andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311)

pull/1/head
Scott Lahteine 6 years ago
committed by GitHub
parent
4771e372a1
commit
cfdb38eda4
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
30 changed files with 478 additions and 615 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 3
      Marlin/src/Marlin.cpp
  2. 28
      Marlin/src/core/minmax.h
  3. 3
      Marlin/src/core/serial.cpp
  4. 91
      Marlin/src/core/serial.h
  5. 58
      Marlin/src/feature/I2CPositionEncoder.cpp
  6. 20
      Marlin/src/feature/I2CPositionEncoder.h
  7. 21
      Marlin/src/feature/bedlevel/abl/abl.cpp
  8. 3
      Marlin/src/feature/bedlevel/ubl/ubl.cpp
  9. 14
      Marlin/src/feature/bedlevel/ubl/ubl.h
  10. 33
      Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
  11. 13
      Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
  12. 15
      Marlin/src/feature/dac/stepper_dac.cpp
  13. 20
      Marlin/src/feature/fwretract.cpp
  14. 12
      Marlin/src/feature/mixing.cpp
  15. 19
      Marlin/src/feature/mixing.h
  16. 11
      Marlin/src/feature/pause.cpp
  17. 6
      Marlin/src/feature/power_loss_recovery.cpp
  18. 9
      Marlin/src/feature/prusa_MMU2/mmu2.cpp
  19. 4
      Marlin/src/feature/twibus.cpp
  20. 7
      Marlin/src/gcode/bedlevel/G26.cpp
  21. 49
      Marlin/src/gcode/parser.cpp
  22. 3
      Marlin/src/gcode/parser.h
  23. 17
      Marlin/src/gcode/queue.cpp
  24. 414
      Marlin/src/module/configuration_store.cpp
  25. 41
      Marlin/src/module/printcounter.cpp
  26. 37
      Marlin/src/module/probe.cpp
  27. 33
      Marlin/src/module/scara.cpp
  28. 63
      Marlin/src/module/temperature.cpp
  29. 8
      Marlin/src/module/tool_change.cpp
  30. 38
      Marlin/src/sd/cardreader.cpp

3
Marlin/src/Marlin.cpp
View File

@ -910,8 +910,7 @@ void setup() {
#endif
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory());
SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
SERIAL_ECHOLNPAIR(MSG_FREE_MEMORY, freeMemory(), MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t) * (BLOCK_BUFFER_SIZE));
queue_setup();

28
Marlin/src/core/minmax.h
View File

@ -23,6 +23,10 @@
#undef MIN
#undef MAX
// Pass NUM_ARGS(__VA_ARGS__) to use the number of arguments
#define _NUM_ARGS(_0,_24_,_23,_22,_21,_20,_19,_18,_17,_16,_15,_14,_13,_12,_11,_10,_9,_8,_7,_6,_5,_4,_3,_2,_1,N,...) N
#define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0)
#ifdef __cplusplus
#ifndef _MINMAX_H_
@ -46,26 +50,30 @@
#else
// NUM_ARGS(...) evaluates to the number of arguments
#define _NUM_ARGS(X,X6,X5,X4,X3,X2,X1,N,...) N
#define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,6,5,4,3,2,1,0)
#define MIN_2(a,b) ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a < _b ? _a : _b;})
#define MIN_2(a,b) ((a)<(b)?(a):(b))
#define MIN_3(a,...) MIN_2(a,MIN_2(__VA_ARGS__))
#define MIN_4(a,...) MIN_2(a,MIN_3(__VA_ARGS__))
#define MIN_5(a,...) MIN_2(a,MIN_4(__VA_ARGS__))
#define MIN_6(a,...) MIN_2(a,MIN_5(__VA_ARGS__))
#define __MIN_N(N, ...) MIN_ ## N(__VA_ARGS__)
#define _MIN_N(N, ...) __MIN_N(N, __VA_ARGS__)
#define MIN_7(a,...) MIN_2(a,MIN_6(__VA_ARGS__))
#define MIN_8(a,...) MIN_2(a,MIN_7(__VA_ARGS__))
#define MIN_9(a,...) MIN_2(a,MIN_8(__VA_ARGS__))
#define MIN_10(a,...) MIN_2(a,MIN_9(__VA_ARGS__))
#define __MIN_N(N, ...) MIN_##N(__VA_ARGS__)
#define _MIN_N(N, ...) __MIN_N(N,__VA_ARGS__)
#define MIN(...) _MIN_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__)
#define MAX_2(a,b) ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a > _b ? _a : _b;})
#define MAX_2(a,b) ((a)>(b)?(a):(b))
#define MAX_3(a,...) MAX_2(a,MAX_2(__VA_ARGS__))
#define MAX_4(a,...) MAX_2(a,MAX_3(__VA_ARGS__))
#define MAX_5(a,...) MAX_2(a,MAX_4(__VA_ARGS__))
#define MAX_6(a,...) MAX_2(a,MAX_5(__VA_ARGS__))
#define __MAX_N(N, ...) MAX_ ## N(__VA_ARGS__)
#define _MAX_N(N, ...) __MAX_N(N, __VA_ARGS__)
#define MAX_7(a,...) MAX_2(a,MAX_6(__VA_ARGS__))
#define MAX_8(a,...) MAX_2(a,MAX_7(__VA_ARGS__))
#define MAX_9(a,...) MAX_2(a,MAX_8(__VA_ARGS__))
#define MAX_10(a,...) MAX_2(a,MAX_9(__VA_ARGS__))
#define __MAX_N(N, ...) MAX_##N(__VA_ARGS__)
#define _MAX_N(N, ...) __MAX_N(N,__VA_ARGS__)
#define MAX(...) _MAX_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__)
#endif

3
Marlin/src/core/serial.cpp
View File

@ -69,8 +69,7 @@ void print_bin(const uint16_t val) {
serialprintPGM(prefix);
SERIAL_CHAR('(');
SERIAL_ECHO(x);
SERIAL_ECHOPAIR(", ", y);
SERIAL_ECHOPAIR(", ", z);
SERIAL_ECHOPAIR(", ", y, ", ", z);
SERIAL_CHAR(')');
if (suffix) serialprintPGM(suffix); else SERIAL_EOL();
}

