Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Joseivaldo Benito Junior	8e48e24c7f	Update Delta example files Signed-off-by: Joseivaldo Benito Junior <jrbenito@benito.qsl.br>	11 years ago
Nicolas Rossi	b0c8120fcc	Added feedrate setting in exemple config for manual moves from panel	11 years ago
Jim Morris	52f79ffeca	add an example default configuration for delta style bots	11 years ago
Robert F-C	c3568398b5	Disable DUAL_X_CARRIAGE by default	11 years ago
Robert F-C	39cd3dbdbe	Remove dual x-carriage functionality that could/should be implemented in slicer Also added a couple of missed merge lines in homeaxis() from previous commit.	11 years ago
Jim Morris	d01ee7e7b5	fix zjerk being the same for delta as xy jerk add more delta defaults on delta make second home even slower	12 years ago
Robert F-C	d7390e13d9	Support dual x-carriage printers Dual x-carriage designs offer some substantial improvements for dual extruder printing.	12 years ago
Jim Morris	460751503e	Added default configurations for deltas when DELTA is defined	12 years ago
Erik van der Zalm	c4a2077951	M109 and M190 now wait when cooling down if R is used instead of S. M109 S180 waits only when heating. M109 R180 also waits when cooling.	12 years ago
Scott Lahteine	5dabc95409	Apply all changes from latest Marlin_V1 Diffed and merged, preserving my updates	12 years ago
Erik van der Zalm	5090c56651	More redundant temp sensor changes. (After testing and debugging by reifsnderb)	12 years ago
Erik van der Zalm	9be61cdc02	Added redundant temp sensor	12 years ago
Robert F-C	d5ad7a0814	Rework change to incorporate CONTROLLERFAN Also refactor extruder auto fan logic to simplify further and now only check every 2.5 seconds	12 years ago
Robert F-C	1daf2f3256	Number of extruders is not an advanced configuration - it is a basic property.	12 years ago
Robert F-C	f1263d3f88	Further reduce code by using precompiler logic	12 years ago
Robert F-C	372e12f83f	Implement automatic extruder/cold-end fan control based on temperature This change allows fan outputs to automatically turn on/off when the associated nozzle temperature of an extruder is above/below a threshold temperature. Multiple extruders can be assigned to the same pin in which case the fan will turn on when any selected extruder is above the threshold. It also makes the M42 command compatible with the M106/M107 command. The majority of the logic in this change will be evaluated by the compiler at build time (i.e, low code space requirements).	12 years ago
Bernhard	1d06b10962	Added a feature to have filament change by gcode or display trigger. [default off for now] syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament. Oh, and it will display "remove filament" and beep like crazy. You are then supposed to insert a new filament (other color, e.g.) and click the display to continue. After having the nozzle cleaned manually, aided by the disabled e-steppers. After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.	12 years ago
daid303	0f3f5d083d	Minor cleanup of the new FAN_KICKSTART code. #334	12 years ago
Kevin O'Connor	3d91bd486c	Add "kick fan" feature - briefly run fan at full speed on start. Add a feature to run the cooling fan at full speed for a small period (default 100ms) when first starting the fan. Some fans wont reliably start spinning at low power, and many fans have issue with the PWM at low power. However, once the fan starts spinning it can reliably be set to a wide range of PWM values.	12 years ago
daid303	921273baa0	Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.	12 years ago
Nicolas Rossi	f3c1fc70a9	Power signal control definitions for ATX and others	12 years ago
Erik vd Zalm	0ac452e252	Disable is now multi extruder compatible. M84 got a T option.	12 years ago
Johann Rocholl	1f45cb0a51	Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.	12 years ago
Johann Rocholl	931a0052ea	Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason.	12 years ago
Johann Rocholl	cec7283b21	Enable QUICK_HOME for deltabot.	12 years ago
Johann Rocholl	c430906d3b	Deltabot settings and configuration adjustments.	12 years ago
daid303	587154c01b	Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.	12 years ago
daid303	f6ff0ab767	signed/unsigned fixes.	12 years ago
daid303	b6ff45254e	Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.	12 years ago
daid303	7e348fcb5f	By mistake enabled the watchdog by default. This should be off by default.	12 years ago
daid303	06b58a9c4f	First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.	12 years ago
Mark Finn	04631d2250	cleanup for pull	12 years ago
ZetaPhoenix	c6caa45ae2	Limit Switch locations based on MIN/MAX limits and homing direction fixes #246 Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined. Relocated code based on feedback.	12 years ago
tonokip	1c1fddc7ac	Added support for the Rambo reprap electronics board. Added Mcodes to set motor current and microstepping pins.	12 years ago
Enchiridion	50cde90324	Added support for dual Z axis stepper drivers	12 years ago
daid	12de8fff81	Support step motor controllers with active low step pins.	13 years ago
Bernhard	0c123950e9	__ header file replace	13 years ago
Bernhard	bf077125b9	added firmware retract. disabled by default	13 years ago
Erik van der Zalm	67cf105bc6	Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.	13 years ago
Erik van der Zalm	4ca2f336f0	Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp	13 years ago
Bernhard	1532200435	found error in filenames. One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely	13 years ago
Erik van der Zalm	87ff2f8867	Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)	13 years ago
Erik van der Zalm	c6f2ec3c82	remove stop_heating_wait	13 years ago
Erik van der Zalm	018c567abf	Moved SLOWDOWN function. (jetty840) Included AD595 calibration options. (daid)	13 years ago
Blair Thompson	d9f2f509d5	Added new menu items under the prepare submenu. Instead of a single pre-heat, now there is pre-heat ABS and PLA options Added defines to the configuration file to adjust preheat temperatures for both	13 years ago
Erik van der Zalm	8816ef1c64	Small fixes after merge	13 years ago
Erik van der Zalm	b447815de5	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	13 years ago
Erik van der Zalm	13e185d330	removed unused HEATING_EARLY_FINISH_DEG_OFFSET Simplified stepper inactive time	13 years ago
Erik van der Zalm	5113513cb2	RC 1	13 years ago
Erik van der Zalm	d8a0c6450f	Split the configuration file in two parts. One for common settings. One for advanced settings.	13 years ago

3 Commits (05932e445883c4fdf5620f90d503a3745639ffbc)