Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	12 years ago
Mark Finn	d197f8504b	clean up and changes from testing	12 years ago
Mark Finn	eb06a886c4	missed	12 years ago
Mark Finn	04631d2250	cleanup for pull	12 years ago
Mark Finn	9698f4ea64	bed pid Conflicts: Marlin/Configuration.h	12 years ago
ZetaPhoenix	e8c92e0a95	Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)	12 years ago
Dabble63	6b45e9f167	Add Duty Cycling to the Heater Bed	12 years ago
Erik van der Zalm	e31bef31ad	Limit PID autotune PWM to PID_MAX	13 years ago
Erik van der Zalm	1874cb71a6	Added option to increase the FAN PWM frequency.	13 years ago
Logan Bowers	3eacb4c16d	Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater	13 years ago
Bernhard	33bb044d7c	fixed catsting to (int)e in serial error messages. see https://github.com/ErikZalm/Marlin/issues/148	13 years ago
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	13 years ago
Erik van der Zalm	8aee9d51b6	Disabled disable_heater in PID_autotune.	13 years ago
Daid	414408b2d0	Fix for wrong systax in #ifdef.	13 years ago
Erik van der Zalm	cf7c8c458f	Fixed MAX6675	13 years ago
Erik van der Zalm	63aec3c56e	Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp	13 years ago
Erik van der Zalm	33f5697888	PPID tune exports more constants.	13 years ago
Erik van der Zalm	15ad923310	Removed !!!. Stupid arduino bootloader can't handle this.	13 years ago
Erik van der Zalm	c077316b2b	Added PID autotune. (experimental) M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed. Put these values in Configuration.h	13 years ago
haxar	79a466ca26	make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, complementing changes to analog2temp in `d15f01e`	13 years ago
Erik van der Zalm	b48d67ce10	Fixed homing	13 years ago
Phil Hord	740f0c7690	Add explicit #define for bogus temp override The code to ignore the "bad thermistor reading failsafe" suicide function depends on the existing of the PS_ON pin feature. But in some boards this shouldn't be the case Fix this by adding an explicit definition to make our intentions more clear and separable.	13 years ago
Daid	73344e69c1	Added temperature offset/gain settings for AD595.	13 years ago
Christian Thalhammer	14702089ee	-disable TEMP Min MAX Kill while using PS_ON Pin ON GEN7 there is no temperature reading when power is off.. so Marlin would kill itself. There seems to be an update from "Traumflug" on GEN7 using standby VCC for thermistors.	13 years ago
Erik van der Zalm	9f139d6e0e	Added MAX6675 support. (Thanks to gregfrost) Needs some work to remove the blocking in read max6675.	13 years ago
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	13 years ago
Bernhard	3c1a4aac2b	header file simplification	13 years ago
Bernhard	415aadf704	lcd panel bed support advance and ultipanel not any more in default config	13 years ago
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit `651cde8b98`.	13 years ago
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 years ago
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 years ago
Bernhard	88ee053af0	heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.	13 years ago
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 years ago
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 years ago
Bernhard	59205ac5fc	preliminiary implementation for the early heating finish. Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed. its kind of not so cool, because you need 6 more ints. Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways. Then it would be much easier. to have the offsets without additional variables.	13 years ago
Erik van der Zalm	dd5296ad4d	Fixed temperature reading bug. (When using the lower and upper adc input bank)	13 years ago
Erik van der Zalm	959d82e81e	Small temperature disable bug.	13 years ago
Erik van der Zalm	2e43f9c809	Changed min max temperature code.	13 years ago
Erik van der Zalm	6841a10446	Fixed max/min temperature bug	13 years ago
Erik van der Zalm	ff69e0a772	Changed max/min temp init. Removed second uart from sabguino core	13 years ago
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	13 years ago
Erik van der Zalm	331e82dcd3	Buffer size > 16	13 years ago
Bernhard Kubicek	c57906b627	fixed bug with adjusting ki in realtime.	13 years ago
Erik van der Zalm	65934eee9c	A lot of changes in the planner code	13 years ago
Bernhard Kubicek	ff592b056a	heater power repair.	13 years ago
Bernhard Kubicek	e9adfa27b5	re-enabled heaterpower as storage for the current storage of the heater PWM duty cycle. the M301 now returns the current PID settings of the machine. M105 returns heating pwm duty cylce as "@:"	13 years ago
Bernhard Kubicek	ba8a53a40f	Streaming.h is gone. It conflicted with PROGMEM. And saving memory is more important than nicer code, imho	13 years ago
Bernhard Kubicek	ab154d5592	project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.	13 years ago
Bernhard Kubicek	72ace55e6a	better visibility of public/private/imported variables	13 years ago
Erik van der Zalm	e3af73ee0c	Thermistor name problem	13 years ago

1 2

65 Commits (36b452c7ac88e360e0c3c7555eaea46dd27271f1)