andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

pull/1/head
daid303 12 years ago
parent
539f3b3fe4
commit
06b58a9c4f
14 changed files with 2159 additions and 2134 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 17
      Marlin/Configuration_adv.h
  2. 8
      Marlin/EEPROMwrite.h
  3. 3
      Marlin/LiquidCrystalRus.cpp
  4. 23
      Marlin/Marlin.h
  5. 1839
      Marlin/Marlin.pde
  6. 1865
      Marlin/Marlin_main.cpp
  7. 13
      Marlin/SdFile.cpp
  8. 3
      Marlin/planner.cpp
  9. 18
      Marlin/temperature.cpp
  10. 296
      Marlin/ultralcd.cpp
  11. 76
      Marlin/ultralcd.h
  12. 54
      Marlin/watchdog.cpp
  13. 15
      Marlin/watchdog.h
  14. 63
      Marlin/watchdog.pde

17
Marlin/Configuration_adv.h
View File

@ -181,15 +181,14 @@
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // no z because of layer shift.
// The hardware watchdog should halt the Microcontroller, in case the firmware gets stuck somewhere. However:
// the Watchdog is not working well, so please only enable this for testing
// this enables the watchdog interrupt.
//#define USE_WATCHDOG
//#ifdef USE_WATCHDOG
// you cannot reboot on a mega2560 due to a bug in he bootloader. Hence, you have to reset manually, and this is done hereby:
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
#define USE_WATCHDOG
#ifdef USE_WATCHDOG
// you cannot watchdog reboot on Arduino mega2560 due to a bug in he bootloader. Hence we need to ask the user to reset.
// THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
//#define RESET_MANUAL
//#define WATCHDOG_TIMEOUT 4 //seconds
//#endif
#endif
// extruder advance constant (s2/mm3)
//
@ -214,7 +213,7 @@
#define MM_PER_ARC_SEGMENT 1
#define N_ARC_CORRECTION 25
const int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT

8
Marlin/EEPROMwrite.h
View File

@ -6,14 +6,6 @@
#include "temperature.h"
//#include <EEPROM.h>
int plaPreheatHotendTemp;
int plaPreheatHPBTemp;
int plaPreheatFanSpeed;
int absPreheatHotendTemp;
int absPreheatHPBTemp;
int absPreheatFanSpeed;
template <class T> int EEPROM_writeAnything(int &ee, const T& value)
{
const byte* p = (const byte*)(const void*)&value;

3
Marlin/LiquidCrystalRus.cpp
View File

@ -1,4 +1,3 @@
#define __PROG_TYPES_COMPAT__
#include "LiquidCrystalRus.h"
#include <stdio.h>
@ -14,7 +13,7 @@
// it is a russian alphabet translation
// except 0401 --> 0xa2 = ╗, 0451 --> 0xb5
const PROGMEM prog_uchar utf_recode[] =
const PROGMEM uint8_t utf_recode[] =
{ 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,
0xa8,0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1,
0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f,

23
Marlin/Marlin.h
View File

@ -17,8 +17,8 @@
#include <util/delay.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#include "fastio.h"
@ -52,22 +52,11 @@
#define MYSERIAL MSerial
#endif
//this is a unfinsihed attemp to removes a lot of warning messages, see:
// http://www.avrfreaks.net/index.php?name=PNphpBB2&file=printview&t=57011
//typedef char prog_char PROGMEM;
// //#define PSTR (s ) ((const PROGMEM char *)(s))
// //# define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];}))
// //#define MYPGM(s) ((const prog_char *g PROGMEM=s))
#define MYPGM(s) PSTR(s)
//#define MYPGM(s) (__extension__({static char __c[] __attribute__((__progmem__)) = (s); &__c[0];})) //This is the normal behaviour
//#define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];})) //this does not work but hides the warnings
#define SERIAL_PROTOCOL(x) MYSERIAL.print(x);
#define SERIAL_PROTOCOL_F(x,y) MYSERIAL.print(x,y);
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(MYPGM(x));
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x));
#define SERIAL_PROTOCOLLN(x) {MYSERIAL.print(x);MYSERIAL.write('\n');}
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(MYPGM(x));MYSERIAL.write('\n');}
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(PSTR(x));MYSERIAL.write('\n');}
const char errormagic[] PROGMEM ="Error:";
@ -92,7 +81,6 @@ void serial_echopair_P(const char *s_P, unsigned long v);
//things to write to serial from Programmemory. saves 400 to 2k of RAM.
#define SerialprintPGM(x) serialprintPGM(MYPGM(x))
FORCE_INLINE void serialprintPGM(const char *str)
{
char ch=pgm_read_byte(str);
@ -197,6 +185,9 @@ extern float min_pos[3];
extern float max_pos[3];
extern unsigned char FanSpeed;
extern unsigned long starttime;
extern unsigned long stoptime;
// Handling multiple extruders pins
extern uint8_t active_extruder;

