Clean up excess whitespace

8 years ago · f713f25fa5
9 changed files with 24 additions and 24 deletions
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@ -5280,7 +5280,7 @@ void home_all_axes() { gcode_G28(true); }
      #if DISABLED(PROBE_MANUALLY)
        home_offset[Z_AXIS] -= probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height
      #endif
-      
+
      do {

        float z_at_pt[13] = { 0.0 };
@ -5380,7 +5380,7 @@ void home_all_axes() { gcode_G28(true); }
          #if ENABLED(PROBE_MANUALLY)
            test_precision = 0.00; // forced end
          #endif
-          
+
          switch (probe_points) {
            case 1:
              test_precision = 0.00; // forced end
@ -6259,7 +6259,7 @@ inline void gcode_M17() {
  inline void gcode_M23() {
    // Simplify3D includes the size, so zero out all spaces (#7227)
    for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
-    card.openFile(parser.string_arg, true); 
+    card.openFile(parser.string_arg, true);
  }

  /**
@ -12877,7 +12877,7 @@ void kill(const char* lcd_msg) {
  #if defined(ACTION_ON_KILL)
    SERIAL_ECHOLNPGM("//action:" ACTION_ON_KILL);
  #endif
-  
+
  #if HAS_POWER_SWITCH
    SET_INPUT(PS_ON_PIN);
  #endif
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@ -497,7 +497,7 @@

  // Horizontal distance bridged by diagonal push rods when effector is centered.
  #define DELTA_RADIUS 101.0 //mm  Get this value from auto calibrate
-  
+
  // Trim adjustments for individual towers
  // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  // measured in degrees anticlockwise looking from above the printer
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@ -497,7 +497,7 @@

  // Horizontal distance bridged by diagonal push rods when effector is centered.
  #define DELTA_RADIUS 101.0 //mm  Get this value from auto calibrate
-  
+
  // Trim adjustments for individual towers
  // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  // measured in degrees anticlockwise looking from above the printer
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -487,7 +487,7 @@

  // Horizontal distance bridged by diagonal push rods when effector is centered.
  #define DELTA_RADIUS 124.0 //mm  Get this value from auto calibrate
-  
+
  // Trim adjustments for individual towers
  // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  // measured in degrees anticlockwise looking from above the printer
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -487,7 +487,7 @@

  // Horizontal distance bridged by diagonal push rods when effector is centered.
  #define DELTA_RADIUS 105.2 //mm  Get this value from auto calibrate
-  
+
  // Trim adjustments for individual towers
  // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  // measured in degrees anticlockwise looking from above the printer
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@ -473,7 +473,7 @@

  // Horizontal distance bridged by diagonal push rods when effector is centered.
  #define DELTA_RADIUS 152.357 //mm  Get this value from auto calibrate
-  
+
  // Trim adjustments for individual towers
  // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  // measured in degrees anticlockwise looking from above the printer
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -491,7 +491,7 @@

  // Horizontal distance bridged by diagonal push rods when effector is centered.
  #define DELTA_RADIUS 174.1 //mm  Get this value from auto calibrate
-  
+
  // Trim adjustments for individual towers
  // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  // measured in degrees anticlockwise looking from above the printer
--- a/Marlin/pins_PRINTRBOARD_REVF.h
+++ b/Marlin/pins_PRINTRBOARD_REVF.h
@ -32,9 +32,9 @@
 *
 *  Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
 *    Installation instructions are at the above URL.
- *    
+ *
 *    Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
- *    
+ *
 *    Note: With Teensyduino extension, the Arduino IDE will report 130048 bytes of program storage space available,
 *    but there is actually only 122880 bytes due to the larger DFU bootloader shipped by default on all Printrboard RevF.
 *
@ -99,8 +99,8 @@
 #define DAC_STEPPER_CURRENT

 // Set default drive strength percents if not already defined - X, Y, Z, E axis
-#ifndef DAC_MOTOR_CURRENT_DEFAULT 
-  #define DAC_MOTOR_CURRENT_DEFAULT { 70, 70, 50, 70 }    
+#ifndef DAC_MOTOR_CURRENT_DEFAULT
+  #define DAC_MOTOR_CURRENT_DEFAULT { 70, 70, 50, 70 }
 #endif

 // Number of channels available for DAC
@ -170,17 +170,17 @@

 #if ENABLED(MINIPANEL)
  #if ENABLED(USE_INTERNAL_SD)
-    //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN# 
-    #define SDSS               20  //        10               B0  
+    //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#
+    #define SDSS               20  //        10               B0
    #define SD_DETECT_PIN      -1  // no auto-detect SD insertion on built-in Printrboard SD reader
  #else
-    //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#  Printrboard RevF Conn.   MKSLCD12864 PIN#  
+    //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#  Printrboard RevF Conn.   MKSLCD12864 PIN#
    #define SDSS               11  //        36               C1                EXP2-13             EXP2-07
    #define SD_DETECT_PIN       9  //        34               E1                EXP2-11             EXP2-04
  #endif
-  
-    //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#  Printrboard RevF Conn.   MKSLCD12864 PIN#  
-    #define DOGLCD_A0           4  //        29               D4                EXP2-05             EXP1-04      
+
+    //      PIN       FASTIO PIN#  ATUSB90 PIN# Teensy2.0++ PIN#  Printrboard RevF Conn.   MKSLCD12864 PIN#
+    #define DOGLCD_A0           4  //        29               D4                EXP2-05             EXP1-04
    #define DOGLCD_CS           5  //        30               D5                EXP2-06             EXP1-05
    #define BTN_ENC             6  //        31               D6                EXP2-07             EXP1-09
    #define BEEPER_PIN          7  //        32               D7                EXP2-08             EXP1-10
@ -190,8 +190,8 @@
  //#define LCD_BACKLIGHT_PIN  43  //        56               F5                EXP1-12     Not Implemented
  //#define SCK                21  //        11               B1                ICSP-04             EXP2-09
  //#define MOSI               22  //        12               B2                ICSP-03             EXP2-05
-  //#define MISO               23  //        13               B3                ICSP-06             EXP2-05            
-  
+  //#define MISO               23  //        13               B3                ICSP-06             EXP2-05
+
  // encoder connections present
  #define BLEN_A 0
  #define BLEN_B 1
--- a/buildroot/share/git/mfup
+++ b/buildroot/share/git/mfup
@ -2,10 +2,10 @@
 #
 # mfup
 #
-# - Fetch latest upstream and replace the PR Target branch with 
+# - Fetch latest upstream and replace the PR Target branch with
 # - Rebase the (current or specified) branch on the PR Target
 # - Force-push the branch to 'origin'
-# - 
+# -
 #

 [[ $# < 2 ]] || { echo "Usage: `basename $0` [branch]" 1>&2 ; exit 1; }