91
Marlin/src/core/serial.h
View File

@ -22,6 +22,7 @@
#pragma once
#include "../inc/MarlinConfigPre.h"
#include "../core/minmax.h"
#include HAL_PATH(../HAL, HAL.h)
/**
@ -62,7 +63,7 @@ extern uint8_t marlin_debug_flags;
#define SERIAL_CHAR(x) SERIAL_OUT(write, x)
#define SERIAL_ECHO(x) SERIAL_OUT(print, x)
#define SERIAL_ECHO_F(x,y) SERIAL_OUT(print, x, y)
#define SERIAL_ECHO_F(...) SERIAL_OUT(print, __VA_ARGS__)
#define SERIAL_ECHOLN(x) SERIAL_OUT(println, x)
#define SERIAL_PRINT(x,b) SERIAL_OUT(print, x, b)
#define SERIAL_PRINTLN(x,b) SERIAL_OUT(println, x, b)
@ -75,22 +76,78 @@ extern uint8_t marlin_debug_flags;
#define SERIAL_FLUSHTX()
#endif
#define SERIAL_ECHOPGM(x) (serialprintPGM(PSTR(x)))
#define SERIAL_ECHOLNPGM(x) (serialprintPGM(PSTR(x "\n")))
#define SERIAL_ECHOPAIR(pre, value) (serial_echopair_PGM(PSTR(pre), value))
#define SERIAL_ECHOLNPAIR(pre, value) do{ SERIAL_ECHOPAIR(pre, value); SERIAL_EOL(); }while(0)
#define SERIAL_ECHOPAIR_F(pre, value, y) do{ SERIAL_ECHO(pre); SERIAL_ECHO_F(value, y); }while(0)
#define SERIAL_ECHOLNPAIR_F(pre, value, y) do{ SERIAL_ECHOPAIR_F(pre, value, y); SERIAL_EOL(); }while(0)
#define SERIAL_ECHO_START() serial_echo_start()
#define SERIAL_ERROR_START() serial_error_start()
#define SERIAL_EOL() SERIAL_CHAR('\n')
#define SERIAL_ECHO_MSG(STR) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define SERIAL_ERROR_MSG(STR) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define SERIAL_ECHO_SP(C) serial_spaces(C)
// Print up to 12 pairs of values
#define __SEP_N(N,...) _SEP_##N(__VA_ARGS__)
#define _SEP_N(N,...) __SEP_N(N,__VA_ARGS__)
#define _SEP_2(PRE,V) serial_echopair_PGM(PSTR(PRE),V)
#define _SEP_3(a,b,ETC) do{ _SEP_2(a,b); SERIAL_ECHOPGM(ETC); }while(0)
#define _SEP_4(a,b,...) do{ _SEP_2(a,b); _SEP_2(__VA_ARGS__); }while(0)
#define _SEP_5(a,b,...) do{ _SEP_2(a,b); _SEP_3(__VA_ARGS__); }while(0)
#define _SEP_6(a,b,...) do{ _SEP_2(a,b); _SEP_4(__VA_ARGS__); }while(0)
#define _SEP_7(a,b,...) do{ _SEP_2(a,b); _SEP_5(__VA_ARGS__); }while(0)
#define _SEP_8(a,b,...) do{ _SEP_2(a,b); _SEP_6(__VA_ARGS__); }while(0)
#define _SEP_9(a,b,...) do{ _SEP_2(a,b); _SEP_7(__VA_ARGS__); }while(0)
#define _SEP_10(a,b,...) do{ _SEP_2(a,b); _SEP_8(__VA_ARGS__); }while(0)
#define _SEP_11(a,b,...) do{ _SEP_2(a,b); _SEP_9(__VA_ARGS__); }while(0)
#define _SEP_12(a,b,...) do{ _SEP_2(a,b); _SEP_10(__VA_ARGS__); }while(0)
#define _SEP_13(a,b,...) do{ _SEP_2(a,b); _SEP_11(__VA_ARGS__); }while(0)
#define _SEP_14(a,b,...) do{ _SEP_2(a,b); _SEP_12(__VA_ARGS__); }while(0)
#define _SEP_15(a,b,...) do{ _SEP_2(a,b); _SEP_13(__VA_ARGS__); }while(0)
#define _SEP_16(a,b,...) do{ _SEP_2(a,b); _SEP_14(__VA_ARGS__); }while(0)
#define _SEP_17(a,b,...) do{ _SEP_2(a,b); _SEP_15(__VA_ARGS__); }while(0)
#define _SEP_18(a,b,...) do{ _SEP_2(a,b); _SEP_16(__VA_ARGS__); }while(0)
#define _SEP_19(a,b,...) do{ _SEP_2(a,b); _SEP_17(__VA_ARGS__); }while(0)
#define _SEP_20(a,b,...) do{ _SEP_2(a,b); _SEP_18(__VA_ARGS__); }while(0)
#define _SEP_21(a,b,...) do{ _SEP_2(a,b); _SEP_19(__VA_ARGS__); }while(0)
#define _SEP_22(a,b,...) do{ _SEP_2(a,b); _SEP_20(__VA_ARGS__); }while(0)
#define _SEP_23(a,b,...) do{ _SEP_2(a,b); _SEP_21(__VA_ARGS__); }while(0)
#define _SEP_24(a,b,...) do{ _SEP_2(a,b); _SEP_22(__VA_ARGS__); }while(0)
#define SERIAL_ECHOPAIR(...) _SEP_N(NUM_ARGS(__VA_ARGS__),__VA_ARGS__)
// Print up to 12 pairs of values followed by newline
#define __SELP_N(N,...) _SELP_##N(__VA_ARGS__)
#define _SELP_N(N,...) __SELP_N(N,__VA_ARGS__)
#define _SELP_2(PRE,V) do{ serial_echopair_PGM(PSTR(PRE),V); SERIAL_EOL(); }while(0)
#define _SELP_3(PRE,V,ETC) do{ serial_echopair_PGM(PSTR(PRE),V); SERIAL_ECHOLNPGM(ETC); }while(0)
#define _SELP_4(a,b,...) do{ _SELP_2(a,b); _SELP_2(__VA_ARGS__); }while(0)
#define _SELP_5(a,b,...) do{ _SELP_2(a,b); _SELP_3(__VA_ARGS__); }while(0)
#define _SELP_6(a,b,...) do{ _SELP_2(a,b); _SELP_4(__VA_ARGS__); }while(0)
#define _SELP_7(a,b,...) do{ _SELP_2(a,b); _SELP_5(__VA_ARGS__); }while(0)
#define _SELP_8(a,b,...) do{ _SELP_2(a,b); _SELP_6(__VA_ARGS__); }while(0)
#define _SELP_9(a,b,...) do{ _SELP_2(a,b); _SELP_7(__VA_ARGS__); }while(0)
#define _SELP_10(a,b,...) do{ _SELP_2(a,b); _SELP_8(__VA_ARGS__); }while(0)
#define _SELP_11(a,b,...) do{ _SELP_2(a,b); _SELP_9(__VA_ARGS__); }while(0)
#define _SELP_12(a,b,...) do{ _SELP_2(a,b); _SELP_10(__VA_ARGS__); }while(0)
#define _SELP_13(a,b,...) do{ _SELP_2(a,b); _SELP_11(__VA_ARGS__); }while(0)
#define _SELP_14(a,b,...) do{ _SELP_2(a,b); _SELP_12(__VA_ARGS__); }while(0)
#define _SELP_15(a,b,...) do{ _SELP_2(a,b); _SELP_13(__VA_ARGS__); }while(0)
#define _SELP_16(a,b,...) do{ _SELP_2(a,b); _SELP_14(__VA_ARGS__); }while(0)
#define _SELP_17(a,b,...) do{ _SELP_2(a,b); _SELP_15(__VA_ARGS__); }while(0)
#define _SELP_18(a,b,...) do{ _SELP_2(a,b); _SELP_16(__VA_ARGS__); }while(0)
#define _SELP_19(a,b,...) do{ _SELP_2(a,b); _SELP_17(__VA_ARGS__); }while(0)
#define _SELP_20(a,b,...) do{ _SELP_2(a,b); _SELP_18(__VA_ARGS__); }while(0)
#define _SELP_21(a,b,...) do{ _SELP_2(a,b); _SELP_19(__VA_ARGS__); }while(0)
#define _SELP_22(a,b,...) do{ _SELP_2(a,b); _SELP_20(__VA_ARGS__); }while(0)
#define _SELP_23(a,b,...) do{ _SELP_2(a,b); _SELP_21(__VA_ARGS__); }while(0)
#define _SELP_24(a,b,...) do{ _SELP_2(a,b); _SELP_22(__VA_ARGS__); }while(0)
#define SERIAL_ECHOLNPAIR(...) _SELP_N(NUM_ARGS(__VA_ARGS__),__VA_ARGS__)
#define SERIAL_ECHOPGM(S) (serialprintPGM(PSTR(S)))
#define SERIAL_ECHOLNPGM(S) (serialprintPGM(PSTR(S "\n")))
#define SERIAL_ECHOPAIR_F(pre, ...) do{ SERIAL_ECHO(pre); SERIAL_ECHO_F(__VA_ARGS__); }while(0)
#define SERIAL_ECHOLNPAIR_F(...) do{ SERIAL_ECHOPAIR_F(__VA_ARGS__); SERIAL_EOL(); }while(0)
#define SERIAL_ECHO_START() serial_echo_start()
#define SERIAL_ERROR_START() serial_error_start()
#define SERIAL_EOL() SERIAL_CHAR('\n')
#define SERIAL_ECHO_MSG(S) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(S); }while(0)
#define SERIAL_ERROR_MSG(S) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(S); }while(0)
#define SERIAL_ECHO_SP(C) serial_spaces(C)
//
// Functions for serial printing from PROGMEM. (Saves loads of SRAM.)

58
Marlin/src/feature/I2CPositionEncoder.cpp
View File

@ -47,8 +47,7 @@ void I2CPositionEncoder::init(const uint8_t address, const AxisEnum axis) {
initialized++;
SERIAL_ECHOPAIR("Setting up encoder on ", axis_codes[encoderAxis]);
SERIAL_ECHOLNPAIR(" axis, addr = ", address);
SERIAL_ECHOLNPAIR("Setting up encoder on ", axis_codes[encoderAxis], " axis, addr = ", address);
position = get_position();
}
@ -66,8 +65,7 @@ void I2CPositionEncoder::update() {
/*
if (trusted) { //commented out as part of the note below
trusted = false;
SERIAL_ECHOPAIR("Fault detected on ", axis_codes[encoderAxis]);
SERIAL_ECHOLNPGM(" axis encoder. Disengaging error correction until module is trusted again.");
SERIAL_ECHOLMPAIR("Fault detected on ", axis_codes[encoderAxis], " axis encoder. Disengaging error correction until module is trusted again.");
}
*/
return;
@ -92,8 +90,7 @@ void I2CPositionEncoder::update() {
if (millis() - lastErrorTime > I2CPE_TIME_TRUSTED) {
trusted = true;
SERIAL_ECHOPAIR("Untrusted encoder module on ", axis_codes[encoderAxis]);
SERIAL_ECHOLNPGM(" axis has been fault-free for set duration, reinstating error correction.");
SERIAL_ECHOLNPAIR("Untrusted encoder module on ", axis_codes[encoderAxis], " axis has been fault-free for set duration, reinstating error correction.");
//the encoder likely lost its place when the error occured, so we'll reset and use the printer's
//idea of where it the axis is to re-initialize
@ -172,8 +169,7 @@ void I2CPositionEncoder::update() {
LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i];
const int32_t errorP = int32_t(sumP * (1.0f / (I2CPE_ERR_PRST_ARRAY_SIZE)));
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]);
SERIAL_ECHOLNPGM("mm; correcting!");
SERIAL_ECHOLNPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis], "mm; correcting!");
thermalManager.babystepsTodo[encoderAxis] = -LROUND(errorP);
errPrstIdx = 0;
}
@ -192,9 +188,7 @@ void I2CPositionEncoder::update() {
if (ABS(error) > I2CPE_ERR_CNT_THRESH * planner.settings.axis_steps_per_mm[encoderAxis]) {
const millis_t ms = millis();
if (ELAPSED(ms, nextErrorCountTime)) {
SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis. error: ", (int)error);
SERIAL_ECHOLNPAIR("; diffSum: ", diffSum);
SERIAL_ECHOLNPAIR("Large error on ", axis_codes[encoderAxis], " axis. error: ", (int)error, "; diffSum: ", diffSum);
errorCount++;
nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS;
}
@ -215,8 +209,7 @@ void I2CPositionEncoder::set_homed() {
#ifdef I2CPE_DEBUG
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis encoder homed, offset of ", zeroOffset);
SERIAL_ECHOLNPGM(" ticks.");
SERIAL_ECHOLNPAIR(" axis encoder homed, offset of ", zeroOffset, " ticks.");
#endif
}
}
@ -261,9 +254,7 @@ float I2CPositionEncoder::get_axis_error_mm(const bool report) {
if (report) {
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis target: ", target);
SERIAL_ECHOPAIR(", actual: ", actual);
SERIAL_ECHOLNPAIR(", error : ",error);
SERIAL_ECHOLNPAIR(" axis target: ", target, ", actual: ", actual, ", error : ",error);
}
return error;
@ -296,10 +287,7 @@ int32_t I2CPositionEncoder::get_axis_error_steps(const bool report) {
if (report) {
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis target: ", target);
SERIAL_ECHOPAIR(", actual: ", encoderCountInStepperTicksScaled);
SERIAL_ECHOLNPAIR(", error : ", error);
SERIAL_ECHOLNPAIR(" axis target: ", target, ", actual: ", encoderCountInStepperTicksScaled, ", error : ", error);
if (suppressOutput) SERIAL_ECHOLNPGM("Discontinuity detected, suppressing error.");
}
@ -436,11 +424,9 @@ void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) {
travelledDistance = mm_from_count(ABS(stopCount - startCount));
SERIAL_ECHOPAIR("Attempted travel: ", travelDistance);
SERIAL_ECHOLNPGM("mm");
SERIAL_ECHOLNPAIR("Attempted travel: ", travelDistance, "mm");
SERIAL_ECHOPAIR(" Actual travel: ", travelledDistance);
SERIAL_ECHOLNPGM("mm");
SERIAL_ECHOLNPAIR(" Actual travel: ", travelledDistance, "mm");
//Calculate new axis steps per unit
old_steps_mm = planner.settings.axis_steps_per_mm[encoderAxis];
@ -705,21 +691,18 @@ void I2CPositionEncodersMgr::change_module_address(const uint8_t oldaddr, const
// First check 'new' address is not in use
Wire.beginTransmission(I2C_ADDRESS(newaddr));
if (!Wire.endTransmission()) {
SERIAL_ECHOPAIR("?There is already a device with that address on the I2C bus! (", newaddr);
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("?There is already a device with that address on the I2C bus! (", newaddr, ")");
return;
}
// Now check that we can find the module on the oldaddr address
Wire.beginTransmission(I2C_ADDRESS(oldaddr));
if (Wire.endTransmission()) {
SERIAL_ECHOPAIR("?No module detected at this address! (", oldaddr);
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("?No module detected at this address! (", oldaddr, ")");
return;
}
SERIAL_ECHOPAIR("Module found at ", oldaddr);
SERIAL_ECHOLNPAIR(", changing address to ", newaddr);
SERIAL_ECHOLNPAIR("Module found at ", oldaddr, ", changing address to ", newaddr);
// Change the modules address
Wire.beginTransmission(I2C_ADDRESS(oldaddr));
@ -755,13 +738,11 @@ void I2CPositionEncodersMgr::report_module_firmware(const uint8_t address) {
// First check there is a module
Wire.beginTransmission(I2C_ADDRESS(address));
if (Wire.endTransmission()) {
SERIAL_ECHOPAIR("?No module detected at this address! (", address);
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("?No module detected at this address! (", address, ")");
return;
}
SERIAL_ECHOPAIR("Requesting version info from module at address ", address);
SERIAL_ECHOLNPGM(":");
SERIAL_ECHOLNPAIR("Requesting version info from module at address ", address, ":");
Wire.beginTransmission(I2C_ADDRESS(address));
Wire.write(I2CPE_SET_REPORT_MODE);
@ -808,15 +789,13 @@ int8_t I2CPositionEncodersMgr::parse() {
else if (parser.seenval('I')) {
if (!parser.has_value()) {
SERIAL_ECHOLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1);
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1, "]");
return I2CPE_PARSE_ERR;
};
I2CPE_idx = parser.value_byte();
if (I2CPE_idx >= I2CPE_ENCODER_CNT) {
SERIAL_ECHOLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1);
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1, "]");
return I2CPE_PARSE_ERR;
}
@ -995,8 +974,7 @@ void I2CPositionEncodersMgr::M864() {
else return;
}
SERIAL_ECHOPAIR("Changing module at address ", I2CPE_addr);
SERIAL_ECHOLNPAIR(" to address ", newAddress);
SERIAL_ECHOLNPAIR("Changing module at address ", I2CPE_addr, " to address ", newAddress);
change_module_address(I2CPE_addr, newAddress);
}

