3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
7 years ago
0067bb2840
Addressing #7552
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
7 years ago
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
7 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
7 years ago
b94a1c6b9f
Code reduction this some configurations
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
7 years ago
4817b39d98
Added new feature for AutoParking Extruder (APE)
7 years ago
30887feae3
Tweak some formatting in ABL G29
7 years ago
257b693ab0
Advanced pause fixes ( #7518 )
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
7 years ago
96ae53cf41
Use MOVE_SERVO macro where possible
7 years ago
ac76101ec3
Eliminate goto in gcode_M48
7 years ago
75e6ead5fd
Eliminate goto in gcode_G33
7 years ago
6bd63d27b5
Updates to G29 for probe error handling
7 years ago
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
7 years ago
0938c62b48
Neater position_is_reachable call
7 years ago
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
7 years ago
936d00dda8
Implement probing delay for piezo sensors
7 years ago
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
7 years ago
bfd396c13a
Patch to fix some compiler warnings
7 years ago
48c5f3dddf
Tweak kill action #ifdef
7 years ago
be7a9a07c5
Don't reset grid with `G29 Q` + PROBE_MANUALLY
7 years ago
4eff18854b
Rename options with swap_ prefix
7 years ago
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
7 years ago
9fc72422e4
Don't let the flow multiplier affect retract/recover length
7 years ago
fee696db5d
Improve retract() for G10/G11/autoretract
7 years ago
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
7 years ago
51864fd365
Add bed size as a configuration option
7 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
7 years ago
7afafb05b8
Split G10/G11 into separate functions
7 years ago
c45798694f
Add some more requirements to the G-code list
7 years ago
72de280c1e
BARICUDA valve pressure consistently uint8_t
7 years ago
4d98e3f0a7
General cleanup
7 years ago
e530c67349
Fixing SWITCHING_EXTRUDER feature
7 years ago
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
Without this... The LSF won't work because none of the sampled points
in this code block get added.
7 years ago
0873c667fa
Apply coding standards to recent merges
7 years ago
8c2907d10f
Fix ABL broken by recent change
7 years ago
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
7 years ago
4bc79ec877
Updates for G33-LCD interface
7 years ago
2065591daf
Add support for BQ heated bed kit with Hephestos 2
7 years ago
5ef1e5ef60
Tweaks for M43
7 years ago
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
7 years ago
f713f25fa5
Clean up excess whitespace
7 years ago
fc9ce65095
Add `BUSY_WHILE_HEATING` for hosts that need it
7 years ago
11c589c3ec
Fix compile issue with G38
Fixes #7250
7 years ago
678914be25
Patch M23 to work around Simplify3D bug
Addressing #7227
7 years ago
3efe4aeef8
Add PROBE_MANUALLY support to G33
7 years ago
c28749a567
Add kill action
Sends pre-defined string as action command when printer is kill.
7 years ago
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
7 years ago
567941e341
Fix for issues #6997 and #7152
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
7 years ago
6a3967ee33
Corrections for probe_pt parameters
7 years ago
Roxy-3D
GMagician
Scott Lahteine
Vben
Thomas Moore
Thomas Moore
Øystein Krog
teemuatlut
Wilfried Chauveau
Scott Lahteine
C. Scott Ananian
fixoid
LVD-AC
João Brázio
Ben Lye