1839
Marlin/Marlin.pde
View File

File diff suppressed because it is too large

1865
Marlin/Marlin_main.cpp
View File

File diff suppressed because it is too large

13
Marlin/SdFile.cpp
View File

@ -55,13 +55,16 @@ int16_t SdFile::write(const void* buf, uint16_t nbyte) {
* Use writeError to check for errors.
*/
#if ARDUINO >= 100
size_t SdFile::write(uint8_t b)
size_t SdFile::write(uint8_t b)
{
return SdBaseFile::write(&b, 1);
}
#else
void SdFile::write(uint8_t b)
#endif
void SdFile::write(uint8_t b)
{
SdBaseFile::write(&b, 1);
SdBaseFile::write(&b, 1);
}
#endif
//------------------------------------------------------------------------------
/** Write a string to a file. Used by the Arduino Print class.
* \param[in] str Pointer to the string.
@ -89,4 +92,4 @@ void SdFile::writeln_P(PGM_P str) {
}
#endif
#endif

3
Marlin/planner.cpp
View File

@ -191,8 +191,7 @@ void calculate_trapezoid_for_block(block_t *block, float entry_factor, float exi
// have to use intersection_distance() to calculate when to abort acceleration and start braking
// in order to reach the final_rate exactly at the end of this block.
if (plateau_steps < 0) {
accelerate_steps = ceil(
intersection_distance(block->initial_rate, block->final_rate, acceleration, block->step_event_count));
accelerate_steps = ceil(intersection_distance(block->initial_rate, block->final_rate, acceleration, block->step_event_count));
accelerate_steps = max(accelerate_steps,0); // Check limits due to numerical round-off
accelerate_steps = min(accelerate_steps,block->step_event_count);
plateau_steps = 0;

18
Marlin/temperature.cpp
View File

@ -145,20 +145,20 @@ static volatile bool temp_meas_ready = false;
void PID_autotune(float temp, int extruder, int ncycles)
{
float input;
float input = 0.0;
int cycles=0;
bool heating = true;
unsigned long temp_millis = millis();
unsigned long t1=temp_millis;
unsigned long t2=temp_millis;
long t_high;
long t_low;
long t_high = 0;
long t_low = 0;
long bias, d;
float Ku, Tu;
float Kp, Ki, Kd;
float max, min;
float max = 0, min = 10000;
if ((extruder > EXTRUDERS)
#if (TEMP_BED_PIN <= -1)
@ -315,17 +315,15 @@ int getHeaterPower(int heater) {
void manage_heater()
{
#ifdef USE_WATCHDOG
wd_reset();
#endif
float pid_input;
float pid_output;
if(temp_meas_ready != true) //better readability
return;
//Reset the watchdog after we know we have a temperature measurement.
watchdog_reset();
CRITICAL_SECTION_START;
temp_meas_ready = false;
CRITICAL_SECTION_END;
@ -548,7 +546,6 @@ int temp2analogBed(int celsius) {
#elif defined BED_USES_AD595
return lround(((celsius-TEMP_SENSOR_AD595_OFFSET)/TEMP_SENSOR_AD595_GAIN) * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) );
#else
#warning No heater-type defined for the bed.
return 0;
#endif
}
@ -625,7 +622,6 @@ float analog2tempBed(int raw) {
#elif defined BED_USES_AD595
return ((raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR) * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET;
#else
#warning No heater-type defined for the bed.
return 0;
#endif
}