20
Marlin/src/feature/I2CPositionEncoder.h
View File

@ -238,8 +238,7 @@ class I2CPositionEncodersMgr {
static void report_status(const int8_t idx) {
CHECK_IDX();
SERIAL_ECHOPAIR("Encoder ", idx);
SERIAL_ECHOPGM(": ");
SERIAL_ECHOLNPAIR("Encoder ", idx, ": ");
encoders[idx].get_raw_count();
encoders[idx].passes_test(true);
}
@ -264,22 +263,19 @@ class I2CPositionEncodersMgr {
static void report_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
SERIAL_ECHOLNPAIR(" axis is ", encoders[idx].get_error_count());
SERIAL_ECHOLNPAIR("Error count on ", axis_codes[axis], " axis is ", encoders[idx].get_error_count());
}
static void reset_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_error_count(0);
SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
SERIAL_ECHOLNPGM(" axis has been reset.");
SERIAL_ECHOLNPAIR("Error count on ", axis_codes[axis], " axis has been reset.");
}
static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_enabled(enabled);
SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis]);
SERIAL_ECHOPGM(" axis is ");
SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis], " axis is ");
serialprintPGM(encoders[idx].get_ec_enabled() ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPGM("abled.");
}
@ -287,17 +283,13 @@ class I2CPositionEncodersMgr {
static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_threshold(newThreshold);
SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
SERIAL_ECHOPAIR(" axis set to ", FIXFLOAT(newThreshold));
SERIAL_ECHOLNPGM("mm.");
SERIAL_ECHOLNPAIR("Error correct threshold for ", axis_codes[axis], " axis set to ", FIXFLOAT(newThreshold), "mm.");
}
static void get_ec_threshold(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
const float threshold = encoders[idx].get_ec_threshold();
SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
SERIAL_ECHOPAIR(" axis is ", FIXFLOAT(threshold));
SERIAL_ECHOLNPGM("mm.");
SERIAL_ECHOLNPAIR("Error correct threshold for ", axis_codes[axis], " axis is ", FIXFLOAT(threshold), "mm.");
}
static int8_t idx_from_axis(const AxisEnum axis) {

21
Marlin/src/feature/bedlevel/abl/abl.cpp
View File

@ -338,22 +338,11 @@ float bilinear_z_offset(const float raw[XYZ]) {
/*
static float last_offset = 0;
if (ABS(last_offset - offset) > 0.2) {
SERIAL_ECHOPGM("Sudden Shift at ");
SERIAL_ECHOPAIR("x=", rx);
SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[X_AXIS]);
SERIAL_ECHOLNPAIR(" -> gridx=", gridx);
SERIAL_ECHOPAIR(" y=", ry);
SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[Y_AXIS]);
SERIAL_ECHOLNPAIR(" -> gridy=", gridy);
SERIAL_ECHOPAIR(" ratio_x=", ratio_x);
SERIAL_ECHOLNPAIR(" ratio_y=", ratio_y);
SERIAL_ECHOPAIR(" z1=", z1);
SERIAL_ECHOPAIR(" z2=", z2);
SERIAL_ECHOPAIR(" z3=", z3);
SERIAL_ECHOLNPAIR(" z4=", z4);
SERIAL_ECHOPAIR(" L=", L);
SERIAL_ECHOPAIR(" R=", R);
SERIAL_ECHOLNPAIR(" offset=", offset);
SERIAL_ECHOLNPAIR("Sudden Shift at x=", rx, " / ", bilinear_grid_spacing[X_AXIS], " -> gridx=", gridx);
SERIAL_ECHOLNPAIR(" y=", ry, " / ", bilinear_grid_spacing[Y_AXIS], " -> gridy=", gridy);
SERIAL_ECHOLNPAIR(" ratio_x=", ratio_x, " ratio_y=", ratio_y);
SERIAL_ECHOLNPAIR(" z1=", z1, " z2=", z2, " z3=", z3, " z4=", z4);
SERIAL_ECHOLNPAIR(" L=", L, " R=", R, " offset=", offset);
}
last_offset = offset;
//*/

3
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View File

@ -45,8 +45,7 @@
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)
if (!isnan(z_values[x][y])) {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" M421 I", x);
SERIAL_ECHOPAIR(" J", y);
SERIAL_ECHOPAIR(" M421 I", x, " J", y);
SERIAL_ECHOPAIR_F(" Z", z_values[x][y], 2);
SERIAL_EOL();
serial_delay(75); // Prevent Printrun from exploding

14
Marlin/src/feature/bedlevel/ubl/ubl.h
View File

@ -202,11 +202,7 @@ class unified_bed_leveling {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
serialprintPGM( !WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) ? PSTR("x1_i") : PSTR("yi") );
SERIAL_ECHOPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0);
SERIAL_ECHOPAIR(",x1_i=", x1_i);
SERIAL_ECHOPAIR(",yi=", yi);
SERIAL_CHAR(')');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0, ",x1_i=", x1_i, ",yi=", yi, ")");
}
#endif
@ -235,12 +231,8 @@ class unified_bed_leveling {
if (!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(y1_i, 0, GRID_MAX_POINTS_Y - 1)) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
serialprintPGM( !WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) ? PSTR("xi") : PSTR("y1_i") );
SERIAL_ECHOPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0);
SERIAL_ECHOPAIR(", xi=", xi);
SERIAL_ECHOPAIR(", y1_i=", y1_i);
SERIAL_CHAR(')');
SERIAL_EOL();
serialprintPGM(!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) ? PSTR("xi") : PSTR("y1_i"));
SERIAL_ECHOLNPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0, ", xi=", xi, ", y1_i=", y1_i, ")");
}
#endif

33
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@ -598,8 +598,7 @@
}
if (!WITHIN(g29_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPGM("?Invalid storage slot.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
return;
}
@ -627,8 +626,7 @@
}
if (!WITHIN(g29_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPGM("?Invalid storage slot.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
goto LEAVE;
}
@ -1640,10 +1638,8 @@
if (storage_slot == -1)
SERIAL_ECHOPGM("No Mesh Loaded.");
else {
SERIAL_ECHOPAIR("Mesh ", storage_slot);
SERIAL_ECHOPGM(" Loaded.");
}
else
SERIAL_ECHOPAIR("Mesh ", storage_slot, " Loaded.");
SERIAL_EOL();
serial_delay(50);
@ -1683,19 +1679,16 @@
SERIAL_EOL();
#if HAS_KILL
SERIAL_ECHOPAIR("Kill pin on :", KILL_PIN);
SERIAL_ECHOLNPAIR(" state:", READ(KILL_PIN));
SERIAL_ECHOLNPAIR("Kill pin on :", int(KILL_PIN), " state:", READ(KILL_PIN));
#endif
SERIAL_EOL();
serial_delay(50);
#if ENABLED(UBL_DEVEL_DEBUGGING)
SERIAL_ECHOLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation); SERIAL_EOL();
SERIAL_ECHOLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk); SERIAL_EOL();
SERIAL_ECHOLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation, "\nubl_state_recursion_chk :", ubl_state_recursion_chk);
serial_delay(50);
SERIAL_ECHOPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index()));
SERIAL_ECHOLNPAIR(" to ", hex_address((void*)settings.meshes_end_index()));
SERIAL_ECHOLNPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index()), " to ", hex_address((void*)settings.meshes_end_index()));
serial_delay(50);
SERIAL_ECHOLNPAIR("sizeof(ubl) : ", (int)sizeof(ubl)); SERIAL_EOL();
@ -1705,8 +1698,7 @@
SERIAL_ECHOLNPAIR("EEPROM free for UBL: ", hex_address((void*)(settings.meshes_end_index() - settings.meshes_start_index())));
serial_delay(50);
SERIAL_ECHOPAIR("EEPROM can hold ", settings.calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
SERIAL_ECHOLNPAIR("EEPROM can hold ", settings.calc_num_meshes(), " meshes.\n");
serial_delay(25);
#endif // UBL_DEVEL_DEBUGGING
@ -1753,24 +1745,21 @@
}
if (!parser.has_value()) {
SERIAL_ECHOLNPGM("?Storage slot # required.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Storage slot # required.\n?Use 0 to ", a - 1);
return;
}
g29_storage_slot = parser.value_int();
if (!WITHIN(g29_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPGM("?Invalid storage slot.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
return;
}
float tmp_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
settings.load_mesh(g29_storage_slot, &tmp_z_values);
SERIAL_ECHOPAIR("Subtracting mesh in slot ", g29_storage_slot);
SERIAL_ECHOLNPGM(" from current mesh.");
SERIAL_ECHOLNPAIR("Subtracting mesh in slot ", g29_storage_slot, " from current mesh.");
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)

13
Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
View File

@ -65,12 +65,13 @@
cell_dest_yi = get_cell_index_y(end[Y_AXIS]);
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" ubl.line_to_destination_cartesian(xe=", destination[X_AXIS]);
SERIAL_ECHOPAIR(", ye=", destination[Y_AXIS]);
SERIAL_ECHOPAIR(", ze=", destination[Z_AXIS]);
SERIAL_ECHOPAIR(", ee=", destination[E_AXIS]);
SERIAL_CHAR(')');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" ubl.line_to_destination_cartesian(xe=", destination[X_AXIS],
", ye=", destination[Y_AXIS],
", ze=", destination[Z_AXIS],
", ee=", destination[E_AXIS],
")"
);
debug_current_and_destination(PSTR("Start of ubl.line_to_destination_cartesian()"));
}

