Browse Source

Prevent BOARD_NAME conflict with env

pull/1/head
Scott Lahteine 5 years ago
parent
commit
0cc524b84f
  1. 2
      Marlin/src/lcd/menu/menu_info.cpp
  2. 2
      Marlin/src/pins/esp32/pins_ESP32.h
  3. 4
      Marlin/src/pins/linux/pins_RAMPS_LINUX.h
  4. 2
      Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h
  5. 2
      Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.1.h
  6. 2
      Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.3.h
  7. 4
      Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
  8. 2
      Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
  9. 2
      Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h
  10. 4
      Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
  11. 2
      Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
  12. 2
      Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
  13. 2
      Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h
  14. 2
      Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h
  15. 4
      Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
  16. 2
      Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h
  17. 2
      Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h
  18. 2
      Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
  19. 2
      Marlin/src/pins/lpc1769/pins_MKS_SGEN.h
  20. 2
      Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
  21. 2
      Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
  22. 2
      Marlin/src/pins/mega/pins_CHEAPTRONIC.h
  23. 2
      Marlin/src/pins/mega/pins_CHEAPTRONICv2.h
  24. 2
      Marlin/src/pins/mega/pins_CNCONTROLS_11.h
  25. 2
      Marlin/src/pins/mega/pins_CNCONTROLS_12.h
  26. 2
      Marlin/src/pins/mega/pins_CNCONTROLS_15.h
  27. 2
      Marlin/src/pins/mega/pins_EINSTART-S.h
  28. 2
      Marlin/src/pins/mega/pins_ELEFU_3.h
  29. 4
      Marlin/src/pins/mega/pins_GT2560_REV_A.h
  30. 2
      Marlin/src/pins/mega/pins_GT2560_REV_A_PLUS.h
  31. 4
      Marlin/src/pins/mega/pins_GT2560_V3.h
  32. 2
      Marlin/src/pins/mega/pins_GT2560_V3_MC2.h
  33. 2
      Marlin/src/pins/mega/pins_LEAPFROG.h
  34. 2
      Marlin/src/pins/mega/pins_MEGACONTROLLER.h
  35. 2
      Marlin/src/pins/mega/pins_MEGATRONICS.h
  36. 2
      Marlin/src/pins/mega/pins_MEGATRONICS_2.h
  37. 6
      Marlin/src/pins/mega/pins_MEGATRONICS_3.h
  38. 2
      Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h
  39. 2
      Marlin/src/pins/mega/pins_MINITRONICS.h
  40. 4
      Marlin/src/pins/mega/pins_OVERLORD.h
  41. 2
      Marlin/src/pins/mega/pins_SILVER_GATE.h
  42. 2
      Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h
  43. 2
      Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
  44. 2
      Marlin/src/pins/rambo/pins_EINSY_RETRO.h
  45. 4
      Marlin/src/pins/rambo/pins_MINIRAMBO.h
  46. 2
      Marlin/src/pins/rambo/pins_RAMBO.h
  47. 2
      Marlin/src/pins/rambo/pins_SCOOVO_X9H.h
  48. 6
      Marlin/src/pins/ramps/pins_3DRAG.h
  49. 2
      Marlin/src/pins/ramps/pins_AZTEEG_X3.h
  50. 2
      Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
  51. 2
      Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h
  52. 2
      Marlin/src/pins/ramps/pins_BIQU_KFB_2.h
  53. 2
      Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h
  54. 2
      Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h
  55. 2
      Marlin/src/pins/ramps/pins_FELIX2.h
  56. 4
      Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h
  57. 4
      Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h
  58. 4
      Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h
  59. 4
      Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h
  60. 2
      Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
  61. 2
      Marlin/src/pins/ramps/pins_K8200.h
  62. 2
      Marlin/src/pins/ramps/pins_K8400.h
  63. 2
      Marlin/src/pins/ramps/pins_K8800.h
  64. 2
      Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h
  65. 2
      Marlin/src/pins/ramps/pins_MKS_BASE.h
  66. 2
      Marlin/src/pins/ramps/pins_MKS_BASE_14.h
  67. 2
      Marlin/src/pins/ramps/pins_MKS_GEN_13.h
  68. 2
      Marlin/src/pins/ramps/pins_MKS_GEN_L.h
  69. 4
      Marlin/src/pins/ramps/pins_RAMPS.h
  70. 4
      Marlin/src/pins/ramps/pins_RAMPS_13.h
  71. 2
      Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h
  72. 2
      Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h
  73. 2
      Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h
  74. 2
      Marlin/src/pins/ramps/pins_RAMPS_OLD.h
  75. 2
      Marlin/src/pins/ramps/pins_RAMPS_PLUS.h
  76. 4
      Marlin/src/pins/ramps/pins_RIGIDBOARD.h
  77. 2
      Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h
  78. 2
      Marlin/src/pins/ramps/pins_RL200.h
  79. 6
      Marlin/src/pins/ramps/pins_RUMBA.h
  80. 2
      Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h
  81. 2
      Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h
  82. 2
      Marlin/src/pins/ramps/pins_TRIGORILLA_13.h
  83. 2
      Marlin/src/pins/ramps/pins_TRIGORILLA_14.h
  84. 2
      Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h
  85. 4
      Marlin/src/pins/ramps/pins_TT_OSCAR.h
  86. 2
      Marlin/src/pins/ramps/pins_ULTIMAIN_2.h
  87. 4
      Marlin/src/pins/ramps/pins_ULTIMAKER.h
  88. 10
      Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h
  89. 2
      Marlin/src/pins/ramps/pins_VORON.h
  90. 2
      Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h
  91. 2
      Marlin/src/pins/sam/pins_ADSK.h
  92. 2
      Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
  93. 2
      Marlin/src/pins/sam/pins_ARCHIM1.h
  94. 2
      Marlin/src/pins/sam/pins_ARCHIM2.h
  95. 2
      Marlin/src/pins/sam/pins_DUE3DOM.h
  96. 2
      Marlin/src/pins/sam/pins_DUE3DOM_MINI.h
  97. 4
      Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h
  98. 2
      Marlin/src/pins/sam/pins_RADDS.h
  99. 2
      Marlin/src/pins/sam/pins_RAMPS4DUE.h
  100. 2
      Marlin/src/pins/sam/pins_RAMPS_DUO.h