296
Marlin/ultralcd.pde → Marlin/ultralcd.cpp
View File

@ -6,11 +6,7 @@
#include "language.h"
#include "temperature.h"
#include "EEPROMwrite.h"
#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#else
#include <LiquidCrystal.h>
#endif
//===========================================================================
//=============================imported variables============================
//===========================================================================
@ -33,6 +29,14 @@ volatile char buttons=0; //the last checked buttons in a bit array.
long encoderpos=0;
short lastenc=0;
//TODO: This should be in a preferences file.
int plaPreheatHotendTemp;
int plaPreheatHPBTemp;
int plaPreheatFanSpeed;
int absPreheatHotendTemp;
int absPreheatHPBTemp;
int absPreheatFanSpeed;
//===========================================================================
//=============================private variables============================
@ -42,11 +46,7 @@ static char messagetext[LCD_WIDTH]="";
//return for string conversion routines
static char conv[8];
#if LANGUAGE_CHOICE == 6
LiquidCrystalRus lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#else
LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
static unsigned long previous_millis_lcd=0;
//static long previous_millis_buttons=0;
@ -70,7 +70,7 @@ void lcdProgMemprint(const char *str)
ch=pgm_read_byte(++str);
}
}
#define lcdprintPGM(x) lcdProgMemprint(MYPGM(x))
#define LCD_PRINT_PGM(x) lcdProgMemprint(PSTR(x))
//===========================================================================
@ -366,11 +366,11 @@ void MainMenu::showStatus()
{
encoderpos=feedmultiply;
clear();
lcd.setCursor(0,0);lcdprintPGM("\002000/000\001 ");
lcd.setCursor(0,0);LCD_PRINT_PGM("\002000/000\001 ");
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
lcd.setCursor(10,0);lcdprintPGM("B000/000\001 ");
lcd.setCursor(10,0);LCD_PRINT_PGM("B000/000\001 ");
#elif EXTRUDERS > 1
lcd.setCursor(10,0);lcdprintPGM("\002000/000\001 ");
lcd.setCursor(10,0);LCD_PRINT_PGM("\002000/000\001 ");
#endif
}
@ -432,7 +432,7 @@ void MainMenu::showStatus()
if(starttime!=oldtime)
{
lcd.print(itostr2(time/60));lcdprintPGM("h ");lcd.print(itostr2(time%60));lcdprintPGM("m");
lcd.print(itostr2(time/60));LCD_PRINT_PGM("h ");lcd.print(itostr2(time%60));LCD_PRINT_PGM("m");
oldtime=time;
}
}
@ -441,7 +441,7 @@ void MainMenu::showStatus()
if((currentz!=oldzpos)||force_lcd_update)
{
lcd.setCursor(10,1);
lcdprintPGM("Z:");lcd.print(ftostr52(current_position[2]));
LCD_PRINT_PGM("Z:");lcd.print(ftostr52(current_position[2]));
oldzpos=currentz;
}
@ -468,7 +468,7 @@ void MainMenu::showStatus()
{
oldfeedmultiply=curfeedmultiply;
lcd.setCursor(0,2);
lcd.print(itostr3(curfeedmultiply));lcdprintPGM("% ");
lcd.print(itostr3(curfeedmultiply));LCD_PRINT_PGM("% ");
}
if(messagetext[0]!='\0')
@ -487,7 +487,7 @@ void MainMenu::showStatus()
{
lcd.setCursor(10,2);
lcd.print(itostr3((int)percent));
lcdprintPGM("%SD");
LCD_PRINT_PGM("%SD");
}
#endif
#else //smaller LCDS----------------------------------
@ -496,7 +496,7 @@ void MainMenu::showStatus()
if(force_lcd_update) //initial display of content
{
encoderpos=feedmultiply;
lcd.setCursor(0,0);lcdprintPGM("\002---/---\001 ");
lcd.setCursor(0,0);LCD_PRINT_PGM("\002---/---\001 ");
}
int tHotEnd0=intround(degHotend0());
@ -550,26 +550,26 @@ void MainMenu::showPrepare()
switch(i)
{
case ItemP_exit:
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemP_autostart:
MENUITEM( lcdprintPGM(MSG_AUTOSTART) , BLOCK;
MENUITEM( LCD_PRINT_PGM(MSG_AUTOSTART) , BLOCK;
#ifdef SDSUPPORT
card.lastnr=0;card.setroot();card.checkautostart(true);
#endif
beepshort(); ) ;
break;
case ItemP_disstep:
MENUITEM( lcdprintPGM(MSG_DISABLE_STEPPERS) , BLOCK;enquecommand("M84");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_DISABLE_STEPPERS) , BLOCK;enquecommand("M84");beepshort(); ) ;
break;
case ItemP_home:
MENUITEM( lcdprintPGM(MSG_AUTO_HOME) , BLOCK;enquecommand("G28");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_AUTO_HOME) , BLOCK;enquecommand("G28");beepshort(); ) ;
break;
case ItemP_origin:
MENUITEM( lcdprintPGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_SET_ORIGIN) , BLOCK;enquecommand("G92 X0 Y0 Z0");beepshort(); ) ;
break;
case ItemP_preheat_pla:
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA) , BLOCK;setTargetHotend0(plaPreheatHotendTemp);setTargetBed(plaPreheatHPBTemp);
#if FAN_PIN > -1
FanSpeed = plaPreheatFanSpeed;
analogWrite(FAN_PIN, FanSpeed);
@ -577,7 +577,7 @@ void MainMenu::showPrepare()
beepshort(); );
break;
case ItemP_preheat_abs:
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp);
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS) , BLOCK;setTargetHotend0(absPreheatHotendTemp);setTargetBed(absPreheatHPBTemp);
#if FAN_PIN > -1
FanSpeed = absPreheatFanSpeed;
analogWrite(FAN_PIN, FanSpeed);
@ -585,13 +585,13 @@ void MainMenu::showPrepare()
beepshort(); );
break;
case ItemP_cooldown:
MENUITEM( lcdprintPGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_COOLDOWN) , BLOCK;setTargetHotend0(0);setTargetHotend1(0);setTargetHotend2(0);setTargetBed(0);beepshort(); ) ;
break;
// case ItemP_extrude:
// MENUITEM( lcdprintPGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
// MENUITEM( LCD_PRINT_PGM(" Extrude") , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E50");beepshort(); ) ;
// break;
case ItemP_move:
MENUITEM( lcdprintPGM(MSG_MOVE_AXIS) , BLOCK;status=Sub_PrepareMove;beepshort(); );
MENUITEM( LCD_PRINT_PGM(MSG_MOVE_AXIS) , BLOCK;status=Sub_PrepareMove;beepshort(); );
break;
default:
break;
@ -617,14 +617,14 @@ void MainMenu::showAxisMove()
switch(i)
{
case ItemAM_exit:
MENUITEM( lcdprintPGM(MSG_PREPARE_ALT) , BLOCK;status=Main_Prepare;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_PREPARE_ALT) , BLOCK;status=Main_Prepare;beepshort(); ) ;
break;
case ItemAM_X:
{
//oldencoderpos=0;
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" X:");
