andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

solved some compiler warnings that are now visible in arduino 1.0. 

Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
pull/1/head
Bernhard 13 years ago
parent
dfd240b260
commit
7714b98da7
13 changed files with 63 additions and 38 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 21
      Marlin/Marlin.h
  2. 3
      Marlin/Marlin.pde
  3. 1
      Marlin/MarlinSerial.cpp
  4. 2
      Marlin/MarlinSerial.h
  5. 2
      Marlin/cardreader.h
  6. 2
      Marlin/cardreader.pde
  7. 23
      Marlin/planner.cpp
  8. 7
      Marlin/stepper.cpp
  9. 2
      Marlin/stepper.h
  10. 19
      Marlin/temperature.cpp
  11. 8
      Marlin/temperature.h
  12. 5
      Marlin/ultralcd.h
  13. 6
      Marlin/ultralcd.pde

21
Marlin/Marlin.h
View File

@ -16,7 +16,6 @@
#include "Configuration.h"
#include "MarlinSerial.h"
#define FORCE_INLINE __attribute__((always_inline)) inline
//#define SERIAL_ECHO(x) Serial << "echo: " << x;
//#define SERIAL_ECHOLN(x) Serial << "echo: "<<x<<endl;
@ -25,15 +24,25 @@
//#define SERIAL_PROTOCOL(x) Serial << x;
//#define SERIAL_PROTOCOLLN(x) Serial << x<<endl;
//this is a unfinsihed attemp to removes a lot of warning messages, see:
// http://www.avrfreaks.net/index.php?name=PNphpBB2&file=printview&t=57011
//typedef char prog_char PROGMEM;
// //#define PSTR (s ) ((const PROGMEM char *)(s))
// //# define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];}))
// //#define MYPGM(s) ((const prog_char *g PROGMEM=s))
// //#define MYPGM(s) PSTR(s)
#define MYPGM(s) (__extension__({static char __c[] __attribute__((__progmem__)) = (s); &__c[0];})) //This is the normal behaviour
//#define MYPGM(s) (__extension__({static prog_char __c[] = (s); &__c[0];})) //this does not work but hides the warnings
#define SERIAL_PROTOCOL(x) MSerial.print(x);
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x));
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(MYPGM(x));
#define SERIAL_PROTOCOLLN(x) {MSerial.print(x);MSerial.write('\n');}
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(PSTR(x));MSerial.write('\n');}
#define SERIAL_PROTOCOLLNPGM(x) {serialprintPGM(MYPGM(x));MSerial.write('\n');}
const char errormagic[] PROGMEM ="Error:";
const char echomagic[] PROGMEM ="echo:";
const prog_char errormagic[] PROGMEM ="Error:";
const prog_char echomagic[] PROGMEM ="echo:";
#define SERIAL_ERROR_START serialprintPGM(errormagic);
#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
@ -50,7 +59,7 @@ const char echomagic[] PROGMEM ="echo:";
//things to write to serial from Programmemory. saves 400 to 2k of RAM.
#define SerialprintPGM(x) serialprintPGM(PSTR(x))
#define SerialprintPGM(x) serialprintPGM(MYPGM(x))
FORCE_INLINE void serialprintPGM(const char *str)
{
char ch=pgm_read_byte(str);

3
Marlin/Marlin.pde
View File

@ -167,7 +167,8 @@ static char *strchr_pointer; // just a pointer to find chars in the cmd string l
const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
static float tt = 0, bt = 0;
//static float tt = 0;
//static float bt = 0;
//Inactivity shutdown variables
static unsigned long previous_millis_cmd = 0;

1
Marlin/MarlinSerial.cpp
View File

@ -20,6 +20,7 @@
Modified 28 September 2010 by Mark Sproul
*/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>

2
Marlin/MarlinSerial.h
View File

@ -120,7 +120,7 @@ class MarlinSerial //: public Stream
FORCE_INLINE void print(const String &s)
{
for (int i = 0; i < s.length(); i++) {
for (int i = 0; i < (int)s.length(); i++) {
write(s[i]);
}
}

