Richard Wackerbarth
8f620de0ff
Actually activate Automatic Versioning
10 years ago
domonoky
443e7edef4
- Add support for L6470 Drivers.
- Both TMC, L6470 and pin-driven drivers work.
- All can be mixed and matched as needed.
10 years ago
domonoky
38500165ea
First attempt at adding TMC Driver support. May need some cleanup.
10 years ago
Gege2B
b4e9395661
Corrected a typo in ArduinoAddons/Arduino_1.5.x/(...)/avr/boards.txt about Sanguino
10 years ago
galexander1
d4880a9e60
Revert "Move Sd library out into library"
10 years ago
odewdney
cf50c0eff8
Arduino.h case sensitive include
10 years ago
odewdney
f84ff4ba7d
Move SD Fat library out of main src
10 years ago
odewdney
9d9c859ac1
First move of SdFat library
10 years ago
Bo Herrmannsen
b17b8583af
adding hardware files for OMC
for ide 1.0.6
10 years ago
Bo Herrmannsen
1ba7c31395
Adding Melzi board
these are the files needed to support the Melzi board
10 years ago
mattrobbo10
89abf07faa
Added gen7-dist - marlin now compiles for gen7
10 years ago
Courtney Bane
253cf0f427
Add Arduino additions for Arduino 1.5.x.
10 years ago
Ronald
c2b3e88787
Changed 1284p fuse setting for Arduino_1.x.x
- Remove the two version of 16mHz. Crystal and resonator use the same
fuse setting. Also, Arduino IDE only showed the first one 16Mhz as a
board option.
- Added 20Mhz board option.
Symptoms for incorrect fuse setting:
- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.
Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay
11 years ago
Ronald
f303129fb6
Changed 1284p fuse setting for 8, 16 and 20 Mhz
Symtopns:
- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.
Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay
11 years ago
whosawhatsis
28aca76c4d
Group hardware files for Arduino 1.x.x into hardware folder
11 years ago
hcker2000
ad588e8990
Added new board for those of us with sanguinololu boards with ceramic resonators
11 years ago
Steve Kelly
d7b1a8ba33
add rambo arduino addons
11 years ago
ellensp
e019197b32
renamed ArduinoAddons/Arduino_1.x.x/sanguino to Sanguino. Now make works for Arduino > 1.0 on linux
11 years ago
Scott Lahteine
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
Also cosmetic comment changes and spelling corrections in printed
messages
11 years ago
MaikStohn
3a6abe1d6e
Removed STB custom font hack from u8glib library and moved to marlin project
12 years ago
MaikStohn
c83863d5d6
add U8glib library to Arduino1.x includes
12 years ago
Dirk Eichel
c28e71a1bf
Reduced u8glib SPI speed to fosc/8
Makes the lib compatible with most LCDs
12 years ago
Dirk Eichel
ee8feb9dee
Add Marlin (reprap) specific fonts 6x10, 6x9
Font size 6x10 with feedrate symbol & Font size 6x9.
12 years ago
Dirk Eichel
c8e2f44087
Add u8glib library supporting dot matrix displays
https://code.google.com/p/u8glib/
Universal Graphics Library for 8 Bit Embedded Systems
12 years ago
Dirk Eichel
f991bf23b2
Add bootloader files for ATmega1284/Sanguino
Added the optiboot bootloader, uses only 512kB of FLASH
Includes .hex file is for 20MHz µC Clock and serial speed of 57k6
12 years ago
Dirk Eichel
5bfba7720e
Switched to Sanguino 0023r4
This is the actual Sanguino release for Arduino 023.
It has full ATmega1284p support.
Reference:
https://code.google.com/p/sanguino/downloads/detail?name=Sanguino-0023r4.zip&can=2&q=
12 years ago
Dirk Eichel
a069d30a4b
Add additional Sanguino bard versions to boards.txt
ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
12 years ago
MendelMax
67710df9f3
Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
Removed incorrect LiquidCrystal_I2C Library
12 years ago
Bob Clough
83e33bdd26
Added LiquidCrystal_I2C library to ArduinoAddons
12 years ago
daid303
442ade15a6
Move Gen6 stuff into a proper location.
12 years ago
Yuri Valentini
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
12 years ago
Yuri Valentini
69582042d7
Definitions for Sanguino SPI
12 years ago
daid303
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
12 years ago