andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

More useful ENABLED / DISABLED macros (#17054)

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
committed by GitHub
parent
5eb6fb1c2f
commit
64d092935b
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
26 changed files with 637 additions and 767 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/Configuration_adv.h
  2. 18
      Marlin/src/HAL/HAL_AVR/MarlinSerial.h
  3. 16
      Marlin/src/HAL/HAL_DUE/MarlinSerial.h
  4. 14
      Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h
  5. 67
      Marlin/src/HAL/shared/MarlinSerial.h
  6. 48
      Marlin/src/MarlinCore.cpp
  7. 134
      Marlin/src/core/drivers.h
  8. 28
      Marlin/src/core/macros.h
  9. 85
      Marlin/src/core/utility.cpp
  10. 22
      Marlin/src/feature/Max7219_Debug_LEDs.cpp
  11. 9
      Marlin/src/feature/babystep.cpp
  12. 12
      Marlin/src/feature/bltouch.cpp
  13. 6
      Marlin/src/feature/power_loss_recovery.h
  14. 58
      Marlin/src/gcode/calibrate/G28.cpp
  15. 8
      Marlin/src/gcode/calibrate/G425.cpp
  16. 109
      Marlin/src/gcode/host/M115.cpp
  17. 124
      Marlin/src/inc/Conditionals_LCD.h
  18. 56
      Marlin/src/inc/Conditionals_adv.h
  19. 305
      Marlin/src/inc/Conditionals_post.h
  20. 33
      Marlin/src/inc/SanityCheck.h
  21. 16
      Marlin/src/lcd/ultralcd.h
  22. 192
      Marlin/src/module/configuration_store.cpp
  23. 24
      Marlin/src/module/motion.cpp
  24. 10
      Marlin/src/module/motion.h
  25. 2
      Marlin/src/module/probe.h
  26. 6
      Marlin/src/sd/cardreader.h

2
Marlin/Configuration_adv.h
View File

@ -1047,7 +1047,7 @@
*/
//#define POWER_LOSS_RECOVERY
#if ENABLED(POWER_LOSS_RECOVERY)
//#define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.

18
Marlin/src/HAL/HAL_AVR/MarlinSerial.h
View File

@ -31,10 +31,10 @@
* Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
*/
#include "../shared/MarlinSerial.h"
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#ifndef SERIAL_PORT
#define SERIAL_PORT 0
#endif
@ -261,12 +261,12 @@
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = RX_BUFFER_SIZE;
static constexpr unsigned int TX_SIZE = TX_BUFFER_SIZE;
static constexpr bool XONOFF = bSERIAL_XON_XOFF;
static constexpr bool EMERGENCYPARSER = bEMERGENCY_PARSER;
static constexpr bool DROPPED_RX = bSERIAL_STATS_DROPPED_RX;
static constexpr bool RX_OVERRUNS = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
static constexpr bool MAX_RX_QUEUED = bSERIAL_STATS_MAX_RX_QUEUED;
static constexpr bool XONOFF = ENABLED(SERIAL_XON_XOFF);
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = ENABLED(SERIAL_STATS_DROPPED_RX);
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
@ -304,7 +304,7 @@
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_OVERRUNS = bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS;
static constexpr bool RX_OVERRUNS = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
};

16
Marlin/src/HAL/HAL_DUE/MarlinSerial.h
View File

@ -27,10 +27,10 @@
* Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti. All right reserved.
*/
#include "../shared/MarlinSerial.h"
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#define DEC 10
#define HEX 16
#define OCT 8
@ -163,12 +163,12 @@ struct MarlinSerialCfg {
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = RX_BUFFER_SIZE;
static constexpr unsigned int TX_SIZE = TX_BUFFER_SIZE;
static constexpr bool XONOFF = bSERIAL_XON_XOFF;
static constexpr bool EMERGENCYPARSER = bEMERGENCY_PARSER;
static constexpr bool DROPPED_RX = bSERIAL_STATS_DROPPED_RX;
static constexpr bool RX_OVERRUNS = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
static constexpr bool MAX_RX_QUEUED = bSERIAL_STATS_MAX_RX_QUEUED;
static constexpr bool XONOFF = ENABLED(SERIAL_XON_XOFF);
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = ENABLED(SERIAL_STATS_DROPPED_RX);
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
#if SERIAL_PORT >= 0

14
Marlin/src/HAL/HAL_LPC1768/inc/SanityCheck.h
View File

@ -57,9 +57,7 @@
* Because PWM hardware channels all share the same frequency, along with the
* fallback software channels, FAST_PWM_FAN is incompatible with Servos.
*/
#if NUM_SERVOS > 0 && ENABLED(FAST_PWM_FAN)
#error "BLTOUCH and Servos are incompatible with FAST_PWM_FAN on LPC176x boards."
#endif
static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are incompatible with FAST_PWM_FAN on LPC176x boards.");
/**
* Test LPC176x-specific configuration values for errors at compile-time.
@ -69,13 +67,13 @@
// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
//#endif
#if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI"
#if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI."
#endif
#endif
#if ENABLED(BAUD_RATE_GCODE)
#error "BAUD_RATE_GCODE is not yet supported on LPC176x."
#endif
static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported on LPC176x.");
/**
* Flag any serial port conflicts

67
Marlin/src/HAL/shared/MarlinSerial.h
View File

@ -1,67 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* HAL/shared/MarlinSerial.h
*/
#include "../../inc/MarlinConfigPre.h"
constexpr bool
#if HAS_DGUS_LCD
bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS = (false
#if ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS)
|| true
#endif
),
#endif
bSERIAL_XON_XOFF = (false
#if ENABLED(SERIAL_XON_XOFF)
|| true
#endif
),
bEMERGENCY_PARSER = (false
#if ENABLED(EMERGENCY_PARSER)
|| true
#endif
),
bSERIAL_STATS_DROPPED_RX = (false
#if ENABLED(SERIAL_STATS_DROPPED_RX)
|| true
#endif
),
bSERIAL_STATS_RX_BUFFER_OVERRUNS = (false
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
|| true
#endif
),
bSERIAL_STATS_RX_FRAMING_ERRORS = (false
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
|| true
#endif
),
bSERIAL_STATS_MAX_RX_QUEUED = (false
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
|| true
#endif
);

48
Marlin/src/MarlinCore.cpp
View File

@ -241,11 +241,8 @@ void setup_powerhold() {
OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_INVERTING);
#endif
#if ENABLED(PSU_CONTROL)
#if ENABLED(PSU_DEFAULT_OFF)
powersupply_on = true; PSU_OFF();
#else
powersupply_on = false; PSU_ON();
#endif
powersupply_on = ENABLED(PSU_DEFAULT_OFF);
if (ENABLED(PSU_DEFAULT_OFF)) PSU_OFF(); else PSU_ON();
#endif
}
@ -425,14 +422,8 @@ void startOrResumeJob() {
switch (card.sdprinting_done_state) {
#if HAS_RESUME_CONTINUE // Display "Click to Continue..."
case 1:
did_state = queue.enqueue_P(PSTR("M0Q1S"
#if HAS_LCD_MENU
"1800" // ...for 30 minutes with LCD
#else
"60" // ...for 1 minute with no LCD
#endif
));
case 1: // 30 min timeout with LCD, 1 min without
did_state = queue.enqueue_P(PSTR("M0Q1S" TERN(HAS_LCD_MENU, "1800", "60")));
break;
#endif
@ -501,31 +492,19 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
}
// Prevent steppers timing-out in the middle of M600
#if BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT)
#define MOVE_AWAY_TEST !did_pause_print
#else
#define MOVE_AWAY_TEST true
#endif
#define STAY_TEST (BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT) && did_pause_print)
if (stepper_inactive_time) {
static bool already_shutdown_steppers; // = false
if (planner.has_blocks_queued())
gcode.reset_stepper_timeout();
else if (MOVE_AWAY_TEST && !ignore_stepper_queue && ELAPSED(ms, gcode.previous_move_ms + stepper_inactive_time)) {
else if (!STAY_TEST && !ignore_stepper_queue && ELAPSED(ms, gcode.previous_move_ms + stepper_inactive_time)) {
if (!already_shutdown_steppers) {
already_shutdown_steppers = true; // L6470 SPI will consume 99% of free time without this
#if ENABLED(DISABLE_INACTIVE_X)
DISABLE_AXIS_X();
#endif
#if ENABLED(DISABLE_INACTIVE_Y)
DISABLE_AXIS_Y();
#endif
#if ENABLED(DISABLE_INACTIVE_Z)
DISABLE_AXIS_Z();
#endif
#if ENABLED(DISABLE_INACTIVE_E)
disable_e_steppers();
#endif
if (ENABLED(DISABLE_INACTIVE_X)) DISABLE_AXIS_X();
if (ENABLED(DISABLE_INACTIVE_Y)) DISABLE_AXIS_Y();
if (ENABLED(DISABLE_INACTIVE_Z)) DISABLE_AXIS_Z();
if (ENABLED(DISABLE_INACTIVE_E)) disable_e_steppers();
#if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL)
if (ubl.lcd_map_control) {
ubl.lcd_map_control = false;
@ -1191,7 +1170,6 @@ void setup() {
*/
void loop() {
do {
idle();
#if ENABLED(SDSUPPORT)
@ -1204,9 +1182,5 @@ void loop() {
endstops.event_handler();
} while (false // Return to caller for best compatibility
#ifdef __AVR__
|| true // Loop forever on slower (AVR) boards
#endif
);
} while (ENABLED(__AVR__)); // Loop forever on slower (AVR) boards
}

