Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Eduardo José Tagle	57a899a412	[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373 )	7 years ago
Scott Lahteine	5676b187b4	Move etc/udev to buildroot/etc Followup to #10375. This is the appropriate place for any system etc folder additions.	7 years ago
Bob-the-Kuhn	44a03ecfc9	Add Linux compatibility for Arduino boards (#10375 )	7 years ago
Bob-the-Kuhn	85014cd132	[2.0.x] LPC1768 - automatic selection of upload disk (#10374 )	7 years ago
Scott Lahteine	8669dba5e6	Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration [2.0.x] Filament load/unload add acceleration for Bowden	7 years ago
Scott Lahteine	472ab0cc24	Tweak RAMPS SDSS pins	7 years ago
LichtiMC	b94c8defee	Provide additional information about SMART-RAMPS board (#10353 )	7 years ago
Scott Lahteine	6f8e228880	Add RESET_PIN to pins_RAMPS_SMART.h	7 years ago
Sean	2d9b0a66fe	Add Filament Change accelerations	7 years ago
Scott Lahteine	71d3523254	Add Filament Change accelerations to example configs	7 years ago
Scott Lahteine	dcb1f1f452	Merge pull request #10351 from thinkyhead/bf2_z_probe_low_point [2.0.x] Z_PROBE_LOW_POINT to prevent probe/bed damage	7 years ago
Scott Lahteine	8b8ad14178	Add Z_PROBE_LOW_POINT to prevent damage	7 years ago
Scott Lahteine	82dafbba33	Add Z_PROBE_LOW_POINT to example configs	7 years ago
Roxy-3D	a731a723e8	Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER	7 years ago
Roxy-3D	26cc12eaa4	Resolve corruption of Max7219 Debug LED Matrix	7 years ago
Scott Lahteine	72c15a5cc9	Add --no-track to mfnew git script	7 years ago
Scott Lahteine	dca69efc11	Update Bed PID comments	7 years ago
Scott Lahteine	56486c5c0e	Apply const to manage_inactivity	7 years ago
Scott Lahteine	a6485456df	Fix LIGHTWEIGHT_UI with UBL See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702	7 years ago
Scott Lahteine	e02fc4f1d6	Better RESTORE_LEVELING_AFTER_G28 sanity-check As suggested by @GMagician	7 years ago
Scott Lahteine	44a697ab04	Set STM32F1 TEMP_TIMER_FREQUENCY to 1K Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803	7 years ago
Scott Lahteine	cec6e19099	Add RepRapPro Huxley configuration Based on #10343 by @indazoo	7 years ago
Scott Lahteine	9ff4e9e1e6	Patch _IS_HW_SPI so defined() works	7 years ago
Scott Lahteine	cea398849e	Tweak to gcode_line_error/return	7 years ago
Scott Lahteine	4382f2124d	Merge pull request #10337 from ejtagle/bugfix-2.0.x [2.0.x] 6th-order jerk-controlled motion planning in real-time	7 years ago
etagle	a29adde5c0	Implement BEZIER_JERK_CONTROL Enable 6th-order jerk-controlled motion planning in real-time. Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)	7 years ago
Scott Lahteine	5932df7ea1	Add BEZIER_JERK_CONTROL to example configs	7 years ago
Scott Lahteine	93524c1994	Merge pull request #10045 from Lenbok/2.0.x-monitor_chamber_temperature_and_auto_fan [2.0.x] Monitor chamber temperature, with auto fan control.	7 years ago
Lenbok	0e8242180d	Chamber temperature monitoring and auto fan control. This is an initial cut for feedback, updated for 2.0.x. Chamber temperature is currently reported along with hot end and bed temperatures to serial. The format is just like that used for hot end and bed temperatures, but using 'C' prefix. As there is no heater, target is always 0. Is this appropriate, is there a better way to report chamber temperatures? Chamber temperatures are not reported on the LCD in any way. When auto chamber fan is enabled, it currently just uses the same temperature threshold as the other auto controlled fans. As the chamber temperature is not connected to any heater, it doesn't undergo mintemp/maxtemp monitoring. This would need to change in the future if chamber heating became a feature.	7 years ago
Scott Lahteine	5b3bda1c16	Add Chamber Temp options to example configs	7 years ago
Bob-the-Kuhn	acda4ecb20	Fix DUE Trinamic SW/HW SPI sanity check (#10336 )	7 years ago
Bob-the-Kuhn	ab715c70d1	TMC SPI sanity-check and pins debugging (#10324 )	7 years ago
Scott Lahteine	4dc7e64789	Update Slovak language Based on #10313 by @rmoravcik	7 years ago
Scott Lahteine	0dccf9ea6a	Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130 [2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro	7 years ago
Marcio Teixeira	2efc072fdb	Clear progress bar on completion (#10333 ) Fix #10330	7 years ago
GMagician	6ce060cfe0	[2.0.x] Update language_it.h (#10322 ) Updated to #10296	7 years ago
Marcio Teixeira	9356cf648f	Added support for Einsy Retro http://reprap.org/wiki/EinsyRetro	7 years ago
Marcio Teixeira	75037493fa	Default active low for TMC2130 DIAG1 (#10294 ) - Added sanity check to inform users to set the endstop to inverting when using SENSORLESS_HOMING	7 years ago
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	7 years ago
Scott Lahteine	051303ad42	Russian language updates From #10311 by @anton-piliugin	7 years ago
Scott Lahteine	386bc71d57	Merge pull request #10173 from noingwhat/2.0.x-Continuous-Purge [2.0.x] Continuous Purge	7 years ago
Sean	2fa0a73c2c	Implement filament change continuous purge	7 years ago
Scott Lahteine	d133ad61f3	Add continuous purge to example configs	7 years ago
Scott Lahteine	4b25543633	Backtrace formatting cleanup	7 years ago
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299 )	7 years ago
Scott Lahteine	1c36606886	Fix MSG_HEATING_FAILED_LCD_BED macro evaluation	7 years ago
Scott Lahteine	fe91514395	MBL should add z_offset regardless of fade (#10308 )	7 years ago
Marcio Teixeira	8bc93c6f2b	Improve heating/cooling LCD messages (#10293 )	7 years ago
GMagician	21a47b50f4	Additional tool-change fixes (#10304 ) Followup to #10257	7 years ago
Scott Lahteine	e6042a7c52	Tweak platformio debug_server options	7 years ago

1 2 3 4 5 ...

10180 Commits (57a899a412b0d45c159423925c1f63164dcd9308) All Branches Search

10180 Commits (57a899a412b0d45c159423925c1f63164dcd9308)

All Branches