Giuliano
4e16e699c1
Fix sanity checks for dual axes ( #10633 )
6 years ago
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type ( #10630 )
6 years ago
Scott Lahteine
8c5bc77fb9
Fix the sanity-check for config versions
6 years ago
Scott Lahteine
81b632c255
Additional temp-oriented improvements
6 years ago
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
6 years ago
Scott Lahteine
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
6 years ago
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
6 years ago
Scott Lahteine
616651ff23
Add sanity check for LED_CONTROL_MENU
Addressing #10569
6 years ago
Scott Lahteine
f790b4bc0a
Reorganize some conditionals
6 years ago
Scott Lahteine
df6bc812b5
Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE
As pointed out in #10532
6 years ago
Scott Lahteine
299c4fed42
Undefine PIDTEMPBED without a bed heater
6 years ago
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
6 years ago
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
6 years ago
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
6 years ago
Scott Lahteine
f0cbf3d432
Correction to sanity check
6 years ago
Scott Lahteine
80e29492c6
TRIGORILLA => TRIGORILLA_13
7 years ago
Marcio Teixeira
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
6 years ago
Scott Lahteine
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping ( #10454 )
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
6 years ago
Scott Lahteine
39c6f65ce7
Ignore LCD_BED_LEVELING with UBL
6 years ago
Chris Pepper
c9aed73987
Fix missed includes from HAL macro patch ( #10416 )
6 years ago
Chris Pepper
cc6d41e1d3
Use a macro for HAL header redirection ( #10380 )
6 years ago
Luc Van Daele
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT ( #10386 )
6 years ago
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
6 years ago
Eduardo José Tagle
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR ( #10373 )
6 years ago
Sean
2d9b0a66fe
Add Filament Change accelerations
7 years ago
Scott Lahteine
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
6 years ago
Scott Lahteine
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
As suggested by @GMagician
6 years ago
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
6 years ago
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
Marcio Teixeira
75037493fa
Default active low for TMC2130 DIAG1 ( #10294 )
- Added sanity check to inform users to set the endstop to inverting
when using SENSORLESS_HOMING
6 years ago
Karl Andersson
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
7 years ago
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
Scott Lahteine
49f384a2ab
Note about MKS_MINI_12864 in sanitycheck
7 years ago
Scott Lahteine
f6d13e2295
Allow Z_SAFE_HOMING sanity checks to handle floats
7 years ago
Scott Lahteine
1be955e52a
Alert users about low Z jerk values
7 years ago
Scott Lahteine
a891af2f7a
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
Bob-the-Kuhn
433e984d1f
move comment to fix compile error
7 years ago
Bob-the-Kuhn
b756a15aba
another needs to be deleted
7 years ago
Bob-the-Kuhn
50c81ebe0d
remove check that always fails
7 years ago
Scott Lahteine
3ac135cef3
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
Eduardo José Tagle
97e8a6ebd9
Various fixes for DUE... ( #10152 )
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
7 years ago
Scott Lahteine
987597532c
For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
Fix #10098
7 years ago
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
7 years ago
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
7 years ago
Scott Lahteine
d603e655d3
Fix SWITCHING_EXTRUDER manual movement
7 years ago
Scott Lahteine
5f77816772
Reduce size of "only one" sanity checks
7 years ago
Scott Lahteine
e7570f3195
Improve TMC config organization, naming
7 years ago
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
Bob-the-Kuhn
0d8c15c01f
restore PR 9661 files & V1 fix
7 years ago