15
Marlin/src/feature/dac/stepper_dac.cpp
View File

@ -105,15 +105,12 @@ void dac_print_values() {
SERIAL_ECHO_MSG("Stepper current values in % (Amps):");
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(X_AXIS));
SERIAL_ECHOPAIR(") Y:", dac_perc(Y_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(Y_AXIS));
SERIAL_ECHOPAIR(") Z:", dac_perc(Z_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(Z_AXIS));
SERIAL_ECHOPAIR(") E:", dac_perc(E_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(E_AXIS));
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR(
" X:", dac_perc(X_AXIS), " (", dac_amps(X_AXIS), ")"
" Y:", dac_perc(Y_AXIS), " (", dac_amps(Y_AXIS), ")"
" Z:", dac_perc(Z_AXIS), " (", dac_amps(Z_AXIS), ")"
" E:", dac_perc(E_AXIS), " (", dac_amps(E_AXIS), ")"
);
}
void dac_commit_eeprom() {

20
Marlin/src/feature/fwretract.cpp
View File

@ -112,15 +112,15 @@ void FWRetract::retract(const bool retracting
#endif
/* // debugging
SERIAL_ECHOLNPAIR("retracting ", retracting);
SERIAL_ECHOLNPAIR("swapping ", swapping);
SERIAL_ECHOLNPAIR("active extruder ", active_extruder);
SERIAL_ECHOLNPAIR(
"retracting ", retracting,
"swapping ", swapping
"active extruder ", active_extruder
);
for (uint8_t i = 0; i < EXTRUDERS; ++i) {
SERIAL_ECHOPAIR("retracted[", i);
SERIAL_ECHOLNPAIR("] ", retracted[i]);
SERIAL_ECHOLNPAIR("retracted[", i, "] ", retracted[i]);
#if EXTRUDERS > 1
SERIAL_ECHOPAIR("retracted_swap[", i);
SERIAL_ECHOLNPAIR("] ", retracted_swap[i]);
SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", retracted_swap[i]);
#endif
}
SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]);
@ -209,11 +209,9 @@ void FWRetract::retract(const bool retracting
SERIAL_ECHOLNPAIR("swapping ", swapping);
SERIAL_ECHOLNPAIR("active_extruder ", active_extruder);
for (uint8_t i = 0; i < EXTRUDERS; ++i) {
SERIAL_ECHOPAIR("retracted[", i);
SERIAL_ECHOLNPAIR("] ", retracted[i]);
SERIAL_ECHOLNPAIR("retracted[", i, "] ", retracted[i]);
#if EXTRUDERS > 1
SERIAL_ECHOPAIR("retracted_swap[", i);
SERIAL_ECHOLNPAIR("] ", retracted_swap[i]);
SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", retracted_swap[i]);
#endif
}
SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]);

12
Marlin/src/feature/mixing.cpp
View File

@ -139,19 +139,11 @@ void Mixer::refresh_collector(const float proportion/*=1.0*/, const uint8_t t/*=
cmax = MAX(cmax, v);
csum += v;
}
//SERIAL_ECHOPAIR("Mixer::refresh_collector(", proportion);
//SERIAL_ECHOPAIR(", ", int(t));
//SERIAL_ECHOPAIR(") cmax=", cmax);
//SERIAL_ECHOPAIR(" csum=", csum);
//SERIAL_ECHOPGM(" color");
//SERIAL_ECHOPAIR("Mixer::refresh_collector(", proportion, ", ", int(t), ") cmax=", cmax, " csum=", csum, " color");
const float inv_prop = proportion / csum;
MIXER_STEPPER_LOOP(i) {
collector[i] = color[t][i] * inv_prop;
//SERIAL_ECHOPAIR(" [", int(t));
//SERIAL_ECHOPAIR("][", int(i));
//SERIAL_ECHOPAIR("] = ", int(color[t][i]));
//SERIAL_ECHOPAIR(" (", collector[i]);
//SERIAL_ECHOPGM(") ");
//SERIAL_ECHOPAIR(" [", int(t), "][", int(i), "] = ", int(color[t][i]), " (", collector[i], ") ");
}
//SERIAL_EOL();
}

19
Marlin/src/feature/mixing.h
View File

@ -148,11 +148,7 @@ class Mixer {
MIXER_STEPPER_LOOP(i) tcolor[i] = mix[i] * scale;
#ifdef MIXER_NORMALIZER_DEBUG
SERIAL_ECHOPAIR("Mix [", int(mix[0]));
SERIAL_ECHOPAIR(", ", int(mix[1]));
SERIAL_ECHOPAIR("] to Color [", int(tcolor[0]));
SERIAL_ECHOPAIR(", ", int(tcolor[1]));
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("Mix [", int(mix[0]), ", ", int(mix[1]), "] to Color [", int(tcolor[0]), ", ", int(tcolor[1]), "]");
#endif
}
@ -163,12 +159,7 @@ class Mixer {
mix[0] = mixer_perc_t(100.0f * color[j][0] / ctot);
mix[1] = 100 - mix[0];
#ifdef MIXER_NORMALIZER_DEBUG
SERIAL_ECHOPAIR("V-tool ", int(j));
SERIAL_ECHOPAIR(" [", int(color[j][0]));
SERIAL_ECHOPAIR(", ", int(color[j][1]));
SERIAL_ECHOPAIR("] to Mix [", int(mix[0]));
SERIAL_ECHOPAIR(", ", int(mix[1]));
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("V-tool ", int(j), " [", int(color[j][0]), ", ", int(color[j][1]), "] to Mix [", int(mix[0]), ", ", int(mix[1]), "]");
#endif
}
@ -211,11 +202,7 @@ class Mixer {
mix[0] = (mixer_perc_t)CEIL(100.0f * gradient.color[0] / ctot);
mix[1] = 100 - mix[0];
#ifdef MIXER_NORMALIZER_DEBUG
SERIAL_ECHOPAIR("Gradient [", int(gradient.color[0]));
SERIAL_ECHOPAIR(", ", int(gradient.color[1]));
SERIAL_ECHOPAIR("] to Mix [", int(mix[0]));
SERIAL_ECHOPAIR(", ", int(mix[1]));
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("Gradient [", int(gradient.color[0]), ", ", int(gradient.color[1]), "] to Mix [", int(mix[0]), ", ", int(mix[1]), "]");
#endif
}

11
Marlin/src/feature/pause.cpp
View File

@ -581,11 +581,12 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
*/
void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) {
/*
SERIAL_ECHOLNPGM("start of resume_print()");
SERIAL_ECHOPAIR("\ndual_x_carriage_mode:", dual_x_carriage_mode);
SERIAL_ECHOPAIR("\nextruder_duplication_enabled:", extruder_duplication_enabled);
SERIAL_ECHOPAIR("\nactive_extruder:", active_extruder);
SERIAL_ECHOLNPGM("\n");
SERIAL_ECHOLNPAIR(
"start of resume_print()\ndual_x_carriage_mode:", dual_x_carriage_mode,
"\nextruder_duplication_enabled:", extruder_duplication_enabled,
"\nactive_extruder:", active_extruder,
"\n"
);
//*/
if (!did_pause_print) return;

6
Marlin/src/feature/power_loss_recovery.cpp
View File

@ -357,8 +357,7 @@ void PrintJobRecovery::resume() {
void PrintJobRecovery::debug(PGM_P const prefix) {
serialprintPGM(prefix);
SERIAL_ECHOPAIR(" Job Recovery Info...\nvalid_head:", int(info.valid_head));
SERIAL_ECHOLNPAIR(" valid_foot:", int(info.valid_foot));
SERIAL_ECHOLNPAIR(" Job Recovery Info...\nvalid_head:", int(info.valid_head), " valid_foot:", int(info.valid_foot));
if (info.valid_head) {
if (info.valid_head == info.valid_foot) {
SERIAL_ECHOPGM("current_position: ");
@ -394,8 +393,7 @@ void PrintJobRecovery::resume() {
#endif
#if HAS_LEVELING
SERIAL_ECHOPAIR("leveling: ", int(info.leveling));
SERIAL_ECHOLNPAIR(" fade: ", int(info.fade));
SERIAL_ECHOLNPAIR("leveling: ", int(info.leveling), "\n fade: ", int(info.fade));
#endif
#if ENABLED(FWRETRACT)
SERIAL_ECHOPGM("retract: ");

9
Marlin/src/feature/prusa_MMU2/mmu2.cpp
View File

@ -174,8 +174,7 @@ void MMU2::mmuLoop() {
sscanf(rx_buffer, "%uok\n", &version);
#if ENABLED(MMU2_DEBUG)
SERIAL_ECHOLNPAIR("MMU => ", version);
SERIAL_ECHOLNPGM("MMU <= 'S2'");
SERIAL_ECHOLNPAIR("MMU => ", version, "\nMMU <= 'S2'");
#endif
tx_str_P(PSTR("S2\n")); // read build number
@ -234,8 +233,7 @@ void MMU2::mmuLoop() {
sscanf(rx_buffer, "%hhuok\n", &finda);
#if ENABLED(MMU2_DEBUG)
SERIAL_ECHOLNPAIR("MMU => ", finda);
SERIAL_ECHOLNPGM("MMU - ENABLED");
SERIAL_ECHOLNPAIR("MMU => ", finda, "\nMMU - ENABLED");
#endif
enabled = true;
@ -309,8 +307,7 @@ void MMU2::mmuLoop() {
// filament type
int filament = cmd - MMU_CMD_F0;
#if ENABLED(MMU2_DEBUG)
SERIAL_ECHOPAIR("MMU <= F", filament);
SERIAL_ECHOPGM(" ");
SERIAL_ECHOPAIR("MMU <= F", filament, " ");
SERIAL_ECHO_F(cmd_arg, DEC);
SERIAL_ECHOPGM("\n");
#endif

4
Marlin/src/feature/twibus.cpp
View File

@ -92,9 +92,7 @@ void TWIBus::send() {
void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) {
SERIAL_ECHO_START();
serialprintPGM(prefix);
SERIAL_ECHOPAIR(": from:", adr);
SERIAL_ECHOPAIR(" bytes:", bytes);
SERIAL_ECHOPGM(" data:");
SERIAL_ECHOPAIR(": from:", adr, " bytes:", bytes, " data:");
}
// static

7
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -346,12 +346,7 @@ inline bool look_for_lines_to_connect() {
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) {
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx);
SERIAL_ECHOPAIR(", sy=", sy);
SERIAL_ECHOPAIR(") -> (ex=", ex);
SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" Connecting with horizontal line (sx=", sx, ", sy=", sy, ") -> (ex=", ex, ", ey=", ey, ")");
//debug_current_and_destination(PSTR("Connecting horizontal line."));
}
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);

