Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

264 lines
9.3 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Info Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU && ENABLED(LCD_INFO_MENU)
#include "menu.h"
#if HAS_GAMES
#include "game/game.h"
#endif
#if ENABLED(PRINTCOUNTER)
#include "../../module/printcounter.h"
//
// About Printer > Printer Stats
//
void menu_info_stats() {
if (ui.use_click()) return ui.goto_previous_screen();
char buffer[21];
printStatistics stats = print_job_timer.getStats();
START_SCREEN(); // 12345678901234567890
STATIC_ITEM(MSG_INFO_PRINT_COUNT ": ", false, false, i16tostr3left(stats.totalPrints)); // Print Count: 999
STATIC_ITEM(MSG_INFO_COMPLETED_PRINTS": ", false, false, i16tostr3left(stats.finishedPrints)); // Completed : 666
duration_t elapsed = stats.printTime;
elapsed.toString(buffer);
STATIC_ITEM(MSG_INFO_PRINT_TIME ":", false, false); // Total print Time:
STATIC_ITEM("> ", false, false, buffer); // > 99y 364d 23h 59m 59s
elapsed = stats.longestPrint;
elapsed.toString(buffer);
STATIC_ITEM(MSG_INFO_PRINT_LONGEST ":", false, false); // Longest job time:
STATIC_ITEM("> ", false, false, buffer); // > 99y 364d 23h 59m 59s
sprintf_P(buffer, PSTR("%ld.%im"), long(stats.filamentUsed / 1000), int16_t(stats.filamentUsed / 100) % 10);
STATIC_ITEM(MSG_INFO_PRINT_FILAMENT ":", false, false); // Extruded total:
STATIC_ITEM("> ", false, false, buffer); // > 125m
#if SERVICE_INTERVAL_1 > 0
elapsed = stats.nextService1;
elapsed.toString(buffer);
STATIC_ITEM(SERVICE_NAME_1 MSG_SERVICE_IN, false, false); // Service X in:
STATIC_ITEM("> ", false, false, buffer); // > 7d 12h 11m 10s
#endif
#if SERVICE_INTERVAL_2 > 0
elapsed = stats.nextService2;
elapsed.toString(buffer);
STATIC_ITEM(SERVICE_NAME_2 MSG_SERVICE_IN, false, false);
STATIC_ITEM("> ", false, false, buffer);
#endif
#if SERVICE_INTERVAL_3 > 0
elapsed = stats.nextService3;
elapsed.toString(buffer);
STATIC_ITEM(SERVICE_NAME_3 MSG_SERVICE_IN, false, false);
STATIC_ITEM("> ", false, false, buffer);
#endif
END_SCREEN();
}
#endif
//
// About Printer > Thermistors
//
void menu_info_thermistors() {
if (ui.use_click()) return ui.goto_previous_screen();
START_SCREEN();
#define THERMISTOR_ID TEMP_SENSOR_0
#include "../thermistornames.h"
STATIC_ITEM("T0: " THERMISTOR_NAME, false, true);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_0_MINTEMP), false);
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_0_MAXTEMP), false);
#if TEMP_SENSOR_1 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_1
#include "../thermistornames.h"
STATIC_ITEM("T1: " THERMISTOR_NAME, false, true);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_1_MINTEMP), false);
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_1_MAXTEMP), false);
#endif
#if TEMP_SENSOR_2 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_2
#include "../thermistornames.h"
STATIC_ITEM("T2: " THERMISTOR_NAME, false, true);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_2_MINTEMP), false);
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_2_MAXTEMP), false);
#endif
#if TEMP_SENSOR_3 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_3
#include "../thermistornames.h"
STATIC_ITEM("T3: " THERMISTOR_NAME, false, true);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_3_MINTEMP), false);
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_3_MAXTEMP), false);
#endif
#if TEMP_SENSOR_4 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_4
#include "../thermistornames.h"
STATIC_ITEM("T4: " THERMISTOR_NAME, false, true);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_4_MINTEMP), false);