134
Marlin/src/core/drivers.h
View File

@ -82,101 +82,97 @@
#define _OR_ADTE(N,T) || AXIS_DRIVER_TYPE_E(N,T)
#define HAS_E_DRIVER(T) (0 RREPEAT2(E_STEPPERS, _OR_ADTE, T))
#define HAS_DRIVER(T) ( AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) \
|| AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) \
|| AXIS_DRIVER_TYPE_Z(T) || AXIS_DRIVER_TYPE_Z2(T) \
|| AXIS_DRIVER_TYPE_Z3(T) || AXIS_DRIVER_TYPE_Z4(T) \
|| HAS_E_DRIVER(T) )
#define HAS_DRIVER(T) ( AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Z(T) \
|| AXIS_DRIVER_TYPE_X2(T) || AXIS_DRIVER_TYPE_Y2(T) || AXIS_DRIVER_TYPE_Z2(T) \
|| AXIS_DRIVER_TYPE_Z3(T) || AXIS_DRIVER_TYPE_Z4(T) || HAS_E_DRIVER(T) )
// Test for supported TMC drivers that require advanced configuration
// Does not match standalone configurations
#define HAS_TRINAMIC_CONFIG ( HAS_DRIVER(TMC2130) \
|| HAS_DRIVER(TMC2160) \
|| HAS_DRIVER(TMC2208) \
|| HAS_DRIVER(TMC2209) \
|| HAS_DRIVER(TMC2660) \
|| HAS_DRIVER(TMC5130) \
|| HAS_DRIVER(TMC5160) )
#if ( HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2160) \
|| HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2209) \
|| HAS_DRIVER(TMC2660) \
|| HAS_DRIVER(TMC5130) || HAS_DRIVER(TMC5160) )
#define HAS_TRINAMIC_CONFIG 1
#endif
#define HAS_TRINAMIC HAS_TRINAMIC_CONFIG
#define HAS_TRINAMIC_STANDALONE ( HAS_DRIVER(TMC2130_STANDALONE) \
|| HAS_DRIVER(TMC2208_STANDALONE) \
|| HAS_DRIVER(TMC2209_STANDALONE) \
|| HAS_DRIVER(TMC26X_STANDALONE) \
|| HAS_DRIVER(TMC2660_STANDALONE) \
|| HAS_DRIVER(TMC5130_STANDALONE) \
|| HAS_DRIVER(TMC5160_STANDALONE) \
|| HAS_DRIVER(TMC2160_STANDALONE) )
#if ( HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2160_STANDALONE) \
|| HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC2209_STANDALONE) \
|| HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) \
|| HAS_DRIVER(TMC5130_STANDALONE) || HAS_DRIVER(TMC5160_STANDALONE) )
#define HAS_TRINAMIC_STANDALONE 1
#endif
#define HAS_TMCX1X0 ( HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2160) \
|| HAS_DRIVER(TMC5130) || HAS_DRIVER(TMC5160))
#if HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2160) || HAS_DRIVER(TMC5130) || HAS_DRIVER(TMC5160)
#define HAS_TMCX1X0 1
#endif
#define HAS_TMC220x (HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2209))
#if HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2209)
#define HAS_TMC220x 1
#endif
#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE(A,TMC2130) \
|| AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2208) \
|| AXIS_DRIVER_TYPE(A,TMC2209) \
#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE(A,TMC2130) || AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2208) || AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC2660) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) )
|| AXIS_DRIVER_TYPE(A,TMC5130) || AXIS_DRIVER_TYPE(A,TMC5160) )
// Test for a driver that uses SPI - this allows checking whether a _CS_ pin
// is considered sensitive
#define AXIS_HAS_SPI(A) ( AXIS_DRIVER_TYPE(A,TMC2130) \
|| AXIS_DRIVER_TYPE(A,TMC2160) \
#define AXIS_HAS_SPI(A) ( AXIS_DRIVER_TYPE(A,TMC2130) || AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2660) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) )
|| AXIS_DRIVER_TYPE(A,TMC5130) || AXIS_DRIVER_TYPE(A,TMC5160) )
#define AXIS_HAS_UART(A) ( AXIS_DRIVER_TYPE(A,TMC2208) \
|| AXIS_DRIVER_TYPE(A,TMC2209) )
#define AXIS_HAS_UART(A) ( AXIS_DRIVER_TYPE(A,TMC2208) || AXIS_DRIVER_TYPE(A,TMC2209) )
#define AXIS_HAS_RXTX AXIS_HAS_UART
#define AXIS_HAS_SW_SERIAL(A) ((AXIS_HAS_UART(A) && !defined(A##_HARDWARE_SERIAL)))
#define AXIS_HAS_SW_SERIAL(A) ( AXIS_HAS_UART(A) && !defined(A##_HARDWARE_SERIAL) )
#define AXIS_HAS_STALLGUARD(A) ( AXIS_DRIVER_TYPE(A,TMC2130) \
|| AXIS_DRIVER_TYPE(A,TMC2160) \
#define AXIS_HAS_STALLGUARD(A) ( AXIS_DRIVER_TYPE(A,TMC2130) || AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC2660) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) )
|| AXIS_DRIVER_TYPE(A,TMC5130) || AXIS_DRIVER_TYPE(A,TMC5160) )
#define AXIS_HAS_STEALTHCHOP(A) ( AXIS_DRIVER_TYPE(A,TMC2130) \
|| AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2208) \
|| AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) )
#define AXIS_HAS_STEALTHCHOP(A) ( AXIS_DRIVER_TYPE(A,TMC2130) || AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2208) || AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC5130) || AXIS_DRIVER_TYPE(A,TMC5160) )
#define AXIS_HAS_SG_RESULT(A) ( AXIS_DRIVER_TYPE(A,TMC2130) \
|| AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2208) \
|| AXIS_DRIVER_TYPE(A,TMC2209) )
#define AXIS_HAS_SG_RESULT(A) ( AXIS_DRIVER_TYPE(A,TMC2130) || AXIS_DRIVER_TYPE(A,TMC2160) \
|| AXIS_DRIVER_TYPE(A,TMC2208) || AXIS_DRIVER_TYPE(A,TMC2209) )
#define AXIS_HAS_COOLSTEP(A) ( AXIS_DRIVER_TYPE(A,TMC2130) \
|| AXIS_DRIVER_TYPE(A,TMC2209) \
|| AXIS_DRIVER_TYPE(A,TMC5130) \
|| AXIS_DRIVER_TYPE(A,TMC5160) )
|| AXIS_DRIVER_TYPE(A,TMC5130) || AXIS_DRIVER_TYPE(A,TMC5160) )
#define _OR_EAH(N,T) || AXIS_HAS_##T(E##N)
#define E_AXIS_HAS(T) (0 _OR_EAH(0,T) _OR_EAH(1,T) _OR_EAH(2,T) _OR_EAH(3,T) _OR_EAH(4,T) _OR_EAH(5,T) _OR_EAH(6,T) _OR_EAH(7,T))
#define ANY_AXIS_HAS(T) ( AXIS_HAS_##T(X) || AXIS_HAS_##T(X2) \
|| AXIS_HAS_##T(Y) || AXIS_HAS_##T(Y2) \
|| AXIS_HAS_##T(Z) || AXIS_HAS_##T(Z2) \
|| AXIS_HAS_##T(Z3) || AXIS_HAS_##T(Z4) \
|| E_AXIS_HAS(T) )
#define HAS_STEALTHCHOP ANY_AXIS_HAS(STEALTHCHOP)
#define HAS_STALLGUARD ANY_AXIS_HAS(STALLGUARD)
#define HAS_SG_RESULT ANY_AXIS_HAS(SG_RESULT)
#define HAS_COOLSTEP ANY_AXIS_HAS(COOLSTEP)
#define HAS_TMC_UART ANY_AXIS_HAS(RXTX)
#define HAS_TMC_SPI ANY_AXIS_HAS(SPI)
#define HAS_TMC_SW_SERIAL ANY_AXIS_HAS(SW_SERIAL)
#define ANY_AXIS_HAS(T) ( AXIS_HAS_##T(X) || AXIS_HAS_##T(Y) || AXIS_HAS_##T(Z) \
|| AXIS_HAS_##T(X2) || AXIS_HAS_##T(Y2) || AXIS_HAS_##T(Z2) \
|| AXIS_HAS_##T(Z3) || AXIS_HAS_##T(Z4) || E_AXIS_HAS(T) )
#if ANY_AXIS_HAS(STEALTHCHOP)
#define HAS_STEALTHCHOP 1
#endif
#if ANY_AXIS_HAS(STALLGUARD)
#define HAS_STALLGUARD 1
#endif
#if ANY_AXIS_HAS(SG_RESULT)
#define HAS_SG_RESULT 1
#endif
#if ANY_AXIS_HAS(COOLSTEP)
#define HAS_COOLSTEP 1
#endif
#if ANY_AXIS_HAS(RXTX)
#define HAS_TMC_UART 1
#endif
#if ANY_AXIS_HAS(SPI)
#define HAS_TMC_SPI 1
#endif
// Defines that can't be evaluated now
#define HAS_TMC_SW_SERIAL ANY_AXIS_HAS(SW_SERIAL)
//
// Stretching 'drivers.h' to include LPC/SAMD51 SD options
@ -187,7 +183,11 @@
#define _SDCARD_ID(V) _CAT(_SDCARD_, V)
#define SD_CONNECTION_IS(V) (_SDCARD_ID(SDCARD_CONNECTION) == _SDCARD_ID(V))
#define HAS_L64XX (HAS_DRIVER(L6470) || HAS_DRIVER(L6474) || HAS_DRIVER(L6480) || HAS_DRIVER(POWERSTEP01))
#define HAS_L64XX_NOT_L6474 (HAS_L64XX && !HAS_DRIVER(L6474))
#if HAS_DRIVER(L6470) || HAS_DRIVER(L6474) || HAS_DRIVER(L6480) || HAS_DRIVER(POWERSTEP01)
#define HAS_L64XX 1
#endif
#if HAS_L64XX && !HAS_DRIVER(L6474)
#define HAS_L64XX_NOT_L6474 1
#endif
#define AXIS_IS_L64XX(A) (AXIS_DRIVER_TYPE_##A(L6470) || AXIS_DRIVER_TYPE_##A(L6474) || AXIS_DRIVER_TYPE_##A(L6480) || AXIS_DRIVER_TYPE_##A(POWERSTEP01))

28
Marlin/src/core/macros.h
View File

@ -177,18 +177,23 @@
// Macros to support option testing
#define _CAT(a,V...) a##V
#define CAT(a,V...) _CAT(a,V)
#define SWITCH_ENABLED_false 0
#define SWITCH_ENABLED_true 1
#define SWITCH_ENABLED_0 0
#define SWITCH_ENABLED_1 1
#define SWITCH_ENABLED_0x0 0
#define SWITCH_ENABLED_0x1 1
#define SWITCH_ENABLED_ 1
#define _ENA_1(O) _CAT(SWITCH_ENABLED_, O)
#define _DIS_1(O) !_ENA_1(O)
#define _ISENA_ ~,1
#define _ISENA_1 ~,1
#define _ISENA_0x1 ~,1
#define _ISENA_true ~,1
#define _ISENA(V...) IS_PROBE(V)
#define _ENA_1(O) _ISENA(CAT(_IS,CAT(ENA_, O)))
#define _DIS_1(O) NOT(_ENA_1(O))
#define ENABLED(V...) DO(ENA,&&,V)
#define DISABLED(V...) DO(DIS,&&,V)
#define TERN(O,A,B) _TERN(_ENA_1(O),B,A) // OPTION converted to to '0' or '1'
#define _TERN(E,V...) __TERN(_CAT(T_,E),V) // Prepend 'T_' to get 'T_0' or 'T_1'
#define __TERN(T,V...) ___TERN(_CAT(_NO,T),V) // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
#define ___TERN(P,V...) THIRD(P,V) // If first argument has a comma, A. Else B.
#define ANY(V...) !DISABLED(V)
#define NONE(V...) DISABLED(V)
#define ALL(V...) ENABLED(V)
@ -390,8 +395,9 @@
//
// Primitives supporting precompiler REPEAT
//
#define FIRST(a,...) a
#define SECOND(a,b,...) b
#define FIRST(a,...) a
#define SECOND(a,b,...) b
#define THIRD(a,b,c,...) c
// Defer expansion
#define EMPTY()