2
Marlin/src/lcd/menu/menu_info.cpp

@ -165,7 +165,7 @@ void menu_info_thermistors() {
void menu_info_board() {
if (ui.use_click()) return ui.goto_previous_screen();
START_SCREEN();
STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController
STATIC_ITEM(BOARD_INFO_NAME, true, true); // MyPrinterController
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0
STATIC_ITEM(MSG_INFO_PSU ": " PSU_NAME, true);

2
Marlin/src/pins/esp32/pins_ESP32.h

@ -29,7 +29,7 @@
"Oops! Select an ESP32 board in 'Tools > Board.'"
#endif
#define BOARD_NAME "Espressif ESP32"
#define BOARD_INFO_NAME "Espressif ESP32"
//
// I2S (steppers & other output-only pins)

4
Marlin/src/pins/linux/pins_RAMPS_LINUX.h

@ -45,8 +45,8 @@
* 7 | 11
*/
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.4"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "RAMPS 1.4"
#endif
#define E2END 0xFFF // 4KB

2
Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "AZSMZ MINI"
#define BOARD_INFO_NAME "AZSMZ MINI"
//
// Servos

2
Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.1.h

@ -25,7 +25,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "BIGTREE SKR 1.1"
#define BOARD_INFO_NAME "BIGTREE SKR 1.1"
//
// Limit Switches

2
Marlin/src/pins/lpc1768/pins_BIGTREE_SKR_V1.3.h

@ -25,7 +25,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "BIGTREE SKR 1.3"
#define BOARD_INFO_NAME "BIGTREE SKR 1.3"
// Ignore temp readings during development.
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000

4
Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h

@ -34,8 +34,8 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "BIQU Thunder B300 V1.0"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "BIQU Thunder B300 V1.0"
#endif
//

2
Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h

@ -34,7 +34,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "BIQU BQ111-A4"
#define BOARD_INFO_NAME "BIQU BQ111-A4"
//
// Limit Switches