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_4_MAXTEMP), false);
#endif
#if TEMP_SENSOR_5 != 0
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_5
#include "../thermistornames.h"
STATIC_ITEM("T5: " THERMISTOR_NAME, false, true);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_5_MINTEMP), false);
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_5_MAXTEMP), false);
#endif
#if HAS_HEATED_BED
#undef THERMISTOR_ID
#define THERMISTOR_ID TEMP_SENSOR_BED
#include "../thermistornames.h"
STATIC_ITEM("TBed:" THERMISTOR_NAME, false, true);
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(BED_MINTEMP), false);
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(BED_MAXTEMP), false);
#endif
END_SCREEN();
}
//
// About Printer > Board Info
//
void menu_info_board() {
if (ui.use_click()) return ui.goto_previous_screen();
START_SCREEN();
STATIC_ITEM(BOARD_INFO_NAME, true, true); // MyPrinterController
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0
STATIC_ITEM(MSG_INFO_PSU ": " PSU_NAME, true);
END_SCREEN();
}
//
// About Printer > Printer Info
//
#if DISABLED(LCD_PRINTER_INFO_IS_BOOTSCREEN)
void menu_info_printer() {
if (ui.use_click()) return ui.goto_previous_screen();
START_SCREEN();
STATIC_ITEM(MSG_MARLIN, true, true); // Marlin
STATIC_ITEM(SHORT_BUILD_VERSION, true); // x.x.x-Branch
STATIC_ITEM(STRING_DISTRIBUTION_DATE, true); // YYYY-MM-DD HH:MM
STATIC_ITEM(MACHINE_NAME, true); // My3DPrinter
STATIC_ITEM(WEBSITE_URL, true); // www.my3dprinter.com
STATIC_ITEM(MSG_INFO_EXTRUDERS ": " STRINGIFY(EXTRUDERS), true); // Extruders: 2
#if ENABLED(AUTO_BED_LEVELING_3POINT)
STATIC_ITEM(MSG_3POINT_LEVELING, true); // 3-Point Leveling
#elif ENABLED(AUTO_BED_LEVELING_LINEAR)
STATIC_ITEM(MSG_LINEAR_LEVELING, true); // Linear Leveling
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
STATIC_ITEM(MSG_BILINEAR_LEVELING, true); // Bi-linear Leveling
#elif ENABLED(AUTO_BED_LEVELING_UBL)
STATIC_ITEM(MSG_UBL_LEVELING, true); // Unified Bed Leveling
#elif ENABLED(MESH_BED_LEVELING)
STATIC_ITEM(MSG_MESH_LEVELING, true); // Mesh Leveling
#endif
END_SCREEN();
}
#else
void menu_show_marlin_bootscreen() {
if (ui.use_click()) { ui.goto_previous_screen_no_defer(); }
ui.draw_marlin_bootscreen();
}
#if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
void menu_show_custom_bootscreen() {
if (ui.use_click()) { ui.goto_screen(menu_show_marlin_bootscreen); }
ui.draw_custom_bootscreen();
}
#endif
#endif // LCD_PRINTER_INFO_IS_BOOTSCREEN
//
// "About Printer" submenu
//
void menu_info() {
START_MENU();
MENU_BACK(MSG_MAIN);
#if ENABLED(LCD_PRINTER_INFO_IS_BOOTSCREEN)
MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, (
#if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
menu_show_custom_bootscreen
#else
menu_show_marlin_bootscreen
#endif
));
#else
MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, menu_info_printer); // Printer Info >
MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, menu_info_board); // Board Info >
MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, menu_info_thermistors); // Thermistors >
#endif
#if ENABLED(PRINTCOUNTER)
MENU_ITEM(submenu, MSG_INFO_STATS_MENU, menu_info_stats); // Printer Stats >
#endif
#if HAS_GAMES
#if ENABLED(GAMES_EASTER_EGG)
MENU_ITEM_DUMMY();
MENU_ITEM_DUMMY();
MENU_ITEM_DUMMY();
#endif
MENU_ITEM(submenu, MSG_GAMES, (
#if HAS_GAME_MENU
menu_game
#elif ENABLED(MARLIN_BRICKOUT)
brickout.enter_game
#elif ENABLED(MARLIN_INVADERS)
invaders.enter_game
#elif ENABLED(MARLIN_SNAKE)
snake.enter_game
#elif ENABLED(MARLIN_MAZE)
maze.enter_game
#endif
));
#endif
END_MENU();
}
#endif // HAS_LCD_MENU && LCD_INFO_MENU