72a7fac461
Only queue babysteps if axis is in a known position
8 years ago
7f950a80c0
Make ADC sensor reading frequency adjustable
8 years ago
832064e4f2
Implementation changes to support 5 extruders
8 years ago
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
8 years ago
6618346148
Patches to work around "register spill" compiler bug
8 years ago
271ced7341
Prevent re-entering of temperature ISR
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
8 years ago
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
8 years ago
1864b282c5
Implement reversed CORE options
8 years ago
00662b8635
Minor babystep cleanup patches
8 years ago
d963020532
Sort out some header dependencies
8 years ago
1e551c0688
Revert "Squashed - Removal of PID functional range"
8 years ago
02fe9cf558
Removal of functional range constraint
Also lined up the >> 1 and / 2 mentioned earlier in the unconstrained I term issue,
8 years ago
a765c98850
Removal of the constraints of the Iterm
8 years ago
076f3a8284
unsigned char => uint8_t
8 years ago
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
8 years ago
3e8f9ecd1c
Extend min/max_temp_error for the bed
8 years ago
b73203a0b7
Move some includes around to uncover missing deps
8 years ago
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
8 years ago
b40661cb18
Fix output of heater states
8 years ago
2d378fac1b
No need to include thermistortables.h in Configuration.h
8 years ago
cdd77d23bb
Neaten up temperature member data
8 years ago
d4c68279c8
Add "P" parameter to M302
8 years ago
809da999dc
Apply HOTEND_INDEX in preheat methods
8 years ago
3d78b690e5
Single PID dataset with HOTENDS == 1
8 years ago
bf9967c65d
Apply HOTEND_INDEX in MILLISECONDS_PREHEAT_TIME
8 years ago
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
8 years ago
182c8d7f8f
Dyze High Temp Thermistor Support
8 years ago
ee0983ab57
Further reduction when HOTENDS == 1
8 years ago
b72238f406
Invariant get_pid_output with HOTENDS < 2
8 years ago
dcb8ec32ee
Fix compile error with watch_bed_next_ms
9 years ago
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
85512e9372
Drop FORCE_INLINE from temperature.h
`FORCE_INLINE` seems to have no effect on code generation with standard
optimization.
9 years ago
78fb02a5ad
Apply static to Temperature class
9 years ago
0e55c06f7d
Rename CORE_AXIS_3 to NORMAL_AXIS
9 years ago
5172d4ba40
COREYZ stepper, planner, endstop, babysteps
9 years ago
6b13c430ae
The TRReset state is not needed with fall-through
9 years ago
b65ea98d6b
Localize babystepping in the Temperature class
So that `ultralcd.cpp` doesn’t need to worry about the details.
9 years ago
1a97442d19
Follow-up the PR #3643(Temperature singleton)
Follow-up the PR #3643(Temperature singleton)
・Change from fanSpeedSoftPwm[0] to thermalManager.fanSpeedSoftPwm[0] in planner.cpp
It fix compilation error when FAN_SOFT_PWM is enabled.
・Remove declaration of setExtruderAutoFanState() in temperature.h
Because that function was abolished.
・Change from babystepsTodo to thermalManager.babystepsTodo in ultralcd.cpp
It fix compilation errors when BABYSTEPPING is enabled.
9 years ago
084f6b5b44
Temperature singleton class
9 years ago
908229dbb3
Introduce temp watch protection for the bed
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
9 years ago
96f51f400f
Planner singleton class
9 years ago
ba66336503
Output error for disabled M303
9 years ago
d4a848c72a
Fix broken PID_PARAMS_PER_EXTRUDER
As noted by @FalloutBe in #3519
9 years ago
f9e1a0ee6c
suppress warnings
9 years ago
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
0da744b7b0
Further cleanup of comments, partial Doxygen-style
Following up on #3231
9 years ago
5e5d250832
Added gplv3 header to all Marlin files
9 years ago
04fa9d4f47
Make Autotune options into Menu Edit Items
9 years ago
e3f583a3be
Fixes for PID AutoTune from menu
Fixes for #3189
Setting a temp is still missing
9 years ago
3b3e8a02b5
Initial implementation of PID Autotune Menu Items
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
9 years ago
Thomas Moore
Scott Lahteine
Sebastianv650
Scott Lahteine
Rerouter
esenapaj
gralco
esenapaj
jbrazio
WPBack