andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge pull request #6272 from thinkyhead/rc_adc_variable_rate 

Make ADC sensor reading frequency adjustable
pull/1/head
Scott Lahteine 8 years ago
committed by GitHub
parent
2fa1e882d0 7f950a80c0
commit
02fca543bb
3 changed files with 129 additions and 119 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 22
      Marlin/enum.h
  2. 181
      Marlin/temperature.cpp
  3. 45
      Marlin/temperature.h

22
Marlin/enum.h
View File

@ -91,28 +91,6 @@ enum EndstopEnum {
Z2_MAX
};
/**
* Temperature
* Stages in the ISR loop
*/
enum TempState {
PrepareTemp_0,
MeasureTemp_0,
PrepareTemp_BED,
MeasureTemp_BED,
PrepareTemp_1,
MeasureTemp_1,
PrepareTemp_2,
MeasureTemp_2,
PrepareTemp_3,
MeasureTemp_3,
PrepareTemp_4,
MeasureTemp_4,
Prepare_FILWIDTH,
Measure_FILWIDTH,
StartupDelay // Startup, delay initial temp reading a tiny bit so the hardware can settle
};
#if ENABLED(EMERGENCY_PARSER)
enum e_parser_state {
state_RESET,

181
Marlin/temperature.cpp
View File

@ -24,8 +24,6 @@
* temperature.cpp - temperature control
*/
#include "Marlin.h"
#include "ultralcd.h"
#include "temperature.h"
@ -1538,8 +1536,8 @@ void Temperature::isr() {
CBI(TIMSK0, OCIE0B); //Disable Temperature ISR
sei();
static uint8_t temp_count = 0;
static TempState temp_state = StartupDelay;
static int8_t temp_count = -1;
static ADCSensorState adc_sensor_state = StartupDelay;
static uint8_t pwm_count = _BV(SOFT_PWM_SCALE);
// avoid multiple loads of pwm_count
uint8_t pwm_count_tmp = pwm_count;
@ -1812,6 +1810,22 @@ void Temperature::isr() {
#endif // SLOW_PWM_HEATERS
//
// Update lcd buttons 488 times per second
//
static bool do_buttons;
if ((do_buttons ^= true)) lcd_buttons_update();
/**
* One sensor is sampled on every other call of the ISR.
* Each sensor is read 16 (OVERSAMPLENR) times, taking the average.
*
* On each Prepare pass, ADC is started for a sensor pin.
* On the next pass, the ADC value is read and accumulated.
*
* This gives each ADC 0.9765ms to charge up.
*/
#define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC)
#ifdef MUX5
#define START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
@ -1819,122 +1833,94 @@ void Temperature::isr() {
#define START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
#endif
// Prepare or measure a sensor, each one every 14th frame
switch (temp_state) {
case PrepareTemp_0:
#if HAS_TEMP_0
switch (adc_sensor_state) {
case SensorsReady: {
// All sensors have been read. Stay in this state for a few
// ISRs to save on calls to temp update/checking code below.
constexpr int extra_loops = MIN_ADC_ISR_LOOPS - (int)SensorsReady;
static uint8_t delay_count = 0;
if (extra_loops > 0) {
if (delay_count == 0) delay_count = extra_loops; // Init this delay
if (--delay_count) // While delaying...
adc_sensor_state = (ADCSensorState)(int(SensorsReady) - 1); // retain this state (else, next state will be 0)
break;
}
else
adc_sensor_state = (ADCSensorState)0; // Fall-through to start first sensor now
}
#if HAS_TEMP_0
case PrepareTemp_0:
START_ADC(TEMP_0_PIN);
#endif
lcd_buttons_update();
temp_state = MeasureTemp_0;
break;
case MeasureTemp_0:
#if HAS_TEMP_0
break;
case MeasureTemp_0:
raw_temp_value[0] += ADC;
#endif
temp_state = PrepareTemp_BED;
break;
break;
#endif
case PrepareTemp_BED:
#if HAS_TEMP_BED
#if HAS_TEMP_BED
case PrepareTemp_BED:
START_ADC(TEMP_BED_PIN);
#endif
lcd_buttons_update();
temp_state = MeasureTemp_BED;
break;
case MeasureTemp_BED:
#if HAS_TEMP_BED
break;
case MeasureTemp_BED:
raw_temp_bed_value += ADC;
#endif
temp_state = PrepareTemp_1;
break;
break;
#endif
case PrepareTemp_1:
#if HAS_TEMP_1
#if HAS_TEMP_1
case PrepareTemp_1:
START_ADC(TEMP_1_PIN);
#endif
lcd_buttons_update();
temp_state = MeasureTemp_1;
break;
case MeasureTemp_1:
#if HAS_TEMP_1
break;
case MeasureTemp_1:
raw_temp_value[1] += ADC;
#endif
temp_state = PrepareTemp_2;
break;
break;
#endif
case PrepareTemp_2:
#if HAS_TEMP_2
#if HAS_TEMP_2
case PrepareTemp_2:
START_ADC(TEMP_2_PIN);
#endif
lcd_buttons_update();
temp_state = MeasureTemp_2;
break;
case MeasureTemp_2:
#if HAS_TEMP_2
break;
case MeasureTemp_2:
raw_temp_value[2] += ADC;
#endif
temp_state = PrepareTemp_3;
break;
break;
#endif
case PrepareTemp_3:
#if HAS_TEMP_3
#if HAS_TEMP_3
case PrepareTemp_3:
START_ADC(TEMP_3_PIN);
#endif
lcd_buttons_update();
temp_state = MeasureTemp_3;
break;
case MeasureTemp_3:
#if HAS_TEMP_3
break;
case MeasureTemp_3:
raw_temp_value[3] += ADC;
#endif
temp_state = PrepareTemp_4;
break;
break;
#endif
case PrepareTemp_4:
#if HAS_TEMP_4
#if HAS_TEMP_4
case PrepareTemp_4:
START_ADC(TEMP_4_PIN);
#endif
lcd_buttons_update();
temp_state = MeasureTemp_4;
break;
case MeasureTemp_4:
#if HAS_TEMP_4
break;
case MeasureTemp_4:
raw_temp_value[4] += ADC;
#endif
temp_state = Prepare_FILWIDTH;
break;
break;
#endif
case Prepare_FILWIDTH:
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
case Prepare_FILWIDTH:
START_ADC(FILWIDTH_PIN);
#endif
lcd_buttons_update();
temp_state = Measure_FILWIDTH;
break;
case Measure_FILWIDTH:
#if ENABLED(FILAMENT_WIDTH_SENSOR)
// raw_filwidth_value += ADC; //remove to use an IIR filter approach
if (ADC > 102) { //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data.
raw_filwidth_value -= (raw_filwidth_value >> 7); //multiply raw_filwidth_value by 127/128
raw_filwidth_value += ((unsigned long)ADC << 7); //add new ADC reading
case Measure_FILWIDTH:
if (ADC > 102) { // Make sure ADC is reading > 0.5 volts, otherwise don't read.
raw_filwidth_value -= (raw_filwidth_value >> 7); // Subtract 1/128th of the raw_filwidth_value
raw_filwidth_value += ((unsigned long)ADC << 7); // Add new ADC reading, scaled by 128
}
#endif
temp_state = PrepareTemp_0;
temp_count++;
break;
break;
#endif
case StartupDelay:
temp_state = PrepareTemp_0;
break;
case StartupDelay: break;
// default:
// SERIAL_ERROR_START;
// SERIAL_ERRORLNPGM("Temp measurement error!");
// break;
} // switch(temp_state)
} // switch(adc_sensor_state)
if (temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms.
if (!adc_sensor_state && ++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms.
temp_count = 0;
@ -1998,6 +1984,9 @@ void Temperature::isr() {
} // temp_count >= OVERSAMPLENR
// Go to the next state, up to SensorsReady
adc_sensor_state = (ADCSensorState)((int(adc_sensor_state) + 1) % int(StartupDelay));
#if ENABLED(BABYSTEPPING)
LOOP_XYZ(axis) {
int curTodo = babystepsTodo[axis]; //get rid of volatile for performance