49
Marlin/src/gcode/parser.cpp
View File

@ -272,8 +272,7 @@ void GCodeParser::parse(char *p) {
#if ENABLED(DEBUG_GCODE_PARSER)
if (debug) {
SERIAL_ECHOPAIR("Got letter ", code);
SERIAL_ECHOPAIR(" at index ", (int)(p - command_ptr - 1));
SERIAL_ECHOPAIR("Got letter ", code, " at index ", (int)(p - command_ptr - 1));
if (has_num) SERIAL_ECHOPGM(" (has_num)");
}
#endif
@ -329,47 +328,41 @@ void GCodeParser::parse(char *p) {
void GCodeParser::unknown_command_error() {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, command_ptr);
SERIAL_CHAR('"');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(MSG_UNKNOWN_COMMAND, command_ptr, "\"");
}
#if ENABLED(DEBUG_GCODE_PARSER)
void GCodeParser::debug() {
SERIAL_ECHOPAIR("Command: ", command_ptr);
SERIAL_ECHOPAIR(" (", command_letter);
SERIAL_ECHOPAIR("Command: ", command_ptr, " (", command_letter);
SERIAL_ECHO(codenum);
SERIAL_ECHOLNPGM(")");
#if ENABLED(FASTER_GCODE_PARSER)
SERIAL_ECHOPGM(" args: \"");
for (char c = 'A'; c <= 'Z'; ++c)
if (seen(c)) { SERIAL_CHAR(c); SERIAL_CHAR(' '); }
SERIAL_ECHOPGM(" args: { ");
for (char c = 'A'; c <= 'Z'; ++c) if (seen(c)) { SERIAL_CHAR(c); SERIAL_CHAR(' '); }
SERIAL_CHAR('}');
#else
SERIAL_ECHOPAIR(" args: \"", command_args);
SERIAL_ECHOPAIR(" args: { ", command_args, " }");
#endif
SERIAL_CHAR('"');
if (string_arg) {
SERIAL_ECHOPGM(" string: \"");
SERIAL_ECHO(string_arg);
SERIAL_CHAR('"');
}
if (string_arg) SERIAL_ECHOPAIR(" string: \"", string_arg, "\"");
SERIAL_ECHOLNPGM("\n");
for (char c = 'A'; c <= 'Z'; ++c) {
if (seen(c)) {
SERIAL_ECHOPAIR("Code '", c); SERIAL_ECHOPGM("':");
if (has_value()) {
SERIAL_ECHOPAIR("\n float: ", value_float());
SERIAL_ECHOPAIR("\n long: ", value_long());
SERIAL_ECHOPAIR("\n ulong: ", value_ulong());
SERIAL_ECHOPAIR("\n millis: ", value_millis());
SERIAL_ECHOPAIR("\n sec-ms: ", value_millis_from_seconds());
SERIAL_ECHOPAIR("\n int: ", value_int());
SERIAL_ECHOPAIR("\n ushort: ", value_ushort());
SERIAL_ECHOPAIR("\n byte: ", (int)value_byte());
SERIAL_ECHOPAIR("\n bool: ", (int)value_bool());
SERIAL_ECHOPAIR("\n linear: ", value_linear_units());
SERIAL_ECHOPAIR("\n celsius: ", value_celsius());
SERIAL_ECHOPAIR(
"\n float: ", value_float(),
"\n long: ", value_long(),
"\n ulong: ", value_ulong(),
"\n millis: ", value_millis(),
"\n sec-ms: ", value_millis_from_seconds(),
"\n int: ", value_int(),
"\n ushort: ", value_ushort(),
"\n byte: ", (int)value_byte(),
"\n bool: ", (int)value_bool(),
"\n linear: ", value_linear_units(),
"\n celsius: ", value_celsius()
);
}
else
SERIAL_ECHOPGM(" (no value)");

3
Marlin/src/gcode/parser.h
View File

@ -120,8 +120,7 @@ public:
param[ind] = ptr ? ptr - command_ptr : 0; // parameter offset or 0
#if ENABLED(DEBUG_GCODE_PARSER)
if (codenum == 800) {
SERIAL_ECHOPAIR("Set bit ", (int)ind);
SERIAL_ECHOPAIR(" of codebits (", hex_address((void*)(codebits >> 16)));
SERIAL_ECHOPAIR("Set bit ", (int)ind, " of codebits (", hex_address((void*)(codebits >> 16)));
print_hex_word((uint16_t)(codebits & 0xFFFF));
SERIAL_ECHOLNPAIR(") | param = ", (int)param[ind]);
}

17
Marlin/src/gcode/queue.cpp
View File

@ -150,9 +150,7 @@ bool enqueue_and_echo_command(const char* cmd) {
if (_enqueuecommand(cmd)) {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_ENQUEUEING, cmd);
SERIAL_CHAR('"');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(MSG_ENQUEUEING, cmd, "\"");
return true;
}
return false;
@ -398,9 +396,10 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
stream_state = StreamState::PACKET_RESET;
bytes_received = 0;
time_stream_start = millis();
SERIAL_ECHOPAIR("echo: Datastream initialized (", stream_header.filesize);
SERIAL_ECHOLNPGM(" bytes expected)");
SERIAL_ECHOLNPAIR("so", buffer_size); // confirm active stream and the maximum block size supported
// confirm active stream and the maximum block size supported
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Datastream initialized (", stream_header.filesize, " bytes expected)");
SERIAL_ECHOLNPAIR("so", buffer_size);
}
else {
SERIAL_ECHO_MSG("Datastream init error (invalid token)");
@ -468,8 +467,7 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("Block(", packet.header.id);
SERIAL_ECHOLNPGM(") Corrupt");
SERIAL_ECHOLNPAIR("Block(", packet.header.id, ") Corrupt");
stream_state = StreamState::PACKET_FLUSHRX;
}
break;
@ -504,8 +502,7 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
card.flag.binary_mode = false;
SERIAL_ECHO_START();
SERIAL_ECHO(card.filename);
SERIAL_ECHOPAIR(" transfer completed @ ", ((bytes_received / (millis() - time_stream_start) * 1000) / 1024));
SERIAL_ECHOLNPGM("KiB/s");
SERIAL_ECHOLNPAIR(" transfer completed @ ", ((bytes_received / (millis() - time_stream_start) * 1000) / 1024), "KiB/s");
SERIAL_ECHOLNPGM("sc"); // transmit stream complete token
card.closefile();
return;