85
Marlin/src/core/utility.cpp
View File

@ -57,39 +57,23 @@ void safe_delay(millis_t ms) {
void log_machine_info() {
SERIAL_ECHOLNPGM("Machine Type: "
#if ENABLED(DELTA)
"Delta"
#elif IS_SCARA
"SCARA"
#elif IS_CORE
"Core"
#else
"Cartesian"
#endif
TERN(DELTA, "Delta", "")
TERN(IS_SCARA, "SCARA", "")
TERN(IS_CORE, "Core", "")
TERN(IS_CARTESIAN, "Cartesian", "")
);
SERIAL_ECHOLNPGM("Probe: "
#if ENABLED(PROBE_MANUALLY)
"PROBE_MANUALLY"
#elif ENABLED(NOZZLE_AS_PROBE)
"NOZZLE_AS_PROBE"
#elif ENABLED(FIX_MOUNTED_PROBE)
"FIX_MOUNTED_PROBE"
#elif ENABLED(BLTOUCH)
"BLTOUCH"
#elif HAS_Z_SERVO_PROBE
"SERVO PROBE"
#elif ENABLED(TOUCH_MI_PROBE)
"TOUCH_MI_PROBE"
#elif ENABLED(Z_PROBE_SLED)
"Z_PROBE_SLED"
#elif ENABLED(Z_PROBE_ALLEN_KEY)
"Z_PROBE_ALLEN_KEY"
#elif ENABLED(SOLENOID_PROBE)
"SOLENOID_PROBE"
#else
"NONE"
#endif
TERN(PROBE_MANUALLY, "PROBE_MANUALLY", "")
TERN(NOZZLE_AS_PROBE, "NOZZLE_AS_PROBE", "")
TERN(FIX_MOUNTED_PROBE, "FIX_MOUNTED_PROBE", "")
TERN(BLTOUCH, "BLTOUCH", "")
TERN(HAS_Z_SERVO_PROBE, TERN(BLTOUCH, "BLTOUCH", "SERVO PROBE"), "")
TERN(TOUCH_MI_PROBE, "TOUCH_MI_PROBE", "")
TERN(Z_PROBE_SLED, "Z_PROBE_SLED", "")
TERN(Z_PROBE_ALLEN_KEY, "Z_PROBE_ALLEN_KEY", "")
TERN(SOLENOID_PROBE, "SOLENOID_PROBE", "")
TERN(PROBE_SELECTED, "", "NONE")
);
#if HAS_BED_PROBE
@ -107,20 +91,10 @@ void safe_delay(millis_t ms) {
else
SERIAL_ECHOPGM(" (Aligned With");
if (probe.offset_xy.y > 0) {
#if IS_SCARA
SERIAL_ECHOPGM("-Distal");
#else
SERIAL_ECHOPGM("-Back");
#endif
}
else if (probe.offset_xy.y < 0) {
#if IS_SCARA
SERIAL_ECHOPGM("-Proximal");
#else
SERIAL_ECHOPGM("-Front");
#endif
}
if (probe.offset_xy.y > 0)
serialprintPGM(ENABLED(IS_SCARA) ? PSTR("-Distal") : PSTR("-Back"));
else if (probe.offset_xy.y < 0)
serialprintPGM(ENABLED(IS_SCARA) ? PSTR("-Proximal") : PSTR("-Front"));
else if (probe.offset_xy.x != 0)
SERIAL_ECHOPGM("-Center");
@ -128,27 +102,18 @@ void safe_delay(millis_t ms) {
#endif
if (probe.offset.z < 0)
SERIAL_ECHOPGM("Below");
else if (probe.offset.z > 0)
SERIAL_ECHOPGM("Above");
else
SERIAL_ECHOPGM("Same Z as");
serialprintPGM(probe.offset.z < 0 ? PSTR("Below") : probe.offset.z > 0 ? PSTR("Above") : PSTR("Same Z as"));
SERIAL_ECHOLNPGM(" Nozzle)");
#endif
#if HAS_ABL_OR_UBL
SERIAL_ECHOPGM("Auto Bed Leveling: ");
#if ENABLED(AUTO_BED_LEVELING_LINEAR)
SERIAL_ECHOLNPGM("LINEAR");
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
SERIAL_ECHOLNPGM("BILINEAR");
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
SERIAL_ECHOLNPGM("3POINT");
#elif ENABLED(AUTO_BED_LEVELING_UBL)
SERIAL_ECHOLNPGM("UBL");
#endif
SERIAL_ECHOPGM("Auto Bed Leveling: "
TERN(AUTO_BED_LEVELING_LINEAR, "LINEAR", "")
TERN(AUTO_BED_LEVELING_BILINEAR, "BILINEAR", "")
TERN(AUTO_BED_LEVELING_3POINT, "3POINT", "")
TERN(AUTO_BED_LEVELING_UBL, "UBL", "")
);
if (planner.leveling_active) {
SERIAL_ECHOLNPGM(" (enabled)");

22
Marlin/src/feature/Max7219_Debug_LEDs.cpp
View File

@ -48,24 +48,16 @@
#include "../MarlinCore.h"
#include "../HAL/shared/Delay.h"
#define HAS_SIDE_BY_SIDE (ENABLED(MAX7219_SIDE_BY_SIDE) && MAX7219_NUMBER_UNITS > 1)
#if ENABLED(MAX7219_SIDE_BY_SIDE) && MAX7219_NUMBER_UNITS > 1
#define HAS_SIDE_BY_SIDE 1
#endif
#if _ROT == 0 || _ROT == 180
#if HAS_SIDE_BY_SIDE
#define MAX7219_X_LEDS 8
#define MAX7219_Y_LEDS MAX7219_LINES
#else
#define MAX7219_Y_LEDS 8
#define MAX7219_X_LEDS MAX7219_LINES
#endif
#define MAX7219_X_LEDS TERN(HAS_SIDE_BY_SIDE, 8, MAX7219_LINES)
#define MAX7219_Y_LEDS TERN(HAS_SIDE_BY_SIDE, MAX7219_LINES, 8)
#elif _ROT == 90 || _ROT == 270
#if HAS_SIDE_BY_SIDE
#define MAX7219_Y_LEDS 8
#define MAX7219_X_LEDS MAX7219_LINES
#else
#define MAX7219_X_LEDS 8
#define MAX7219_Y_LEDS MAX7219_LINES
#endif
#define MAX7219_X_LEDS TERN(HAS_SIDE_BY_SIDE, MAX7219_LINES, 8)
#define MAX7219_Y_LEDS TERN(HAS_SIDE_BY_SIDE, 8, MAX7219_LINES)
#else
#error "MAX7219_ROTATE must be a multiple of +/- 90°."
#endif

9
Marlin/src/feature/babystep.cpp
View File

@ -55,14 +55,7 @@ void Babystep::add_mm(const AxisEnum axis, const float &mm) {
void Babystep::add_steps(const AxisEnum axis, const int16_t distance) {
#if ENABLED(BABYSTEP_WITHOUT_HOMING)
#define CAN_BABYSTEP(AXIS) true
#else
extern uint8_t axis_known_position;
#define CAN_BABYSTEP(AXIS) TEST(axis_known_position, AXIS)
#endif
if (!CAN_BABYSTEP(axis)) return;
if (DISABLED(BABYSTEP_WITHOUT_HOMING) && !TEST(axis_known_position, axis)) return;
accum += distance; // Count up babysteps for the UI
#if ENABLED(BABYSTEP_DISPLAY_TOTAL)

12
Marlin/src/feature/bltouch.cpp
View File

@ -73,20 +73,12 @@ void BLTouch::init(const bool set_voltage/*=false*/) {
);
}
const bool should_set = last_written_mode != (false
#if ENABLED(BLTOUCH_SET_5V_MODE)
|| true
#endif
);
const bool should_set = last_written_mode != ENABLED(BLTOUCH_SET_5V_MODE);
#endif
if (should_set && set_voltage)
mode_conv_proc((false
#if ENABLED(BLTOUCH_SET_5V_MODE)
|| true
#endif
));
mode_conv_proc(ENABLED(BLTOUCH_SET_5V_MODE));
}
void BLTouch::clear() {

6
Marlin/src/feature/power_loss_recovery.h
View File

@ -159,11 +159,7 @@ class PrintJobRecovery {
static inline void cancel() { purge(); card.autostart_index = 0; }
static void load();
static void save(const bool force=false
#if ENABLED(SAVE_EACH_CMD_MODE)
|| true
#endif
);
static void save(const bool force=ENABLED(SAVE_EACH_CMD_MODE));
#if PIN_EXISTS(POWER_LOSS)
static inline void outage() {

58
Marlin/src/gcode/calibrate/G28.cpp
View File

@ -62,13 +62,7 @@
current_position.set(0.0, 0.0);
sync_plan_position();
const int x_axis_home_dir =
#if ENABLED(DUAL_X_CARRIAGE)
x_home_dir(active_extruder)
#else
home_dir(X_AXIS)
#endif
;
const int x_axis_home_dir = x_home_dir(active_extruder);
const float mlx = max_length(X_AXIS),
mly = max_length(Y_AXIS),
@ -310,6 +304,8 @@ void GcodeSuite::G28() {
#if ENABLED(DELTA)
constexpr bool doZ = true; // for NANODLP_Z_SYNC if your DLP is on a DELTA
home_delta();
#if ENABLED(IMPROVE_HOMING_RELIABILITY)
@ -330,12 +326,10 @@ void GcodeSuite::G28() {
#endif
const float z_homing_height = (
#if ENABLED(UNKNOWN_Z_NO_RAISE)
!TEST(axis_known_position, Z_AXIS) ? 0 :
#endif
(parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT)
);
const float z_homing_height =
(DISABLED(UNKNOWN_Z_NO_RAISE) || TEST(axis_known_position, Z_AXIS))
? (parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT)
: 0;
if (z_homing_height && (doX || doY)) {
// Raise Z before homing any other axes and z is not already high enough (never lower z)
@ -355,20 +349,13 @@ void GcodeSuite::G28() {
// Home Y (before X)
#if ENABLED(HOME_Y_BEFORE_X)
if (doY
#if ENABLED(CODEPENDENT_XY_HOMING)
|| doX
#endif
) homeaxis(Y_AXIS);
if (doY || (doX && ENABLED(CODEPENDENT_XY_HOMING)))
homeaxis(Y_AXIS);
#endif
// Home X
if (doX
#if ENABLED(CODEPENDENT_XY_HOMING) && DISABLED(HOME_Y_BEFORE_X)
|| doY
#endif
) {
if (doX || (doY && ENABLED(CODEPENDENT_XY_HOMING) && DISABLED(HOME_Y_BEFORE_X))) {
#if ENABLED(DUAL_X_CARRIAGE)
@ -396,9 +383,8 @@ void GcodeSuite::G28() {
}
// Home Y (after X)
#if DISABLED(HOME_Y_BEFORE_X)
if (doY) homeaxis(Y_AXIS);
#endif
if (DISABLED(HOME_Y_BEFORE_X) && doY)
homeaxis(Y_AXIS);
#if ENABLED(IMPROVE_HOMING_RELIABILITY)
end_slow_homing(slow_homing);
@ -487,7 +473,7 @@ void GcodeSuite::G28() {
do_blocking_move_to_z(delta_clip_start_height);
#endif
#if HAS_LEVELING && ENABLED(RESTORE_LEVELING_AFTER_G28)
#if ENABLED(RESTORE_LEVELING_AFTER_G28)
set_bed_leveling_enabled(leveling_was_active);
#endif
@ -495,12 +481,7 @@ void GcodeSuite::G28() {
// Restore the active tool after homing
#if HOTENDS > 1 && (DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE))
#if EITHER(PARKING_EXTRUDER, DUAL_X_CARRIAGE)
#define NO_FETCH false // fetch the previous toolhead
#else
#define NO_FETCH true
#endif
tool_change(old_tool_index, NO_FETCH);
tool_change(old_tool_index, NONE(PARKING_EXTRUDER, DUAL_X_CARRIAGE)); // Do move if one of these
#endif
#if HAS_HOMING_CURRENT
@ -523,15 +504,8 @@ void GcodeSuite::G28() {
report_current_position();
#if ENABLED(NANODLP_Z_SYNC)
#if ENABLED(NANODLP_ALL_AXIS)
#define _HOME_SYNC true // For any axis, output sync text.
#else
#define _HOME_SYNC doZ // Only for Z-axis
#endif
if (_HOME_SYNC)
SERIAL_ECHOLNPGM(STR_Z_MOVE_COMP);
#endif
if (ENABLED(NANODLP_Z_SYNC) && (doZ || ENABLED(NANODLP_ALL_AXIS)))
SERIAL_ECHOLNPGM(STR_Z_MOVE_COMP);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("<<< G28");

