E0_STEP_WRITE(v)
#define NORM_E_DIR() E0_DIR_WRITE(!INVERT_E0_DIR)
#define REV_E_DIR() E0_DIR_WRITE( INVERT_E0_DIR)
#define E_STEP_WRITE(E,V) E0_STEP_WRITE(V)
#define NORM_E_DIR(E) E0_DIR_WRITE(!INVERT_E0_DIR)
#define REV_E_DIR(E) E0_DIR_WRITE( INVERT_E0_DIR)
#endif
#endif // STEPPER_INDIRECTION_H

Write Preview
Loading…
Cancel
Save