414
Marlin/src/module/configuration_store.cpp
View File

@ -382,8 +382,8 @@ void MarlinSettings::postprocess() {
#if ENABLED(EEPROM_CHITCHAT)
#define CHITCHAT_ECHO(V) SERIAL_ECHO(V)
#define CHITCHAT_ECHOLNPGM(STR) SERIAL_ECHOLNPGM(STR)
#define CHITCHAT_ECHOPAIR(STR,V) SERIAL_ECHOPAIR(STR,V)
#define CHITCHAT_ECHOLNPAIR(STR,V) SERIAL_ECHOLNPAIR(STR,V)
#define CHITCHAT_ECHOPAIR(...) SERIAL_ECHOPAIR(__VA_ARGS__)
#define CHITCHAT_ECHOLNPAIR(...) SERIAL_ECHOLNPAIR(__VA_ARGS__)
#define CHITCHAT_ECHO_START() SERIAL_ECHO_START()
#define CHITCHAT_ERROR_START() SERIAL_ERROR_START()
#define CHITCHAT_ERROR_MSG(STR) SERIAL_ERROR_MSG(STR)
@ -392,8 +392,8 @@ void MarlinSettings::postprocess() {
#else
#define CHITCHAT_ECHO(V) NOOP
#define CHITCHAT_ECHOLNPGM(STR) NOOP
#define CHITCHAT_ECHOPAIR(STR,V) NOOP
#define CHITCHAT_ECHOLNPAIR(STR,V) NOOP
#define CHITCHAT_ECHOPAIR(...) NOOP
#define CHITCHAT_ECHOLNPAIR(...) NOOP
#define CHITCHAT_ECHO_START() NOOP
#define CHITCHAT_ERROR_START() NOOP
#define CHITCHAT_ERROR_MSG(STR) NOOP
@ -1104,9 +1104,7 @@ void MarlinSettings::postprocess() {
// Report storage size
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPAIR("Settings Stored (", eeprom_size);
CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)final_crc);
CHITCHAT_ECHOLNPGM(")");
CHITCHAT_ECHOLNPAIR("Settings Stored (", eeprom_size, " bytes; crc ", (uint32_t)final_crc, ")");
eeprom_error |= size_error(eeprom_size);
}
@ -1144,9 +1142,7 @@ void MarlinSettings::postprocess() {
stored_ver[1] = '\0';
}
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPGM("EEPROM version mismatch ");
CHITCHAT_ECHOPAIR("(EEPROM=", stored_ver);
CHITCHAT_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")");
CHITCHAT_ECHOLNPAIR("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
eeprom_error = true;
}
else {
@ -1812,24 +1808,17 @@ void MarlinSettings::postprocess() {
eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET));
if (eeprom_error) {
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)));
CHITCHAT_ECHOLNPAIR(" Size: ", datasize());
CHITCHAT_ECHOLNPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)), " Size: ", datasize());
}
else if (working_crc != stored_crc) {
eeprom_error = true;
CHITCHAT_ERROR_START();
CHITCHAT_ECHOPGM("EEPROM CRC mismatch - (stored) ");
CHITCHAT_ECHO(stored_crc);
CHITCHAT_ECHOPGM(" != ");
CHITCHAT_ECHO(working_crc);
CHITCHAT_ECHOLNPGM(" (calculated)!");
CHITCHAT_ECHOLNPAIR("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
}
else if (!validating) {
CHITCHAT_ECHO_START();
CHITCHAT_ECHO(version);
CHITCHAT_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc);
CHITCHAT_ECHOLNPGM(")");
CHITCHAT_ECHOLNPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET), " bytes; crc ", (uint32_t)working_crc, ")");
}
if (!validating && !eeprom_error) postprocess();
@ -1857,8 +1846,7 @@ void MarlinSettings::postprocess() {
if (ubl.storage_slot >= 0) {
load_mesh(ubl.storage_slot);
CHITCHAT_ECHOPAIR("Mesh ", ubl.storage_slot);
CHITCHAT_ECHOLNPGM(" loaded from storage.");
CHITCHAT_ECHOLNPAIR("Mesh ", ubl.storage_slot, " loaded from storage.");
}
else {
ubl.reset();
@ -1924,9 +1912,7 @@ void MarlinSettings::postprocess() {
const int16_t a = calc_num_meshes();
if (!WITHIN(slot, 0, a - 1)) {
ubl_invalid_slot(a);
CHITCHAT_ECHOPAIR("E2END=", persistentStore.capacity() - 1);
CHITCHAT_ECHOPAIR(" meshes_end=", meshes_end);
CHITCHAT_ECHOLNPAIR(" slot=", slot);
CHITCHAT_ECHOLNPAIR("E2END=", persistentStore.capacity() - 1, " meshes_end=", meshes_end, " slot=", slot);
CHITCHAT_EOL();
return;
}
@ -2314,7 +2300,7 @@ void MarlinSettings::reset() {
#define CONFIG_ECHO_HEADING(STR) do{ if (!forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); } }while(0)
#if HAS_TRINAMIC
void say_M906() { SERIAL_ECHOPGM(" M906"); }
inline void say_M906(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M906"); }
#if HAS_STEALTHCHOP
void say_M569(const char * const etc=NULL) {
SERIAL_ECHOPGM(" M569 S1");
@ -2326,15 +2312,15 @@ void MarlinSettings::reset() {
}
#endif
#if ENABLED(HYBRID_THRESHOLD)
void say_M913() { SERIAL_ECHOPGM(" M913"); }
inline void say_M913() { SERIAL_ECHOPGM(" M913"); }
#endif
#if USE_SENSORLESS
void say_M914() { SERIAL_ECHOPGM(" M914"); }
inline void say_M914() { SERIAL_ECHOPGM(" M914"); }
#endif
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void say_M603() { SERIAL_ECHOPGM(" M603 "); }
inline void say_M603(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M603 "); }
#endif
inline void say_units(const bool colon) {
@ -2403,28 +2389,22 @@ void MarlinSettings::reset() {
}
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0]));
#if EXTRUDERS > 1
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
#if EXTRUDERS > 2
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
#if EXTRUDERS > 3
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
#if EXTRUDERS > 4
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
#if EXTRUDERS > 5
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5]));
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
@ -2441,43 +2421,50 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("Maximum feedrates (units/s):");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS]));
#endif
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS])
, " Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS])
, " Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS])
#if DISABLED(DISTINCT_E_FACTORS)
, " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])
#endif
);
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START();
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M203 T", (int)i);
SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)]));
SERIAL_ECHOLNPAIR(
" M203 T", (int)i
, " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
);
}
#endif
CONFIG_ECHO_HEADING("Maximum Acceleration (units/s2):");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS]));
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS]));
#endif
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS])
, " Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS])
, " Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS])
#if DISABLED(DISTINCT_E_FACTORS)
, " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])
#endif
);
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START();
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M201 T", (int)i);
SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)]));
}
for (uint8_t i = 0; i < E_STEPPERS; i++)
SERIAL_ECHOLNPAIR(
" M201 T", (int)i
, " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
);
#endif
CONFIG_ECHO_HEADING("Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M204 P", LINEAR_UNIT(planner.settings.acceleration));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(planner.settings.retract_acceleration));
SERIAL_ECHOLNPAIR(" T", LINEAR_UNIT(planner.settings.travel_acceleration));
SERIAL_ECHOLNPAIR(
" M204 P", LINEAR_UNIT(planner.settings.acceleration)
, " R", LINEAR_UNIT(planner.settings.retract_acceleration)
, " T", LINEAR_UNIT(planner.settings.travel_acceleration)
);
if (!forReplay) {
CONFIG_ECHO_START();
@ -2494,39 +2481,42 @@ void MarlinSettings::reset() {
SERIAL_EOL();
}
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s));
SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s));
#if ENABLED(JUNCTION_DEVIATION)
SERIAL_ECHOPAIR(" J", LINEAR_UNIT(planner.junction_deviation_mm));
#endif
#if HAS_CLASSIC_JERK
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS]));
#if DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE)
SERIAL_ECHOPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS]));
SERIAL_ECHOLNPAIR(
" M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us)
, " S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
, " T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)
#if ENABLED(JUNCTION_DEVIATION)
, " J", LINEAR_UNIT(planner.junction_deviation_mm)
#endif
#endif
SERIAL_EOL();
#if HAS_CLASSIC_JERK
, " X", LINEAR_UNIT(planner.max_jerk[X_AXIS])
, " Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS])
, " Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS])
#if DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE)
, " E", LINEAR_UNIT(planner.max_jerk[E_AXIS])
#endif
#endif
);
#if HAS_M206_COMMAND
CONFIG_ECHO_HEADING("Home offset:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M206 X", LINEAR_UNIT(home_offset[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(home_offset[Y_AXIS]));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(home_offset[Z_AXIS]));
SERIAL_ECHOLNPAIR(
" M206 X", LINEAR_UNIT(home_offset[X_AXIS])
, " Y", LINEAR_UNIT(home_offset[Y_AXIS])
, " Z", LINEAR_UNIT(home_offset[Z_AXIS])
);
#endif
#if HAS_HOTEND_OFFSET
CONFIG_ECHO_HEADING("Hotend offsets:");
CONFIG_ECHO_START();
for (uint8_t e = 1; e < HOTENDS; e++) {
SERIAL_ECHOPAIR(" M218 T", (int)e);
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(hotend_offset[X_AXIS][e]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e]));
SERIAL_ECHOPAIR(
" M218 T", (int)e
, " X", LINEAR_UNIT(hotend_offset[X_AXIS][e])
, " Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e])
);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e]), 3);
}
#endif
@ -2555,11 +2545,12 @@ void MarlinSettings::reset() {
#endif
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M420 S", planner.leveling_active ? 1 : 0
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
, " Z", LINEAR_UNIT(planner.z_fade_height)
#endif
);
#if ENABLED(MESH_BED_LEVELING)
@ -2567,8 +2558,7 @@ void MarlinSettings::reset() {
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1);
SERIAL_ECHOPAIR(" Y", (int)py + 1);
SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1, " Y", (int)py + 1);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(mbl.z_values[px][py]), 5);
}
}
@ -2580,8 +2570,7 @@ void MarlinSettings::reset() {
SERIAL_EOL();
ubl.report_state();
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot);
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
SERIAL_ECHOLNPAIR("EEPROM can hold ", calc_num_meshes(), " meshes.\n");
}
//ubl.report_current_mesh(); // This is too verbose for large meshes. A better (more terse)
@ -2592,8 +2581,7 @@ void MarlinSettings::reset() {
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" G29 W I", (int)px);
SERIAL_ECHOPAIR(" J", (int)py);
SERIAL_ECHOPAIR(" G29 W I", (int)px, " J", (int)py);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(z_values[px][py]), 5);
}
}
@ -2619,10 +2607,7 @@ void MarlinSettings::reset() {
case Z_PROBE_SERVO_NR:
#endif
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M281 P", int(i));
SERIAL_ECHOPAIR(" L", servo_angles[i][0]);
SERIAL_ECHOPAIR(" U", servo_angles[i][1]);
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M281 P", int(i), " L", servo_angles[i][0], " U", servo_angles[i][1]);
default: break;
}
}
@ -2633,33 +2618,37 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("SCARA settings: S<seg-per-sec> P<theta-psi-offset> T<theta-offset>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M665 S", delta_segments_per_second);
SERIAL_ECHOPAIR(" P", scara_home_offset[A_AXIS]);
SERIAL_ECHOPAIR(" T", scara_home_offset[B_AXIS]);
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(scara_home_offset[Z_AXIS]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M665 S", delta_segments_per_second
, " P", scara_home_offset[A_AXIS]
, " T", scara_home_offset[B_AXIS]
, " Z", LINEAR_UNIT(scara_home_offset[Z_AXIS])
);
#elif ENABLED(DELTA)
CONFIG_ECHO_HEADING("Endstop adjustment:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS]));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS]));
SERIAL_ECHOLNPAIR(
" M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS])
, " Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS])
, " Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS])
);
CONFIG_ECHO_HEADING("Delta settings: L<diagonal_rod> R<radius> H<height> S<segments_per_s> B<calibration radius> XYZ<tower angle corrections>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M665 L", LINEAR_UNIT(delta_diagonal_rod));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(delta_radius));
SERIAL_ECHOPAIR(" H", LINEAR_UNIT(delta_height));
SERIAL_ECHOPAIR(" S", delta_segments_per_second);
SERIAL_ECHOPAIR(" B", LINEAR_UNIT(delta_calibration_radius));
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M665 L", LINEAR_UNIT(delta_diagonal_rod)
, " R", LINEAR_UNIT(delta_radius)
, " H", LINEAR_UNIT(delta_height)
, " S", delta_segments_per_second
, " B", LINEAR_UNIT(delta_calibration_radius)
, " X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS])
, " Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS])
, " Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])
);
#elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
#elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
CONFIG_ECHO_HEADING("Endstop adjustment:");
CONFIG_ECHO_START();
@ -2686,10 +2675,12 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("Material heatup parameters:");
for (uint8_t i = 0; i < COUNT(ui.preheat_hotend_temp); i++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M145 S", (int)i);
SERIAL_ECHOPAIR(" H", TEMP_UNIT(ui.preheat_hotend_temp[i]));
SERIAL_ECHOPAIR(" B", TEMP_UNIT(ui.preheat_bed_temp[i]));
SERIAL_ECHOLNPAIR(" F", int(ui.preheat_fan_speed[i]));
SERIAL_ECHOLNPAIR(
" M145 S", (int)i
, " H", TEMP_UNIT(ui.preheat_hotend_temp[i])
, " B", TEMP_UNIT(ui.preheat_bed_temp[i])
, " F", int(ui.preheat_fan_speed[i])
);
}
#endif
@ -2702,10 +2693,12 @@ void MarlinSettings::reset() {
if (forReplay) {
HOTEND_LOOP() {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M301 E", e);
SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, e));
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, e)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, e)));
SERIAL_ECHOPAIR(
" M301 E", e
, " P", PID_PARAM(Kp, e)
, " I", unscalePID_i(PID_PARAM(Ki, e))
, " D", unscalePID_d(PID_PARAM(Kd, e))
);
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
@ -2718,23 +2711,25 @@ void MarlinSettings::reset() {
// !forReplay || HOTENDS == 1
{
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0));
SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
#endif
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M301 P", PID_PARAM(Kp, 0) // for compatibility with hosts, only echo values for E0
, " I", unscalePID_i(PID_PARAM(Ki, 0))
, " D", unscalePID_d(PID_PARAM(Kd, 0))
#if ENABLED(PID_EXTRUSION_SCALING)
, " C", PID_PARAM(Kc, 0)
, " L", thermalManager.lpq_len
#endif
);
}
#endif // PIDTEMP
#if ENABLED(PIDTEMPBED)
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M304 P", thermalManager.bed_pid.Kp);
SERIAL_ECHOPAIR(" I", unscalePID_i(thermalManager.bed_pid.Ki));
SERIAL_ECHOPAIR(" D", unscalePID_d(thermalManager.bed_pid.Kd));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M304 P", thermalManager.bed_pid.Kp
, " I", unscalePID_i(thermalManager.bed_pid.Ki)
, " D", unscalePID_d(thermalManager.bed_pid.Kd)
);
#endif
#endif // PIDTEMP || PIDTEMPBED
@ -2755,16 +2750,20 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("Retract: S<length> F<units/m> Z<lift>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(fwretract.settings.retract_length));
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_length));
SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s)));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(fwretract.settings.retract_zraise));
SERIAL_ECHOLNPAIR(
" M207 S", LINEAR_UNIT(fwretract.settings.retract_length)
, " W", LINEAR_UNIT(fwretract.settings.swap_retract_length)
, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s))
, " Z", LINEAR_UNIT(fwretract.settings.retract_zraise)
);
CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length));
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length));
SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s)));
SERIAL_ECHOLNPAIR(
" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length)
, " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length)
, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s))
);
#if ENABLED(FWRETRACT_AUTORETRACT)
@ -2810,67 +2809,65 @@ void MarlinSettings::reset() {
* TMC stepper driver current
*/
CONFIG_ECHO_HEADING("Stepper driver current:");
CONFIG_ECHO_START();
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M906();
#endif
#if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR(" X", stepperX.getMilliamps());
#endif
#if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR(" Y", stepperY.getMilliamps());
#endif
#if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR(" Z", stepperZ.getMilliamps());
#endif
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
SERIAL_EOL();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(
#if AXIS_IS_TMC(X)
" X", stepperX.getMilliamps(),
#endif
#if AXIS_IS_TMC(Y)
" Y", stepperY.getMilliamps(),
#endif
#if AXIS_IS_TMC(Z)
" Z", stepperZ.getMilliamps()
#endif
);
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
say_M906();
say_M906(forReplay);
SERIAL_ECHOPGM(" I1");
#endif
#if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR(" X", stepperX2.getMilliamps());
#endif
#if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR(" Y", stepperY2.getMilliamps());
#endif
#if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR(" Z", stepperZ2.getMilliamps());
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
#if AXIS_IS_TMC(X2)
" X", stepperX2.getMilliamps(),
#endif
#if AXIS_IS_TMC(Y2)
" Y", stepperY2.getMilliamps(),
#endif
#if AXIS_IS_TMC(Z2)
" Z", stepperZ2.getMilliamps()
#endif
);
#endif
#if AXIS_IS_TMC(Z3)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps());
#endif
#if AXIS_IS_TMC(E0)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps());
#endif
#if AXIS_IS_TMC(E1)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps());
#endif
#if AXIS_IS_TMC(E2)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps());
#endif
#if AXIS_IS_TMC(E3)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps());
#endif
#if AXIS_IS_TMC(E4)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps());
#endif
#if AXIS_IS_TMC(E5)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps());
#endif
SERIAL_EOL();
@ -2916,8 +2913,7 @@ void MarlinSettings::reset() {
#if AXIS_HAS_STEALTHCHOP(Z3)
say_M913();
SERIAL_ECHOPGM(" I2");
SERIAL_ECHOLNPAIR(" Z", TMC_GET_PWMTHRS(Z, Z3));
SERIAL_ECHOLNPAIR(" I2 Z", TMC_GET_PWMTHRS(Z, Z3));
#endif
#if AXIS_HAS_STEALTHCHOP(E0)
@ -2988,8 +2984,7 @@ void MarlinSettings::reset() {
#if HAS_Z3_SENSORLESS
say_M914();
SERIAL_ECHOPGM(" I2");
SERIAL_ECHOLNPAIR(" Z", stepperZ3.sgt());
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.sgt());
#endif
#endif // USE_SENSORLESS
@ -3080,20 +3075,19 @@ void MarlinSettings::reset() {
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]);
#else
LOOP_L_N(i, EXTRUDERS) {
SERIAL_ECHOPAIR(" M900 T", int(i));
SERIAL_ECHOLNPAIR(" K", planner.extruder_advance_K[i]);
}
LOOP_L_N(i, EXTRUDERS)
SERIAL_ECHOLNPAIR(" M900 T", int(i), " K", planner.extruder_advance_K[i]);
#endif
#endif
#if HAS_MOTOR_CURRENT_PWM
CONFIG_ECHO_HEADING("Stepper motor currents:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M907 X", stepper.motor_current_setting[0]);
SERIAL_ECHOPAIR(" Z", stepper.motor_current_setting[1]);
SERIAL_ECHOPAIR(" E", stepper.motor_current_setting[2]);
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M907 X", stepper.motor_current_setting[0]
, " Z", stepper.motor_current_setting[1]
, " E", stepper.motor_current_setting[2]
);
#endif
/**
@ -3101,39 +3095,21 @@ void MarlinSettings::reset() {
*/
#if ENABLED(ADVANCED_PAUSE_FEATURE)
CONFIG_ECHO_HEADING("Filament load/unload lengths:");
CONFIG_ECHO_START();
#if EXTRUDERS == 1
say_M603();
SERIAL_ECHOPAIR("L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length));
say_M603(forReplay);
SERIAL_ECHOLNPAIR("L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length));
#else
say_M603();
SERIAL_ECHOPAIR("T0 L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length));
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T1 L", LINEAR_UNIT(fc_settings[1].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[1].unload_length));
#define _ECHO_603(N) do{ say_M603(forReplay); SERIAL_ECHOLNPAIR("T" STRINGIFY(N) " L", LINEAR_UNIT(fc_settings[N].load_length), " U", LINEAR_UNIT(fc_settings[N].unload_length)); }while(0)
_ECHO_603(0);
_ECHO_603(1);
#if EXTRUDERS > 2
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T2 L", LINEAR_UNIT(fc_settings[2].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[2].unload_length));
_ECHO_603(2);
#if EXTRUDERS > 3
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T3 L", LINEAR_UNIT(fc_settings[3].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[3].unload_length));
_ECHO_603(3);
#if EXTRUDERS > 4
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T4 L", LINEAR_UNIT(fc_settings[4].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[4].unload_length));
_ECHO_603(4);
#if EXTRUDERS > 5
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T5 L", LINEAR_UNIT(fc_settings[5].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[5].unload_length));
_ECHO_603(5);
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3

