Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	63a146d424	planner.synchronize at start of tool_change See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498	6 years ago
Scott Lahteine	f2c3b0d476	Use bit flags for homed/known	6 years ago
Scott Lahteine	d2647c1f19	Fix G1 behaviour after tool unpark Fix #10777 for 2.0.x Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>	7 years ago
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	7 years ago
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	7 years ago
GMagician	21a47b50f4	Additional tool-change fixes (#10304 ) Followup to #10257	7 years ago
Scott Lahteine	2672120a97	Do a small raise for all move-back	7 years ago
Scott Lahteine	5acccbacc1	Simplified leveling-based tool change	7 years ago
Scott Lahteine	d1734a089a	Split up tool_change for some setups	7 years ago
Scott Lahteine	b6a55f0891	Temporary workaround for tool-change compile error Pending a more complete solution to tool-change Z deviation.	7 years ago
Scott Lahteine	bb7236a750	Z correction on tool-change for all HAS_MESH (#10199 )	7 years ago
Scott Lahteine	c6ff39cc14	Spacing cleanup	7 years ago
Scott Lahteine	a6feb58837	Delta support for multiple hotends with offsets (#10118 )	7 years ago
Scott Lahteine	2bea1bda56	Move more strings to PROGMEM	7 years ago
Scott Lahteine	fadf9eb2d7	Simplify midpos calculation	7 years ago
GMagician	118ac61e59	[2.0.x] Tool change bad behaviour fix Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position	7 years ago
GMagician	a61127a421	[2.0.x] tool change bad behaviours This will solve 2 issues on tool change. 1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current. Since no move no bed level matrix should be applied 2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed	7 years ago
Scott Lahteine	c0000a0cdc	Move servo code to modules/servo.*	7 years ago
Scott Lahteine	06ee6584fd	Remove offsets from soft endstops, tool change	7 years ago
Scott Lahteine	79772219ae	Fix Fan Multiplexer init	7 years ago
Scott Lahteine	f8393a0908	Operate in Native Machine Space	7 years ago
Roxy-3D	72156a2029	change to better (more clear) names (#8050 ) set_destination_to_current() changed to set_destination_from_current() set_current_to_destination() changed to set_current_from_destination()	7 years ago
Scott Lahteine	c0dddd4233	Tweaks to tool_change, GcodeSuite::T()	7 years ago
Scott Lahteine	3e3911fb81	Use planner.leveling_active for all leveling systems	7 years ago
Scott Lahteine	9a930ebec2	Make leveling_is_active a macro	7 years ago
Thomas Moore	0cb00f52d9	Cleanup warnings	7 years ago
GMagician	c508e9adec	Fix compiler error Added missing include file, called 'leveling_is_active()' with no prototipe defined.	7 years ago
Scott Lahteine	07cf75883f	Move T (tool change) to cpp	7 years ago
Scott Lahteine	1a37ebc76d	Move M163-M165 MIXING_EXTRUDER to cpp	7 years ago
Scott Lahteine	75cf17d816	Move M702 MK2_MULTIPLEXER to cpp	7 years ago
Scott Lahteine	4a220a8b79	Move M380_M381 to cpp, solenoid feature	7 years ago
Scott Lahteine	51f195e698	Move dwell to gcode	7 years ago
Scott Lahteine	4231faf779	Initial split-up of G-code handlers by category	7 years ago

33 Commits (5ce5ff8e9befae837d583527b591445936fbb7da)