2
Marlin/cardreader.h
View File

@ -59,7 +59,7 @@ private:
LsAction lsAction; //stored for recursion.
int16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
char* diveDirName;
void lsDive(char *prepend,SdFile parent);
void lsDive(const char *prepend,SdFile parent);
};

2
Marlin/cardreader.pde
View File

@ -40,7 +40,7 @@ char *createFilename(char *buffer,const dir_t &p) //buffer>12characters
}
void CardReader::lsDive(char *prepend,SdFile parent)
void CardReader::lsDive(const char *prepend,SdFile parent)
{
dir_t p;
uint8_t cnt=0;

23
Marlin/planner.cpp
View File

@ -107,10 +107,12 @@ volatile unsigned char block_buffer_tail; // Index of the block to pro
//=============================private variables ============================
//===========================================================================
// Used for the frequency limit
static unsigned char old_direction_bits = 0; // Old direction bits. Used for speed calculations
static long x_segment_time[3]={0,0,0}; // Segment times (in us). Used for speed calculations
static long y_segment_time[3]={0,0,0};
#ifdef XY_FREQUENCY_LIMIT
// Used for the frequency limit
static unsigned char old_direction_bits = 0; // Old direction bits. Used for speed calculations
static long x_segment_time[3]={0,0,0}; // Segment times (in us). Used for speed calculations
static long y_segment_time[3]={0,0,0};
#endif
// Returns the index of the next block in the ring buffer
// NOTE: Removed modulo (%) operator, which uses an expensive divide and multiplication.
@ -255,7 +257,7 @@ void planner_reverse_pass_kernel(block_t *previous, block_t *current, block_t *n
// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This
// implements the reverse pass.
void planner_reverse_pass() {
char block_index = block_buffer_head;
uint8_t block_index = block_buffer_head;
if(((block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1)) > 3) {
block_index = (block_buffer_head - 3) & (BLOCK_BUFFER_SIZE - 1);
block_t *block[3] = { NULL, NULL, NULL };
@ -294,7 +296,7 @@ void planner_forward_pass_kernel(block_t *previous, block_t *current, block_t *n
// planner_recalculate() needs to go over the current plan twice. Once in reverse and once forward. This
// implements the forward pass.
void planner_forward_pass() {
char block_index = block_buffer_tail;
uint8_t block_index = block_buffer_tail;
block_t *block[3] = { NULL, NULL, NULL };
while(block_index != block_buffer_head) {
@ -384,7 +386,7 @@ void getHighESpeed()
return; //do nothing
float high=0;
char block_index = block_buffer_tail;
uint8_t block_index = block_buffer_tail;
while(block_index != block_buffer_head) {
float se=block_buffer[block_index].steps_e/float(block_buffer[block_index].step_event_count)*block_buffer[block_index].nominal_rate;
@ -423,7 +425,7 @@ void check_axes_activity() {
block_t *block;
if(block_buffer_tail != block_buffer_head) {
char block_index = block_buffer_tail;
uint8_t block_index = block_buffer_tail;
while(block_index != block_buffer_head) {
block = &block_buffer[block_index];
if(block->steps_x != 0) x_active++;
@ -519,8 +521,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
block->nominal_speed = block->millimeters * inverse_second; // (mm/sec) Always > 0
block->nominal_rate = ceil(block->step_event_count * inverse_second); // (step/sec) Always > 0
// segment time im micro seconds
long segment_time = lround(1000000.0/inverse_second);
if (block->steps_e == 0) {
@ -538,6 +539,8 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
#endif
/*
// segment time im micro seconds
long segment_time = lround(1000000.0/inverse_second);
if ((blockcount>0) && (blockcount < (BLOCK_BUFFER_SIZE - 4))) {
if (segment_time<minsegmenttime) { // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more.
segment_time=segment_time+lround(2*(minsegmenttime-segment_time)/blockcount);

