Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Johann Rocholl	1f45cb0a51	Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.	12 years ago
Johann Rocholl	931a0052ea	Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason.	12 years ago
Johann Rocholl	cec7283b21	Enable QUICK_HOME for deltabot.	12 years ago
Johann Rocholl	c430906d3b	Deltabot settings and configuration adjustments.	12 years ago
daid303	587154c01b	Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.	12 years ago
daid303	f6ff0ab767	signed/unsigned fixes.	12 years ago
daid303	b6ff45254e	Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.	12 years ago
daid303	7e348fcb5f	By mistake enabled the watchdog by default. This should be off by default.	12 years ago
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	12 years ago
Mark Finn	04631d2250	cleanup for pull	12 years ago
ZetaPhoenix	c6caa45ae2	Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.	12 years ago
tonokip	1c1fddc7ac	Added support for the Rambo reprap electronics board. Added Mcodes to set motor current and microstepping pins.	12 years ago
Enchiridion	50cde90324	Added support for dual Z axis stepper drivers	12 years ago
daid	12de8fff81	Support step motor controllers with active low step pins.	13 years ago
Bernhard	0c123950e9	__ header file replace	13 years ago
Bernhard	bf077125b9	added firmware retract. disabled by default	13 years ago
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	13 years ago
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	13 years ago
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	13 years ago
Erik van der Zalm	87ff2f8867	Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)	13 years ago
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	13 years ago
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	13 years ago
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	13 years ago
Erik van der Zalm	8816ef1c64	Small fixes after merge	13 years ago
Erik van der Zalm	b447815de5	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	13 years ago
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	13 years ago
Erik van der Zalm	5113513cb2	RC 1	13 years ago
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	13 years ago

... 7 8 9 10 11

536 Commits (18904c42f6081391c5ffc096c8acf2ce54dc4a34)