8
Marlin/src/gcode/calibrate/G425.cpp
View File

@ -56,8 +56,12 @@
#define CALIBRATION_MEASUREMENT_CERTAIN 0.5 // mm
#endif
#define HAS_X_CENTER BOTH(CALIBRATION_MEASURE_LEFT, CALIBRATION_MEASURE_RIGHT)
#define HAS_Y_CENTER BOTH(CALIBRATION_MEASURE_FRONT, CALIBRATION_MEASURE_BACK)
#if BOTH(CALIBRATION_MEASURE_LEFT, CALIBRATION_MEASURE_RIGHT)
#define HAS_X_CENTER 1
#endif
#if BOTH(CALIBRATION_MEASURE_FRONT, CALIBRATION_MEASURE_BACK)
#define HAS_Y_CENTER 1
#endif
enum side_t : uint8_t { TOP, RIGHT, FRONT, LEFT, BACK, NUM_SIDES };

109
Marlin/src/gcode/host/M115.cpp
View File

@ -54,39 +54,19 @@ void GcodeSuite::M115() {
#endif
// SERIAL_XON_XOFF
cap_line(PSTR("SERIAL_XON_XOFF")
#if ENABLED(SERIAL_XON_XOFF)
, true
#endif
);
cap_line(PSTR("SERIAL_XON_XOFF"), ENABLED(SERIAL_XON_XOFF));
// BINARY_FILE_TRANSFER (M28 B1)
cap_line(PSTR("BINARY_FILE_TRANSFER")
#if ENABLED(BINARY_FILE_TRANSFER)
, true
#endif
);
cap_line(PSTR("BINARY_FILE_TRANSFER"), ENABLED(BINARY_FILE_TRANSFER));
// EEPROM (M500, M501)
cap_line(PSTR("EEPROM")
#if ENABLED(EEPROM_SETTINGS)
, true
#endif
);
cap_line(PSTR("EEPROM"), ENABLED(EEPROM_SETTINGS));
// Volumetric Extrusion (M200)
cap_line(PSTR("VOLUMETRIC")
#if DISABLED(NO_VOLUMETRICS)
, true
#endif
);
cap_line(PSTR("VOLUMETRIC"), DISABLED(NO_VOLUMETRICS));
// AUTOREPORT_TEMP (M155)
cap_line(PSTR("AUTOREPORT_TEMP")
#if ENABLED(AUTO_REPORT_TEMPERATURES)
, true
#endif
);
cap_line(PSTR("AUTOREPORT_TEMP"), ENABLED(AUTO_REPORT_TEMPERATURES));
// PROGRESS (M530 S L, M531 <file>, M532 X L)
cap_line(PSTR("PROGRESS"));
@ -95,93 +75,42 @@ void GcodeSuite::M115() {
cap_line(PSTR("PRINT_JOB"), true);
// AUTOLEVEL (G29)
cap_line(PSTR("AUTOLEVEL")
#if HAS_AUTOLEVEL
, true
#endif
);
cap_line(PSTR("AUTOLEVEL"), ENABLED(HAS_AUTOLEVEL));
// Z_PROBE (G30)
cap_line(PSTR("Z_PROBE")
#if HAS_BED_PROBE
, true
#endif
);
cap_line(PSTR("Z_PROBE"), ENABLED(HAS_BED_PROBE));
// MESH_REPORT (M420 V)
cap_line(PSTR("LEVELING_DATA")
#if HAS_LEVELING
, true
#endif
);
cap_line(PSTR("LEVELING_DATA"), ENABLED(HAS_LEVELING));
// BUILD_PERCENT (M73)
cap_line(PSTR("BUILD_PERCENT")
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
, true
#endif
);
cap_line(PSTR("BUILD_PERCENT"), ENABLED(LCD_SET_PROGRESS_MANUALLY));
// SOFTWARE_POWER (M80, M81)
cap_line(PSTR("SOFTWARE_POWER")
#if ENABLED(PSU_CONTROL)
, true
#endif
);
cap_line(PSTR("SOFTWARE_POWER"), ENABLED(PSU_CONTROL));
// CASE LIGHTS (M355)
cap_line(PSTR("TOGGLE_LIGHTS")
#if HAS_CASE_LIGHT
, true
#endif
);
cap_line(PSTR("CASE_LIGHT_BRIGHTNESS")
#if HAS_CASE_LIGHT
, PWM_PIN(CASE_LIGHT_PIN)
#endif
);
cap_line(PSTR("TOGGLE_LIGHTS"), ENABLED(HAS_CASE_LIGHT));
cap_line(PSTR("CASE_LIGHT_BRIGHTNESS"), TERN(HAS_CASE_LIGHT, PWM_PIN(CASE_LIGHT_PIN), 0));
// EMERGENCY_PARSER (M108, M112, M410, M876)
cap_line(PSTR("EMERGENCY_PARSER")
#if ENABLED(EMERGENCY_PARSER)
, true
#endif
);
cap_line(PSTR("EMERGENCY_PARSER"), ENABLED(EMERGENCY_PARSER));
// PROMPT SUPPORT (M876)
cap_line(PSTR("PROMPT_SUPPORT")
#if ENABLED(HOST_PROMPT_SUPPORT)
, true
#endif
);
cap_line(PSTR("PROMPT_SUPPORT"), ENABLED(HOST_PROMPT_SUPPORT));
// AUTOREPORT_SD_STATUS (M27 extension)
cap_line(PSTR("AUTOREPORT_SD_STATUS")
#if ENABLED(AUTO_REPORT_SD_STATUS)
, true
#endif
);
cap_line(PSTR("AUTOREPORT_SD_STATUS"), ENABLED(AUTO_REPORT_SD_STATUS));
// THERMAL_PROTECTION
cap_line(PSTR("THERMAL_PROTECTION")
#if (ENABLED(THERMAL_PROTECTION_HOTENDS) || !EXTRUDERS) && (ENABLED(THERMAL_PROTECTION_BED) || !HAS_HEATED_BED) && (ENABLED(THERMAL_PROTECTION_CHAMBER) || !HAS_HEATED_CHAMBER)
, true
#endif
);
cap_line(PSTR("THERMAL_PROTECTION"), ENABLED(THERMALLY_SAFE));
// MOTION_MODES (M80-M89)
cap_line(PSTR("MOTION_MODES")
#if ENABLED(GCODE_MOTION_MODES)
, true
#endif
);
cap_line(PSTR("MOTION_MODES"), ENABLED(GCODE_MOTION_MODES));
// CHAMBER_TEMPERATURE (M141, M191)
cap_line(PSTR("CHAMBER_TEMPERATURE")
#if HAS_HEATED_CHAMBER
, true
#endif
);
cap_line(PSTR("CHAMBER_TEMPERATURE"), ENABLED(HAS_HEATED_CHAMBER));
#endif // EXTENDED_CAPABILITIES_REPORT
}