41
Marlin/src/module/printcounter.cpp
View File

@ -185,51 +185,32 @@ void PrintCounter::showStats() {
char buffer[21];
SERIAL_ECHOPGM(MSG_STATS);
SERIAL_ECHOLNPAIR(
"Prints: ", data.totalPrints,
", Finished: ", data.finishedPrints,
", Failed: ", data.totalPrints - data.finishedPrints
- ((isRunning() || isPaused()) ? 1 : 0) // Remove 1 from failures with an active counter
);
SERIAL_ECHOPGM("Prints: ");
SERIAL_ECHO(data.totalPrints);
SERIAL_ECHOPGM(", Finished: ");
SERIAL_ECHO(data.finishedPrints);
SERIAL_ECHOPGM(", Failed: "); // Note: Removes 1 from failures with an active counter
SERIAL_ECHO(data.totalPrints - data.finishedPrints
- ((isRunning() || isPaused()) ? 1 : 0));
SERIAL_EOL();
SERIAL_ECHOPGM(MSG_STATS);
duration_t elapsed = data.printTime;
elapsed.toString(buffer);
SERIAL_ECHOPGM("Total time: ");
SERIAL_ECHO(buffer);
SERIAL_ECHOPAIR("Total time: ", buffer);
#if ENABLED(DEBUG_PRINTCOUNTER)
SERIAL_ECHOPGM(" (");
SERIAL_ECHO(data.printTime);
SERIAL_ECHOPAIR(" (", data.printTime);
SERIAL_CHAR(')');
#endif
elapsed = data.longestPrint;
elapsed.toString(buffer);
SERIAL_ECHOPGM(", Longest job: ");
SERIAL_ECHO(buffer);
SERIAL_ECHOPAIR(", Longest job: ", buffer);
#if ENABLED(DEBUG_PRINTCOUNTER)
SERIAL_ECHOPGM(" (");
SERIAL_ECHO(data.longestPrint);
SERIAL_ECHOPAIR(" (", data.longestPrint);
SERIAL_CHAR(')');
#endif
SERIAL_EOL();
SERIAL_ECHOPGM(MSG_STATS);
SERIAL_ECHOPGM("Filament used: ");
SERIAL_ECHO(data.filamentUsed / 1000);
SERIAL_ECHOPAIR("\n" MSG_STATS "Filament used: ", data.filamentUsed / 1000);
SERIAL_CHAR('m');
SERIAL_EOL();
#if SERVICE_INTERVAL_1 > 0

37
Marlin/src/module/probe.cpp
View File

@ -83,11 +83,7 @@ float zprobe_zoffset; // Initialized by settings.load()
*/
static void dock_sled(bool stow) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("dock_sled(", stow);
SERIAL_CHAR(')');
SERIAL_EOL();
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("dock_sled(", stow, ")");
#endif
// Dock sled a bit closer to ensure proper capturing
@ -317,11 +313,7 @@ float zprobe_zoffset; // Initialized by settings.load()
bltouch_command(deploy ? BLTOUCH_DEPLOY : BLTOUCH_STOW);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("set_bltouch_deployed(", deploy);
SERIAL_CHAR(')');
SERIAL_EOL();
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("set_bltouch_deployed(", deploy, ")");
#endif
return false;
@ -334,11 +326,7 @@ float zprobe_zoffset; // Initialized by settings.load()
*/
inline void do_probe_raise(const float z_raise) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("do_probe_raise(", z_raise);
SERIAL_CHAR(')');
SERIAL_EOL();
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("do_probe_raise(", z_raise, ")");
#endif
float z_dest = z_raise;
@ -707,10 +695,7 @@ static float run_z_probe() {
const float z2 = current_position[Z_AXIS];
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("2nd Probe Z:", z2);
SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - z2);
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("2nd Probe Z:", z2, " Discrepancy:", first_probe_z - z2);
#endif
// Return a weighted average of the fast and slow probes
@ -742,12 +727,14 @@ static float run_z_probe() {
float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> probe_pt(", LOGICAL_X_POSITION(rx));
SERIAL_ECHOPAIR(", ", LOGICAL_Y_POSITION(ry));
SERIAL_ECHOPAIR(", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none");
SERIAL_ECHOPAIR(", ", int(verbose_level));
SERIAL_ECHOPAIR(", ", probe_relative ? "probe" : "nozzle");
SERIAL_ECHOLNPGM("_relative)");
SERIAL_ECHOLNPAIR(
">>> probe_pt(", LOGICAL_X_POSITION(rx),
", ", LOGICAL_Y_POSITION(ry),
", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none",
", ", int(verbose_level),
", ", probe_relative ? "probe" : "nozzle",
"_relative)"
);
DEBUG_POS("", current_position);
}
#endif