lcd.setCursor(0,line);LCD_PRINT_PGM(" X:");
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[X_AXIS]));
}
@ -669,7 +669,7 @@ void MainMenu::showAxisMove()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Y:");
lcd.setCursor(0,line);LCD_PRINT_PGM(" Y:");
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Y_AXIS]));
}
@ -714,7 +714,7 @@ void MainMenu::showAxisMove()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Z:");
lcd.setCursor(0,line);LCD_PRINT_PGM(" Z:");
lcd.setCursor(11,line);lcd.print(ftostr52(current_position[Z_AXIS]));
}
@ -757,11 +757,11 @@ void MainMenu::showAxisMove()
break;
case ItemAM_E:
// ErikDB: TODO: this length should be changed for volumetric.
MENUITEM( lcdprintPGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F70 E1");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F70 E1");beepshort(); ) ;
break;
case ItemAM_ERetract:
// ErikDB: TODO: this length should be changed for volumetric.
MENUITEM( lcdprintPGM(MSG_RETRACT) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E-1");beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_RETRACT) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E-1");beepshort(); ) ;
break;
default:
break;
@ -787,13 +787,13 @@ void MainMenu::showTune()
switch(i)
{
case ItemT_exit:
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemT_speed:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_SPEED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(feedmultiply));
}
@ -828,7 +828,7 @@ void MainMenu::showTune()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
}
@ -862,7 +862,7 @@ void MainMenu::showTune()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
}
@ -898,7 +898,7 @@ void MainMenu::showTune()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
}
@ -933,7 +933,7 @@ void MainMenu::showTune()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FLOW);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FLOW);
lcd.setCursor(13,line);lcd.print(ftostr52(axis_steps_per_unit[E_AXIS]));
}
@ -975,22 +975,22 @@ void MainMenu::showTune()
updateActiveLines(ItemT_fan,encoderpos);
}
//does not work
// #define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \
// {\
// if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
// if(activeline==line) \
// { \
// if(CLICKED) \
// { \
// linechanging=!linechanging; \
// if(linechanging) {enter_action;} \
// else {accept_action;} \
// } \
// else \
// if(linechanging) {change_action};}\
// }
//
/*does not work
#define MENUCHANGEITEM(repaint_action, enter_action, accept_action, change_action) \
{\
if(force_lcd_update) { lcd.setCursor(0,line); repaint_action; } \
if(activeline==line) \
{ \
if(CLICKED) \
{ \
linechanging=!linechanging; \
if(linechanging) {enter_action;} \
else {accept_action;} \
} \
else \
if(linechanging) {change_action};}\
}
*/
enum {
ItemCT_exit,ItemCT_nozzle0,
@ -1022,13 +1022,13 @@ void MainMenu::showControlTemp()
switch(i)
{
case ItemCT_exit:
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
break;
case ItemCT_nozzle0:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend0())));
}
@ -1063,7 +1063,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE1);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE1);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend1())));
}
@ -1099,7 +1099,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE2);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE2);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetHotend2())));
}
@ -1135,7 +1135,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_MIN);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_MIN);
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_min));
}
@ -1169,7 +1169,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_MAX);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_MAX);
lcd.setCursor(13,line);lcd.print(ftostr3(autotemp_max));
}
@ -1203,7 +1203,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FACTOR);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FACTOR);
lcd.setCursor(13,line);lcd.print(ftostr32(autotemp_factor));
}
@ -1237,12 +1237,12 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_AUTOTEMP);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_AUTOTEMP);
lcd.setCursor(13,line);
if(autotemp_enabled)
lcdprintPGM(MSG_ON);
LCD_PRINT_PGM(MSG_ON);
else
lcdprintPGM(MSG_OFF);
LCD_PRINT_PGM(MSG_OFF);
}
if((activeline!=line) )
@ -1253,9 +1253,9 @@ void MainMenu::showControlTemp()
autotemp_enabled=!autotemp_enabled;
lcd.setCursor(13,line);
if(autotemp_enabled)
lcdprintPGM(MSG_ON);
LCD_PRINT_PGM(MSG_ON);
else
lcdprintPGM(MSG_OFF);
LCD_PRINT_PGM(MSG_OFF);
BLOCK;
}
@ -1266,7 +1266,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degTargetBed())));
}
@ -1300,7 +1300,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(FanSpeed));
}
@ -1336,7 +1336,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" PID-P: ");
lcd.setCursor(0,line);LCD_PRINT_PGM(" PID-P: ");
lcd.setCursor(13,line);lcd.print(itostr4(Kp));
}
@ -1371,7 +1371,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_I);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_PID_I);
lcd.setCursor(13,line);lcd.print(ftostr51(Ki/PID_dT));
}
@ -1406,7 +1406,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_D);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_PID_D);
lcd.setCursor(13,line);lcd.print(itostr4(Kd*PID_dT));
}
@ -1443,7 +1443,7 @@ void MainMenu::showControlTemp()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_PID_C);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_PID_C);
lcd.setCursor(13,line);lcd.print(itostr3(Kc));
}
@ -1478,10 +1478,10 @@ void MainMenu::showControlTemp()
#endif
break;
case ItemCT_PLA_PreHeat_Setting:
MENUITEM( lcdprintPGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_PLA_SETTINGS) , BLOCK;status=Sub_PreheatPLASettings;beepshort(); ) ;
break;
case ItemCT_ABS_PreHeat_Setting:
MENUITEM( lcdprintPGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_PREHEAT_ABS_SETTINGS) , BLOCK;status=Sub_PreheatABSSettings;beepshort(); ) ;
break;
default:
break;
@ -1513,14 +1513,14 @@ void MainMenu::showControlMotion()
switch(i)
{
case ItemCM_exit:
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
break;
case ItemCM_acc:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_ACC);
lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcdprintPGM("00");
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_ACC);
lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));LCD_PRINT_PGM("00");
}
if((activeline!=line) )
@ -1545,7 +1545,7 @@ void MainMenu::showControlMotion()
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));LCD_PRINT_PGM("00");
}
}break;
@ -1553,7 +1553,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_VXY_JERK);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VXY_JERK);
lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk));
}
@ -1592,11 +1592,11 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_VMAX);
if(i==ItemCM_vmaxx)lcdprintPGM(MSG_X);
if(i==ItemCM_vmaxy)lcdprintPGM(MSG_Y);
if(i==ItemCM_vmaxz)lcdprintPGM(MSG_Z);
if(i==ItemCM_vmaxe)lcdprintPGM(MSG_E);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VMAX);
if(i==ItemCM_vmaxx)LCD_PRINT_PGM(MSG_X);
if(i==ItemCM_vmaxy)LCD_PRINT_PGM(MSG_Y);
if(i==ItemCM_vmaxz)LCD_PRINT_PGM(MSG_Z);
if(i==ItemCM_vmaxe)LCD_PRINT_PGM(MSG_E);
lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemCM_vmaxx]));
}
@ -1632,7 +1632,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_VMIN);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VMIN);
lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate));
}
@ -1667,7 +1667,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_VTRAV_MIN);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_VTRAV_MIN);
lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate));
}
@ -1706,12 +1706,12 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(" Amax ");
if(i==ItemCM_amaxx)lcdprintPGM(MSG_X);
if(i==ItemCM_amaxy)lcdprintPGM(MSG_Y);
if(i==ItemCM_amaxz)lcdprintPGM(MSG_Z);
if(i==ItemCM_amaxe)lcdprintPGM(MSG_E);
lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));lcdprintPGM("00");
lcd.setCursor(0,line);LCD_PRINT_PGM(" Amax ");
if(i==ItemCM_amaxx)LCD_PRINT_PGM(MSG_X);
if(i==ItemCM_amaxy)LCD_PRINT_PGM(MSG_Y);
if(i==ItemCM_amaxz)LCD_PRINT_PGM(MSG_Z);
if(i==ItemCM_amaxe)LCD_PRINT_PGM(MSG_E);
lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100));LCD_PRINT_PGM("00");
}
if((activeline!=line) )
@ -1736,7 +1736,7 @@ void MainMenu::showControlMotion()
{
if(encoderpos<1) encoderpos=1;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));LCD_PRINT_PGM("00");
}
}break;
@ -1746,8 +1746,8 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_A_RETRACT);
lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00");
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_A_RETRACT);
lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));LCD_PRINT_PGM("00");
}
if((activeline!=line) )
@ -1773,7 +1773,7 @@ void MainMenu::showControlMotion()
{
if(encoderpos<10) encoderpos=10;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00");
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));LCD_PRINT_PGM("00");
}
}break;
@ -1781,7 +1781,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_XSTEPS);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_XSTEPS);
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[X_AXIS]));
}
@ -1818,7 +1818,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_YSTEPS);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_YSTEPS);
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[Y_AXIS]));
}
@ -1856,7 +1856,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_ZSTEPS);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_ZSTEPS);
lcd.setCursor(11,line);lcd.print(ftostr51(axis_steps_per_unit[Z_AXIS]));
}
@ -1895,7 +1895,7 @@ void MainMenu::showControlMotion()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_ESTEPS);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_ESTEPS);
lcd.setCursor(11,line);lcd.print(ftostr51(axis_steps_per_unit[E_AXIS]));
}
@ -1958,7 +1958,7 @@ void MainMenu::showControlRetract()
switch(i)
{
case ItemR_exit:
MENUITEM( lcdprintPGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL) , BLOCK;status=Main_Control;beepshort(); ) ;
break;
//float retract_length=2, retract_feedrate=1200, retract_zlift=0.4;
@ -1967,12 +1967,12 @@ void MainMenu::showControlRetract()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_AUTORETRACT);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_AUTORETRACT);
lcd.setCursor(13,line);
if(autoretract_enabled)
lcdprintPGM(MSG_ON);
LCD_PRINT_PGM(MSG_ON);
else
lcdprintPGM(MSG_OFF);
LCD_PRINT_PGM(MSG_OFF);
}
if((activeline!=line) )
@ -1983,9 +1983,9 @@ void MainMenu::showControlRetract()
autoretract_enabled=!autoretract_enabled;
lcd.setCursor(13,line);
if(autoretract_enabled)
lcdprintPGM(MSG_ON);
LCD_PRINT_PGM(MSG_ON);
else
lcdprintPGM(MSG_OFF);
LCD_PRINT_PGM(MSG_OFF);
BLOCK;
}
@ -1995,7 +1995,7 @@ void MainMenu::showControlRetract()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT);
lcd.setCursor(13,line);lcd.print(ftostr52(retract_length));
}
@ -2030,7 +2030,7 @@ void MainMenu::showControlRetract()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACTF);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACTF);
lcd.setCursor(13,line);lcd.print(itostr4(retract_feedrate));
}
@ -2065,7 +2065,7 @@ void MainMenu::showControlRetract()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_ZLIFT);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT_ZLIFT);
lcd.setCursor(13,line);lcd.print(ftostr52(retract_zlift));;
}
@ -2100,7 +2100,7 @@ void MainMenu::showControlRetract()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_RECOVER);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT_RECOVER);
