Scott Lahteine
7 years ago
42 changed files with 554 additions and 210 deletions
@ -0,0 +1,344 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
/**
|
|||
* French |
|||
* |
|||
* LCD Menu Messages |
|||
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|||
* |
|||
*/ |
|||
#ifndef LANGUAGE_FR_H |
|||
#define LANGUAGE_FR_H |
|||
|
|||
#define MAPPER_C2C3 |
|||
#define DISPLAY_CHARSET_ISO10646_1 |
|||
|
|||
#define WELCOME_MSG MACHINE_NAME _UxGT(" prête.") |
|||
#define MSG_BACK _UxGT("Retour") |
|||
#define MSG_SD_INSERTED _UxGT("Carte insérée") |
|||
#define MSG_SD_REMOVED _UxGT("Carte retirée") |
|||
#define MSG_LCD_ENDSTOPS _UxGT("Butées") // Max length 8 characters
|
|||
#define MSG_MAIN _UxGT("Menu principal") |
|||
#define MSG_AUTOSTART _UxGT("Demarrage auto") |
|||
#define MSG_DISABLE_STEPPERS _UxGT("Arrêter moteurs") |
|||
#define MSG_DEBUG_MENU _UxGT("Menu debug") |
|||
#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.") |
|||
#define MSG_AUTO_HOME _UxGT("Origine auto.") |
|||
#define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") |
|||
#define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") |
|||
#define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.") |
|||
#define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ") |
|||
#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") |
|||
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") |
|||
#define MSG_LEVEL_BED_DONE _UxGT("Mise à niveau OK!") |
|||
#define MSG_Z_FADE_HEIGHT _UxGT("Adoucir hauteur") |
|||
#define MSG_SET_HOME_OFFSETS _UxGT("Regl. décal. origine") |
|||
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués") |
|||
#define MSG_SET_ORIGIN _UxGT("Régler origine") |
|||
#define MSG_PREHEAT_1 _UxGT("Préchauffage PLA") |
|||
#define MSG_PREHEAT_1_N _UxGT("Préchauff. PLA ") |
|||
#define MSG_PREHEAT_1_ALL _UxGT("Préch. PLA Tout") |
|||
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" fini") |
|||
#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. PLA lit") |
|||
#define MSG_PREHEAT_1_SETTINGS _UxGT("Regl. prech. PLA") |
|||
#define MSG_PREHEAT_2 _UxGT("Préchauffage ABS") |
|||
#define MSG_PREHEAT_2_N _UxGT("Préchauff. ABS ") |
|||
#define MSG_PREHEAT_2_ALL _UxGT("Préch. ABS Tout") |
|||
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" fini") |
|||
#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. ABS lit") |
|||
#define MSG_PREHEAT_2_SETTINGS _UxGT("Regl. prech. ABS") |
|||
#define MSG_COOLDOWN _UxGT("Refroidir") |
|||
#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.") |
|||
#define MSG_SWITCH_PS_OFF _UxGT("Éteindre alim.") |
|||
#define MSG_EXTRUDE _UxGT("Éxtrusion") |
|||
#define MSG_RETRACT _UxGT("Rétraction") |
|||
#define MSG_MOVE_AXIS _UxGT("Déplacer un axe") |
|||
#define MSG_BED_LEVELING _UxGT("Règl. Niv. lit") |
|||
#define MSG_LEVEL_BED _UxGT("Règl. Niv. lit") |
|||
#define MSG_EDITING_STOPPED _UxGT("Arrêt edit. maillage") |
|||
#define MSG_USER_MENU _UxGT("Commandes perso") |
|||
|
|||
#define MSG_UBL_DOING_G29 _UxGT("G29 en cours") |
|||
#define MSG_UBL_UNHOMED _UxGT("Origine XYZ d'abord") |
|||
#define MSG_UBL_TOOLS _UxGT("Outils UBL") |
|||
#define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifié") |
|||
#define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel") |
|||
#define MSG_UBL_BC_INSERT _UxGT("Poser câle & mesurer") |
|||
#define MSG_UBL_BC_INSERT2 _UxGT("Mesure") |
|||
#define MSG_UBL_BC_REMOVE _UxGT("ôter et mesurer lit") |
|||
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant") |
|||
#define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL") |
|||
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL") |
|||
#define MSG_UBL_SET_BED_TEMP _UxGT("Température lit") |
|||
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP |
|||
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse") |
|||
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP |
|||
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") |
|||
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille") |
|||
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Termier maille") |
|||
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso") |
|||
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Créer maille") |
|||
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Créer maille PLA") |
|||
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Créer maille ABS") |