124
Marlin/src/inc/Conditionals_LCD.h
View File

@ -26,6 +26,15 @@
* Conditionals that need to be set before Configuration_adv.h or pins.h
*/
#if ENABLED(MORGAN_SCARA)
#define IS_SCARA 1
#define IS_KINEMATIC 1
#elif ENABLED(DELTA)
#define IS_KINEMATIC 1
#else
#define IS_CARTESIAN 1
#endif
#if ENABLED(CARTESIO_UI)
#define DOGLCD
@ -193,7 +202,9 @@
#endif
// 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
#define HAS_SSD1306_OLED_I2C ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
#if ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
#define HAS_SSD1306_OLED_I2C 1
#endif
#if HAS_SSD1306_OLED_I2C
#define IS_ULTRA_LCD
#define DOGLCD
@ -347,19 +358,34 @@
#endif
// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
#if ANY(MALYAN_LCD, DGUS_LCD, TOUCH_UI_FTDI_EVE)
#if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define HAS_DGUS_LCD 1
#endif
#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE)
#define IS_EXTUI
#define EXTENSIBLE_UI
#endif
// Aliases for LCD features
#define HAS_SPI_LCD ENABLED(ULTRA_LCD)
#define HAS_DISPLAY (HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI))
#define HAS_GRAPHICAL_LCD ENABLED(DOGLCD)
#define HAS_CHARACTER_LCD (HAS_SPI_LCD && !HAS_GRAPHICAL_LCD)
#define HAS_LCD_MENU (ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS))
#define HAS_ADC_BUTTONS ENABLED(ADC_KEYPAD)
#define HAS_DGUS_LCD ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
#define HAS_DISPLAY 1
#if ENABLED(ULTRA_LCD)
#define HAS_SPI_LCD 1
#if ENABLED(DOGLCD)
#define HAS_GRAPHICAL_LCD 1
#else
#define HAS_CHARACTER_LCD 1
#endif
#endif
#endif
#if ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS)
#define HAS_LCD_MENU 1
#endif
#if ENABLED(ADC_KEYPAD)
#define HAS_ADC_BUTTONS 1
#endif
#if HAS_GRAPHICAL_LCD
#ifndef LCD_PIXEL_WIDTH
@ -447,12 +473,17 @@
#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1, v1, v1)
#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR))
#define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
#define DO_SWITCH_EXTRUDER 1
#endif
#define HAS_DUPLICATION_MODE EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
#ifdef SWITCHING_NOZZLE_E1_SERVO_NR
#define SWITCHING_NOZZLE_TWO_SERVOS 1
#endif
#define HAS_HOTEND_OFFSET (HOTENDS > 1)
#if HOTENDS > 1
#define HAS_HOTEND_OFFSET 1
#endif
/**
* Default hotend offsets, if not defined
@ -509,6 +540,10 @@
#endif
#endif
#ifndef NUM_SERVOS
#define NUM_SERVOS 0
#endif
#ifndef PREHEAT_1_LABEL
#define PREHEAT_1_LABEL "PLA"
#endif
@ -520,8 +555,12 @@
/**
* Set a flag for a servo probe (or BLTouch)
*/
#define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0)
#define HAS_SERVO_ANGLES (HAS_Z_SERVO_PROBE || EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE))
#if defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0
#define HAS_Z_SERVO_PROBE 1
#endif
#if HAS_Z_SERVO_PROBE || EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
#define HAS_SERVO_ANGLES 1
#endif
#if !HAS_SERVO_ANGLES
#undef EDITABLE_SERVO_ANGLES
#endif
@ -529,20 +568,31 @@
/**
* Set flags for enabled probes
*/
#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
#define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
#if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE)
#define HAS_BED_PROBE 1
#endif
#if HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
#define PROBE_SELECTED 1
#endif
#if HAS_BED_PROBE
#define HAS_PROBE_XY_OFFSET DISABLED(NOZZLE_AS_PROBE)
#define HAS_CUSTOM_PROBE_PIN DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define HOMING_Z_WITH_PROBE (Z_HOME_DIR < 0 && !HAS_CUSTOM_PROBE_PIN)
#if DISABLED(NOZZLE_AS_PROBE)
#define HAS_PROBE_XY_OFFSET 1
#endif
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define HAS_CUSTOM_PROBE_PIN 1
#endif
#if Z_HOME_DIR < 0 && !HAS_CUSTOM_PROBE_PIN
#define HOMING_Z_WITH_PROBE 1
#endif
#ifndef Z_PROBE_LOW_POINT
#define Z_PROBE_LOW_POINT -5
#endif
#if ENABLED(Z_PROBE_ALLEN_KEY)
#define PROBE_TRIGGERED_WHEN_STOWED_TEST // Extra test for Allen Key Probe
#define PROBE_TRIGGERED_WHEN_STOWED_TEST 1 // Extra test for Allen Key Probe
#endif
#ifdef MULTIPLE_PROBING
#if MULTIPLE_PROBING > 1
#if EXTRA_PROBING
#define TOTAL_PROBING (MULTIPLE_PROBING + EXTRA_PROBING)
#else
@ -558,23 +608,6 @@
#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
#endif
#define HAS_EXTRA_ENDSTOPS ANY(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_MULTI_ENDSTOPS)
#define HAS_SOFTWARE_ENDSTOPS EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
#define HAS_RESUME_CONTINUE ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
#define HAS_COLOR_LEDS ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
#define HAS_LEDS_OFF_FLAG (BOTH(PRINTER_EVENT_LEDS, SDSUPPORT) && HAS_RESUME_CONTINUE)
#define HAS_PRINT_PROGRESS EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
#define HAS_PRINT_PROGRESS_PERMYRIAD (HAS_PRINT_PROGRESS && EITHER(PRINT_PROGRESS_SHOW_DECIMALS, SHOW_REMAINING_TIME))
#define HAS_SERVICE_INTERVALS (ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0))
#define HAS_FILAMENT_SENSOR ENABLED(FILAMENT_RUNOUT_SENSOR)
#define HAS_GAMES ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAME_MENU (1 < ENABLED(MARLIN_BRICKOUT) + ENABLED(MARLIN_INVADERS) + ENABLED(MARLIN_SNAKE) + ENABLED(MARLIN_MAZE))
#define IS_SCARA ENABLED(MORGAN_SCARA)
#define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
#define IS_CARTESIAN !IS_KINEMATIC
#ifndef INVERT_X_DIR
#define INVERT_X_DIR false
#endif
@ -592,16 +625,15 @@
#define BOOT_MARLIN_LOGO_SMALL
#endif
#define IS_RE_ARM_BOARD MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
// Linear advance uses Jerk since E is an isolated axis
#define HAS_LINEAR_E_JERK (DISABLED(CLASSIC_JERK) && ENABLED(LIN_ADVANCE))
// This flag indicates some kind of jerk storage is needed
#define HAS_CLASSIC_JERK (ENABLED(CLASSIC_JERK) || IS_KINEMATIC)
#if ENABLED(CLASSIC_JERK) || IS_KINEMATIC
#define HAS_CLASSIC_JERK 1
#endif
// E jerk exists with JD disabled (of course) but also when Linear Advance is disabled on Delta/SCARA
#define HAS_CLASSIC_E_JERK (ENABLED(CLASSIC_JERK) || (IS_KINEMATIC && DISABLED(LIN_ADVANCE)))
#if ENABLED(CLASSIC_JERK) || (IS_KINEMATIC && DISABLED(LIN_ADVANCE))
#define HAS_CLASSIC_E_JERK 1
#endif
#ifndef SPI_SPEED
#define SPI_SPEED SPI_FULL_SPEED

56
Marlin/src/inc/Conditionals_adv.h
View File

@ -56,6 +56,50 @@
#undef SHOW_TEMP_ADC_VALUES
#endif
#if EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
#define HAS_DUPLICATION_MODE 1
#endif
#if ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0)
#define HAS_SERVICE_INTERVALS 1
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define HAS_FILAMENT_SENSOR 1
#endif
#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
#define HAS_PRINT_PROGRESS 1
#endif
#if HAS_PRINT_PROGRESS && EITHER(PRINT_PROGRESS_SHOW_DECIMALS, SHOW_REMAINING_TIME)
#define HAS_PRINT_PROGRESS_PERMYRIAD 1
#endif
#if ANY(MARLIN_BRICKOUT, MARLIN_INVADERS, MARLIN_SNAKE, MARLIN_MAZE)
#define HAS_GAMES 1
#if (1 < ENABLED(MARLIN_BRICKOUT) + ENABLED(MARLIN_INVADERS) + ENABLED(MARLIN_SNAKE) + ENABLED(MARLIN_MAZE))
#define HAS_GAME_MENU 1
#endif
#endif
#if ANY(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_MULTI_ENDSTOPS)
#define HAS_EXTRA_ENDSTOPS 1
#endif
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
#define HAS_SOFTWARE_ENDSTOPS 1
#endif
#if ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
#define HAS_RESUME_CONTINUE 1
#endif
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
#define HAS_COLOR_LEDS 1
#endif
#if ALL(HAS_RESUME_CONTINUE, PRINTER_EVENT_LEDS, SDSUPPORT)
#define HAS_LEDS_OFF_FLAG 1
#endif
#if !NUM_SERIAL
#undef BAUD_RATE_GCODE
#endif
@ -65,10 +109,6 @@
#define NUM_Z_STEPPER_DRIVERS 1
#endif
#ifndef PLR_ENABLED_DEFAULT
#define PLR_ENABLED_DEFAULT true
#endif
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
#undef Z_STEPPER_ALIGN_AMP
#endif
@ -171,10 +211,14 @@
#endif
// If platform requires early initialization of watchdog to properly boot
#define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM))
#if ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM)
#define EARLY_WATCHDOG 1
#endif
// Extensible UI pin mapping for RepRapDiscount
#define TOUCH_UI_ULTIPANEL ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
#if ENABLED(TOUCH_UI_FTDI_EVE) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
#define TOUCH_UI_ULTIPANEL 1
#endif
// Poll-based jogging for joystick and other devices
#if ENABLED(JOYSTICK)