7
Marlin/stepper.cpp
View File

@ -21,6 +21,7 @@
/* The timer calculations of this module informed by the 'RepRap cartesian firmware' by Zack Smith
and Philipp Tiefenbacher. */
#include "stepper.h"
#include "Configuration.h"
#include "Marlin.h"
@ -444,7 +445,7 @@ ISR(TIMER1_COMPA_vect)
// Calculare new timer value
unsigned short timer;
unsigned short step_rate;
if (step_events_completed <= current_block->accelerate_until) {
if (step_events_completed <= (unsigned long int)current_block->accelerate_until) {
MultiU24X24toH16(acc_step_rate, acceleration_time, current_block->acceleration_rate);
acc_step_rate += current_block->initial_rate;
@ -463,7 +464,7 @@ ISR(TIMER1_COMPA_vect)
}
#endif
}
else if (step_events_completed > current_block->decelerate_after) {
else if (step_events_completed > (unsigned long int)current_block->decelerate_after) {
MultiU24X24toH16(step_rate, deceleration_time, current_block->acceleration_rate);
if(step_rate > acc_step_rate) { // Check step_rate stays positive
@ -678,7 +679,7 @@ void st_set_e_position(const long &e)
CRITICAL_SECTION_END;
}
long st_get_position(char axis)
long st_get_position(uint8_t axis)
{
long count_pos;
CRITICAL_SECTION_START;

2
Marlin/stepper.h
View File

@ -34,7 +34,7 @@ void st_set_position(const long &x, const long &y, const long &z, const long &e)
void st_set_e_position(const long &e);
// Get current position in steps
long st_get_position(char axis);
long st_get_position(uint8_t axis);
// The stepper subsystem goes to sleep when it runs out of things to execute. Call this
// to notify the subsystem that it is time to go to work.

19
Marlin/temperature.cpp
View File

@ -67,7 +67,8 @@ int heatingtarget_raw[3]= {0, 0, 0};
//===========================================================================
static bool temp_meas_ready = false;
static unsigned long previous_millis_heater, previous_millis_bed_heater;
static unsigned long previous_millis_bed_heater;
//static unsigned long previous_millis_heater;
#ifdef PIDTEMP
//static cannot be external:
@ -80,8 +81,8 @@ static unsigned long previous_millis_heater, previous_millis_bed_heater;
static float pid_error;
static float temp_iState_min;
static float temp_iState_max;
static float pid_input;
static float pid_output;
// static float pid_input;
// static float pid_output;
static bool pid_reset;
#endif //PIDTEMP
@ -94,8 +95,8 @@ static unsigned long previous_millis_heater, previous_millis_bed_heater;
// Init min and max temp with extreme values to prevent false errors during startup
static int minttemp_0 = 0;
static int maxttemp_0 = 16383;
static int minttemp_1 = 0;
static int maxttemp_1 = 16383;
//static int minttemp_1 = 0;
//static int maxttemp_1 = 16383;
static int bed_minttemp = 0;
static int bed_maxttemp = 16383;
@ -268,7 +269,10 @@ int temp2analogBed(int celsius) {
return (1023 * OVERSAMPLENR) - raw;
#elif defined BED_USES_AD595
return lround(celsius * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) );
#else
#warning No heater-type defined for the bed.
#endif
return 0;
}
// Derived from RepRap FiveD extruder::getTemperature()
@ -296,6 +300,8 @@ float analog2temp(int raw) {
return celsius;
#elif defined HEATER_0_USES_AD595
return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR;
#else
#error PLEASE DEFINE HEATER TYPE
#endif
}
@ -328,7 +334,10 @@ float analog2tempBed(int raw) {
#elif defined BED_USES_AD595
return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR;
#else
#warning No heater-type defined for the bed.
#endif
return 0;
}
void tp_init()

