Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
MaikStohn	b657a18449	Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" This reverts commit `3682d9bd5b`.	13 years ago
MaikStohn	3682d9bd5b	magic PROGMEM defines to avoid hundreds of wrong GCC warnings	13 years ago
Erik van der Zalm	1874cb71a6	Added option to increase the FAN PWM frequency.	13 years ago
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	13 years ago
Erik van der Zalm	63aec3c56e	Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart. Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp	13 years ago
Erik van der Zalm	aac7aa3bf0	Queued fan control. Issue #90	13 years ago
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	13 years ago
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	13 years ago
Erik van der Zalm	598eb1d4f1	Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)	13 years ago
Erik van der Zalm	9173a5713b	Teensylu support.	13 years ago
Michael Moon	8d0916af13	allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications	13 years ago
Bernhard	8463e39a4a	starting with sanguino arduino 1.0 compatibility	13 years ago
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 years ago
Bernhard	3c1a4aac2b	header file simplification	13 years ago
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 years ago
Bernhard	06411d5c9e	ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.	13 years ago
Bernhard	986f0ba76c	moved <stdio.h> to more dominant location.	13 years ago
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 years ago
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 years ago
Bernhard	0bc9daa4f7	make it compile with arduino 1.0 ; function is still untested.	13 years ago
Bernhard	b0c3871750	more fixing of the sanguino math round problem	13 years ago
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	13 years ago
Bernhard	2d9a715655	first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.	13 years ago
Bernhard	26a1de1e44	force inline	13 years ago
Bernhard Kubicek	7919a40d06	watchdog,percent done,	13 years ago
Bernhard Kubicek	9980ceb4a3	added a m400, that finished all moves, and the mechanism so that if an endstop is hit it the ISR, the steps_to_be_taken are stored, and some current_block data that will be deleted in the next move If the normal loop() then finds such an event, the position is calculated (floats would have taken too long in the ISR) A serial message is generated.	13 years ago
Bernhard Kubicek	36958ee305	minor changes and first not-well working version of autotemp	13 years ago
Bernhard Kubicek	ba8a53a40f	Streaming.h is gone. It conflicted with PROGMEM. And saving memory is more important than nicer code, imho	13 years ago
Bernhard Kubicek	ab154d5592	project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.	13 years ago
Bernhard Kubicek	7b70caab7c	made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support.	13 years ago
Bernhard Kubicek	1d171e9e52	reformating and some minor bugs/things found on the way.	13 years ago
Bernhard Kubicek	900e0c9bf2	overworked the serial responses. Quite difficult, since many texts are Pronterface protocol.	13 years ago
Bernhard Kubicek	1740a83e11	correcting commit errors.	13 years ago
Bernhard Kubicek	e8092898b1	watchdog into dedicated file	13 years ago
Erik van der Zalm	d15f01e1b4	Temperature changes	13 years ago
Bernhard Kubicek	b9ea0651ec	Revert "this is not working. Do you maybe know why?" This reverts commit `8bcdb9f5f0`.	13 years ago
Bernhard Kubicek	8bcdb9f5f0	this is not working. Do you maybe know why?	13 years ago
Bernhard Kubicek	00674af3a8	merge from the branch bkubicek/Marlin/zalmmerge	13 years ago
Erik van der Zalm	094afe7c10	Merged Marlin, Marlin non gen6 and Ultimaker changes	13 years ago
Erik van der Zalm	8e017b81ab	Sync with non-gen6 version	13 years ago
Erik van der Zalm	750f6c33e3	first commit	13 years ago

41 Commits (bf077125b9828b871e5750e8e03e96a44c6bfbfd)