2
Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h

@ -25,7 +25,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "GMARSH X6 REV1"
#define BOARD_INFO_NAME "GMARSH X6 REV1"
// Ignore temp readings during develpment.
//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE

4
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h

@ -29,8 +29,8 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "MKS SBASE"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "MKS SBASE"
#endif
#ifndef BOARD_WEBSITE_URL
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE"

2
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "MKS SGen-L"
#define BOARD_INFO_NAME "MKS SGen-L"
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SGEN_L"
//

2
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h

@ -40,7 +40,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "Re-ARM RAMPS 1.4"
#define BOARD_INFO_NAME "Re-ARM RAMPS 1.4"
//
// Servos

2
Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "Selena Compact"
#define BOARD_INFO_NAME "Selena Compact"
#define BOARD_WEBSITE_URL "https://github.com/Ales2-k/Selena"
//

2
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "Azteeg X5 GT"
#define BOARD_INFO_NAME "Azteeg X5 GT"
#define BOARD_WEBSITE_URL "https://tinyurl.com/yx8tdqa3"
//

4
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h

@ -29,8 +29,8 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Azteeg X5 MINI"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "Azteeg X5 MINI"
#endif
#define BOARD_WEBSITE_URL "http://www.panucatt.com/azteeg_X5_mini_reprap_3d_printer_controller_p/ax5mini.htm"

2
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI_WIFI.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "Azteeg X5 MINI WIFI"
#define BOARD_INFO_NAME "Azteeg X5 MINI WIFI"
//
// DIGIPOT slave addresses

2
Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "Cohesion3D Mini"
#define BOARD_INFO_NAME "Cohesion3D Mini"
//
// Servos

2
Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "Cohesion3D ReMix"
#define BOARD_INFO_NAME "Cohesion3D ReMix"
//
// Servos

2
Marlin/src/pins/lpc1769/pins_MKS_SGEN.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "MKS SGen"
#define BOARD_INFO_NAME "MKS SGen"
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SGEN"
#include "../lpc1768/pins_MKS_SBASE.h"

2
Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "Smoothieboard"
#define BOARD_INFO_NAME "Smoothieboard"
#define BOARD_WEBSITE_URL "http://smoothieware.org/smoothieboard"
//

2
Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h

@ -29,7 +29,7 @@
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "TH3D EZBoard"
#define BOARD_INFO_NAME "TH3D EZBoard"
#define BOARD_WEBSITE_URL "https://www.th3dstudio.com/product/ezboard-lite/"
//

2
Marlin/src/pins/mega/pins_CHEAPTRONIC.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Cheaptronic v1.0"
#define BOARD_INFO_NAME "Cheaptronic v1.0"
//
// Limit Switches
//

2
Marlin/src/pins/mega/pins_CHEAPTRONICv2.h

@ -31,7 +31,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Cheaptronic v2.0"
#define BOARD_INFO_NAME "Cheaptronic v2.0"
//
// Limit Switches

2
Marlin/src/pins/mega/pins_CNCONTROLS_11.h

@ -6,7 +6,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "CN Controls V11"
#define BOARD_INFO_NAME "CN Controls V11"
//
// Limit Switches

2
Marlin/src/pins/mega/pins_CNCONTROLS_12.h

@ -6,7 +6,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "CN Controls V12"
#define BOARD_INFO_NAME "CN Controls V12"
//
// Limit Switches

2
Marlin/src/pins/mega/pins_CNCONTROLS_15.h

@ -6,7 +6,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "CN Controls V15"
#define BOARD_INFO_NAME "CN Controls V15"
//
// Servos

2
Marlin/src/pins/mega/pins_EINSTART-S.h

@ -30,7 +30,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Einstart-S"
#define BOARD_INFO_NAME "Einstart-S"
//
// Limit Switches

2
Marlin/src/pins/mega/pins_ELEFU_3.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Elefu Ra v3"
#define BOARD_INFO_NAME "Elefu Ra v3"
//
// Limit Switches

4
Marlin/src/pins/mega/pins_GT2560_REV_A.h

@ -31,8 +31,8 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "GT2560 Rev.A"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "GT2560 Rev.A"
#endif
#define DEFAULT_MACHINE_NAME "Prusa i3 Pro B"

