Jeffrey Li
26531f2715
Add lcd to all sample configs
7 years ago
Scott Lahteine
34a261416f
Add unaccented French language
7 years ago
Scott Lahteine
d3e5a22a5d
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
7 years ago
Slawomir Ciunczyk
a11e6a1022
Different NEOPIXEL types
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
7 years ago
Scott Lahteine
e9bcb9d048
Add 4 new LCD displays
7 years ago
Scott Lahteine
af15383578
Add XON/XOFF options to example configs
7 years ago
Scott Lahteine
5ae390e240
Apply NO_MOTION_BEFORE_HOMING to examples
7 years ago
Scott Lahteine
7cd5eb6d42
Update LEVEL_BED_CORNERS config option
7 years ago
Scott Lahteine
494b0eba2d
Config spacing fix
7 years ago
Scott Lahteine
479652073b
Config updates
7 years ago
Scott Lahteine
f536c4dccb
Move configs
7 years ago
Scott Lahteine
e4fcf460e7
Marlin bugfix-2.0.x Version/README
7 years ago
Michal Holes
54d48130f3
Slovak UTF-8 translation
Slovak UTF-8 translation
7 years ago
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
7 years ago
Scott Lahteine
a1878cd1c0
Add "Level Corners" menu option
7 years ago
GMagician
e9c72978c7
Implement SERVO_DELAY as array
This modify give SERVO_DELAY x servo basis
7 years ago
Scott Lahteine
804818b4d9
Bring configs up to date
7 years ago
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
7 years ago
Scott Lahteine
51864fd365
Add bed size as a configuration option
7 years ago
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
LVD-AC
4bc79ec877
Updates for G33-LCD interface
7 years ago
Scott Lahteine
f713f25fa5
Clean up excess whitespace
7 years ago
Scott Lahteine
fc9ce65095
Add `BUSY_WHILE_HEATING` for hosts that need it
7 years ago
Petr Zahradník
8c34233452
UTF-8 mapper for Czech
7 years ago
LVD-AC
567941e341
Fix for issues #6997 and #7152
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
7 years ago
Scott Lahteine
69297b2d7b
Make all EEPROM optimization options available
7 years ago
Scott Lahteine
232a10410d
LCD_FOR_MELZI
7 years ago
Scott Lahteine
dcec7178d1
Expose DISABLE_M503 option as a test option
7 years ago
Scott Lahteine
5b03f23fa2
Bring configurations up to date, fix some comments
7 years ago
Scott Lahteine
5b11b33854
Add support for Průša MK2 Multiplexer
7 years ago
Bob-the-Kuhn
9651d01e1a
Add Skynet/ANET A10 support
7 years ago
Scott Lahteine
eb314373bb
Config spacing & consistency, group custom LCDs
7 years ago
Scott Lahteine
afbc6e3e2f
Update DELTA/SCARA config comments
7 years ago
Bob-the-Kuhn
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
7 years ago
dot-bob
0bc66bf22c
PCA9632 PWM color LED support
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
7 years ago
Bob-the-Kuhn
1c107b3949
delete problem line
7 years ago
Scott Lahteine
e556ab1dff
Find three-point leveling points on Delta
7 years ago
Scott Lahteine
1919cb0d1e
Config cleanups
7 years ago
Roxy-3D
364f8fb613
Update Configuration.h files to better names ( #6814 )
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
7 years ago
Scott Lahteine
6ce2b1ff4a
G33 evolutionary changes
7 years ago
Scott Lahteine
99c4900a98
SPINDLE/LASER config changes
8 years ago
fixoid
c2321b1cdd
Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER
7 years ago
Scott Lahteine
6b6630e11b
Clean up trailing whitespace and tabs
7 years ago
Roxy-3D
8606644343
M48 Fix for Delta Configuration Files & UBL G29 only homes when necessary ( #6757 )
* Fix M48 for Delta's There was a scope issue: DELTA_PROBEABLE_RADIUS wasn't getting defined.
* Check if the specified G29 command requires homing
7 years ago
Scott Lahteine
1c4ed8b106
Note 5 extruders in config comments
7 years ago
Brian
faa270071d
Improve BLTOUCH_HEATERS_OFF functionality
- rename to PROBING_HEATERS_OFF
- move heater pausing functionality into thermalManager
- add variables, pause(), ispaused(), other functions
- add fan pausing functionality -> PROBING_FANS_OFF
- add probing_pause() wrapper
- move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
- example configs
7 years ago
Scott Lahteine
77769e284f
Edit configuration comments
7 years ago
Scott Lahteine
da08e11acd
Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling
7 years ago
Scott Lahteine
b93be716cf
Remove trailing whitespace
7 years ago
Scott Lahteine
54751e8557
Put DISTINCT_E_FACTORS adjacent to the affected settings
8 years ago