305
Marlin/src/inc/Conditionals_post.h
View File

@ -30,6 +30,11 @@
// Extras for CI testing
#endif
// Linear advance uses Jerk since E is an isolated axis
#if DISABLED(CLASSIC_JERK) && ENABLED(LIN_ADVANCE)
#define HAS_LINEAR_E_JERK 1
#endif
#ifdef TEENSYDUINO
#undef max
#define max(a,b) ((a)>(b)?(a):(b))
@ -63,13 +68,8 @@
// Define center values for future use
#define _X_HALF_BED ((X_BED_SIZE) / 2)
#define _Y_HALF_BED ((Y_BED_SIZE) / 2)
#if ENABLED(BED_CENTER_AT_0_0)
#define X_CENTER 0
#define Y_CENTER 0
#else
#define X_CENTER _X_HALF_BED
#define Y_CENTER _Y_HALF_BED
#endif
#define X_CENTER TERN(BED_CENTER_AT_0_0, 0, _X_HALF_BED)
#define Y_CENTER TERN(BED_CENTER_AT_0_0, 0, _Y_HALF_BED)
// Get the linear boundaries of the bed
#define X_MIN_BED (X_CENTER - _X_HALF_BED)
@ -92,10 +92,18 @@
/**
* CoreXY, CoreXZ, and CoreYZ - and their reverse
*/
#define CORE_IS_XY EITHER(COREXY, COREYX)
#define CORE_IS_XZ EITHER(COREXZ, COREZX)
#define CORE_IS_YZ EITHER(COREYZ, COREZY)
#define IS_CORE (CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ)
#if EITHER(COREXY, COREYX)
#define CORE_IS_XY 1
#endif
#if EITHER(COREXZ, COREZX)
#define CORE_IS_XZ 1
#endif
#if EITHER(COREYZ, COREZY)
#define CORE_IS_YZ 1
#endif
#if CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ
#define IS_CORE 1
#endif
#if IS_CORE
#if CORE_IS_XY
#define CORE_AXIS_1 A_AXIS
@ -110,11 +118,7 @@
#define CORE_AXIS_1 B_AXIS
#define CORE_AXIS_2 C_AXIS
#endif
#if ANY(COREYX, COREZX, COREZY)
#define CORESIGN(n) (-(n))
#else
#define CORESIGN(n) (n)
#endif
#define CORESIGN(n) (ANY(COREYX, COREZX, COREZY) ? (-(n)) : (n))
#endif
/**
@ -139,33 +143,23 @@
*/
#ifdef MANUAL_X_HOME_POS
#define X_HOME_POS MANUAL_X_HOME_POS
#elif ENABLED(BED_CENTER_AT_0_0)
#if ENABLED(DELTA)
#define X_HOME_POS 0
#else
#define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
#endif
#else
#if ENABLED(DELTA)
#define X_HOME_POS (X_MIN_POS + (X_BED_SIZE) * 0.5)
#define X_END_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
#if ENABLED(BED_CENTER_AT_0_0)
#define X_HOME_POS TERN(DELTA, 0, X_END_POS)
#else
#define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
#define X_HOME_POS TERN(DELTA, X_MIN_POS + (X_BED_SIZE) * 0.5, X_END_POS)
#endif
#endif
#ifdef MANUAL_Y_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS
#elif ENABLED(BED_CENTER_AT_0_0)
#if ENABLED(DELTA)
#define Y_HOME_POS 0
#else
#define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
#endif
#else
#if ENABLED(DELTA)
#define Y_HOME_POS (Y_MIN_POS + (Y_BED_SIZE) * 0.5)
#define Y_END_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
#if ENABLED(BED_CENTER_AT_0_0)
#define Y_HOME_POS TERN(DELTA, 0, Y_END_POS)
#else
#define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
#define Y_HOME_POS TERN(DELTA, Y_MIN_POS + (Y_BED_SIZE) * 0.5, Y_END_POS)
#endif
#endif
@ -268,7 +262,10 @@
#define _LCD_CONTRAST_INIT 17
#endif
#define HAS_LCD_CONTRAST defined(_LCD_CONTRAST_INIT)
#ifdef _LCD_CONTRAST_INIT
#define HAS_LCD_CONTRAST 1
#endif
#if HAS_LCD_CONTRAST
#ifndef LCD_CONTRAST_MIN
#ifdef _LCD_CONTRAST_MIN
@ -1291,20 +1288,40 @@
// Trinamic Stepper Drivers
#if HAS_TRINAMIC_CONFIG
#define STEALTHCHOP_ENABLED ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
#define USE_SENSORLESS EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
#if ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
#define STEALTHCHOP_ENABLED 1
#endif
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
#define USE_SENSORLESS 1
#endif
// Disable Z axis sensorless homing if a probe is used to home the Z axis
#if HOMING_Z_WITH_PROBE
#undef Z_STALL_SENSITIVITY
#endif
#define X_SENSORLESS (AXIS_HAS_STALLGUARD(X) && defined(X_STALL_SENSITIVITY))
#define X2_SENSORLESS (AXIS_HAS_STALLGUARD(X2) && defined(X2_STALL_SENSITIVITY))
#define Y_SENSORLESS (AXIS_HAS_STALLGUARD(Y) && defined(Y_STALL_SENSITIVITY))
#define Y2_SENSORLESS (AXIS_HAS_STALLGUARD(Y2) && defined(Y2_STALL_SENSITIVITY))
#define Z_SENSORLESS (AXIS_HAS_STALLGUARD(Z) && defined(Z_STALL_SENSITIVITY))
#define Z2_SENSORLESS (AXIS_HAS_STALLGUARD(Z2) && defined(Z2_STALL_SENSITIVITY))
#define Z3_SENSORLESS (AXIS_HAS_STALLGUARD(Z3) && defined(Z3_STALL_SENSITIVITY))
#define Z4_SENSORLESS (AXIS_HAS_STALLGUARD(Z4) && defined(Z4_STALL_SENSITIVITY))
#if defined(X_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(X)
#define X_SENSORLESS 1
#endif
#if defined(X2_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(X2)
#define X2_SENSORLESS 1
#endif
#if defined(Y_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Y)
#define Y_SENSORLESS 1
#endif
#if defined(Y2_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Y2)
#define Y2_SENSORLESS 1
#endif
#if defined(Z_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z)
#define Z_SENSORLESS 1
#endif
#if defined(Z2_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z2)
#define Z2_SENSORLESS 1
#endif
#if defined(Z3_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z3)
#define Z3_SENSORLESS 1
#endif
#if defined(Z4_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z4)
#define Z4_SENSORLESS 1
#endif
#if ENABLED(SPI_ENDSTOPS)
#define X_SPI_SENSORLESS X_SENSORLESS
#define Y_SPI_SENSORLESS Y_SENSORLESS
@ -1388,23 +1405,48 @@
#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
// Shorthand for common combinations
#define HAS_HEATED_BED (HAS_TEMP_BED && HAS_HEATER_BED)
#define BED_OR_CHAMBER (HAS_HEATED_BED || HAS_TEMP_CHAMBER)
#define HAS_TEMP_SENSOR (HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE)
#define HAS_HEATED_CHAMBER (HAS_TEMP_CHAMBER && PIN_EXISTS(HEATER_CHAMBER))
#if HAS_TEMP_BED && HAS_HEATER_BED
#define HAS_HEATED_BED 1
#endif
#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
#define BED_OR_CHAMBER 1
#endif
#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE
#define HAS_TEMP_SENSOR 1
#endif
#if HAS_TEMP_CHAMBER && PIN_EXISTS(HEATER_CHAMBER)
#define HAS_HEATED_CHAMBER 1
#endif
// PID heating
#if !HAS_HEATED_BED
#undef PIDTEMPBED
#endif
#define HAS_PID_HEATING EITHER(PIDTEMP, PIDTEMPBED)
#define HAS_PID_FOR_BOTH BOTH(PIDTEMP, PIDTEMPBED)
#if EITHER(PIDTEMP, PIDTEMPBED)
#define HAS_PID_HEATING 1
#endif
#if BOTH(PIDTEMP, PIDTEMPBED)
#define HAS_PID_FOR_BOTH 1
#endif
// Thermal protection
#define HAS_THERMALLY_PROTECTED_BED (HAS_HEATED_BED && ENABLED(THERMAL_PROTECTION_BED))
#define WATCH_HOTENDS (ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0)
#define WATCH_BED (HAS_THERMALLY_PROTECTED_BED && WATCH_BED_TEMP_PERIOD > 0)
#define WATCH_CHAMBER (HAS_HEATED_CHAMBER && ENABLED(THERMAL_PROTECTION_CHAMBER) && WATCH_CHAMBER_TEMP_PERIOD > 0)
#if HAS_HEATED_BED && ENABLED(THERMAL_PROTECTION_BED)
#define HAS_THERMALLY_PROTECTED_BED 1
#endif
#if ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0
#define WATCH_HOTENDS 1
#endif
#if HAS_THERMALLY_PROTECTED_BED && WATCH_BED_TEMP_PERIOD > 0
#define WATCH_BED 1
#endif
#if HAS_HEATED_CHAMBER && ENABLED(THERMAL_PROTECTION_CHAMBER) && WATCH_CHAMBER_TEMP_PERIOD > 0
#define WATCH_CHAMBER 1
#endif
#if (ENABLED(THERMAL_PROTECTION_HOTENDS) || !EXTRUDERS) \
&& (ENABLED(THERMAL_PROTECTION_BED) || !HAS_HEATED_BED) \
&& (ENABLED(THERMAL_PROTECTION_CHAMBER) || !HAS_HEATED_CHAMBER)
#define THERMALLY_SAFE 1
#endif
// Auto fans
#define HAS_AUTO_FAN_0 (HOTENDS > 0 && PIN_EXISTS(E0_AUTO_FAN))
@ -1455,22 +1497,48 @@
#define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
// User Interface
#define HAS_HOME (PIN_EXISTS(HOME))
#define HAS_KILL (PIN_EXISTS(KILL))
#define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
#define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
#define HAS_BUZZER (PIN_EXISTS(BEEPER) || EITHER(LCD_USE_I2C_BUZZER, PCA9632_BUZZER))
#define USE_BEEPER (HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER, PCA9632_BUZZER))
#define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE))
#if PIN_EXISTS(HOME)
#define HAS_HOME 1
#endif
#if PIN_EXISTS(KILL)
#define HAS_KILL 1
#endif
#if PIN_EXISTS(SUICIDE)
#define HAS_SUICIDE 1
#endif
#if PIN_EXISTS(PHOTOGRAPH)
#define HAS_PHOTOGRAPH 1
#endif
#if PIN_EXISTS(BEEPER) || EITHER(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)
#define HAS_BUZZER 1
#endif
#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)
#define USE_BEEPER 1
#endif
#if PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE)
#define HAS_CASE_LIGHT 1
#endif
// Digital control
#define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
#define HAS_MOTOR_CURRENT_PWM ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
#if PIN_EXISTS(STEPPER_RESET)
#define HAS_STEPPER_RESET 1
#endif
#if PIN_EXISTS(DIGIPOTSS)
#define HAS_DIGIPOTSS 1
#endif
#if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
#define HAS_MOTOR_CURRENT_PWM 1
#endif
#define HAS_SOME_Z_MICROSTEPS (HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_Z4_MICROSTEPS)
#define HAS_SOME_E_MICROSTEPS (HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS || HAS_E6_MICROSTEPS || HAS_E7_MICROSTEPS)
#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_SOME_Z_MICROSTEPS || HAS_SOME_E_MICROSTEPS)
#if HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_Z4_MICROSTEPS
#define HAS_SOME_Z_MICROSTEPS 1
#endif
#if HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS || HAS_E6_MICROSTEPS || HAS_E7_MICROSTEPS
#define HAS_SOME_E_MICROSTEPS 1
#endif
#if HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_SOME_Z_MICROSTEPS || HAS_SOME_E_MICROSTEPS
#define HAS_MICROSTEPS 1
#endif
#if HAS_MICROSTEPS
@ -1764,21 +1832,48 @@
/**
* Set granular options based on the specific type of leveling
*/
#define UBL_SEGMENTED BOTH(AUTO_BED_LEVELING_UBL, DELTA)
#define ABL_PLANAR EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
#define ABL_GRID EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
#define HAS_ABL_NOT_UBL (ABL_PLANAR || ABL_GRID)
#define HAS_ABL_OR_UBL (HAS_ABL_NOT_UBL || ENABLED(AUTO_BED_LEVELING_UBL))
#define HAS_LEVELING (HAS_ABL_OR_UBL || ENABLED(MESH_BED_LEVELING))
#define HAS_AUTOLEVEL (HAS_ABL_OR_UBL && DISABLED(PROBE_MANUALLY))
#define HAS_MESH ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
#define PLANNER_LEVELING (HAS_LEVELING && DISABLED(AUTO_BED_LEVELING_UBL))
#define HAS_PROBING_PROCEDURE (HAS_ABL_OR_UBL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST))
#define HAS_POSITION_MODIFIERS (ENABLED(FWRETRACT) || HAS_LEVELING || ENABLED(SKEW_CORRECTION))
#define NEEDS_THREE_PROBE_POINTS EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
#if ENABLED(AUTO_BED_LEVELING_UBL)
#undef LCD_BED_LEVELING
#if ENABLED(DELTA)
#define UBL_SEGMENTED 1
#endif
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
#define ABL_PLANAR 1
#endif
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
#define ABL_GRID 1
#endif
#if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_3POINT)
#define HAS_ABL_NOT_UBL 1
#endif
#if ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
#define HAS_MESH 1
#endif
#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
#define NEEDS_THREE_PROBE_POINTS 1
#endif
#if EITHER(HAS_ABL_NOT_UBL, AUTO_BED_LEVELING_UBL)
#define HAS_ABL_OR_UBL 1
#if DISABLED(PROBE_MANUALLY)
#define HAS_AUTOLEVEL 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, MESH_BED_LEVELING)
#define HAS_LEVELING 1
#if DISABLED(AUTO_BED_LEVELING_UBL)
#define PLANNER_LEVELING 1
#endif
#endif
#if EITHER(HAS_ABL_OR_UBL, Z_MIN_PROBE_REPEATABILITY_TEST)
#define HAS_PROBING_PROCEDURE 1
#endif
#if ANY(FWRETRACT, HAS_LEVELING, SKEW_CORRECTION)
#define HAS_POSITION_MODIFIERS 1
#endif
#if !HAS_LEVELING
#undef RESTORE_LEVELING_AFTER_G28
#endif
/**
@ -1905,8 +2000,8 @@
#undef MESH_MAX_Y
#endif
#if (defined(PROBE_PT_1_X) && defined(PROBE_PT_2_X) && defined(PROBE_PT_3_X) && defined(PROBE_PT_1_Y) && defined(PROBE_PT_2_Y) && defined(PROBE_PT_3_Y))
#define HAS_FIXED_3POINT
#if defined(PROBE_PT_1_X) && defined(PROBE_PT_2_X) && defined(PROBE_PT_3_X) && defined(PROBE_PT_1_Y) && defined(PROBE_PT_2_Y) && defined(PROBE_PT_3_Y)
#define HAS_FIXED_3POINT 1
#endif
/**
@ -1944,10 +2039,10 @@
* Z_HOMING_HEIGHT / Z_CLEARANCE_BETWEEN_PROBES
*/
#ifndef Z_HOMING_HEIGHT
#ifndef Z_CLEARANCE_BETWEEN_PROBES
#define Z_HOMING_HEIGHT 0
#else
#ifdef Z_CLEARANCE_BETWEEN_PROBES
#define Z_HOMING_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
#else
#define Z_HOMING_HEIGHT 0
#endif
#endif
@ -1975,15 +2070,16 @@
#endif
// Updated G92 behavior shifts the workspace
#define HAS_POSITION_SHIFT DISABLED(NO_WORKSPACE_OFFSETS)
// The home offset also shifts the coordinate space
#define HAS_HOME_OFFSET (DISABLED(NO_WORKSPACE_OFFSETS) && IS_CARTESIAN)
// The SCARA home offset applies only on G28
#define HAS_SCARA_OFFSET (DISABLED(NO_WORKSPACE_OFFSETS) && IS_SCARA)
// Cumulative offset to workspace to save some calculation
#define HAS_WORKSPACE_OFFSET (HAS_POSITION_SHIFT && HAS_HOME_OFFSET)
// M206 sets the home offset for Cartesian machines
#define HAS_M206_COMMAND (HAS_HOME_OFFSET && !IS_SCARA)
#if DISABLED(NO_WORKSPACE_OFFSETS)
#define HAS_POSITION_SHIFT 1
#if IS_CARTESIAN
#define HAS_HOME_OFFSET 1 // The home offset also shifts the coordinate space
#define HAS_WORKSPACE_OFFSET 1 // Cumulative offset to workspace to save some calculation
#define HAS_M206_COMMAND 1 // M206 sets the home offset for Cartesian machines
#elif IS_SCARA
#define HAS_SCARA_OFFSET 1 // The SCARA home offset applies only on G28
#endif
#endif
// LCD timeout to status screen default is 15s
#ifndef LCD_TIMEOUT_TO_STATUS
@ -2006,11 +2102,7 @@
#endif
// Number of VFAT entries used. Each entry has 13 UTF-16 characters
#if ENABLED(SCROLL_LONG_FILENAMES)
#define MAX_VFAT_ENTRIES (5)
#else
#define MAX_VFAT_ENTRIES (2)
#endif
#define MAX_VFAT_ENTRIES TERN(SCROLL_LONG_FILENAMES, 5, 2)
// Nozzle park for Delta
#if BOTH(NOZZLE_PARK_FEATURE, DELTA)
@ -2022,9 +2114,8 @@
// on boards where SD card and LCD display share the same SPI bus
// because of a bug in the shared SPI implementation. (See #8122)
#if defined(TARGET_LPC1768) && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && (SCK_PIN == LCD_PINS_D4)
#define SDCARD_SORT_ALPHA // Keeps one directory level in RAM. Changing
// directory levels still glitches the screen,
// but the following LCD update cleans it up.
#define SDCARD_SORT_ALPHA // Keep one directory level in RAM. Changing directory levels
// may still glitch the screen, but LCD updates clean it up.
#undef SDSORT_LIMIT
#undef SDSORT_USES_RAM
#undef SDSORT_USES_STACK
@ -2057,19 +2148,15 @@
#ifndef LCD_WIDTH
#if HAS_GRAPHICAL_LCD
#define LCD_WIDTH 21
#elif ENABLED(ULTIPANEL)
#define LCD_WIDTH 20
#else
#define LCD_WIDTH 16
#define LCD_WIDTH TERN(ULTIPANEL, 20, 16)
#endif
#endif
#ifndef LCD_HEIGHT
#if HAS_GRAPHICAL_LCD
#define LCD_HEIGHT 5
#elif ENABLED(ULTIPANEL)
#define LCD_HEIGHT 4
#else
#define LCD_HEIGHT 2
#define LCD_HEIGHT TERN(ULTIPANEL, 4, 2)
#endif
#endif
#endif