|||
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Créer maille froide") |
|||
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille") |
|||
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur") |
|||
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille") |
|||
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valider maille PLA") |
|||
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valider maille ABS") |
|||
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso") |
|||
#define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille") |
|||
#define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille") |
|||
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau à 3 points") |
|||
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau grille") |
|||
#define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau") |
|||
#define MSG_UBL_SIDE_POINTS _UxGT("Point latéral") |
|||
#define MSG_UBL_MAP_TYPE _UxGT("Type de carte") |
|||
#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille") |
|||
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hôte") |
|||
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV") |
|||
#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup") |
|||
#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL") |
|||
#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifier maille") |
|||
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage") |
|||
#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel") |
|||
#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto") |
|||
#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage") |
|||
#define MSG_UBL_INVALIDATE_ALL _UxGT("Annuler tout") |
|||
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus près") |
|||
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Réglage fin (tous)") |
|||
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Réglage fin (proche)") |
|||
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Stockage maille") |
|||
#define MSG_UBL_STORAGE_SLOT _UxGT("Slot mémoire") |
|||
#define MSG_UBL_LOAD_MESH _UxGT("Charger maille") |
|||
#define MSG_UBL_SAVE_MESH _UxGT("Sauver maille") |
|||
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL") |
|||
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL") |
|||
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Offset Z arrêté") |
|||
|
|||
|
|||
#define MSG_MOVING _UxGT("Déplacement...") |
|||
#define MSG_FREE_XY _UxGT("Débloquer XY") |
|||
#define MSG_MOVE_X _UxGT("Dépl. X") |
|||
#define MSG_MOVE_Y _UxGT("Dépl. Y") |
|||
#define MSG_MOVE_Z _UxGT("Dépl. Z") |
|||
#define MSG_MOVE_E _UxGT("Extruder") |
|||
#define MSG_MOVE_01MM _UxGT("Dépl. 0.1mm") |
|||
#define MSG_MOVE_1MM _UxGT("Dépl. 1mm") |
|||
#define MSG_MOVE_10MM _UxGT("Dépl. 10mm") |
|||
#define MSG_SPEED _UxGT(" Vitesse") |
|||
#define MSG_BED_Z _UxGT("Lit Z") |
|||
#define MSG_NOZZLE _UxGT("Buse") |
|||
#define MSG_BED _UxGT("Lit") |
|||
#define MSG_FAN_SPEED _UxGT("Vitesse ventil.") |
|||
#define MSG_FLOW _UxGT("Flux") |
|||
#define MSG_CONTROL _UxGT("Contrôler") |
|||
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") |
|||
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") |
|||
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Facteur") |
|||
#define MSG_AUTOTEMP _UxGT("Temp. Auto.") |
|||
#define MSG_ON _UxGT("Marche ") |
|||
#define MSG_OFF _UxGT("Arrêt") |
|||
#define MSG_PID_P _UxGT("PID-P") |
|||
#define MSG_PID_I _UxGT("PID-I") |
|||
#define MSG_PID_D _UxGT("PID-D") |
|||
#define MSG_PID_C _UxGT("PID-C") |
|||
#define MSG_SELECT _UxGT("Sélectionner") |
|||
#define MSG_ACC _UxGT("Accélération") |
|||
#define MSG_JERK _UxGT("Jerk") |
|||
#define MSG_VX_JERK _UxGT("Vx-jerk") |
|||
#define MSG_VY_JERK _UxGT("Vy-jerk") |
|||
#define MSG_VZ_JERK _UxGT("Vz-jerk") |
|||
#define MSG_VE_JERK _UxGT("Ve-jerk") |
|||
#define MSG_VELOCITY _UxGT("Vélocité") |
|||
#define MSG_VMAX _UxGT("Vmax") |
|||
#define MSG_VMIN _UxGT("Vmin") |
|||
#define MSG_VTRAV_MIN _UxGT("Vdepl min") |
|||
#define MSG_ACCELERATION _UxGT("Accélération") |
|||
#define MSG_AMAX _UxGT("Amax ") |
|||
#define MSG_A_RETRACT _UxGT("A-retract") |
|||
#define MSG_A_TRAVEL _UxGT("A-Dépl.") |
|||
#define MSG_STEPS_PER_MM _UxGT("Pas/mm") |
|||
#define MSG_XSTEPS _UxGT("Xpas/mm") |
|||
#define MSG_YSTEPS _UxGT("Ypas/mm") |