2
Marlin/src/pins/mega/pins_GT2560_REV_A_PLUS.h

@ -25,7 +25,7 @@
* Geeetech GT2560 Revision A+ board pin assignments
*/
#define BOARD_NAME "GT2560 Rev.A+"
#define BOARD_INFO_NAME "GT2560 Rev.A+"
#include "pins_GT2560_REV_A.h"

4
Marlin/src/pins/mega/pins_GT2560_V3.h

@ -29,8 +29,8 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "GT2560 V3.0"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "GT2560 V3.0"
#endif
//

2
Marlin/src/pins/mega/pins_GT2560_V3_MC2.h

@ -25,7 +25,7 @@
* GT2560 V3.0 pin assignment (for Mecreator 2)
*****************************************************************/
#define BOARD_NAME "GT2560 V3.0 (MC2)"
#define BOARD_INFO_NAME "GT2560 V3.0 (MC2)"
#define X_MIN_PIN 22
#define X_MAX_PIN 24

2
Marlin/src/pins/mega/pins_LEAPFROG.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Leapfrog"
#define BOARD_INFO_NAME "Leapfrog"
//
// Limit Switches

2
Marlin/src/pins/mega/pins_MEGACONTROLLER.h

@ -31,7 +31,7 @@
#error "Mega Controller supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Mega Controller"
#define BOARD_INFO_NAME "Mega Controller"
//
// Servos

2
Marlin/src/pins/mega/pins_MEGATRONICS.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Megatronics"
#define BOARD_INFO_NAME "Megatronics"
//
// Limit Switches
//

2
Marlin/src/pins/mega/pins_MEGATRONICS_2.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Megatronics v2.0"
#define BOARD_INFO_NAME "Megatronics v2.0"
//
// Limit Switches
//

6
Marlin/src/pins/mega/pins_MEGATRONICS_3.h

@ -30,11 +30,11 @@
#endif
#if MB(MEGATRONICS_32)
#define BOARD_NAME "Megatronics v3.2"
#define BOARD_INFO_NAME "Megatronics v3.2"
#elif MB(MEGATRONICS_31)
#define BOARD_NAME "Megatronics v3.1"
#define BOARD_INFO_NAME "Megatronics v3.1"
#else
#define BOARD_NAME "Megatronics v3.0"
#define BOARD_INFO_NAME "Megatronics v3.0"
#endif
//

2
Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h

@ -41,7 +41,7 @@
#error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Mightyboard"
#define BOARD_INFO_NAME "Mightyboard"
#define DEFAULT_MACHINE_NAME "MB Replicator"
//

2
Marlin/src/pins/mega/pins_MINITRONICS.h

@ -38,7 +38,7 @@
#error "Minitronics supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Minitronics v1.0/1.1"
#define BOARD_INFO_NAME "Minitronics v1.0/1.1"
//
// Limit Switches
//

4
Marlin/src/pins/mega/pins_OVERLORD.h

@ -31,8 +31,8 @@
#error "Overlord Controller supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "OVERLORD"
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define BOARD_INFO_NAME "OVERLORD"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Limit Switches

2
Marlin/src/pins/mega/pins_SILVER_GATE.h

@ -25,7 +25,7 @@
#error "Oops! Select 'Silvergate' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Silver Gate"
#define BOARD_INFO_NAME "Silver Gate"
#define X_STEP_PIN 43
#define X_DIR_PIN 44

2
Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Wanhao i3 Mini 0ne+"
#define BOARD_INFO_NAME "Wanhao i3 Mini 0ne+"
#define DEFAULT_MACHINE_NAME "i3 Mini"
#define BOARD_WEBSITE_URL "https://tinyurl.com/yyxw7se7"

2
Marlin/src/pins/rambo/pins_EINSY_RAMBO.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Einsy Rambo"
#define BOARD_INFO_NAME "Einsy Rambo"
//
// TMC2130 Configuration_adv defaults for EinsyRambo

2
Marlin/src/pins/rambo/pins_EINSY_RETRO.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino Mega 2560 or Rambo' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Einsy Retro"
#define BOARD_INFO_NAME "Einsy Retro"
//
// TMC2130 Configuration_adv defaults for EinsyRetro