lcd.setCursor(13,line);lcd.print(ftostr52(retract_recover_length));;
}
@ -2136,7 +2136,7 @@ void MainMenu::showControlRetract()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_CONTROL_RETRACT_RECOVERF);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_CONTROL_RETRACT_RECOVERF);
lcd.setCursor(13,line);lcd.print(itostr4(retract_recover_feedrate));
}
@ -2196,24 +2196,24 @@ void MainMenu::showControl()
switch(i)
{
case ItemC_exit:
MENUITEM( lcdprintPGM(MSG_MAIN_WIDE) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN_WIDE) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
case ItemC_temp:
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_WIDE) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_WIDE) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemC_move:
MENUITEM( lcdprintPGM(MSG_MOTION_WIDE) , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MOTION_WIDE) , BLOCK;status=Sub_MotionControl;beepshort(); ) ;
break;
#ifdef FWRETRACT
case ItemC_rectract:
MENUITEM( lcdprintPGM(MSG_RECTRACT_WIDE) , BLOCK;status=Sub_RetractControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_RECTRACT_WIDE) , BLOCK;status=Sub_RetractControl;beepshort(); ) ;
break;
#endif
case ItemC_store:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
{
@ -2227,7 +2227,7 @@ void MainMenu::showControl()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_LOAD_EPROM);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_LOAD_EPROM);
}
if((activeline==line) && CLICKED)
{
@ -2241,7 +2241,7 @@ void MainMenu::showControl()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_RESTORE_FAILSAFE);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_RESTORE_FAILSAFE);
}
if((activeline==line) && CLICKED)
{
@ -2288,7 +2288,7 @@ void MainMenu::showSD()
switch(i)
{
case 0:
MENUITEM( lcdprintPGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_MAIN) , BLOCK;status=Main_Menu;beepshort(); ) ;
break;
// case 1:
// {
@ -2301,11 +2301,11 @@ void MainMenu::showSD()
// if(true)
// #endif
// {
// lcdprintPGM(" \004Refresh");
// LCD_PRINT_PGM(" \004Refresh");
// }
// else
// {
// lcdprintPGM(" \004Insert Card");
// LCD_PRINT_PGM(" \004Insert Card");
// }
//
// }
@ -2320,7 +2320,7 @@ void MainMenu::showSD()
// }break;
case 1:
MENUITEM( lcd.print(" ");card.getWorkDirName();
if(card.filename[0]=='/') lcdprintPGM(MSG_REFRESH);
if(card.filename[0]=='/') LCD_PRINT_PGM(MSG_REFRESH);
else {
lcd.print("\005");
lcd.print(card.filename);
@ -2343,8 +2343,12 @@ void MainMenu::showSD()
{
card.getfilename(i-FIRSTITEM);
//Serial.print("Filenr:");Serial.println(i-2);
lcd.setCursor(0,line);lcdprintPGM(" ");
if(card.filenameIsDir) lcd.print("\005");
lcd.setCursor(0,line);LCD_PRINT_PGM(" ");
if(card.filenameIsDir)
{
lcd.print("\005");
card.longFilename[LCD_WIDTH-2] = '\0';
}
if (card.longFilename[0])
{
card.longFilename[LCD_WIDTH-1] = '\0';
@ -2436,14 +2440,14 @@ void MainMenu::showMainMenu()
switch(i)
{
case ItemM_watch:
MENUITEM( lcdprintPGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
break;
case ItemM_prepare:
MENUITEM( if(!tune) lcdprintPGM(MSG_PREPARE);else lcdprintPGM(MSG_TUNE); , BLOCK;status=Main_Prepare;beepshort(); ) ;
MENUITEM( if(!tune) LCD_PRINT_PGM(MSG_PREPARE);else LCD_PRINT_PGM(MSG_TUNE); , BLOCK;status=Main_Prepare;beepshort(); ) ;
break;
case ItemM_control:
MENUITEM( lcdprintPGM(MSG_CONTROL_ARROW) , BLOCK;status=Main_Control;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_CONTROL_ARROW) , BLOCK;status=Main_Control;beepshort(); ) ;
break;
#ifdef SDSUPPORT
case ItemM_file:
@ -2458,13 +2462,13 @@ void MainMenu::showMainMenu()
#endif
{
if(card.sdprinting)
lcdprintPGM(MSG_STOP_PRINT);
LCD_PRINT_PGM(MSG_STOP_PRINT);
else
lcdprintPGM(MSG_CARD_MENU);
LCD_PRINT_PGM(MSG_CARD_MENU);
}
else
{
lcdprintPGM(MSG_NO_CARD);
LCD_PRINT_PGM(MSG_NO_CARD);
}
}
#ifdef CARDINSERTED
@ -2490,13 +2494,13 @@ void MainMenu::showMainMenu()
#endif
{
if(card.sdprinting)
lcdprintPGM(MSG_PAUSE_PRINT);
LCD_PRINT_PGM(MSG_PAUSE_PRINT);
else
lcdprintPGM(MSG_RESUME_PRINT);
LCD_PRINT_PGM(MSG_RESUME_PRINT);
}
else
{
//lcdprintPGM(MSG_NO_CARD);
//LCD_PRINT_PGM(MSG_NO_CARD);
}
}
#ifdef CARDINSERTED
@ -2666,14 +2670,14 @@ void MainMenu::showPLAsettings()
{
case ItemPLAPreHeat_Exit:
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemPLAPreHeat_set_PLA_FanSpeed:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatFanSpeed));
}
@ -2707,7 +2711,7 @@ void MainMenu::showPLAsettings()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHotendTemp));
}
@ -2741,7 +2745,7 @@ void MainMenu::showPLAsettings()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(plaPreheatHPBTemp));
}
@ -2774,7 +2778,7 @@ void MainMenu::showPLAsettings()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
{
@ -2812,14 +2816,14 @@ void MainMenu::showABSsettings()
{
case ItemABSPreHeat_Exit:
MENUITEM( lcdprintPGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
MENUITEM( LCD_PRINT_PGM(MSG_TEMPERATURE_RTN) , BLOCK;status=Sub_TempControl;beepshort(); ) ;
break;
case ItemABSPreHeat_set_FanSpeed:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FAN_SPEED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_FAN_SPEED);
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatFanSpeed));
}
@ -2853,7 +2857,7 @@ void MainMenu::showABSsettings()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_NOZZLE);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_NOZZLE);
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHotendTemp));
}
@ -2887,7 +2891,7 @@ void MainMenu::showABSsettings()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_BED);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_BED);
lcd.setCursor(13,line);lcd.print(ftostr3(absPreheatHPBTemp));
}
@ -2920,7 +2924,7 @@ void MainMenu::showABSsettings()
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_STORE_EPROM);
lcd.setCursor(0,line);LCD_PRINT_PGM(MSG_STORE_EPROM);
}
if((activeline==line) && CLICKED)
{

