587154c01b
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
12 years ago
529748894c
Minor changes in the temperature code for some cleanup.
12 years ago
6a9bee27cc
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
12 years ago
94ea26ff46
Some minor changes on code style. And a bugfix where the counters for positioning in the stepper where wrong depending on compiler settings. (Caused strange values to reported back with M114 and endstop triggers). Also fixed compiling with FWRETRACT enabled.
12 years ago
72586eb30a
Solved few warnings.
12 years ago
06b58a9c4f
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
12 years ago
d197f8504b
clean up and changes from testing
12 years ago
eb06a886c4
missed
12 years ago
04631d2250
cleanup for pull
12 years ago
9698f4ea64
bed pid
Conflicts:
Marlin/Configuration.h
12 years ago
e8c92e0a95
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
12 years ago
6b45e9f167
Add Duty Cycling to the Heater Bed
13 years ago
e31bef31ad
Limit PID autotune PWM to PID_MAX
13 years ago
1874cb71a6
Added option to increase the FAN PWM frequency.
13 years ago
3eacb4c16d
Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater
13 years ago
33bb044d7c
fixed catsting to (int)e in serial error messages.
see https://github.com/ErikZalm/Marlin/issues/148
13 years ago
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
13 years ago
8aee9d51b6
Disabled disable_heater in PID_autotune.
13 years ago
414408b2d0
Fix for wrong systax in #ifdef.
13 years ago
cf7c8c458f
Fixed MAX6675
13 years ago
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
13 years ago
33f5697888
PPID tune exports more constants.
13 years ago
15ad923310
Removed !!!. Stupid arduino bootloader can't handle this.
13 years ago
c077316b2b
Added PID autotune. (experimental)
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
13 years ago
79a466ca26
make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, complementing changes to analog2temp in d15f01e
13 years ago
b48d67ce10
Fixed homing
13 years ago
740f0c7690
Add explicit #define for bogus temp override
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature. But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
13 years ago
73344e69c1
Added temperature offset/gain settings for AD595.
13 years ago
14702089ee
-disable TEMP Min MAX Kill while using PS_ON Pin
ON GEN7 there is no temperature reading when power is off.. so Marlin
would kill itself. There seems to be an update from "Traumflug" on GEN7
using standby VCC for thermistors.
13 years ago
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
Needs some work to remove the blocking in read max6675.
13 years ago
8d0916af13
allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications
13 years ago
3c1a4aac2b
header file simplification
13 years ago
415aadf704
lcd panel bed support
advance and ultipanel not any more in default config
13 years ago
f312216e97
Revert "untestest commit, so I don't loose code.. features runout prevention addons"
This reverts commit 651cde8b98
13 years ago
651cde8b98
untestest commit, so I don't loose code.. features runout prevention addons
13 years ago
e017228569
Merged multiple extruder support.
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
13 years ago
4fd75dc813
Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
13 years ago
59205ac5fc
preliminiary implementation for the early heating finish.
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
13 years ago
dd5296ad4d
Fixed temperature reading bug.
(When using the lower and upper adc input bank)
13 years ago
959d82e81e
Small temperature disable bug.
13 years ago
2e43f9c809
Changed min max temperature code.
13 years ago
6841a10446
Fixed max/min temperature bug
13 years ago
ff69e0a772
Changed max/min temp init. Removed second uart from sabguino core
13 years ago
a9c7da06e3
and changed ultipanel to have the mm/sec and not mm/min
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.h
13 years ago
331e82dcd3
Buffer size > 16
13 years ago
c57906b627
fixed bug with adjusting ki in realtime.
13 years ago
65934eee9c
A lot of changes in the planner code
13 years ago
ff592b056a
heater power repair.
13 years ago
daid303
Mark Finn
ZetaPhoenix
Dabble63
Erik van der Zalm
Logan Bowers
Bernhard
haxar
Phil Hord
Christian Thalhammer
Michael Moon
Denis B
Bernhard Kubicek