Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
daid303	71efcfc648	Most likely fixing issue #295 .	12 years ago
daid303	04be9d6001	God damn. Sorry, my mistake, forgot to add this file.	12 years ago
daid303	c17da4b707	Add ConfigurationStore to the Makefile.	12 years ago
daid	ccd9fd0dc3	Merge pull request #292 from jothan/lcdfix Lcd fixes	12 years ago
Jonathan Bastien-Filiatrault	46b9988e26	Search and replace failure.	12 years ago
Jonathan Bastien-Filiatrault	0f73afb0b0	Avoid defining overriding definitions for the RepRapDiscount Smart Controller. Remove common definitions. Harmonize declaration order.	12 years ago
Jonathan Bastien-Filiatrault	36b452c7ac	Remove abbrs.	12 years ago
daid	a394ac9f95	Merge pull request #294 from YanFM/patch-1 Update Marlin/language.h	12 years ago
YanFM	332344bd43	Update Marlin/language.h Included Portuguese language	12 years ago
daid303	e6c1cadea0	Set the watchdog to a 4 second timeout, as with 1 second it can timeout during SD card init.	12 years ago
daid	faea7d72b8	Merge pull request #290 from buildrob/Marlin_v1 Clean up special serial port cases	12 years ago
daid303	12a4d60e18	Fix the EEPROM storage, no longer inline it at multiple locations, and remove the template.	12 years ago
Robert F-C	08337e01f7	Added change to feature list.	12 years ago
Jonathan Bastien-Filiatrault	9606f4d04f	Include Marlin_main.cpp in source files.	12 years ago
Jonathan Bastien-Filiatrault	3cbaad9288	RepRapDiscount Smart Controller pin definitions.	12 years ago
Robert F-C	99692dc99e	Clean up special serial port cases Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register special case. Clarify comments.	12 years ago
daid303	5a998558a9	Update suggested by Robert F-C. #289	12 years ago
daid303	f6ff0ab767	signed/unsigned fixes.	12 years ago
daid303	5d471e0f34	Also reset the PID values to defaults. Fixes #281	12 years ago
daid303	d3ebc34958	Hopefully also support chips with a single UART in MarlinSerial now.	12 years ago
daid303	b6ff45254e	Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.	12 years ago
daid303	7e348fcb5f	By mistake enabled the watchdog by default. This should be off by default.	12 years ago
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	12 years ago
daid	539f3b3fe4	Merge pull request #284 from brackendawson/Marlin_v1 Use the right pins for Gen7 1.4	12 years ago
daid	2f20df3f55	Merge pull request #289 from buildrob/Marlin_v1 Marlin v1 configurable serial port	12 years ago
Robert F-C	65c9a0728f	Set default serial port back to 0.	12 years ago
Robert F-C	ab9d183024	Make serial port configurable. This change makes the choice of serial port configurable so that wireless capability can be easily added by connecting Bluetooth modules (such as BlueSmirf or JY-MCU) to the expansion port pins.	12 years ago
Bracken Dawson	f5631a89e8	Add dummy Emergancy Pin to Gen7 1.4 Change required after pulling from ErikZalm.	12 years ago
Bracken Dawson	a4f9e1ebf2	Merge git://github.com/ErikZalm/Marlin into Marlin_v1	12 years ago
Bracken Dawson	2873d67b17	Put bogus temp override back in Gen7 up to 1.3 Took out the ifdef when I split 1.4 out and forgot to permanently define it for <=1.3.	12 years ago
ErikZalm	a7e40b2903	Merge pull request #276 from setar/Marlin_v1 Fix num of digits on LCD for E and Z axis.	12 years ago
ErikZalm	23b0f8ed4b	Merge pull request #279 from MaikStohn/Marlin_v1 Fixed wrong code (will not even compile when EXTRUDERS>2)	12 years ago
MaikStohn	6ed02c86be	Fixed wrong code (will not even compile when EXTRUDERS>2)	12 years ago
Sergey Taranenko	2a67363e27	Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp	12 years ago
Sergey Taranenko	205304ddee	Merge git://github.com/ErikZalm/Marlin into Marlin_v1	12 years ago
Erik vd Zalm	58bca87c72	fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	12 years ago
Erik vd Zalm	febeb43197	Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '" This reverts commit `cb02c2f9d8`.	12 years ago
Sergey Taranenko	8178dec4c3	Fix num of digits on LCD for E and Z axis. The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1	12 years ago
ErikZalm	70f57a6844	Merge pull request #273 from setar/Marlin_v1 fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	12 years ago
ErikZalm	ff14199e58	Merge pull request #270 from jothan/Marlin_v1 Create an explicit rule for building applet/Marlin.cpp.	12 years ago
ErikZalm	bfdf0932c1	Merge pull request #274 from DanieleSdei/Marlin_v1 Italian language support	12 years ago
Daniele Sdei	695938ba3f	Italian language support	12 years ago
Sergey Taranenko	cb02c2f9d8	fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '	12 years ago
Jonathan Bastien-Filiatrault	e4a5e333ef	Generalize.	12 years ago
Jonathan Bastien-Filiatrault	e10d3136c8	Create an explicit rule for building applet/Marlin.cpp. It would seem that the pattern matches do not work when the source file is created when make is running. The result of this is that it is necessary to run "make" twice to build the firmware. This adds an explicit rule without a pattern match for building applet/Marlin.cpp it corrects the make behaviour at the cost of adding a little redundancy in the Makefile.	12 years ago
ErikZalm	9f089756b7	Merge pull request #265 from setar/Marlin_v1 Added Russian translation	12 years ago
ErikZalm	654387297f	Merge pull request #268 from brupje/Marlin_v1 Marlin v1	12 years ago
brupje	326423719f	Add support for Megatronics	12 years ago
brupje	d07b6e93d5	Add support for Megatronics	12 years ago
Sergey Taranenko	efcc28d347	Fix check for include LiquidCrystalRus.h	12 years ago

1 2 3 4 5 ...

601 Commits (71efcfc648ba1eae643d64e15b29e3e1edbc19f4) All Branches Search

601 Commits (71efcfc648ba1eae643d64e15b29e3e1edbc19f4)

All Branches