4
Marlin/src/pins/rambo/pins_MINIRAMBO.h

@ -30,9 +30,9 @@
#endif
#if MB(MINIRAMBO_10A)
#define BOARD_NAME "Mini RAMBo 1.0a"
#define BOARD_INFO_NAME "Mini RAMBo 1.0a"
#else
#define BOARD_NAME "Mini RAMBo"
#define BOARD_INFO_NAME "Mini RAMBo"
#endif
//

2
Marlin/src/pins/rambo/pins_RAMBO.h

@ -45,7 +45,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Rambo"
#define BOARD_INFO_NAME "Rambo"
//
// Servos

2
Marlin/src/pins/rambo/pins_SCOOVO_X9H.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Scoovo X9H"
#define BOARD_INFO_NAME "Scoovo X9H"
//
// Servos

6
Marlin/src/pins/ramps/pins_3DRAG.h

@ -25,12 +25,12 @@
* 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments
*/
#ifndef BOARD_NAME
#define BOARD_NAME "3Drag"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "3Drag"
#endif
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
#endif
#ifndef DEFAULT_SOURCE_CODE_URL

2
Marlin/src/pins/ramps/pins_AZTEEG_X3.h

@ -34,7 +34,7 @@
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 6 // Define before RAMPS pins include
#endif
#define BOARD_NAME "Azteeg X3"
#define BOARD_INFO_NAME "Azteeg X3"
//
// Servos

2
Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h

@ -31,7 +31,7 @@
#error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Azteeg X3 Pro"
#define BOARD_INFO_NAME "Azteeg X3 Pro"
//
// RAMPS pins overrides

2
Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h

@ -29,7 +29,7 @@
#error "2PrintBeta Due supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "2PrintBeta Due"
#define BOARD_INFO_NAME "2PrintBeta Due"
//
// M3/M4/M5 - Spindle/Laser Control

2
Marlin/src/pins/ramps/pins_BIQU_KFB_2.h

@ -29,7 +29,7 @@
#error "KFB 2.0 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "KFB 2.0"
#define BOARD_INFO_NAME "KFB 2.0"
//
// Heaters / Fans

2
Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "ZUM Mega 3D"
#define BOARD_INFO_NAME "ZUM Mega 3D"
//
// Heaters / Fans

2
Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Duplicator i3 Plus"
#define BOARD_INFO_NAME "Duplicator i3 Plus"
//
// Limit Switches

2
Marlin/src/pins/ramps/pins_FELIX2.h

@ -29,7 +29,7 @@
#error "Felix 2.0+ supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Felix 2.0+"
#define BOARD_INFO_NAME "Felix 2.0+"
//
// Heaters / Fans

4
Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h

@ -31,8 +31,8 @@
#error "Formbot supports up to 3 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Formbot Raptor"
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define BOARD_INFO_NAME "Formbot Raptor"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos

4
Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h

@ -25,8 +25,8 @@
* Formbot Raptor 2 pin assignments
*/
#define BOARD_NAME "Formbot Raptor2"
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define BOARD_INFO_NAME "Formbot Raptor2"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
#define FAN_PIN 6

4
Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h

@ -31,8 +31,8 @@
#error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Formbot"
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define BOARD_INFO_NAME "Formbot"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos

4
Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h

@ -31,8 +31,8 @@
#error "Formbot supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Formbot"
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define BOARD_INFO_NAME "Formbot"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos

2
Marlin/src/pins/ramps/pins_FYSETC_F6_13.h

@ -33,7 +33,7 @@
//#error "SD_DETECT_INVERTED must be disabled for the FYSETC_F6_13 board."
#endif
#define BOARD_NAME "FYSETC F6 1.3"
#define BOARD_INFO_NAME "FYSETC F6 1.3"
#define RESET_PIN 30
#define SPI_FLASH_CS 83

2
Marlin/src/pins/ramps/pins_K8200.h

@ -26,7 +26,7 @@
* Identical to 3DRAG
*/
#define BOARD_NAME "Velleman K8200"
#define BOARD_INFO_NAME "Velleman K8200"
#define DEFAULT_MACHINE_NAME "K8200"
#define DEFAULT_SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200"