|||
#define MSG_ZSTEPS _UxGT("Zpas/mm") |
|||
#define MSG_ESTEPS _UxGT("Epas/mm") |
|||
#define MSG_E1STEPS _UxGT("E1pas/mm") |
|||
#define MSG_E2STEPS _UxGT("E2pas/mm") |
|||
#define MSG_E3STEPS _UxGT("E3pas/mm") |
|||
#define MSG_E4STEPS _UxGT("E4pas/mm") |
|||
#define MSG_E5STEPS _UxGT("E5pas/mm") |
|||
#define MSG_TEMPERATURE _UxGT("Température") |
|||
#define MSG_MOTION _UxGT("Mouvement") |
|||
#define MSG_FILAMENT _UxGT("Filament") |
|||
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") |
|||
#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") |
|||
#define MSG_ADVANCE_K _UxGT("Advance K") |
|||
#define MSG_CONTRAST _UxGT("Contraste LCD") |
|||
#define MSG_STORE_EEPROM _UxGT("Sauver config") |
|||
#define MSG_LOAD_EEPROM _UxGT("Lire config") |
|||
#define MSG_RESTORE_FAILSAFE _UxGT("Restaurer défauts") |
|||
#define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM") |
|||
#define MSG_REFRESH _UxGT("Actualiser") |
|||
#define MSG_WATCH _UxGT("Surveiller") |
|||
#define MSG_PREPARE _UxGT("Préparer") |
|||
#define MSG_TUNE _UxGT("Régler") |
|||
#define MSG_PAUSE_PRINT _UxGT("Interrompre impr.") |
|||
#define MSG_RESUME_PRINT _UxGT("Reprendre impr.") |
|||
#define MSG_STOP_PRINT _UxGT("Arrêter impr.") |
|||
#define MSG_CARD_MENU _UxGT("Impr. depuis SD") |
|||
#define MSG_NO_CARD _UxGT("Pas de carte") |
|||
#define MSG_DWELL _UxGT("Repos...") |
|||
#define MSG_USERWAIT _UxGT("Atten. de l'util.") |
|||
#define MSG_PRINT_PAUSED _UxGT("Impr. en pause") |
|||
#define MSG_RESUMING _UxGT("Repri. de l'impr.") |
|||
#define MSG_PRINT_ABORTED _UxGT("Impr. Annulée") |
|||
#define MSG_NO_MOVE _UxGT("Moteurs bloqués.") |
|||
#define MSG_KILLED _UxGT("MORT.") |
|||
#define MSG_STOPPED _UxGT("STOPPÉ.") |
|||
#define MSG_CONTROL_RETRACT _UxGT("Retraction mm") |
|||
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm") |
|||
#define MSG_CONTROL_RETRACTF _UxGT("Rétraction V") |
|||
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saut Z mm") |
|||
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") |
|||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. UnRet mm") |
|||
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") |
|||
#define MSG_AUTORETRACT _UxGT("Rétract. Auto.") |
|||
#define MSG_FILAMENTCHANGE _UxGT("Changer filament") |
|||
#define MSG_INIT_SDCARD _UxGT("Init. la carte SD") |
|||
#define MSG_CNG_SDCARD _UxGT("Changer de carte") |
|||
#define MSG_ZPROBE_OUT _UxGT("Z sonde extè. lit") |
|||
#define MSG_BLTOUCH _UxGT("BLTouch") |
|||
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") |
|||
#define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") |
|||
#define MSG_BLTOUCH_DEPLOY _UxGT("Déployer BLTouch") |
|||
#define MSG_BLTOUCH_STOW _UxGT("Ranger BLTouch") |
|||
#define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|||
#define MSG_FIRST _UxGT("Premier") |
|||
#define MSG_ZPROBE_ZOFFSET _UxGT("Décalage Z") |
|||
#define MSG_BABYSTEP_X _UxGT("Babystep X") |
|||
#define MSG_BABYSTEP_Y _UxGT("Babystep Y") |
|||
#define MSG_BABYSTEP_Z _UxGT("Babystep Z") |
|||
#define MSG_ENDSTOP_ABORT _UxGT("Butée abandon") |
|||
#define MSG_HEATING_FAILED_LCD _UxGT("Erreur de chauffe") |
|||
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP. REDONDANT") |
|||
#define MSG_THERMAL_RUNAWAY _UxGT("EMBALLEMENT THERM.") |
|||
#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP. MAX") |
|||
#define MSG_ERR_MINTEMP _UxGT("Err: TEMP. MIN") |
|||
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP. MAX LIT") |
|||
#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP. MIN LIT") |
|||
#define MSG_ERR_Z_HOMING _UxGT("G28 Z interdit") |
|||
|
|||
#define MSG_HALTED _UxGT("IMPR. STOPPÉE") |
|||
#define MSG_PLEASE_RESET _UxGT("RaZ. SVP") |
|||
#define MSG_SHORT_DAY _UxGT("j") // One character only
|
|||
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
|||
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
|||
|
|||
#define MSG_HEATING _UxGT("En chauffe...") |
|||
#define MSG_HEATING_COMPLETE _UxGT("Chauffe terminée") |
|||
#define MSG_BED_HEATING _UxGT("Lit en chauffe..") |
|||
#define MSG_BED_DONE _UxGT("Chauffe lit terminée") |
|||
#define MSG_DELTA_CALIBRATE _UxGT("Calibration Delta") |
|||
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrer X") |
|||
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y") |
|||
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z") |