76
Marlin/ultralcd.h
View File

@ -1,46 +1,41 @@
#ifndef ULTRALCD_H
#define ULTRALCD_H
#include "Marlin.h"
#ifdef ULTRA_LCD
#include "language.h"
#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
#include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal
#endif
void lcd_status();
void lcd_init();
void lcd_status(const char* message);
void beep();
void buttons_init();
void buttons_check();
#define LCD_UPDATE_INTERVAL 100
#define STATUSTIMEOUT 15000
#if LANGUAGE_CHOICE == 6
extern LiquidCrystalRus lcd;
#else
extern LiquidCrystal lcd;
#endif
extern volatile char buttons; //the last checked buttons in a bit array.
void lcd_status();
void lcd_init();
void lcd_status(const char* message);
void beep();
void buttons_init();
void buttons_check();
#define LCD_UPDATE_INTERVAL 100
#define STATUSTIMEOUT 15000
extern LCD_CLASS lcd;
extern volatile char buttons; //the last checked buttons in a bit array.
#ifdef NEWPANEL
#ifdef NEWPANEL
#define EN_C (1<<BLEN_C)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define CLICKED (buttons&EN_C)
#define BLOCK {blocking=millis()+blocktime;}
#if (SDCARDDETECT > -1)
#ifdef SDCARDDETECTINVERTED
#define CARDINSERTED (READ(SDCARDDETECT)!=0)
#else
#define CARDINSERTED (READ(SDCARDDETECT)==0)
#endif
#endif //SDCARDTETECTINVERTED
#else
#else
//atomatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
@ -53,9 +48,18 @@
#define CLICKED ((buttons&B_MI)||(buttons&B_ST))
#define BLOCK {blocking[BL_MI]=millis()+blocktime;blocking[BL_ST]=millis()+blocktime;}
#endif
#endif
#if (SDCARDDETECT > -1)
#ifdef SDCARDDETECTINVERTED
#define CARDINSERTED (READ(SDCARDDETECT)!=0)
#else
#define CARDINSERTED (READ(SDCARDDETECT)==0)
#endif //SDCARDTETECTINVERTED
#else
//If we don't have a card detect line, aways asume the card is inserted
#define CARDINSERTED true
#endif
// blocking time for recognizing a new keypress of one key, ms
@ -152,8 +156,8 @@
#define LCD_INIT lcd_init();
#define LCD_MESSAGE(x) lcd_status(x);
#define LCD_MESSAGEPGM(x) lcd_statuspgm(MYPGM(x));
#define LCD_ALERTMESSAGEPGM(x) lcd_alertstatuspgm(MYPGM(x));
#define LCD_MESSAGEPGM(x) lcd_statuspgm(PSTR(x));
#define LCD_ALERTMESSAGEPGM(x) lcd_alertstatuspgm(PSTR(x));
#define LCD_STATUS lcd_status()
#else //no lcd
#define LCD_INIT
@ -178,4 +182,14 @@ char *itostr31(const int &xx);
char *itostr3(const int &xx);
char *itostr4(const int &xx);
char *ftostr51(const float &x);
//TODO: These do not belong here.
extern int plaPreheatHotendTemp;
extern int plaPreheatHPBTemp;
extern int plaPreheatFanSpeed;
extern int absPreheatHotendTemp;
extern int absPreheatHPBTemp;
extern int absPreheatFanSpeed;
#endif //ULTRALCD