2
Marlin/src/pins/ramps/pins_K8400.h

@ -32,7 +32,7 @@
* - Second heater has moved pin
*/
#define BOARD_NAME "K8400"
#define BOARD_INFO_NAME "K8400"
#define DEFAULT_MACHINE_NAME "Vertex"
#include "pins_3DRAG.h"

2
Marlin/src/pins/ramps/pins_K8800.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "K8800"
#define BOARD_INFO_NAME "K8800"
#define DEFAULT_MACHINE_NAME "Vertex Delta"
//#define LCD_SCREEN_ROT_180

2
Marlin/src/pins/ramps/pins_MAKEBOARD_MINI.h

@ -21,7 +21,7 @@
*/
#pragma once
#define BOARD_NAME "MAKEboard Mini"
#define BOARD_INFO_NAME "MAKEboard Mini"
//
// Only 3 Limit Switch plugs on Micromake C1

2
Marlin/src/pins/ramps/pins_MKS_BASE.h

@ -31,7 +31,7 @@
#error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS BASE 1.0"
#define BOARD_INFO_NAME "MKS BASE 1.0"
//
// Heaters / Fans

2
Marlin/src/pins/ramps/pins_MKS_BASE_14.h

@ -29,7 +29,7 @@
#error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS BASE 1.4"
#define BOARD_INFO_NAME "MKS BASE 1.4"
//
// Heaters / Fans

2
Marlin/src/pins/ramps/pins_MKS_GEN_13.h

@ -34,7 +34,7 @@
#error "MKS GEN 1.3/1.4 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS GEN >= v1.3"
#define BOARD_INFO_NAME "MKS GEN >= v1.3"
//
// Heaters / Fans

2
Marlin/src/pins/ramps/pins_MKS_GEN_L.h

@ -29,7 +29,7 @@
#error "MKS GEN L supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS GEN L"
#define BOARD_INFO_NAME "MKS GEN L"
//
// Heaters / Fans

4
Marlin/src/pins/ramps/pins_RAMPS.h

@ -57,8 +57,8 @@
#endif
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.4"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "RAMPS 1.4"
#endif
//

4
Marlin/src/pins/ramps/pins_RAMPS_13.h

@ -34,8 +34,8 @@
*
*/
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.3"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "RAMPS 1.3"
#endif
#define IS_RAMPS_13

2
Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h

@ -25,7 +25,7 @@
#error "Creality3D RAMPS supports only 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Creality3D RAMPS"
#define BOARD_INFO_NAME "Creality3D RAMPS"
//
// Heaters / Fans

2
Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h

@ -25,7 +25,7 @@
#error "Dagoma3D F5 RAMPS supports only 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Dagoma3D F5 RAMPS"
#define BOARD_INFO_NAME "Dagoma3D F5 RAMPS"
#define X_STOP_PIN 2
#define Y_STOP_PIN 3

2
Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h

@ -25,7 +25,7 @@
#error "Ender-4 supports only 1 hotend / E-stepper. Comment out this line to continue."
#endif
#define BOARD_NAME "Ender-4"
#define BOARD_INFO_NAME "Ender-4"
#include "pins_RAMPS.h"

2
Marlin/src/pins/ramps/pins_RAMPS_OLD.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "RAMPS <1.2"
#define BOARD_INFO_NAME "RAMPS <1.2"
// Uncomment the following line for RAMPS v1.0
//#define RAMPS_V_1_0

2
Marlin/src/pins/ramps/pins_RAMPS_PLUS.h

@ -42,7 +42,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "RAMPS 1.4 Plus"
#define BOARD_INFO_NAME "RAMPS 1.4 Plus"
#define RAMPS_D8_PIN 10
#define RAMPS_D10_PIN 8

4
Marlin/src/pins/ramps/pins_RIGIDBOARD.h

@ -25,8 +25,8 @@
* RIGIDBOARD Arduino Mega with RAMPS v1.4 pin assignments
*/
#ifndef BOARD_NAME
#define BOARD_NAME "RigidBoard"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "RigidBoard"
#endif
//

