9a515cbd32
Fix Pause Print message and behavior ( #13394 )
6 years ago
f5bcc00570
Unify debugging output with debug_out.h ( #13388 )
6 years ago
00fc43144a
Follow up fixes to various PRs. ( #13334 )
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
6 years ago
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
6 years ago
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
6 years ago
71773b128d
Fix stepper use before init. Add Ultimaker2+ Extended clone config ( #13284 )
6 years ago
2616e4d4d9
Remove duplicated 'chitchat' defines ( #13258 )
6 years ago
808b076000
Update some ABL/UBL conditionals
6 years ago
e15354e387
Simplify serial port redirect ( #13234 )
6 years ago
3c9a7926c2
Fix compile error with JUNCTION_DEVIATION
See #13000
6 years ago
0feeef2604
Update copyright in headers
6 years ago
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
6 years ago
4200bd2fc1
Report on M92 with no arguments ( #12833 )
6 years ago
d4d1b28a06
Fix some include paths
6 years ago
4fa1c52688
Tweak serial output code
6 years ago
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
6 years ago
19fea772e5
Use E_AXIS_N where it makes sense
6 years ago
371d9a1acf
Fix line-endings, formatting, whitespace
Followup to #12770
6 years ago
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
6 years ago
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
6 years ago
e8bda62d2a
Followup to servo angles patch
Fix #12594
6 years ago
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES ( #12559 )
6 years ago
c986239837
A single SERIAL_ECHO macro type ( #12557 )
6 years ago
22d7fed60a
Fix compile error with SD_FIRMWARE_UPDATE ( #12462 )
6 years ago
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
6 years ago
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 years ago
ef724edd80
Apply HAS_LCD_MENU in EEPROM code
6 years ago
6471a75a22
Combine more tool-change variables ( #12137 )
7 years ago
c04cf127f7
Fix EEPROM servo angles init, section grouping
7 years ago
d1ff22b983
Revive SCARA's home offset (unimplemented)
7 years ago
31c28d0dd2
Drop pgm_read_*_near and let headers choose ( #12301 )
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
7 years ago
946cf8b453
EEPROM read code grouping
7 years ago
d015f746cc
Fix some compile warnings ( #12220 )
7 years ago
d801f85963
Correct EEPROM read/write disparities. ( #12169 )
7 years ago
b641571098
Replace types.h with millis_t.h
7 years ago
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
7 years ago
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
7 years ago
a40458405a
Fix datasize error when FWRETRACT is disabled ( #12086 )
7 years ago
951b25163e
Extend M217 with configurable park/raise ( #12076 )
7 years ago
e8d2cf4fb5
EEPROM followup (tmc_stepper_current_t)
7 years ago
d332fcb8fa
Fix firmware-retract compile errors ( #12061 )
7 years ago
d556dc1865
Fix and improve EEPROM storage ( #12054 )
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
7 years ago
9b5c1a5e77
Fix EEPROM checksum bug
Addressing #12048
7 years ago
cf5284cdf2
Add SD Firmware Update capability ( #12043 )
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
7 years ago
74cd6cb4fc
Single nozzle filament change ( #11994 )
7 years ago
d6b0fbd771
Use uint8_t for all fan speeds ( #12032 )
7 years ago
e8d677620c
Use NUM_SERVOS in EEPROM code
Fix #12015
7 years ago
c40ea1f0fd
Update EEPROM_VERSION
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
7 years ago
1358bd9319
Make MAX_EXTRUDERS always 6
7 years ago
c3229e1b34
Migrate to a new TMC library ( #11943 )
7 years ago
Scott Lahteine
Marcio Teixeira
3dlabsio
Vasily Evseenko
Giuliano Zaro
Scott Lahteine
Rolf Werum
teemuatlut
Ludy
InsanityAutomation
Roman Moravčík
Karl Andersson