33
Marlin/src/module/scara.cpp
View File

@ -45,8 +45,7 @@ void scara_set_axis_is_at_home(const AxisEnum axis) {
float homeposition[XYZ];
LOOP_XYZ(i) homeposition[i] = base_home_pos((AxisEnum)i);
// SERIAL_ECHOPAIR("homeposition X:", homeposition[X_AXIS]);
// SERIAL_ECHOLNPAIR(" Y:", homeposition[Y_AXIS]);
// SERIAL_ECHOLNPAIR("homeposition X:", homeposition[X_AXIS], " Y:", homeposition[Y_AXIS]);
/**
* Get Home position SCARA arm angles using inverse kinematics,
@ -55,8 +54,7 @@ void scara_set_axis_is_at_home(const AxisEnum axis) {
inverse_kinematics(homeposition);
forward_kinematics_SCARA(delta[A_AXIS], delta[B_AXIS]);
// SERIAL_ECHOPAIR("Cartesian X:", cartes[X_AXIS]);
// SERIAL_ECHOLNPAIR(" Y:", cartes[Y_AXIS]);
// SERIAL_ECHOLNPAIR("Cartesian X:", cartes[X_AXIS], " Y:", cartes[Y_AXIS]);
current_position[axis] = cartes[axis];
@ -80,14 +78,15 @@ void forward_kinematics_SCARA(const float &a, const float &b) {
cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi
/*
SERIAL_ECHOPAIR("SCARA FK Angle a=", a);
SERIAL_ECHOPAIR(" b=", b);
SERIAL_ECHOPAIR(" a_sin=", a_sin);
SERIAL_ECHOPAIR(" a_cos=", a_cos);
SERIAL_ECHOPAIR(" b_sin=", b_sin);
SERIAL_ECHOLNPAIR(" b_cos=", b_cos);
SERIAL_ECHOPAIR(" cartes[X_AXIS]=", cartes[X_AXIS]);
SERIAL_ECHOLNPAIR(" cartes[Y_AXIS]=", cartes[Y_AXIS]);
SERIAL_ECHOLNPAIR(
"SCARA FK Angle a=", a,
" b=", b,
" a_sin=", a_sin,
" a_cos=", a_cos,
" b_sin=", b_sin,
" b_cos=", b_cos
);
SERIAL_ECHOLNPAIR(" cartes (X,Y) = "(cartes[X_AXIS], ", ", cartes[Y_AXIS], ")");
//*/
}
@ -132,18 +131,12 @@ void inverse_kinematics(const float (&raw)[XYZ]) {
/*
DEBUG_POS("SCARA IK", raw);
DEBUG_POS("SCARA IK", delta);
SERIAL_ECHOPAIR(" SCARA (x,y) ", sx);
SERIAL_ECHOPAIR(",", sy);
SERIAL_ECHOPAIR(" C2=", C2);
SERIAL_ECHOPAIR(" S2=", S2);
SERIAL_ECHOPAIR(" Theta=", THETA);
SERIAL_ECHOLNPAIR(" Phi=", PHI);
SERIAL_ECHOLNPAIR(" SCARA (x,y) ", sx, ",", sy, " C2=", C2, " S2=", S2, " Theta=", THETA, " Phi=", PHI);
//*/
}
void scara_report_positions() {
SERIAL_ECHOPAIR("SCARA Theta:", planner.get_axis_position_degrees(A_AXIS));
SERIAL_ECHOLNPAIR(" Psi+Theta:", planner.get_axis_position_degrees(B_AXIS));
SERIAL_ECHOLNPAIR("SCARA Theta:", planner.get_axis_position_degrees(A_AXIS), " Psi+Theta:", planner.get_axis_position_degrees(B_AXIS));
SERIAL_EOL();
}

63
Marlin/src/module/temperature.cpp
View File

@ -456,37 +456,26 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
bias = constrain(bias, 20, max_pow - 20);
d = (bias > max_pow >> 1) ? max_pow - 1 - bias : bias;
SERIAL_ECHOPAIR(MSG_BIAS, bias);
SERIAL_ECHOPAIR(MSG_D, d);
SERIAL_ECHOPAIR(MSG_T_MIN, min);
SERIAL_ECHOPAIR(MSG_T_MAX, max);
SERIAL_ECHOPAIR(MSG_BIAS, bias, MSG_D, d, MSG_T_MIN, min, MSG_T_MAX, max);
if (cycles > 2) {
float Ku = (4.0f * d) / (float(M_PI) * (max - min) * 0.5f),
Tu = ((float)(t_low + t_high) * 0.001f);
SERIAL_ECHOPAIR(MSG_KU, Ku);
SERIAL_ECHOPAIR(MSG_TU, Tu);
tune_pid.Kp = 0.6f * Ku;
tune_pid.Ki = 2 * tune_pid.Kp / Tu;
tune_pid.Kd = tune_pid.Kp * Tu * 0.125f;
SERIAL_ECHOPAIR(MSG_KU, Ku, MSG_TU, Tu);
SERIAL_ECHOLNPGM("\n" MSG_CLASSIC_PID);
SERIAL_ECHOPAIR(MSG_KP, tune_pid.Kp);
SERIAL_ECHOPAIR(MSG_KI, tune_pid.Ki);
SERIAL_ECHOLNPAIR(MSG_KD, tune_pid.Kd);
SERIAL_ECHOLNPAIR(MSG_KP, tune_pid.Kp, MSG_KI, tune_pid.Ki, MSG_KD, tune_pid.Kd);
/**
tune_pid.Kp = 0.33*Ku;
tune_pid.Ki = tune_pid.Kp/Tu;
tune_pid.Kd = tune_pid.Kp*Tu/3;
SERIAL_ECHOLNPGM(" Some overshoot");
SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp);
SERIAL_ECHOPAIR(" Ki: ", tune_pid.Ki);
SERIAL_ECHOPAIR(" Kd: ", tune_pid.Kd);
SERIAL_ECHOLNPAIR(" Kp: ", tune_pid.Kp, " Ki: ", tune_pid.Ki, " Kd: ", tune_pid.Kd, " No overshoot");
tune_pid.Kp = 0.2*Ku;
tune_pid.Ki = 2*tune_pid.Kp/Tu;
tune_pid.Kd = tune_pid.Kp*Tu/3;
SERIAL_ECHOLNPGM(" No overshoot");
SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp);
SERIAL_ECHOPAIR(" Ki: ", tune_pid.Ki);
SERIAL_ECHOPAIR(" Kd: ", tune_pid.Kd);
SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp, " Ki: ", tune_pid.Ki, " Kd: ", tune_pid.Kd);
*/
}
}
@ -807,16 +796,20 @@ float Temperature::get_pid_output(const int8_t e) {
#if ENABLED(PID_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_PID_DEBUG, HOTEND_INDEX);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX]);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_OUTPUT, pid_output);
SERIAL_ECHOPAIR(
MSG_PID_DEBUG, HOTEND_INDEX,
MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX],
MSG_PID_DEBUG_OUTPUT, pid_output
);
#if DISABLED(PID_OPENLOOP)
SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, work_pid[HOTEND_INDEX].Kp);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, work_pid[HOTEND_INDEX].Ki);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_DTERM, work_pid[HOTEND_INDEX].Kd);
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(MSG_PID_DEBUG_CTERM, work_pid[HOTEND_INDEX].Kc);
#endif
SERIAL_ECHOPAIR(
MSG_PID_DEBUG_PTERM, work_pid[HOTEND_INDEX].Kp,
MSG_PID_DEBUG_ITERM, work_pid[HOTEND_INDEX].Ki,
MSG_PID_DEBUG_DTERM, work_pid[HOTEND_INDEX].Kd
#if ENABLED(PID_EXTRUSION_SCALING),
MSG_PID_DEBUG_CTERM, work_pid[HOTEND_INDEX].Kc
#endif
);
#endif
SERIAL_EOL();
#endif // PID_DEBUG
@ -869,13 +862,14 @@ float Temperature::get_pid_output(const int8_t e) {
#if ENABLED(PID_BED_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" PID_BED_DEBUG : Input ", current_temperature_bed);
SERIAL_ECHOPAIR(" Output ", pid_output);
#if DISABLED(PID_OPENLOOP)
SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, work_pid.Kp);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, work_pid.Ki);
SERIAL_ECHOLNPAIR(MSG_PID_DEBUG_DTERM, work_pid.Kd);
#endif
SERIAL_ECHOLNPAIR(
" PID_BED_DEBUG : Input ", current_temperature_bed, " Output ", pid_output,
#if DISABLED(PID_OPENLOOP)
MSG_PID_DEBUG_PTERM, work_pid.Kp,
MSG_PID_DEBUG_ITERM, work_pid.Ki,
MSG_PID_DEBUG_DTERM, work_pid.Kd,
#endif
);
#endif
return pid_output;
@ -1622,10 +1616,7 @@ void Temperature::init() {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: ");
if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHO(heater_id);
SERIAL_ECHOPAIR(" ; State:", *state);
SERIAL_ECHOPAIR(" ; Timer:", *timer);
SERIAL_ECHOPAIR(" ; Temperature:", current);
SERIAL_ECHOPAIR(" ; Target Temp:", target);
SERIAL_ECHOPAIR(" ; State:", *state, " ; Timer:", *timer, " ; Temperature:", current, " ; Target Temp:", target);
if (heater_id >= 0)
SERIAL_ECHOPAIR(" ; Idle Timeout:", heater_idle_timeout_exceeded[heater_id]);
else

8
Marlin/src/module/tool_change.cpp
View File

@ -804,12 +804,8 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Offset Tool XY by { ", xdiff);
SERIAL_ECHOPAIR(", ", ydiff);
SERIAL_ECHOPAIR(", ", zdiff);
SERIAL_ECHOLNPGM(" }");
}
if (DEBUGGING(LEVELING))
SERIAL_ECHOLNPAIR("Offset Tool XY by { ", xdiff, ", ", ydiff, ", ", zdiff, " }");
#endif
// The newly-selected extruder XY is actually at...

38
Marlin/src/sd/cardreader.cpp
View File

@ -438,9 +438,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
filespos[file_subcall_ctr] = sdpos;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", path);
SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]);
SERIAL_ECHOLNPAIR("\" pos", sdpos);
SERIAL_ECHOLNPAIR("SUBROUTINE CALL target:\"", path, "\" parent:\"", proc_filenames[file_subcall_ctr], "\" pos", sdpos);
file_subcall_ctr++;
}
else
@ -470,8 +468,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
if (file.open(curDir, fname, O_READ)) {
filesize = file.fileSize();
sdpos = 0;
SERIAL_ECHOPAIR(MSG_SD_FILE_OPENED, fname);
SERIAL_ECHOLNPAIR(MSG_SD_SIZE, filesize);
SERIAL_ECHOLNPAIR(MSG_SD_FILE_OPENED, fname, MSG_SD_SIZE, filesize);
SERIAL_ECHOLNPGM(MSG_SD_FILE_SELECTED);
getfilename(0, fname);
@ -480,18 +477,12 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
// SERIAL_ECHOPAIR(MSG_SD_FILE_LONG_NAME, longFilename);
//}
}
else {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_CHAR('.');
SERIAL_EOL();
}
else
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, fname, ".");
}
else { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_CHAR('.');
SERIAL_EOL();
}
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, fname, ".");
else {
flag.saving = true;
getfilename(0, fname);
@ -520,10 +511,8 @@ void CardReader::removeFile(const char * const name) {
presort();
#endif
}
else {
SERIAL_ECHOPAIR("Deletion failed, File: ", fname);
SERIAL_CHAR('.');
}
else
SERIAL_ECHOLNPAIR("Deletion failed, File: ", fname, ".");
}
void CardReader::report_status() {
@ -669,9 +658,7 @@ const char* CardReader::diveToFile(SdFile*& curDir, const char * const path, con
if (echo) SERIAL_ECHOLN(dosSubdirname);
if (!myDir.open(curDir, dosSubdirname, O_READ)) {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname);
SERIAL_CHAR('.');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname, ".");
return NULL;
}
curDir = &myDir;
@ -1030,11 +1017,8 @@ void CardReader::printingHasFinished() {
void CardReader::openJobRecoveryFile(const bool read) {
if (!isDetected()) return;
if (recovery.file.isOpen()) return;
if (!recovery.file.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name);
SERIAL_CHAR('.');
SERIAL_EOL();
}
if (!recovery.file.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC))
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name, ".");
else if (!read)
SERIAL_ECHOLNPAIR(MSG_SD_WRITE_TO_FILE, job_recovery_file_name);
}

Write Preview
Loading…
Cancel
Save