Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	7 years ago
Scott Lahteine	c6ff39cc14	Spacing cleanup	7 years ago
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069 ) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	7 years ago
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058 ) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 years ago
Scott Lahteine	79e6d890d5	Add UNKNOWN_Z_NO_RAISE to example configs	7 years ago
Scott Lahteine	a2a672449a	Updated boot screen description	7 years ago
Scott Lahteine	5684beae90	Bring some configs up to speed	7 years ago
Scott Lahteine	2024775e07	Spanish (UTF8) Language (#9786 ) From #7314 by @MrAmericanMike	7 years ago
Scott Lahteine	17d984eab3	Add RESTORE_LEVELING_AFTER_G28 to example configs	7 years ago
Scott Lahteine	7d8c6b3f3c	Add 20x4 option for Sainsmart LCD (#9740 )	7 years ago
Marcio Teixeira	aada1e698f	Removed unused configuration options.	7 years ago
Scott Lahteine	8733d5a296	Add NUM_RUNOUT_SENSORS to example configs	7 years ago
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701 ) Implemented for LPC1768.	7 years ago
Scott Lahteine	79272f98fc	Proposed changes to ST7920 lightweight status screen	7 years ago
Marcio Teixeira	24eb275b99	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	7 years ago
Roxy-3D	21e60fd3ed	Allow user to control Z-Height correction for off mesh movements (#9661 )	7 years ago
Marcio Teixeira	4880ac6533	Added a light-weight status screen for the ST7920 - The status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen. - Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.	7 years ago
Scott Lahteine	2ec65051fd	Fix serial comment sp.	7 years ago
Scott Lahteine	38c7d53bf7	Repair some spacing	7 years ago
Scott Lahteine	b5e92f4f90	[2.0.x] Enable / disable PSU automatically (#9503 )	7 years ago
Scott Lahteine	eecb0188c0	Add ULTI_CONTROLLER to example configs	7 years ago
Scott Lahteine	4925f60cff	Add MALYAN_LCD to configs	7 years ago
Scott Lahteine	7d6c009104	Add thermistor 15 tuned for JGAurora A5	7 years ago
Scott Lahteine	ab8a1a2a0d	Sync gCreate gMax1.5+ config with 1.1.x	7 years ago
Scott Lahteine	348b454401	Probe bounds based on bed size	7 years ago
Roxy-3D	f5f1b069ad	Convert UBL mesh tilting to all use the same algorithm (#9204 ) A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also. The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.	7 years ago
Scott Lahteine	fa432508b0	Followup to Ender config	7 years ago
Scott Lahteine	77c2d810f9	Bring configs up to date	7 years ago
Thomas Moore	dabb75034c	Update example configurations	8 years ago
GMagician	5295b4713d	[2.0.x] add semitec 104NT-4 (#9119 ) Table is very very similar to old 104-GT2 so I added only the name and recycled old ID	7 years ago
Scott Lahteine	0b4a46fa6c	Bring configs up to date with 1.1.x	7 years ago
Thomas Moore	f0a8a1a853	[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866 ) * Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE	7 years ago
Scott Lahteine	28fc8741d6	Reduce default jerk. XY by half. Z by 1/4	7 years ago
Scott Lahteine	1cf1cf8759	Add RADDS_DISPLAY to example configs	7 years ago
Scott Lahteine	f79026acc1	Apply MKS_12864OLED_SSD1306 to examples Followup to #8814	7 years ago
Scott Lahteine	9abbcc3ee0	Apply ZONESTAR_LCD to example configs	7 years ago
Scott Lahteine	69d49a2438	Shorter segments may be better	7 years ago
Roxy-3D	f58eb391aa	[2.0.0] Better off mesh behavior for UBL (#8714 ) * Better off mesh behaviour for UBL * Suggested ubl.h changes	7 years ago
Scott Lahteine	d7800e7975	Apply MULTIPLE_PROBING to example configs	7 years ago
Richard Wackerbarth	c1184552ac	Change K1 to required option PID_K1	7 years ago
Scott Lahteine	aa7efb96bf	Bring configurations up to date	7 years ago
Scott Lahteine	082ab8fcab	Add SKEW_CORRECTION to example configs	7 years ago
Roxy-3D	94e6b2976e	Restore correct G26 values for gMax 1.5+ printer	7 years ago
Scott Lahteine	7c61bcb058	Apply SEGMENT_LEVELED_MOVES to example configs	7 years ago
Scott Lahteine	5926c9c97b	Followup for MESH_EDIT_GFX_OVERLAY	8 years ago
Scott Lahteine	5ce7f23afa	Config option G26_MESH_VALIDATION for all meshes	8 years ago
Scott Lahteine	3f0a982b8c	Move Filament Width Sensor to Configuration_adv.h	8 years ago
Scott Lahteine	b76e173205	Move test extrusion options under G26	8 years ago
Roxy-3D	faaae7a1b2	Provide more clearance for BL-Touch probe	8 years ago
Scott Lahteine	81b91b3f9d	Clean up some trailing white-space	8 years ago

1 2

72 Commits (2f192dbcd683257087d8b4ab402d6219c3ab9004)