Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	1e946d681d	Update Marlin for newest TMC libraries - TMC2130Stepper v2.2.0 - TMC2208Stepper v0.0.4	7 years ago
Scott Lahteine	4aebe3d82e	Pretty up EEPROM port args	7 years ago
Scott Lahteine	51bf3c9503	Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE	7 years ago
Studiodyne	e7a61de8af	[2.0] FWRetract Reset (Best way) (#10083 )	7 years ago
Scott Lahteine	e7570f3195	Improve TMC config organization, naming	7 years ago
Scott Lahteine	07cf2cd9c4	Fix sensorless_homing_per_axis compile warning	7 years ago
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069 ) Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	7 years ago
Scott Lahteine	468f34104b	Patch do_blocking_move_to so 'destination' can be used	7 years ago
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058 ) Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	7 years ago
Scott Lahteine	751785fc97	Followup to recent patches - `M666` is static, not inline - Disambiguate some stepper macros	7 years ago
Scott Lahteine	a0211f5d6c	Disambiguate else in stepper_indirection.h	7 years ago
Scott Lahteine	f10c87b442	Update Endstops class for 1.1.x parity	7 years ago
Scott Lahteine	239902f861	Fix E2END and add EEPROM to Smart RAMPS Reference #9983	7 years ago
Scott Lahteine	419d12ca1b	Add UNKNOWN_Z_NO_RAISE option With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.	7 years ago
Scott Lahteine	3b4c89e4b5	Move do_probe_raise closer to set_probe_deployed …and limit the raise to Z_MAX_POS	7 years ago
Scott Lahteine	2908e76151	Fix position_is_reachable_by_probe typo, add comment Fix #10029	7 years ago
Scott Lahteine	6d9ea7e184	Fix position_is_reachable_by_probe typo, add comment Fix #10029	7 years ago
Scott Lahteine	161ff9ff35	Fix UPDATE_ENDSTOP for CorePQ compatibility Fixes #9939	7 years ago
Scott Lahteine	49ca67202f	Patch configuration_store for extra serial port Fix #9948	7 years ago
Scott Lahteine	16a8edc5f0	Add more delay before pulse off in Linear Advance ISR A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153	7 years ago
Scott Lahteine	dfd5d2fe75	Have position_is_reachable_by_probe use the whole bed (#10020 ) Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.	7 years ago
Scott Lahteine	3c2bfa5e53	Update powersupply_on in power_on/off (#10015 ) Fix #10004	7 years ago
Scott Lahteine	8d32fd997f	Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)	7 years ago
Scott Lahteine	98d48fc731	Followup to HAL_timer_restrain Followup to #9985	7 years ago
Chris Pepper	a1a88ebabc	HAL function to ensure min stepper interrupt interval (#9985 )	7 years ago
Scott Lahteine	9515e5aefb	Fix LA_active_extruder (static)	7 years ago
Scott Lahteine	e5ec793f7e	Wrap stepper indirection macros	7 years ago
Sebastianv650	5b85464791	Fix for LA (#9964 ) Missed in the original LA 1.5 PR: eISR has to use a local copy of current_block->use_advance_lead because it might still run wenn the last block has been set to NULL.	7 years ago
Scott Lahteine	ffbf63e6af	Add HAS_TEMP_SENSOR conditional	7 years ago
Scott Lahteine	2057177184	Make enums into implicit char	7 years ago
Scott Lahteine	ca0def766e	LIN_ADVANCE single stepper optimization	7 years ago
Scott Lahteine	8291ae34f2	Support duplication mode in LIN_ADVANCE	7 years ago
Scott Lahteine	0dd1c4458d	Put more code between pulse start and stop (#9959 )	7 years ago
Scott Lahteine	36262a0479	Use static classes for job timers (#9938 )	7 years ago
Scott Lahteine	930720bbbb	Fix broken reverse planner (#9943 ) From #9914 by @Sebastianv650	7 years ago
Bob-the-Kuhn	025118da3e	Init print_job_timer in setup() instead of "early" (#9937 )	7 years ago
Scott Lahteine	07ae23fe14	No pulse delay on last e_steps in advance isr	7 years ago
Scott Lahteine	ed758de80d	tweak comment in stepper.cpp	7 years ago
Scott Lahteine	d1dc863962	autotemp_factor is not value_celsius_diff See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822	7 years ago
Thomas Moore	f3914a432e	Clear retracted status when homing the Z axis	7 years ago
Scott Lahteine	6d7f4f84e2	Add board MKS_BASE_HEROIC (#9926 ) Followup to #9008 - Don't define micro-stepping pins for boards that lack them. - Allow setting of 128 microsteps with `M350`.	7 years ago
Scott Lahteine	649f375494	Fix: M112 calling kill from interrupt (#9923 ) Fix #9906	7 years ago
Studiodyne	23a576faf7	[2.0] Fix for FW retract (#9878 )	7 years ago
Scott Lahteine	91db7930dc	Drop SCARA_FEEDRATE_SCALING The updated planner takes the length of the move, so this pre-calculation is no longer needed.	7 years ago
Scott Lahteine	1746749361	Followup to #9868	7 years ago
Scott Lahteine	a446433c87	Fix SENSORLESS_HOMING for Core Kinematics (#9868 )	7 years ago
Zachary Hill	c22f8dd660	Get duration_t in printcounter.h for its clients (#9843 )	7 years ago
Scott Lahteine	966d9af98a	Mesh export in Bilinear + UBL M503	7 years ago
Scott Lahteine	8d5a77001e	EEPROM parity with 1.1.x	7 years ago
Sebastianv650	cb4cb86d80	Useless line removed (#9814 ) nextAdvanceISR is set in the next if structure in every possible situation, so it's useless to set it once more before.	7 years ago

1 2 3 4 5 ...

337 Commits (899b4df7a33e29365e8304b4871ddaed2fb468ba)