midopple
17aa67e4ea
If the option DISABLE_INACTIVE_EXTRUDER ist active the extruder switch to early to inactive because there are some moves in the buffer. So the planner wait 32 moves to disable the unused extruder.
10 years ago
Dim3nsioneer
8a32c5395b
renaming the disable inactive extruder feature
10 years ago
Dim3nsioneer
29e7639933
Add switch unused feeder(s) off
Having the non-active feeder motors powered on all the time is not
necessary. A feature to deactivate the unused feeder motors has been
implemented. The feature is enabled on default but can be switched off
in the configuration.
10 years ago
whosawhatsis
856edfcc0d
Fixed math
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
11 years ago
whosawhatsis
d24df7af2c
M200 implementation
11 years ago
Erik van der Zalm
8349fc89a4
Fixed planner bug
11 years ago
fsantini
b64661070e
Fixed the plane vector equation to a simpler one (only dependent on the normal)
Removed the calculation of the inverse matrix since the rotation matrix is orthogonal, therefore inverted == transposed.
Much simpler and mathematically robust.
11 years ago
Alex Borro
253dfc4bc1
Bed Auto Leveling feature
Check the Readme for instruction how to enable and configure the feature
11 years ago
Erik van der Zalm
ff6fa09ecf
Moved corexy implementation from stepper to planner
(Thanks iquizzle)
11 years ago
Erik van der Zalm
c8dcc7c208
Allow increasing the software PWM frequency.
11 years ago
Scott Lahteine
5dabc95409
Apply all changes from latest Marlin_V1
Diffed and merged, preserving my updates
11 years ago
Erik van der Zalm
971ec35135
Expanded M302 to allow setting the temp
11 years ago
Robert F-C
40eb07bad4
Revert and extend previous change pin check change
Reviert previous change of #if BLAH_PIN > 0 to #if defined(BLAH_PIN) &&
BLAH_PIN > -1. Unfortunately some times pin 0 is used. For my sins I've
gone through and replaced all unsafe checks of #if BLAH_PIN > -1 with
the safe version.
11 years ago
Erik van der Zalm
6c45c3f4e7
BariCUDA changes
11 years ago
Erik van der Zalm
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
11 years ago
Jordan Miller
37f3199df3
fixed problems in planner with solenoids for BariCUDA when set to 0
11 years ago
Jordan Miller
fbd899a37d
Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129.
11 years ago
midopple
a65a26d6b4
If CORE_XY is in use X and Y Axis had to be activated at the same time
11 years ago
Simon Oliver
93f0463b21
Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values
Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset).
Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read.
Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks.
Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk.
Conflicts:
Marlin/language.h
12 years ago
daid303
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
12 years ago
Kevin O'Connor
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
12 years ago
Kevin O'Connor
3f2f94ef28
Be consistent in setting of the fan PWM.
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
12 years ago
Erik vd Zalm
6752cb2d9c
PID now per extruder. Fixed typo
12 years ago
Erik vd Zalm
0ac452e252
Disable is now multi extruder compatible. M84 got a T option.
12 years ago
oni303
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
12 years ago
daid303
6a9bee27cc
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
12 years ago
daid303
94ea26ff46
Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.
12 years ago
Erik vd Zalm
b98fb17fe9
Small FREQUENCY_LIMIT changes
12 years ago
daid303
8f20562f49
Fix some of the crowded code style. And fixed the conditional. #300
12 years ago
daid303
72586eb30a
Solved few warnings.
12 years ago
daid303
06b58a9c4f
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
12 years ago
stohn
de0448343f
added KILL_PIN support / cleaned up manage_inactivity function definition
12 years ago
Erik van der Zalm
b67dacdc8f
Fixed AD595 define
12 years ago
Erik van der Zalm
ba96059203
add additional dropsegments test
12 years ago
zittix
fbd91ab0b5
Fixes #153 for bad call to abs()
12 years ago
Erik de Bruijn
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
Turning off the protection might be beneficial to those who want to do fast and long reversals.
12 years ago
Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
13 years ago
Erik van der Zalm
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
13 years ago
Erik van der Zalm
61e09e6be2
Added FAN_PIN -1 checks
13 years ago
Erik van der Zalm
116dc86b8a
Fixed type in e-jerk
13 years ago
Erik van der Zalm
e056bf8081
Added E-Jerk
13 years ago
Erik van der Zalm
aac7aa3bf0
Queued fan control. Issue #90
13 years ago
Blair Thompson
046a8e0039
Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.
13 years ago
Daid
88d289caa1
Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.
13 years ago
Erik van der Zalm
b48d67ce10
Fixed homing
13 years ago
Erik van der Zalm
018c567abf
Moved SLOWDOWN function. (jetty840)
Included AD595 calibration options. (daid)
13 years ago
Erik van der Zalm
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
Split ramps1.3 in Sprinter like config and multiextruder config.
13 years ago
Erik van der Zalm
5aa9c41ab1
Changed comment mode for detection.
Added M221 extuder multiply factor.
13 years ago
Erik van der Zalm
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
Updated the Xsteps ... settings via the LCD menu
13 years ago
Erik van der Zalm
a0a1f81913
various changes
13 years ago