| .. |
|
Gen7
|
Fix Gen7 compile if you have avr-libc version 1.7.1 or higher. See http://code.google.com/p/arduino/issues/detail?id=604
|
12 years ago |
|
Sanguino
|
Fixed compiler warning for Sanguino compile
|
13 years ago |
|
hardware/tools/avr/etc
|
ATMega1284P support for Arduino IDE
|
13 years ago |
|
COPYING
|
first commit
|
14 years ago |
|
Configuration.h
|
Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter).
|
12 years ago |
|
ConfigurationStore.cpp
|
Fixed #317
|
12 years ago |
|
ConfigurationStore.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 years ago |
|
Configuration_adv.h
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
12 years ago |
|
LCD Menu Tree.pdf
|
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
|
13 years ago |
|
LiquidCrystalRus.cpp
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
12 years ago |
|
LiquidCrystalRus.h
|
Enables support the Cyrillic alphabet for LCD
|
12 years ago |
|
Makefile
|
Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.
|
12 years ago |
|
Marlin.h
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 years ago |
|
Marlin.pde
|
Mistake there, not sure why I did that. My bad.
|
12 years ago |
|
MarlinSerial.cpp
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 years ago |
|
MarlinSerial.h
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 years ago |
|
Marlin_main.cpp
|
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
|
12 years ago |
|
Menu Plans.xlsx
|
Tidy up
|
13 years ago |
|
Sd2Card.cpp
|
Fix for a few -Wextra warnings.
|
12 years ago |
|
Sd2Card.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 years ago |
|
Sd2PinMap.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 years ago |
|
SdBaseFile.cpp
|
Few simple fixes that save RAM, as static strings are stored in RAM by default.
|
12 years ago |
|
SdBaseFile.h
|
Added long filename support.
|
13 years ago |
|
SdFatConfig.h
|
Added long filename support.
|
13 years ago |
|
SdFatStructs.h
|
Added long filename support.
|
13 years ago |
|
SdFatUtil.cpp
|
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
|
13 years ago |
|
SdFatUtil.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 years ago |
|
SdFile.cpp
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
12 years ago |
|
SdFile.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 years ago |
|
SdInfo.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 years ago |
|
SdVolume.cpp
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 years ago |
|
SdVolume.h
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
13 years ago |
|
cardreader.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 years ago |
|
cardreader.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 years ago |
|
createTemperatureLookupMarlin.py
|
Added new temperature lookup table creation tool. This one uses stein hart-hart equations.
|
12 years ago |
|
create_speed_lookuptable.py
|
Added 20MHz support.
|
13 years ago |
|
fastio.h
|
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
|
12 years ago |
|
language.h
|
I hope last changes to french translation
|
12 years ago |
|
motion_control.cpp
|
software_endstops: use *_MIN_POS and *_MAX_POS for arcs
|
13 years ago |
|
motion_control.h
|
Removed interrupt nesting in the stepper ISR.
|
13 years ago |
|
pins.h
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 years ago |
|
planner.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 years ago |
|
planner.h
|
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
|
13 years ago |
|
speed_lookuptable.h
|
Made the 2nd speed lookup table condition more explicit.
|
12 years ago |
|
stepper.cpp
|
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
|
12 years ago |
|
stepper.h
|
Few simple fixes that save RAM, as static strings are stored in RAM by default.
|
12 years ago |
|
temperature.cpp
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
12 years ago |
|
temperature.h
|
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
|
12 years ago |
|
thermistortables.h
|
allow marlin internal 0°C represenation
|
12 years ago |
|
ultralcd.cpp
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 years ago |
|
ultralcd.h
|
Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.
|
12 years ago |
|
watchdog.cpp
|
Fix compiling the watchdog error message when the manual reset watchdog is used.
|
12 years ago |
|
watchdog.h
|
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
|
12 years ago |
|
wiring.h
|
add wiring.h, that can be used to overwrite:
|
13 years ago |
Johann Rocholl
6cba11f087