2
Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h

@ -25,7 +25,7 @@
* RIGIDBOARD V2 Arduino Mega with RAMPS v1.4 pin assignments
*/
#define BOARD_NAME "RigidBoard V2"
#define BOARD_INFO_NAME "RigidBoard V2"
#include "pins_RIGIDBOARD.h"

2
Marlin/src/pins/ramps/pins_RL200.h

@ -26,7 +26,7 @@
* extruder motors due to dual Z motors. Pinout therefore based on pins_RUMBA.h.
*/
#define BOARD_NAME "RL200"
#define BOARD_INFO_NAME "RL200"
#define DEFAULT_MACHINE_NAME "Rapide Lite 200"
#if HOTENDS > 2 || E_STEPPERS > 2

6
Marlin/src/pins/ramps/pins_RUMBA.h

@ -31,11 +31,11 @@
#error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "Rumba"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "Rumba"
#endif
#ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
#endif
//

2
Marlin/src/pins/ramps/pins_RUMBA_RAISE3D.h

@ -21,7 +21,7 @@
*/
#pragma once
#define BOARD_NAME "Raise3D Rumba"
#define BOARD_INFO_NAME "Raise3D Rumba"
#define DEFAULT_MACHINE_NAME "Raise3D N Series"
// Raise3D uses thermocouples on the standard input pins

2
Marlin/src/pins/ramps/pins_SAINSMART_2IN1.h

@ -29,7 +29,7 @@
#error "Sainsmart 2-in-1 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "Sainsmart"
#define BOARD_INFO_NAME "Sainsmart"
//
// Heaters / Fans

2
Marlin/src/pins/ramps/pins_TRIGORILLA_13.h

@ -25,7 +25,7 @@
* Arduino Mega with RAMPS v1.3 for Anycubic
*/
#define BOARD_NAME "Anycubic RAMPS 1.3"
#define BOARD_INFO_NAME "Anycubic RAMPS 1.3"
#define IS_RAMPS_EFB
#define RAMPS_D9_PIN 44

2
Marlin/src/pins/ramps/pins_TRIGORILLA_14.h

@ -25,7 +25,7 @@
* Arduino Mega with RAMPS v1.4 for Anycubic
*/
#define BOARD_NAME "Anycubic RAMPS 1.4"
#define BOARD_INFO_NAME "Anycubic RAMPS 1.4"
//
// Servos

2
Marlin/src/pins/ramps/pins_TRONXY_V3_1_0.h

@ -31,7 +31,7 @@
#error "TRONXY-V3-1.0 supports only 2 hotends/E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "TRONXY-V3-1.0"
#define BOARD_INFO_NAME "TRONXY-V3-1.0"
//
// Servos

4
Marlin/src/pins/ramps/pins_TT_OSCAR.h

@ -28,8 +28,8 @@
#error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "TT OSCAR"
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define BOARD_INFO_NAME "TT OSCAR"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
//
// Servos

2
Marlin/src/pins/ramps/pins_ULTIMAIN_2.h

@ -37,7 +37,7 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Ultimaker 2.x"
#define BOARD_INFO_NAME "Ultimaker 2.x"
#define DEFAULT_MACHINE_NAME "Ultimaker"
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"

4
Marlin/src/pins/ramps/pins_ULTIMAKER.h

@ -37,8 +37,8 @@
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Ultimaker"
#define DEFAULT_MACHINE_NAME BOARD_NAME
#define BOARD_INFO_NAME "Ultimaker"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
//

10
Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h

@ -36,7 +36,7 @@
* the revisions provided inconsistent information.
*
* As best I can determine:
* 1.5.3 boards should use the pins_ULTIMAKER.h file which means the BOARD_NAME
* 1.5.3 boards should use the pins_ULTIMAKER.h file which means the BOARD_INFO_NAME
* define in this file should say 1.5.3 rather than 1.5.4
* This file is meant for 1.1 - 1.3 boards.
* The endstops for the 1.0 boards use different definitions than on the 1.1 - 1.3
@ -65,13 +65,13 @@
#endif
#ifdef BOARD_REV_1_1_TO_1_3
#define BOARD_NAME "Ultimaker 1.1-1.3"
#define BOARD_INFO_NAME "Ultimaker 1.1-1.3"
#elif defined(BOARD_REV_1_0)
#define BOARD_NAME "Ultimaker 1.0"
#define BOARD_INFO_NAME "Ultimaker 1.0"
#elif defined(BOARD_REV_1_5)
#define BOARD_NAME "Ultimaker 1.5"
#define BOARD_INFO_NAME "Ultimaker 1.5"
#else
#define BOARD_NAME "Ultimaker 1.5.4+"
#define BOARD_INFO_NAME "Ultimaker 1.5.4+"
#endif
#define DEFAULT_MACHINE_NAME "Ultimaker"
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"