45
Marlin/temperature.h
View File

@ -50,6 +50,49 @@
#define EXTRUDER_IDX active_extruder
#endif
/**
* States for ADC reading in the ISR
*/
enum ADCSensorState {
#if HAS_TEMP_0
PrepareTemp_0,
MeasureTemp_0,
#endif
#if HAS_TEMP_1
PrepareTemp_1,
MeasureTemp_1,
#endif
#if HAS_TEMP_2
PrepareTemp_2,
MeasureTemp_2,
#endif
#if HAS_TEMP_3
PrepareTemp_3,
MeasureTemp_3,
#endif
#if HAS_TEMP_4
PrepareTemp_4,
MeasureTemp_4,
#endif
#if HAS_TEMP_BED
PrepareTemp_BED,
MeasureTemp_BED,
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
Prepare_FILWIDTH,
Measure_FILWIDTH,
#endif
SensorsReady, // Temperatures ready. Delay the next round of readings to let ADC pins settle.
StartupDelay // Startup, delay initial temp reading a tiny bit so the hardware can settle
};
// Minimum number of Temperature::ISR loops between sensor readings.
// Multiplied by 16 (OVERSAMPLENR) to obtain the total time to
// get all oversampled sensor readings
#define MIN_ADC_ISR_LOOPS 10
#define ACTUAL_ADC_SAMPLES max(int(MIN_ADC_ISR_LOOPS), int(SensorsReady))
class Temperature {
public:
@ -74,7 +117,7 @@ class Temperature {
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
#define PID_dT ((OVERSAMPLENR * 12.0)/(F_CPU / 64.0 / 256.0))
#define PID_dT ((OVERSAMPLENR * float(ACTUAL_ADC_SAMPLES)) / (F_CPU / 64.0 / 256.0))
#endif
#if ENABLED(PIDTEMP)

Write Preview
Loading…
Cancel
Save