Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	c86ee574ec	Drop old comment	5 years ago
Roxy-3D	5d515c3a2f	Adjust for timing shift on Max7219 displays on AVR's Something has shifted. The previous timing delays on the Max7219 debug displays is too tight without this correction. I suspect something has been optimized and roughly 50ns of needed setup and hold time has disappeared. This corrects the issue and the display results are clean again.	5 years ago
Scott Lahteine	118bd2f8b2	Apply loop shorthand macros (#17159 )	5 years ago
Scott Lahteine	6bead0c1b0	Shorter paths to HAL, ExtUI (#17156 )	5 years ago
Scott Lahteine	64d092935b	More useful ENABLED / DISABLED macros (#17054 )	5 years ago
Scott Lahteine	c99773bae0	Max7219 suspend/resume	5 years ago
Scott Lahteine	1da49d0ac5	Non-blocking Max7219 test pattern	5 years ago
Scott Lahteine	fa6e7cb733	Function-style critical section macros	5 years ago
Scott Lahteine	bfad23d3e2	(c) 2020	5 years ago
Dirk O. Kaar	d0e1166cce	Fix Visual Micro "Arduino IDE for Visual Studio" support (#16418 )	5 years ago
Scott Lahteine	941a09b6ac	Fix Max7219 with 256 or more cels	5 years ago
Scott Lahteine	a589456a14	Tweak mark/range/quantity conditions	5 years ago
Scott Lahteine	601b2d9f51	Send slightly less data to Max7219	5 years ago
Scott Lahteine	79f49040f1	Patch some Max7219 comments	5 years ago
Scott Lahteine	5c3ec6306f	Max7219 side-by-side arrangement (#14702 )	5 years ago
Scott Lahteine	a7c41d28af	Max7219 non-functional tweaks	5 years ago
Scott Lahteine	750a16ad38	Fix MIN/MAX function collision with macros	5 years ago
Scott Lahteine	93cd66ac11	Tweaky change from (C) to (c)	5 years ago
Scott Lahteine	0feeef2604	Update copyright in headers	6 years ago
Roxy-3D	d3d6be8210	Add MAX7219 reverse units option (#11860 )	6 years ago
Roxy-3D	0780913848	IDEX Improvements (#11848 )	6 years ago
Scott Lahteine	8f0bbdcc9b	Fix up Max7219 orientations (#11596 )	6 years ago
Scott Lahteine	56f1e17a25	[2.0.x] Max7219 cleanup, simplify, and extend (#11575 )	6 years ago
Roxy-3D	aae4c67e5d	Max7219 Clean Up (#11563 ) Some of the Rotations did not do the right thing with setting and clearing pixels. I think it is correct now. But if not... It is much closer to being correct.	6 years ago
Dave Johnson	c64199941e	Compile only selected PIO environment (#11519 )	6 years ago
Giuliano	eee1b7c50c	[2.0.x] Fix compile error (#11465 ) Address #11463	6 years ago
Scott Lahteine	76d4cfb064	Tweak some Max7219 code	6 years ago
Roxy-3D	db85ca93c4	Change Max7219_idle_task() to use a column instead of row if Y-Axis as 16 LED's	6 years ago
Roxy-3D	9660996cc3	Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285 ) * Add Multi Unit Support for Max7219 to bugfix_2.0.0 * Apply multi-MAX7219 to example configs * Tweak some spacing, macros	6 years ago
Scott Lahteine	229b26b02c	Clear LED matrix without startup test	6 years ago
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034 )	7 years ago
etagle	0566badcef	Add memory barrier, optimal interrupt on-off Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)	7 years ago
Scott Lahteine	99ecdf59af	Smarter MIN, MAX, ABS macros Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`. Co-Authored-By: ejtagle <ejtagle@hotmail.com>	7 years ago
Scott Lahteine	a1062eec5b	Better handling of DELAY_NS and DELAY_US (#10716 ) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	7 years ago
Roxy-3D	c2c02bdc67	Change Max7219 coordinates to traditional (X,Y)	7 years ago
Scott Lahteine	212e52e485	Basic delay for Max7219 on ARM	7 years ago
Karl Andersson	58ca3be1ec	delayMicroseconds() cannot be called in critical section (#10535 ) on the STM32 platform	7 years ago
Luc Van Daele	646aa20b43	Overhaul of G33 Delta Calibration (#8822 )	7 years ago
Roxy-3D	26cc12eaa4	Resolve corruption of Max7219 Debug LED Matrix	7 years ago
Roxy-3D	f5f1b069ad	Convert UBL mesh tilting to all use the same algorithm (#9204 ) A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also. The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.	7 years ago
Scott Lahteine	1ce0fb336b	Patch Max7219_LED_Set input args	7 years ago
Scott Lahteine	32512332df	Apply some formatting	7 years ago
Scott Lahteine	d48cb6bf41	Apply coding standards to Max7219	7 years ago
Scott Lahteine	50f09cc029	Miscellaneous cleanup	7 years ago
Scott Lahteine	ada90f7335	Clean up trailing spaces	7 years ago
Roxy-3D	3f5f39576b	Reprint option for last SD Memory card file (#8106 ) * Re-Print of same SD Memory Card file with single click * Re-Print of same SD Memory Card file with single click * This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104	7 years ago
Roxy-3D	6cb26c98c8	Fix Baby Stepping on 32-Bit platforms (#8001 ) Also, Max7219 debug code was used for this effort. It has been improved and hardened.	7 years ago
Roxy-3D	0e260c6c1d	Get FolgerTech i3-2020 working again with 32-bit platforms (#7944 ) Setup FolgerTech i3-2020 Configuration files as a reference platform for 32-Bit work. Also fix MAX7219 debug lights on 32-bit platforms.	7 years ago
Scott Lahteine	8fbb833de9	Encapsulate RGB(W) LEDs	7 years ago

4 Commits (15f6f53638a6778d22a17e1900fb3a9fdc92dade)