fe7e890b09
Fix issues with ADC_KEYPAD
Fixes #7150
8 years ago
a1632cfa0a
Added option 'H' to G29 P4.
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
8 years ago
e687782875
Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready
Add Skynet/ANET A10 support
8 years ago
1446b5f01d
Allow more avr variants with build_marlin*
8 years ago
efc6a9c1b8
Merge pull request #7136 from thinkyhead/bf_digipot_save
Edit digipot currents via LCD, save to EEPROM
8 years ago
b3c36c98fd
Edit digipot currents via LCD, save to EEPROM
8 years ago
3c7bfe798d
Various cleanups ahead of digipot save
8 years ago
9651d01e1a
Add Skynet/ANET A10 support
8 years ago
eb314373bb
Config spacing & consistency, group custom LCDs
8 years ago
6c45fa7dcc
Apply #elif in LCD conditionals
8 years ago
ece89bcf7a
Merge pull request #7119 from thinkyhead/bf_vref_MCP4018
Fix: set digipot mcp4018 Vrefmax to 1.666V
8 years ago
afbc6e3e2f
Update DELTA/SCARA config comments
8 years ago
1e47c17b46
Fix: set digipot mcp4018 Vrefmax to 1.666V
8 years ago
ebe6719e12
Merge pull request #7128 from thinkyhead/bf_enhanced_arcs
Enhance G2/G3 with 'P' and G17/G18/G19 Plane Select
8 years ago
80a232419d
CNC workspace planes and 'P' argument for G2/G3
8 years ago
5fb0d401eb
Formatting tweaks
8 years ago
ed04d0b6be
Label DualXMode enums
8 years ago
786cdea124
Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined
8 years ago
ee7163fd3a
Fix pinsDebug compile errors
8 years ago
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
Addressing #6992 and #5851
8 years ago
a18324bc8d
Give a more detailed issue template
8 years ago
254a11b083
Merge pull request #7120 from thinkyhead/bf_sainsmart_link
Add link to F. Malpartida LiquidCrystal library
8 years ago
aeb6d465a4
Merge pull request #7118 from thinkyhead/bf_french_update
French update
8 years ago
325f09ea6c
Add link to custom LiquidCrystal library by F. Malpartida
8 years ago
d26c8cc5c8
fix_planner_refresh_e_positioning ( #7103 )
* fix_planner_refresh_e_positioning
* Fix
8 years ago
c7f04fbcc7
French translation
8 years ago
41bfff14e2
Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
8 years ago
424d0bae8b
Merge pull request #7100 from thinkyhead/bf_HAL_prepare
Apply maths macros and type changes ahead of HAL
8 years ago
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
8 years ago
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
8 years ago
d5368461f9
Merge pull request #7098 from thinkyhead/bf_ubl_steps
Step-by-Step Menu addition
8 years ago
e907654d6a
Do two or three fewer test builds
8 years ago
6c45d0fd81
Apply maths macros and type changes ahead of HAL
8 years ago
8a51e2960c
Improve the experience of editing steps_per_mm
8 years ago
725d9d9a56
Fix and improve LCD value editing display
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
8 years ago
499bb85a95
Clean up, put ubl menu itemization closer at hand
8 years ago
90f5f82926
Step-by-Step Menu addition
8 years ago
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
Convert DAC percent to uint8_t
8 years ago
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
8 years ago
a1c65fd3d5
convert DAC percent to uint8_t
=====================
add test to Travis
8 years ago
7b79f443ef
Merge pull request #7096 from thinkyhead/redo_DSE
Support for two switching extruders
8 years ago
907cafcbfd
Support for two switching extruders
8 years ago
17f69f8ca2
Merge pull request #7094 from thinkyhead/bf_fix_advance_rate
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
8 years ago
cfcd069501
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
8 years ago
b8b7ef1902
Merge pull request #7090 from thinkyhead/bf_italian_refix
Fix Italian language mapper
8 years ago
42f7f9e013
Merge pull request #7060 from bgort/i2cpefix
I2C Position Encoders Example Configs
8 years ago
0b49bddec2
Fix Italian language mapper
8 years ago
7e028ec429
Merge pull request #7089 from thinkyhead/bf_italian_update
Added missing Italian translations
8 years ago
2e26a7c752
Added missing Italian translations
8 years ago
2e1b7d3a22
Merge pull request #7079 from thinkyhead/bf_m600_fixes
M600 fixes
8 years ago
Scott Lahteine
dot-bob
Scott Lahteine
Bob-the-Kuhn
Paweł Stawicki
MagoKimbra
Gege2B
Tannoo
Florian Heilmann
Ross Allan
Silvio Didonna