This repository has been archived on 2025-12-23. You can view files and clone it. You cannot open issues or pull requests or push a commit.

daid303 46ec4b648c Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.

2012-12-11 10:21:44 +01:00

..

cardreader.cpp

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

cardreader.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

Configuration_adv.h

Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.

2012-12-06 10:36:07 +01:00

Configuration.h

Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter).

2012-12-08 10:49:01 -08:00

ConfigurationStore.cpp

Fixed #317

2012-11-24 17:32:30 +01:00

ConfigurationStore.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

COPYING

first commit

2011-08-12 22:28:35 +02:00

create_speed_lookuptable.py

Added 20MHz support.

2012-03-11 12:25:04 +01:00

createTemperatureLookupMarlin.py

Added new temperature lookup table creation tool. This one uses stein hart-hart equations.

2012-11-16 23:51:05 +01:00

fastio.h

Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.

2012-12-08 15:16:38 -08:00

language.h

I hope last changes to french translation

2012-11-18 22:34:56 +01:00

LCD Menu Tree.pdf

Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.

2012-08-29 21:08:41 +01:00

LiquidCrystalRus.cpp

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

LiquidCrystalRus.h

Enables support the Cyrillic alphabet for LCD

2012-10-12 19:06:43 +04:00

Makefile

Add printrboard and brainwave to Makefile.

2012-12-09 23:30:55 +01:00

Marlin_main.cpp

Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.

2012-12-11 10:21:44 +01:00

Marlin.h

AT90USB is only defined after pins.h is included.

2012-12-09 01:40:33 -08:00

Marlin.pde

Mistake there, not sure why I did that. My bad.

2012-12-05 20:23:13 +01:00

MarlinSerial.cpp

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

MarlinSerial.h

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

Menu Plans.xlsx

Tidy up

2012-08-29 22:53:41 +01:00

motion_control.cpp

software_endstops: use *_MIN_POS and *_MAX_POS for arcs

2012-08-10 19:36:30 +01:00

motion_control.h

Removed interrupt nesting in the stepper ISR.

2011-11-27 21:12:55 +01:00

pins.h

Teensylu and Printrboard use different analog pins for thermistors.

2012-12-09 02:19:13 -08:00

planner.cpp

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

planner.h

Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.

2012-05-09 08:05:13 +03:00

Sd2Card.cpp

Fix for a few -Wextra warnings.

2012-11-12 15:35:28 +01:00

Sd2Card.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2PinMap.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdBaseFile.cpp

Few simple fixes that save RAM, as static strings are stored in RAM by default.

2012-11-28 10:30:34 +01:00

SdBaseFile.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatConfig.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatStructs.h

Added long filename support.

2012-08-22 14:49:57 +02:00

SdFatUtil.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdFatUtil.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.cpp

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

SdFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdInfo.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

speed_lookuptable.h

Made the 2nd speed lookup table condition more explicit.

2012-11-11 12:02:48 +01:00

stepper.cpp

Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1

2012-12-09 23:46:42 +01:00

stepper.h

Few simple fixes that save RAM, as static strings are stored in RAM by default.

2012-11-28 10:30:34 +01:00

temperature.cpp

Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.

2012-12-10 10:48:46 +01:00

temperature.h

Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

2012-12-09 23:00:06 +01:00

thermistortables.h

Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

2012-12-09 23:00:06 +01:00

ultralcd.cpp

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

ultralcd.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

watchdog.cpp

Fix compiling the watchdog error message when the manual reset watchdog is used.

2012-12-06 10:27:50 +01:00

watchdog.h

First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.

2012-11-06 12:06:41 +01:00

wiring.h

add wiring.h, that can be used to overwrite:

2011-12-22 14:57:28 +01:00