Roxy-3D
03b01e2500
Folger Tech i3-2020 now defaults to 2 Max7219 units
6 years ago
Roxy-3D
db85ca93c4
Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's
6 years ago
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 ( #11285 )
* Add Multi Unit Support for Max7219 to bugfix_2.0.0
* Apply multi-MAX7219 to example configs
* Tweak some spacing, macros
6 years ago
Scott Lahteine
39c8aed8ba
Add MANUAL_PROBE_START_Z to example configs
6 years ago
Scott Lahteine
2106fa26b1
Add MANUAL_PROBE_START_Z for manual probing
6 years ago
Scott Lahteine
17ed0f815c
Fix tool_change call in UBL G29
Fix #11279 , #11252
6 years ago
Scott Lahteine
6d2aff03bd
Merge pull request #11306 from thinkyhead/bf2_power_loss_pin
[2.0.x] Add support for power loss detect pin
6 years ago
Scott Lahteine
63a146d424
planner.synchronize at start of tool_change
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
6 years ago
Scott Lahteine
665ac1e4d0
Add POWER_LOSS_PIN support
6 years ago
Scott Lahteine
2243f72523
Add POWER_LOSS_PIN to example configs
6 years ago
Chris Pepper
47d5fcbbcc
[2.0.x] Change MKS SBASE default serial port to avoid confusion ( #11301 )
6 years ago
Scott Lahteine
c83109c0ae
Merge pull request #11238 from xC0000005/MalyanLCDUpdate
[2.0.x] Malyan LCD Feedrate + Better Temp Handling
6 years ago
Scott Lahteine
64f007580b
Fix some header comments
6 years ago
Giuliano
aed1d17a2d
Initialize default units ( #11295 )
When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.
6 years ago
Scott Lahteine
8c40f0c6c7
Reduce TQ message code size
6 years ago
xC0000005
b04e0c0cbb
Malyan LCD feedrate, better temp handling.
6 years ago
Scott Lahteine
065e9c3d66
Add card.longest_filename method
6 years ago
Roxy-3D
71df1f7f57
Don't display M421 information for UBL at startup
It takes too long to display the mesh data for large mesh's at startup. We should consider ways to speed this up.
Perhaps it makes sense to display an entire row of the mesh instead of just one mesh point?
6 years ago
Roxy-3D
902167fa78
Revert "[2.0.x] Switch to PIO managed L6470 library ( #11288 )" ( #11290 )
This reverts commit a26fdf6b68
.
6 years ago
Shen Yiming
a26fdf6b68
[2.0.x] Switch to PIO managed L6470 library ( #11288 )
On a leap of faith... I'm merging...
6 years ago
Scott Lahteine
be7d1dfb3c
Merge pull request #11267 from teemuatlut/bf2_lpc_spi
[2.0.x] LPC1768: Expand hardware SPI class
6 years ago
Giuliano
8f686aa449
[2.0.x] Fix change filament crash ( #11269 )
Prevent crash, on filament change, when printer is not homed
6 years ago
teemuatlut
f38c81cdde
LPC176x: Expand HW SPI class
7 years ago
teemuatlut
3b5dec4b13
Add new LPC include folder
6 years ago
Chris Pepper
c43793aa1e
Update Travis Tests to run platforms in parallel ( #11256 )
6 years ago
Scott Lahteine
e486326910
Vellemann K8400 Y bed size is 180
Co-Authored-By: kaimimue <kaimimue@users.noreply.github.com>
6 years ago
Giuliano
e5ea9d200f
[2.0.x] fix kill printer ( #11260 )
This will fix kill message on dual printer with 0 alignment offset
6 years ago
Jamie Bainbridge
8c57cadbe7
Include stdlib in fontutils ( #11251 )
When `REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER` is defined and Re-ARM build is attempted, `u8g_fontutf8.cpp` includes `fontutils.h` which uses `abs()`.
However, `abs()` is defined in `stdlib.h` which is not included in `fontutils.h`, so compile fails with an error.
Include `stdlib.h` in `fontutils.h` so that `abs()` is defined before `u8g_fontutf8.cpp` needs to use it, resolving the compile error.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
6 years ago
Scott Lahteine
fed68f29af
Merge pull request #11257 from thinkyhead/bf2_misc_fixes_jun19
[2.0.x] Shorter Z raise between multiple probes
6 years ago
Scott Lahteine
bf7d0ba859
Assert that XY probe offsets are integers
6 years ago
Scott Lahteine
12854f1909
Add Z_CLEARANCE_MULTI_PROBE to example configs
Co-Authored-By: nightgryphon <ngryph@gmail.com>
6 years ago
Scott Lahteine
25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
Co-Authored-By: nightgryphon <ngryph@gmail.com>
6 years ago
Scott Lahteine
fd8a76493b
Unify M91x parameter I meaning, simplify reports ( #11249 )
6 years ago
Scott Lahteine
c8d24a6412
Add Sublime G-code (RepRap) syntax
6 years ago
Scott Lahteine
566d05006d
report_state > event_handler
Make the endstop report method track endstop changes on its own.
6 years ago
Scott Lahteine
6b521b6df2
Loosen thermistor table size limit
Co-Authored-By: Aaron Griffith <aargri@gmail.com>
6 years ago
Scott Lahteine
20761b88e0
Merge pull request #11212 from AlexanderAmelkin/2.0-HD44780-remove-unused-include
[2.0.x][HD44780] Remove unused include
6 years ago
Roxy-3D
603e136e87
Resolve issue where user can't edit UBL's mesh
6 years ago
Scott Lahteine
03fa05ab59
Travis CI test STM32F1 with HD44780
6 years ago
Alexander Amelkin
ed720194d2
[2.0.x][HD44780] Remove unused include
The <binary.h> header is not available in STM32 toolchain
and is not used anywhere in ultralcd_common_HD44780.h.
If it is used anywhere in HD44780 support for other platforms,
it must be included in the corresponding .cpp file directly
and put under appropriate conditional compilation directives
for the platform requiring it.
As I was unable to find such code, I consider the file unused
and hence remove the inclusion.
6 years ago
Scott Lahteine
d05e832f29
Add STM32F1 support for SD-based EEPROM
6 years ago
Scott Lahteine
63f4c9bdb9
Followup to float maths patch
6 years ago
Scott Lahteine
b143441251
Test CR-10S with status and bootscreen
Also fix use_example_configs
6 years ago
Scott Lahteine
dde009efdf
Merge pull request #11178 from ejtagle/misc-fixes
[2.0.x] Use 'float' instead of 'double' maths
6 years ago
Scott Lahteine
2992112da0
Optimize delta kinematics
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
6 years ago
etagle
1367df2875
Replace double with float, optimize calculation
6 years ago
Scott Lahteine
d960d448fa
Optimize calculations with LROUND
6 years ago
Scott Lahteine
68e6650df7
Remove Quake Fast Inverse SQRT (it isn't faster)
6 years ago
etagle
e7e896e7d7
More tweaks to fastio_Due.h
6 years ago
Chris Pepper
55f4744e54
[LPC176x] Endstop Interrupts Feature ( #11202 )
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
6 years ago