0a2f60fab4
Make spi.h inclusion conditional
spi.h is only needed if HEATER_0_USES_MAX6675 is defined, so making its inclusion conditional on HEATER_0_USES_MAX6675 being defined.
7 years ago
1a447d0047
Fix variant conditional for 1284p
7 years ago
28fec61f92
M100 Fixes and Features
All the memory accesses need to be unsigned char in order to avoid
false errors being detected. Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
7 years ago
2f2835e622
Merge pull request #6332 from thinkyhead/rc_babystep_zprobe
Make BABYSTEP_ZPROBE_OFFSET an optional feature
7 years ago
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
7 years ago
cd4e6abec8
Group BABYSTEPPING options together
7 years ago
972c9655e9
Merge pull request #6245 from thinkyhead/rc_babystep_zprobe
BABYSTEPPING updates Z probe offset
7 years ago
60ac41a32c
Add code to handle changes to zprobe_zoffset
7 years ago
8fa4209916
Movement/adjustment should be reverse of probe offset change
7 years ago
361655828f
Use babystepping to adjust bed probe z-offset
7 years ago
36e5c7c389
Merge pull request #6330 from thinkyhead/rc_improvements
Sanity check per-axis options' array sizes
7 years ago
02fca543bb
Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
Make ADC sensor reading frequency adjustable
7 years ago
34308368c0
Sanity check per-axis settings for size
7 years ago
ac96ae89f9
Apply `const` in Stepper::isr
7 years ago
2fa1e882d0
Merge pull request #6325 from thinkyhead/rc_M20_with_size
Simplified M20 with size
7 years ago
1b12fea0fa
simplified M20 with size
7 years ago
4022b971db
Merge pull request #6315 from thinkyhead/rc_unify_M421
Unify M421
7 years ago
b236562354
Merge pull request #6306 from thinkyhead/cleanup_after_6302
Adjustments to M100
7 years ago
5e4f4d387f
Swap MBL z_values dimensions to [X][Y]
7 years ago
f81b518a03
Add Travis tests for optional M100 features
7 years ago
063f641651
Unify M421
7 years ago
6d5400dc31
Merge pull request #6240 from thinkyhead/rebuild_rgb_led
Extend RGB LED with Printer Events
7 years ago
dac21ec680
Add support for an RGBW LED
7 years ago
e7746ffee4
Extend RGB LED support, adding Printer Events
7 years ago
c7063eb55c
theTarget => target_temp
7 years ago
36bda2bade
Add HAS_RESUME_CONTINUE shorthand macro
7 years ago
53e6c33c37
2 is DXC_DUPLICATION_MODE
7 years ago
a2cb0a3d54
Use multiply for delta probe constraint
7 years ago
6487c96a4a
Merge pull request #6313 from Kaibob2/patch-10
Allow 10mm Movements for Z-Axis
7 years ago
944218f7da
Merge pull request #6309 from thinkyhead/rc_fix_minimum_pulse
Fix MINIMUM_STEPPER_PULSE calculations
7 years ago
001bc14255
Allow 10mm Movements for Z-Axis
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
7 years ago
6a9b008044
Fix MINIMUM_STEPPER_PULSE maths
7 years ago
68773f4486
Simplify stepper macros by renaming enable/disable macros
7 years ago
e02a5a6371
Add macros for delays by machine cycle
7 years ago
4ea447959e
Merge pull request #6311 from thinkyhead/rc_bare_M109_M190
Have M109 / M190 do nothing with no parameters
7 years ago
ecc537015a
Have M109 / M190 do nothing with no parameters
7 years ago
03aa9a390e
Apply coding standards to M100, break up into functions
7 years ago
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
Only lcd_synchronize needs no_reentry
7 years ago
4fcfe926d6
Only lcd_synchronize needs no_reentry
7 years ago
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
Save / restore z_fade_height in EEPROM
7 years ago
eff5af569b
Merge pull request #6300 from MagoKimbra/rc_fix_mesh_report
Fix mbl_mesh_report
7 years ago
4a18968c10
Merge pull request #6297 from Kaibob2/patch-9
Fix EPROM -> EEPROM
7 years ago
ba85faabc0
Fix M100 Free Memory Checker
M100 had numerious changes and quit working. Part of the problem is
the overloading of the SERIAL_PROTOCOL functions. Also, some of the
address arithmatic was changed to use char *ptr and passing ptr into the
SERIAL_PROTOCOL functions caused them to try to print a string instead
of a number. M100 is working again. Let's keep it that way!
M100 has been expanded to now have a function int
free_memory_is_corrupted() that can be called from other code to see if
the free space is still contiguous. It may make sense to add a flag to
control its verbose nature but right now, the extra chit chat is very
helpful to know int free_memory_is_corrupted() is doing the right thing
and what it found at various points when it was called. A 'Show &
Tell' is coming up with int free_memory_is_corrupted().
7 years ago
3b82db5fe9
Missing semicolon in ultralcd.cpp
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
7 years ago
7d2e637867
Fix mbl_mesh_report
7 years ago
afeb0452ef
Fix EPROM -> EEPROM
These fixes are neede because before it showed the englisch text even if language = de was selected
7 years ago
7f950a80c0
Make ADC sensor reading frequency adjustable
7 years ago
dad907b923
Merge pull request #6293 from thinkyhead/rc_move_toshiba
Put TOSHIBA with other stepper driver options
7 years ago
786af73e24
Convert config code to a static class
7 years ago
5b9476fe78
Added z_fade_height to EEPROM-Settings
Firmware was forgetting the z_fade_height in Planner, set by M420 Z<f>,
after each reset or loading settings from EEPROM. Added the float
z_fade_height to EEPROM-Storage, now remembers the value.
7 years ago
benlye
Roxy-3D
Scott Lahteine
Scott Lahteine
Thomas Moore
Bob-the-Kuhn
Kai
MagoKimbra
james94jeans2