33
Marlin/src/inc/SanityCheck.h
View File

@ -34,6 +34,37 @@
#error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
#endif
// Make sure macros aren't borked
#define TEST1
#define TEST2 1
#define TEST3 0
#define TEST4 true
#if ENABLED(TEST0)
#error "ENABLED is borked!"
#endif
#if DISABLED(TEST1)
#error "DISABLED is borked!"
#endif
#if !ENABLED(TEST2)
#error "ENABLED is borked!"
#endif
#if ENABLED(TEST3)
#error "ENABLED is borked!"
#endif
#if DISABLED(TEST4)
#error "DISABLED is borked!"
#endif
#if !ANY(TEST1, TEST2, TEST3, TEST4) || ANY(TEST0, TEST3)
#error "ANY is borked!"
#endif
#if DISABLED(TEST0, TEST1, TEST2, TEST4)
#error "DISABLED is borked!"
#endif
#undef TEST1
#undef TEST2
#undef TEST3
#undef TEST4
/**
* We try our best to include sanity checks for all changed configuration
* directives because users have a tendency to use outdated config files with
@ -1237,7 +1268,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Require some kind of probe for bed leveling and probe testing
*/
#if HAS_ABL_NOT_UBL && !PROBE_SELECTED
#error "Auto Bed Leveling requires one of these: PROBE_MANUALLY, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or a Z Servo."
#error "Auto Bed Leveling requires one of these: PROBE_MANUALLY, SENSORLESS_PROBING, BLTOUCH, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or a Z Servo."
#endif
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)

16
Marlin/src/lcd/ultralcd.h
View File

@ -27,10 +27,18 @@
#include "../libs/buzzer.h"
#endif
#define HAS_ENCODER_ACTION (HAS_LCD_MENU || ENABLED(ULTIPANEL_FEEDMULTIPLY))
#define HAS_ENCODER_WHEEL ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2))
#define HAS_DIGITAL_BUTTONS (HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT))
#define HAS_SHIFT_ENCODER (!HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL))))
#if HAS_LCD_MENU || ENABLED(ULTIPANEL_FEEDMULTIPLY)
#define HAS_ENCODER_ACTION 1
#endif
#if (!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2)
#define HAS_ENCODER_WHEEL 1
#endif
#if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT)
#define HAS_DIGITAL_BUTTONS 1
#endif
#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL)))
#define HAS_SHIFT_ENCODER 1
#endif
// I2C buttons must be read in the main thread
#define HAS_SLOW_BUTTONS EITHER(LCD_I2C_VIKI, LCD_I2C_PANELOLU2)