54
Marlin/watchdog.cpp
View File

@ -0,0 +1,54 @@
#include "Marlin.h"
#ifdef USE_WATCHDOG
#include "watchdog.h"
#include "ultralcd.h"
//===========================================================================
//=============================private variables ============================
//===========================================================================
//===========================================================================
//=============================functinos ============================
//===========================================================================
/// intialise watch dog with a 1 sec interrupt time
void watchdog_init()
{
#ifdef RESET_MANUAL
//We enable the watchdog timer, but only for the interrupt.
//Take care, as this requires the correct order of operation, with interrupts disabled. See the datasheet of any AVR chip for details.
wdt_reset();
_WD_CONTROL_REG = _BV(_WD_CHANGE_BIT) | _BV(WDE);
_WD_CONTROL_REG = _BV(WDIE) | WDTO_1S;
#else
wdt_enable(WDTO_1S);
#endif
}
/// reset watchdog. MUST be called every 1s after init or avr will reset.
void watchdog_reset()
{
wdt_reset();
}
//===========================================================================
//=============================ISR ============================
//===========================================================================
//Watchdog timer interrupt, called if main program blocks >1sec and manual reset is enabled.
#ifdef RESET_MANUAL
ISR(WDT_vect)
{
LCD_MESSAGEPGM("ERR:Please Reset");//16 characters so it fits on a 16x2 display
LCD_STATUS;
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Something is wrong, please turn off the printer.");
kill(); //kill blocks
while(1); //wait for user or serial reset
}
#endif//RESET_MANUAL
#endif//USE_WATCHDOG

15
Marlin/watchdog.h
View File

@ -1,16 +1,17 @@
#ifndef WATCHDOG_H
#define WATCHDOG_H
#include "Marlin.h"
#ifdef USE_WATCHDOG
#ifdef USE_WATCHDOG
// intialise watch dog with a 1 sec interrupt time
void wd_init();
// pad the dog/reset watchdog. MUST be called at least every second after the first wd_init or avr will go into emergency procedures..
void wd_reset();
void watchdog_init();
// pad the dog/reset watchdog. MUST be called at least every second after the first watchdog_init or avr will go into emergency procedures..
void watchdog_reset();
#else
FORCE_INLINE void wd_init() {};
FORCE_INLINE void wd_reset() {};
//If we do not have a watchdog, then we can have empty functions which are optimized away.
FORCE_INLINE void watchdog_init() {};
FORCE_INLINE void watchdog_reset() {};
#endif
#endif

63
Marlin/watchdog.pde
View File

@ -1,63 +0,0 @@
#ifdef USE_WATCHDOG
#include "Marlin.h"
#include "watchdog.h"
//===========================================================================
//=============================private variables ============================
//===========================================================================
static volatile uint8_t timeout_seconds=0;
void(* ctrlaltdelete) (void) = 0; //does not work on my atmega2560
//===========================================================================
//=============================functinos ============================
//===========================================================================
/// intialise watch dog with a 1 sec interrupt time
void wd_init()
{
WDTCSR |= (1<<WDCE )|(1<<WDE ); //allow changes
WDTCSR = (1<<WDCE )|(1<<WDE )|(1<<WDP3 )|(1<<WDP0); // Reset after 8 sec.
// WDTCSR = (1<<WDIF)|(1<<WDIE)| (1<<WDCE )|(1<<WDE )| (1<<WDP3) | (1<<WDP0);
}
/// reset watchdog. MUST be called every 1s after init or avr will reset.
void wd_reset()
{
wdt_reset();
}
//===========================================================================
//=============================ISR ============================
//===========================================================================
//Watchdog timer interrupt, called if main program blocks >1sec
ISR(WDT_vect)
{
if(timeout_seconds++ >= WATCHDOG_TIMEOUT)
{
#ifdef RESET_MANUAL
LCD_MESSAGEPGM("Please Reset!");
LCD_STATUS;
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Something is wrong, please turn off the printer.");
#else
LCD_MESSAGEPGM("Timeout, resetting!");
LCD_STATUS;
#endif
//disable watchdog, it will survife reboot.
WDTCSR |= (1<<WDCE) | (1<<WDE);
WDTCSR = 0;
#ifdef RESET_MANUAL
kill(); //kill blocks
while(1); //wait for user or serial reset
#else
ctrlaltdelete();
#endif
}
}
#endif /* USE_WATCHDOG */
Write Preview
Loading…
Cancel
Save