2
Marlin/src/pins/ramps/pins_VORON.h

@ -26,7 +26,7 @@
* See https://github.com/mzbotreprap/VORON/blob/master/Firmware/Marlin/pins_RAMPS_VORON.h
*/
#define BOARD_NAME "VORON Design v2"
#define BOARD_INFO_NAME "VORON Design v2"
#define RAMPS_D8_PIN 11

2
Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h

@ -31,7 +31,7 @@
#error "Z-Bolt X Series board supports up to 4 hotends / E-steppers."
#endif
#define BOARD_NAME "Z-Bolt X Series"
#define BOARD_INFO_NAME "Z-Bolt X Series"
//
// Servos

2
Marlin/src/pins/sam/pins_ADSK.h

@ -25,7 +25,7 @@
* Arduino DUE Shield Kit (ADSK) pin assignments
*/
#define BOARD_NAME "ADSK"
#define BOARD_INFO_NAME "ADSK"
#if !defined(__SAM3X8E__) && !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino Due or Mega' in 'Tools > Board.'"

2
Marlin/src/pins/sam/pins_ALLIGATOR_R2.h

@ -30,7 +30,7 @@
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Alligator Board R2"
#define BOARD_INFO_NAME "Alligator Board R2"
//
// Servos

2
Marlin/src/pins/sam/pins_ARCHIM1.h

@ -41,7 +41,7 @@
#error "Oops! Select 'Archim' in 'Tools > Board.'"
#endif
#define BOARD_NAME "Archim 1.0"
#define BOARD_INFO_NAME "Archim 1.0"
//
// Items marked * have been altered from Archim v1.0

2
Marlin/src/pins/sam/pins_ARCHIM2.h

@ -43,7 +43,7 @@
#error "Archim2 requires Software SPI. Enable TMC_USE_SW_SPI in Configuration_adv.h."
#endif
#define BOARD_NAME "Archim 2.0"
#define BOARD_INFO_NAME "Archim 2.0"
//
// Items marked * have been altered from Archim v1.0

2
Marlin/src/pins/sam/pins_DUE3DOM.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
#endif
#define BOARD_NAME "DUE3DOM"
#define BOARD_INFO_NAME "DUE3DOM"
//
// Servos

2
Marlin/src/pins/sam/pins_DUE3DOM_MINI.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
#endif
#define BOARD_NAME "DUE3DOM MINI"
#define BOARD_INFO_NAME "DUE3DOM MINI"
//
// Servos

4
Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h

@ -29,8 +29,8 @@
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "PRINTRBOARD_G2"
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "PRINTRBOARD_G2"
#endif
//

2
Marlin/src/pins/sam/pins_RADDS.h

@ -29,7 +29,7 @@
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'"
#endif
#define BOARD_NAME "RADDS"
#define BOARD_INFO_NAME "RADDS"
//
// Servos

2
Marlin/src/pins/sam/pins_RAMPS4DUE.h

@ -43,7 +43,7 @@
#error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "RAMPS4DUE"
#define BOARD_INFO_NAME "RAMPS4DUE"
#define IS_RAMPS4DUE
//

2
Marlin/src/pins/sam/pins_RAMPS_DUO.h

@ -47,7 +47,7 @@
#error "Oops! Select 'Arduino Due' or 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_NAME "RAMPS Duo"
#define BOARD_INFO_NAME "RAMPS Duo"
#define IS_RAMPS_DUO
#include "pins_RAMPS.h"

Some files were not shown because too many files changed in this diff

Loading…
Cancel
Save