Tree: 16f92dca44

FB4S_WIFI

FBG5_WIFI

MKS_UI

vanilla_fb_2.0.x

2.0.7.2

2.0.7.2_upd

2.0.8.1

2.0.9.1

2.0.9.2

2.0.9.3

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from '16f92dca44'

${ noResults }

Commit Graph

454 Commits (16f92dca445ced48219344bfb4a0dece48941dc5)

Author	SHA1	Message	Date
etagle	569df3fc0c	Fix interrupt-based endstop detection - Also implemented real endstop reading on interrupt.	6 years ago
etagle	a4af975873	Fix planner block optimization - Fixed the planner incorrectly avoiding optimization of the block following the active one. - Added extra conditions to terminate planner early and avoid redundant computations.	6 years ago
etagle	e0ca627033	Planner block HOLD flag Allows the Stepper ISR to wait until a given block is free for use. Allows Planner to plan the first move, which is split into two.	6 years ago
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner Better encapsulation and considerably reduce stepper jitter	6 years ago
etagle	0566badcef	Add memory barrier, optimal interrupt on-off Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)	6 years ago
Scott Lahteine	7dc03ce721	Simplified fix for babystep pulse width Alternative to the apparently superfluous double delay	6 years ago
Scott Lahteine	65270d6a96	Fix LIN_ADVANCE + SWITCHING_EXTRUDER Followup to #10656	6 years ago
Bob Kuhn	9ad42d6617	add delay between pulse edges (#10778)	6 years ago
Scott Lahteine	83d42f33e1	Add HAS_HOTEND_OFFSET_Z conditional	6 years ago
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	6 years ago
Giuliano	e1d9046efc	[2.0.x] Temperature reading fix (#10774)	6 years ago
Scott Lahteine	50270b53a0	Clear up some more compile warnings	6 years ago
Jiri Jaburek	43ddb29f9e	Add FAN_MAX_PWM for M106-controlled fans	6 years ago
Scott Lahteine	836b0bbeee	Fix MBL line_to_destination Fix #10708	6 years ago
Scott Lahteine	ba4c32eec5	Followup to _AXIS patch	6 years ago
Scott Lahteine	d9154ebdf6	Followup to math patch	6 years ago
Scott Lahteine	883b0c9880	Convert custom maths to inlines (#10728)	6 years ago
Scott Lahteine	08e36e264e	Apply _AXIS macro	6 years ago
Scott Lahteine	083ec9963e	Tweaks to heater / lcd conditions	6 years ago
Scott Lahteine	99ecdf59af	Smarter MIN, MAX, ABS macros Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`. Co-Authored-By: ejtagle <ejtagle@hotmail.com>	6 years ago
Scott Lahteine	8f8c6a9bc4	Move get_axis_position_mm to Planner (#10718)	6 years ago
Scott Lahteine	a1062eec5b	Better handling of DELAY_NS and DELAY_US (#10716) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	6 years ago
Scott Lahteine	f5aaa2d6c0	Fix some compiler warnings	6 years ago
Scott Lahteine	3614e6ce0f	Fix Switching Extruder with Linear Advance	6 years ago
Scott Lahteine	625035a9ce	Fix M301 access to lpq_len (#10714) Co-Authored-By: Zwaubel	6 years ago
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	6 years ago
Giuliano	d99f1b2245	[2.0.x] EEPROM code cleanup (#10710)	6 years ago
Scott Lahteine	325bbbc8c2	[2.0.x] Enable AD595 and AD8495 in concert (#10693) * Allow both AD595 and AD8495 in concert * General temperature code tweaks	6 years ago
Scott Lahteine	23a876b08d	Update a comment in motion.cpp	6 years ago
Scott Lahteine	439e0cdd0f	Patch up reverse_pass_kernel (and other planner code) (#10674)	6 years ago
Scott Lahteine	57c2f8d2f6	Trailing whitespace cleanup	6 years ago
Scott Lahteine	b76344c080	More Trinamic cleanup	6 years ago
Scott Lahteine	722aba77f3	Fix LIN_ADVANCE + SWITCHING_EXTRUDER stepper directions (#10656)	6 years ago
Scott Lahteine	a225d2e99e	Fix compilation with UBL and Arc/Bézier Fix #10660	6 years ago
Scott Lahteine	6d9ec1852a	Fix compilation of say_units Fixes #10663	6 years ago
Scott Lahteine	19f189b4e5	Add UBL support for G2/G3 and G5 (#10648)	6 years ago
Scott Lahteine	4d4bf7897d	Junction Deviation jerk limiting option	6 years ago
Scott Lahteine	0436e16fb2	Apply shorthand Assembler macros	6 years ago
Scott Lahteine	d1b619be52	Standardize some hexadecimals	6 years ago
Scott Lahteine	55f1f8446b	Show correct current units in M503	6 years ago
Scott Lahteine	1f11b0f612	Fully init planner sync block	6 years ago
Scott Lahteine	bfe223e120	Adjust usage of stepper.synchronize	6 years ago
Scott Lahteine	af1950a63e	Improve sync of stepper positions	6 years ago
Scott Lahteine	0c23792344	Apply int32_t to stepper	6 years ago
Scott Lahteine	81b632c255	Additional temp-oriented improvements	6 years ago
nightdemonx	e911635fb1	Add thermocouple with AD8495 support	6 years ago
Scott Lahteine	d7b699ec34	Fewer includes of vector_3.h	6 years ago
Scott Lahteine	2c1205d8b1	Improve debug of homing move feedrate	6 years ago
Scott Lahteine	c8e4b7c8a6	Fix XY homing move away rate	6 years ago
MagoKimbra	1f92b9a4ed	Fix do_probe_move with fr_mm_s (#10576)	6 years ago