192
Marlin/src/module/configuration_store.cpp
View File

@ -181,11 +181,8 @@ typedef struct SettingsDataStruct {
//
float mbl_z_offset; // mbl.z_offset
uint8_t mesh_num_x, mesh_num_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y
#if ENABLED(MESH_BED_LEVELING)
float mbl_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; // mbl.z_values
#else
float mbl_z_values[3][3];
#endif
float mbl_z_values[TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_X, 3)] // mbl.z_values
[TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_Y, 3)];
//
// HAS_BED_PROBE
@ -533,11 +530,10 @@ void MarlinSettings::postprocess() {
EEPROM_START();
eeprom_error = false;
#if ENABLED(FLASH_EEPROM_EMULATION)
EEPROM_SKIP(ver); // Flash doesn't allow rewriting without erase
#else
EEPROM_WRITE(ver); // invalidate data first
#endif
// Write or Skip version. (Flash doesn't allow rewrite without erase.)
TERN(FLASH_EEPROM_EMULATION, EEPROM_SKIP, EEPROM_WRITE)(ver);
EEPROM_SKIP(working_crc); // Skip the checksum slot
working_crc = 0; // clear before first "real data"
@ -564,12 +560,10 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(planner_max_jerk);
#endif
#if DISABLED(CLASSIC_JERK)
EEPROM_WRITE(planner.junction_deviation_mm);
#else
#if ENABLED(CLASSIC_JERK)
dummyf = 0.02f;
EEPROM_WRITE(dummyf);
#endif
EEPROM_WRITE(TERN(CLASSIC_JERK, dummyf, planner.junction_deviation_mm));
}
//
@ -617,13 +611,7 @@ void MarlinSettings::postprocess() {
// Global Leveling
//
{
const float zfh = (
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
planner.z_fade_height
#else
10.0
#endif
);
const float zfh = TERN(ENABLE_LEVELING_FADE_HEIGHT, planner.z_fade_height, 10.0f);
EEPROM_WRITE(zfh);
}
@ -632,22 +620,24 @@ void MarlinSettings::postprocess() {
//
{
#if ENABLED(MESH_BED_LEVELING)
// Compile time test that sizeof(mbl.z_values) is as expected
static_assert(
sizeof(mbl.z_values) == (GRID_MAX_POINTS) * sizeof(mbl.z_values[0][0]),
"MBL Z array is the wrong size."
);
const uint8_t mesh_num_x = GRID_MAX_POINTS_X, mesh_num_y = GRID_MAX_POINTS_Y;
EEPROM_WRITE(mbl.z_offset);
EEPROM_WRITE(mesh_num_x);
EEPROM_WRITE(mesh_num_y);
EEPROM_WRITE(mbl.z_values);
#else // For disabled MBL write a default mesh
#else
dummyf = 0;
const uint8_t mesh_num_x = 3, mesh_num_y = 3;
EEPROM_WRITE(dummyf); // z_offset
EEPROM_WRITE(mesh_num_x);
EEPROM_WRITE(mesh_num_y);
#endif
const uint8_t mesh_num_x = TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_X, 3),
mesh_num_y = TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_Y, 3);
EEPROM_WRITE(TERN(MESH_BED_LEVELING, mbl.z_offset, dummyf));
EEPROM_WRITE(mesh_num_x);
EEPROM_WRITE(mesh_num_y);
#if ENABLED(MESH_BED_LEVELING)
EEPROM_WRITE(mbl.z_values);
#else
for (uint8_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_WRITE(dummyf);
#endif
}
@ -682,26 +672,25 @@ void MarlinSettings::postprocess() {
//
{
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Compile time test that sizeof(z_values) is as expected
static_assert(
sizeof(z_values) == (GRID_MAX_POINTS) * sizeof(z_values[0][0]),
"Bilinear Z array is the wrong size."
);
const uint8_t grid_max_x = GRID_MAX_POINTS_X, grid_max_y = GRID_MAX_POINTS_Y;
EEPROM_WRITE(grid_max_x); // 1 byte
EEPROM_WRITE(grid_max_y); // 1 byte
EEPROM_WRITE(bilinear_grid_spacing); // 2 ints
EEPROM_WRITE(bilinear_start); // 2 ints
EEPROM_WRITE(z_values); // 9-256 floats
#else
// For disabled Bilinear Grid write an empty 3x3 grid
const uint8_t grid_max_x = 3, grid_max_y = 3;
const xy_pos_t bilinear_start{0}, bilinear_grid_spacing{0};
#endif
const uint8_t grid_max_x = TERN(AUTO_BED_LEVELING_BILINEAR, GRID_MAX_POINTS_X, 3),
grid_max_y = TERN(AUTO_BED_LEVELING_BILINEAR, GRID_MAX_POINTS_Y, 3);
EEPROM_WRITE(grid_max_x);
EEPROM_WRITE(grid_max_y);
EEPROM_WRITE(bilinear_grid_spacing);
EEPROM_WRITE(bilinear_start);
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
EEPROM_WRITE(z_values); // 9-256 floats
#else
dummyf = 0;
EEPROM_WRITE(grid_max_x);
EEPROM_WRITE(grid_max_y);
EEPROM_WRITE(bilinear_grid_spacing);
EEPROM_WRITE(bilinear_start);
for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_WRITE(dummyf);
#endif
}
@ -711,16 +700,10 @@ void MarlinSettings::postprocess() {
//
{
_FIELD_TEST(planner_leveling_active);
#if ENABLED(AUTO_BED_LEVELING_UBL)
EEPROM_WRITE(planner.leveling_active);
EEPROM_WRITE(ubl.storage_slot);
#else
const bool ubl_active = false;
const int8_t storage_slot = -1;
EEPROM_WRITE(ubl_active);
EEPROM_WRITE(storage_slot);
#endif // AUTO_BED_LEVELING_UBL
const bool ubl_active = TERN(AUTO_BED_LEVELING_UBL, planner.leveling_active, false);
const int8_t storage_slot = TERN(AUTO_BED_LEVELING_UBL, ubl.storage_slot, -1);
EEPROM_WRITE(ubl_active);
EEPROM_WRITE(storage_slot);
}
//
@ -728,7 +711,6 @@ void MarlinSettings::postprocess() {
//
{
_FIELD_TEST(servo_angles);
#if !HAS_SERVO_ANGLES
uint16_t servo_angles[EEPROM_NUM_SERVOS][2] = { { 0, 0 } };
#endif
@ -753,11 +735,7 @@ void MarlinSettings::postprocess() {
//
{
_FIELD_TEST(bltouch_last_written_mode);
#if ENABLED(BLTOUCH)
const bool &bltouch_last_written_mode = bltouch.last_written_mode;
#else
constexpr bool bltouch_last_written_mode = false;
#endif
const bool bltouch_last_written_mode = TERN(BLTOUCH, bltouch.last_written_mode, false);
EEPROM_WRITE(bltouch_last_written_mode);
}
@ -782,23 +760,9 @@ void MarlinSettings::postprocess() {
// Write dual endstops in X, Y, Z order. Unused = 0.0
dummyf = 0;
#if ENABLED(X_DUAL_ENDSTOPS)
EEPROM_WRITE(endstops.x2_endstop_adj); // 1 float
#else
EEPROM_WRITE(dummyf);
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
EEPROM_WRITE(endstops.y2_endstop_adj); // 1 float
#else
EEPROM_WRITE(dummyf);
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
EEPROM_WRITE(endstops.z2_endstop_adj); // 1 float
#else
EEPROM_WRITE(dummyf);
#endif
EEPROM_WRITE(TERN(X_DUAL_ENDSTOPS, endstops.x2_endstop_adj, dummyf)); // 1 float
EEPROM_WRITE(TERN(Y_DUAL_ENDSTOPS, endstops.y2_endstop_adj, dummyf)); // 1 float
EEPROM_WRITE(TERN(Z_MULTI_ENDSTOPS, endstops.z2_endstop_adj, dummyf)); // 1 float
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3
EEPROM_WRITE(endstops.z3_endstop_adj); // 1 float
@ -865,12 +829,10 @@ void MarlinSettings::postprocess() {
}
_FIELD_TEST(lpq_len);
#if ENABLED(PID_EXTRUSION_SCALING)
EEPROM_WRITE(thermalManager.lpq_len);
#else
#if DISABLED(PID_EXTRUSION_SCALING)
const int16_t lpq_len = 20;
EEPROM_WRITE(lpq_len);
#endif
EEPROM_WRITE(TERN(PID_EXTRUSION_SCALING, thermalManager.lpq_len, lpq_len));
}
//
@ -911,8 +873,6 @@ void MarlinSettings::postprocess() {
const int16_t lcd_contrast =
#if HAS_LCD_CONTRAST
ui.contrast
#elif defined(DEFAULT_LCD_CONTRAST)
DEFAULT_LCD_CONTRAST
#else
127
#endif
@ -925,14 +885,7 @@ void MarlinSettings::postprocess() {
//
{
_FIELD_TEST(recovery_enabled);
const bool recovery_enabled =
#if ENABLED(POWER_LOSS_RECOVERY)
recovery.enabled
#else
PLR_ENABLED_DEFAULT
#endif
;
const bool recovery_enabled = TERN(POWER_LOSS_RECOVERY, recovery.enabled, ENABLED(PLR_ENABLED_DEFAULT));
EEPROM_WRITE(recovery_enabled);
}
@ -941,19 +894,15 @@ void MarlinSettings::postprocess() {
//
{
_FIELD_TEST(fwretract_settings);
#if ENABLED(FWRETRACT)
EEPROM_WRITE(fwretract.settings);
#else
#if DISABLED(FWRETRACT)
const fwretract_settings_t autoretract_defaults = { 3, 45, 0, 0, 0, 13, 0, 8 };
EEPROM_WRITE(autoretract_defaults);
#endif
#if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
EEPROM_WRITE(fwretract.autoretract_enabled);
#else
EEPROM_WRITE(TERN(FWRETRACT, fwretract.settings, autoretract_defaults));
#if DISABLED(FWRETRACT_AUTORETRACT)
const bool autoretract_enabled = false;
EEPROM_WRITE(autoretract_enabled);
#endif
EEPROM_WRITE(TERN(FWRETRACT_AUTORETRACT, fwretract.autoretract_enabled, autoretract_enabled));
}
//
@ -1270,12 +1219,10 @@ void MarlinSettings::postprocess() {
_FIELD_TEST(coordinate_system);
#if ENABLED(CNC_COORDINATE_SYSTEMS)
EEPROM_WRITE(gcode.coordinate_system);
#else
#if DISABLED(CNC_COORDINATE_SYSTEMS)
const xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS] = { { 0 } };
EEPROM_WRITE(coordinate_system);
#endif
EEPROM_WRITE(TERN(CNC_COORDINATE_SYSTEMS, gcode.coordinate_system, coordinate_system));
//
// Skew correction factors
@ -1448,11 +1395,7 @@ void MarlinSettings::postprocess() {
for (uint8_t q = 4; q--;) EEPROM_READ(dummyf);
#endif
#if DISABLED(CLASSIC_JERK)
EEPROM_READ(planner.junction_deviation_mm);
#else
EEPROM_READ(dummyf);
#endif
EEPROM_READ(TERN(CLASSIC_JERK, dummyf, planner.junction_deviation_mm));
}
//
@ -1504,13 +1447,7 @@ void MarlinSettings::postprocess() {
//
// Global Leveling
//
{
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
EEPROM_READ(new_z_fade_height);
#else
EEPROM_READ(dummyf);
#endif
}
EEPROM_READ(TERN(ENABLE_LEVELING_FADE_HEIGHT, new_z_fade_height, dummyf));
//
// Mesh (Manual) Bed Leveling
@ -1662,21 +1599,10 @@ void MarlinSettings::postprocess() {
_FIELD_TEST(x2_endstop_adj);
#if ENABLED(X_DUAL_ENDSTOPS)
EEPROM_READ(endstops.x2_endstop_adj); // 1 float
#else
EEPROM_READ(dummyf);
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
EEPROM_READ(endstops.y2_endstop_adj); // 1 float
#else
EEPROM_READ(dummyf);
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
EEPROM_READ(endstops.z2_endstop_adj); // 1 float
#else
EEPROM_READ(dummyf);
#endif
EEPROM_READ(TERN(X_DUAL_ENDSTOPS, endstops.x2_endstop_adj, dummyf)); // 1 float
EEPROM_READ(TERN(Y_DUAL_ENDSTOPS, endstops.y2_endstop_adj, dummyf)); // 1 float
EEPROM_READ(TERN(Z_MULTI_ENDSTOPS, endstops.z2_endstop_adj, dummyf)); // 1 float
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3
EEPROM_READ(endstops.z3_endstop_adj); // 1 float
#else
@ -2667,7 +2593,7 @@ void MarlinSettings::reset() {
//
#if ENABLED(POWER_LOSS_RECOVERY)
recovery.enable(PLR_ENABLED_DEFAULT);
recovery.enable(ENABLED(PLR_ENABLED_DEFAULT));
#endif
//

24
Marlin/src/module/motion.cpp
View File

@ -1208,15 +1208,9 @@ feedRate_t get_homing_bump_feedrate(const AxisEnum axis) {
#if ENABLED(SPI_ENDSTOPS)
switch (axis) {
#if X_SPI_SENSORLESS
case X_AXIS: endstops.tmc_spi_homing.x = true; break;
#endif
#if Y_SPI_SENSORLESS
case Y_AXIS: endstops.tmc_spi_homing.y = true; break;
#endif
#if Z_SPI_SENSORLESS
case Z_AXIS: endstops.tmc_spi_homing.z = true; break;
#endif
case X_AXIS: if (ENABLED(X_SPI_SENSORLESS)) endstops.tmc_spi_homing.x = true; break;
case Y_AXIS: if (ENABLED(Y_SPI_SENSORLESS)) endstops.tmc_spi_homing.y = true; break;
case Z_AXIS: if (ENABLED(Z_SPI_SENSORLESS)) endstops.tmc_spi_homing.z = true; break;
default: break;
}
#endif
@ -1280,15 +1274,9 @@ feedRate_t get_homing_bump_feedrate(const AxisEnum axis) {
#if ENABLED(SPI_ENDSTOPS)
switch (axis) {
#if X_SPI_SENSORLESS
case X_AXIS: endstops.tmc_spi_homing.x = false; break;
#endif
#if Y_SPI_SENSORLESS
case Y_AXIS: endstops.tmc_spi_homing.y = false; break;
#endif
#if Z_SPI_SENSORLESS
case Z_AXIS: endstops.tmc_spi_homing.z = false; break;
#endif
case X_AXIS: if (ENABLED(X_SPI_SENSORLESS)) endstops.tmc_spi_homing.x = false; break;
case Y_AXIS: if (ENABLED(Y_SPI_SENSORLESS)) endstops.tmc_spi_homing.y = false; break;
case Z_AXIS: if (ENABLED(Z_SPI_SENSORLESS)) endstops.tmc_spi_homing.z = false; break;
default: break;
}
#endif

10
Marlin/src/module/motion.h
View File

@ -375,11 +375,13 @@ void homeaxis(const AxisEnum axis);
FORCE_INLINE int x_home_dir(const uint8_t extruder) { return extruder ? X2_HOME_DIR : X_HOME_DIR; }
#elif ENABLED(MULTI_NOZZLE_DUPLICATION)
#else
enum DualXMode : char {
DXC_DUPLICATION_MODE = 2
};
#if ENABLED(MULTI_NOZZLE_DUPLICATION)
enum DualXMode : char { DXC_DUPLICATION_MODE = 2 };
#endif
FORCE_INLINE int x_home_dir(const uint8_t) { return home_dir(X_AXIS); }
#endif

2
Marlin/src/module/probe.h
View File

@ -177,7 +177,7 @@ public:
// Retrieve three points to probe the bed. Any type exposing set(X,Y) may be used.
template <typename T>
static inline void get_three_points(T points[3]) {
#if ENABLED(HAS_FIXED_3POINT)
#if HAS_FIXED_3POINT
points[0].set(PROBE_PT_1_X, PROBE_PT_1_Y);
points[1].set(PROBE_PT_2_X, PROBE_PT_2_Y);
points[2].set(PROBE_PT_3_X, PROBE_PT_3_Y);

6
Marlin/src/sd/cardreader.h
View File

@ -276,11 +276,7 @@ private:
#if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#define IS_SD_INSERTED() Sd2Card::isInserted()
#elif PIN_EXISTS(SD_DETECT)
#if ENABLED(SD_DETECT_INVERTED)
#define IS_SD_INSERTED() READ(SD_DETECT_PIN)
#else
#define IS_SD_INSERTED() !READ(SD_DETECT_PIN)
#endif
#define IS_SD_INSERTED() (READ(SD_DETECT_PIN) != ENABLED(SD_DETECT_INVERTED))
#else
// No card detect line? Assume the card is inserted.
#define IS_SD_INSERTED() true

Write Preview
Loading…
Cancel
Save