Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	14e2b11195	Fix spelling in configs	7 years ago
Scott Lahteine	4685c7d59f	Followup to M91x I patch	7 years ago
Roxy-3D	62fa028155	Handle dual gantry machines better	7 years ago
Roxy-3D	09485f63e9	add missing ')'	7 years ago
Roxy-3D	a35abce1ac	Fix missing ')'	7 years ago
Scott Lahteine	76d4cfb064	Tweak some Max7219 code	7 years ago
Roxy-3D	03b01e2500	Folger Tech i3-2020 now defaults to 2 Max7219 units	7 years ago
Roxy-3D	db85ca93c4	Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's	7 years ago
Roxy-3D	9660996cc3	Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285 ) * Add Multi Unit Support for Max7219 to bugfix_2.0.0 * Apply multi-MAX7219 to example configs * Tweak some spacing, macros	7 years ago
Scott Lahteine	39c8aed8ba	Add MANUAL_PROBE_START_Z to example configs	7 years ago
Scott Lahteine	2106fa26b1	Add MANUAL_PROBE_START_Z for manual probing	7 years ago
Scott Lahteine	17ed0f815c	Fix tool_change call in UBL G29 Fix #11279, #11252	7 years ago
Scott Lahteine	63a146d424	planner.synchronize at start of tool_change See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498	7 years ago
Scott Lahteine	665ac1e4d0	Add POWER_LOSS_PIN support	7 years ago
Scott Lahteine	2243f72523	Add POWER_LOSS_PIN to example configs	7 years ago
Chris Pepper	47d5fcbbcc	[2.0.x] Change MKS SBASE default serial port to avoid confusion (#11301 )	7 years ago
Scott Lahteine	64f007580b	Fix some header comments	7 years ago
Giuliano	aed1d17a2d	Initialize default units (#11295 ) When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.	7 years ago
Scott Lahteine	8c40f0c6c7	Reduce TQ message code size	7 years ago
xC0000005	b04e0c0cbb	Malyan LCD feedrate, better temp handling.	7 years ago
Scott Lahteine	065e9c3d66	Add card.longest_filename method	7 years ago
Roxy-3D	71df1f7f57	Don't display M421 information for UBL at startup It takes too long to display the mesh data for large mesh's at startup. We should consider ways to speed this up. Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?	7 years ago
Giuliano	8f686aa449	[2.0.x] Fix change filament crash (#11269 ) Prevent crash, on filament change, when printer is not homed	7 years ago
teemuatlut	f38c81cdde	LPC176x: Expand HW SPI class	7 years ago
teemuatlut	3b5dec4b13	Add new LPC include folder	7 years ago
Scott Lahteine	e486326910	Vellemann K8400 Y bed size is 180 Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>	7 years ago
Giuliano	e5ea9d200f	[2.0.x] fix kill printer (#11260 ) This will fix kill message on dual printer with 0 alignment offset	7 years ago
Jamie Bainbridge	8c57cadbe7	Include stdlib in fontutils (#11251 ) When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`. However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error. Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error. Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>	7 years ago
Scott Lahteine	bf7d0ba859	Assert that XY probe offsets are integers	7 years ago
Scott Lahteine	12854f1909	Add Z_CLEARANCE_MULTI_PROBE to example configs Co-Authored-By: nightgryphon <ngryph@gmail.com>	7 years ago
Scott Lahteine	25e2ca8896	Add Z_CLEARANCE_MULTI_PROBE Co-Authored-By: nightgryphon <ngryph@gmail.com>	7 years ago
Scott Lahteine	fd8a76493b	Unify M91x parameter I meaning, simplify reports (#11249 )	7 years ago
Scott Lahteine	566d05006d	report_state > event_handler Make the endstop report method track endstop changes on its own.	7 years ago
Scott Lahteine	6b521b6df2	Loosen thermistor table size limit Co-Authored-By: Aaron Griffith <aargri@gmail.com>	7 years ago
Roxy-3D	603e136e87	Resolve issue where user can't edit UBL's mesh	7 years ago
Alexander Amelkin	ed720194d2	[2.0.x][HD44780] Remove unused include The <binary.h> header is not available in STM32 toolchain and is not used anywhere in ultralcd_common_HD44780.h. If it is used anywhere in HD44780 support for other platforms, it must be included in the corresponding .cpp file directly and put under appropriate conditional compilation directives for the platform requiring it. As I was unable to find such code, I consider the file unused and hence remove the inclusion.	7 years ago
Scott Lahteine	d05e832f29	Add STM32F1 support for SD-based EEPROM	7 years ago
Scott Lahteine	63f4c9bdb9	Followup to float maths patch	7 years ago
Scott Lahteine	2992112da0	Optimize delta kinematics Co-Authored-By: ejtagle <ejtagle@hotmail.com>	7 years ago
etagle	1367df2875	Replace double with float, optimize calculation	7 years ago
Scott Lahteine	d960d448fa	Optimize calculations with LROUND	7 years ago
Scott Lahteine	68e6650df7	Remove Quake Fast Inverse SQRT (it isn't faster)	7 years ago
etagle	e7e896e7d7	More tweaks to fastio_Due.h	7 years ago
Chris Pepper	55f4744e54	[LPC176x] Endstop Interrupts Feature (#11202 ) Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.	7 years ago
Chris Pepper	5abf5bc8a7	[LPC176x] Fix Interrupt forward declarations (#11200 )	7 years ago
Chris Pepper	cbea385ed7	[2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198 ) * Fix LCD_LANGUAGE options list formatting in config * Remove 'cn' language option from list	7 years ago
Scott Lahteine	5379c115c8	Fix Trigorilla include typo	7 years ago
Scott Lahteine	9c058091e9	No M914 or SGT set for non-sensorless axes	7 years ago
Scott Lahteine	c7ec6c68e7	Patch SCARA config to match 1.1.x	7 years ago
Scott Lahteine	480a3d3d0c	Apply sensorless homing requirements only for specified axes	7 years ago

1 2 3 4 5 ...

8938 Commits (14e2b111957a7f84e3264b677ee0c375959303a7)