|||
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre") |
|||
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto") |
|||
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta") |
|||
|
|||
#define MSG_INFO_MENU _UxGT("Infos imprimante") |
|||
#define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") |
|||
#define MSG_3POINT_LEVELING _UxGT("Niveau à 3 points") |
|||
#define MSG_LINEAR_LEVELING _UxGT("Niveau linéaire") |
|||
#define MSG_BILINEAR_LEVELING _UxGT("Niveau bilinéaire") |
|||
#define MSG_UBL_LEVELING _UxGT("Niveau lit unifié") |
|||
#define MSG_MESH_LEVELING _UxGT("Niveau maillage") |
|||
#define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante") |
|||
#define MSG_INFO_BOARD_MENU _UxGT("Infos carte") |
|||
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") |
|||
#define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs") |
|||
#define MSG_INFO_BAUDRATE _UxGT("Baud") |
|||
#define MSG_INFO_PROTOCOL _UxGT("Protocole") |
|||
#define MSG_CASE_LIGHT _UxGT("Lumière caisson") |
|||
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosité") |
|||
|
|||
#if LCD_WIDTH >= 20 |
|||
#define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions") |
|||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées") |
|||
#define MSG_INFO_PRINT_TIME _UxGT("Tps impr. total") |
|||
#define MSG_INFO_PRINT_LONGEST _UxGT("Impr. la + longue") |
|||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Total filament") |
|||
#else |
|||
#define MSG_INFO_PRINT_COUNT _UxGT("Impressions") |
|||
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées") |
|||
#define MSG_INFO_PRINT_TIME _UxGT("Total") |
|||
#define MSG_INFO_PRINT_LONGEST _UxGT("+ long") |
|||
#define MSG_INFO_PRINT_FILAMENT _UxGT("Filament") |
|||
#endif |
|||
|
|||
#define MSG_INFO_MIN_TEMP _UxGT("Temp Min") |
|||
#define MSG_INFO_MAX_TEMP _UxGT("Temp Max") |
|||
#define MSG_INFO_PSU _UxGT("Alimentation") |
|||
#define MSG_DRIVE_STRENGTH _UxGT("Puiss. moteur ") |
|||
#define MSG_DAC_PERCENT _UxGT("Driver %") |
|||
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.") |
|||
|
|||
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") |
|||
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") |
|||
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("+ extrusion") |
|||
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.") |
|||
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("La temp. minimum est ") |
|||
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ") |
|||
|
|||
#if LCD_HEIGHT >= 4 |
|||
// Up to 3 lines allowed
|
|||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Démarrage") |
|||
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") |
|||
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") |
|||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("attente de") |
|||
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("décharger filament") |
|||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("insérer filament") |
|||
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") |
|||
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") |
|||
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") |
|||
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") |
|||
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") |
|||
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") |
|||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de") |
|||
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament") |
|||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("attente de") |
|||
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion filament") |
|||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression") |
|||
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") |
|||
#else // LCD_HEIGHT < 4
|
|||
// Up to 2 lines allowed
|
|||
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patientez...") |
|||
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...") |
|||
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer et clic") |
|||
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...") |
|||
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusion...") |
|||
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...") |
|||
#endif // LCD_HEIGHT < 4
|
|||
|
|||
#endif // LANGUAGE_FR_H
|
|||
Loading…
Reference in new issue