Group BABYSTEPPING options together

7 years ago · cd4e6abec8
20 changed files with 260 additions and 280 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -573,15 +573,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1088,13 +1094,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -554,15 +554,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1069,13 +1075,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -583,15 +583,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1098,13 +1104,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -578,15 +578,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1093,13 +1099,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@ -573,15 +573,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1088,13 +1094,6 @@
 */
 #define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
@ -575,15 +575,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1089,13 +1095,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -590,15 +590,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1105,13 +1111,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -590,15 +590,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1105,13 +1111,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -577,15 +577,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1092,13 +1098,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -572,15 +572,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1087,13 +1093,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -570,15 +570,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1085,13 +1091,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@ -573,15 +573,21 @@

 // @section lcd

-// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
-// it can e.g. be used to change z-positions in the print startup phase in real-time
-// does not respect endstops!
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  #define BABYSTEP_XY  //not only z, but also XY in the menu. more clutter, more functions
-                       //not implemented for deltabots!
-  #define BABYSTEP_INVERT_Z false  //true for inverse movements in Z
-  #define BABYSTEP_MULTIPLICATOR 1 //faster movements
+  #define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false  // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+                                        // Note: Extra time may be added to mitigate controller latency.
 #endif

 // @section extruder
@ -1088,13 +1094,6 @@
 */
 //#define EXTENDED_CAPABILITIES_REPORT

-/**
- * Double-click the Encoder button on the Status Screen for Z Babystepping.
- */
-//#define DOUBLECLICK_FOR_Z_BABYSTEPPING
-#define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
-                                        // Note: You may need to add extra time to mitigate controller latency.
-
 /**
 * Volumetric extrusion default state
 * Activate to make volumetric extrusion the default method,