8
Marlin/temperature.h
View File

@ -86,7 +86,7 @@ FORCE_INLINE void setTargetHotend0(const float &celsius)
#endif //PIDTEMP
};
FORCE_INLINE void setTargetHotend1(const float &celsius) { target_raw[TEMPSENSOR_HOTEND_1]=temp2analog(celsius);};
FORCE_INLINE float setTargetHotend(const float &celcius, uint8_t extruder){
FORCE_INLINE void setTargetHotend(const float &celcius, uint8_t extruder){
if(extruder == 0) setTargetHotend0(celcius);
if(extruder == 1) setTargetHotend1(celcius);
};
@ -94,17 +94,19 @@ FORCE_INLINE void setTargetBed(const float &celsius) { target_raw[TEMPSENSO
FORCE_INLINE bool isHeatingHotend0() {return heatingtarget_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0];};
FORCE_INLINE bool isHeatingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] > current_raw[TEMPSENSOR_HOTEND_1];};
FORCE_INLINE float isHeatingHotend(uint8_t extruder){
FORCE_INLINE bool isHeatingHotend(uint8_t extruder){
if(extruder == 0) return heatingtarget_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0];
if(extruder == 1) return target_raw[TEMPSENSOR_HOTEND_1] > current_raw[TEMPSENSOR_HOTEND_1];
return false;
};
FORCE_INLINE bool isHeatingBed() {return target_raw[TEMPSENSOR_BED] > current_raw[TEMPSENSOR_BED];};
FORCE_INLINE bool isCoolingHotend0() {return target_raw[TEMPSENSOR_HOTEND_0] < current_raw[TEMPSENSOR_HOTEND_0];};
FORCE_INLINE bool isCoolingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];};
FORCE_INLINE float isCoolingHotend(uint8_t extruder){
FORCE_INLINE bool isCoolingHotend(uint8_t extruder){
if(extruder == 0) return target_raw[TEMPSENSOR_HOTEND_0] < current_raw[TEMPSENSOR_HOTEND_0];
if(extruder == 1) return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];
return false;
};
FORCE_INLINE bool isCoolingBed() {return target_raw[TEMPSENSOR_BED] < current_raw[TEMPSENSOR_BED];};

5
Marlin/ultralcd.h
View File

@ -1,7 +1,7 @@
#ifndef __ULTRALCDH
#define __ULTRALCDH
#include "Configuration.h"
#include "Marlin.h"
#ifdef ULTRA_LCD
void lcd_status();
@ -104,7 +104,6 @@
curencoderpos=maxlines*lcdslow;
}
lastencoderpos=encoderpos=curencoderpos;
int lastactiveline=activeline;
activeline=curencoderpos/lcdslow;
if(activeline<0) activeline=0;
if(activeline>LCD_HEIGHT-1) activeline=LCD_HEIGHT-1;
@ -137,7 +136,7 @@
#define LCD_MESSAGE(x) lcd_status(x);
#define LCD_MESSAGEPGM(x) lcd_statuspgm(PSTR(x));
#define LCD_MESSAGEPGM(x) lcd_statuspgm(MYPGM(x));
#define LCD_STATUS lcd_status()
#else //no lcd
#define LCD_STATUS

6
Marlin/ultralcd.pde
View File

@ -53,7 +53,7 @@ void lcdProgMemprint(const char *str)
ch=pgm_read_byte(++str);
}
}
#define lcdprintPGM(x) lcdProgMemprint(PSTR(x))
#define lcdprintPGM(x) lcdProgMemprint(MYPGM(x))
//===========================================================================
@ -159,8 +159,8 @@ void lcd_status()
{
#ifdef ULTIPANEL
static uint8_t oldbuttons=0;
static long previous_millis_buttons=0;
static long previous_lcdinit=0;
//static long previous_millis_buttons=0;
//static long previous_lcdinit=0;
// buttons_check(); // Done in temperature interrupt
//previous_millis_buttons=millis();

Write Preview
Loading…
Cancel
Save