Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
daid	2a77c84c8f	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	13 years ago
Erik van der Zalm	9173a5713b	Teensylu support.	13 years ago
Erik van der Zalm	292ddd2edb	Fix Z_LATE_ENABLE	13 years ago
Erik van der Zalm	abb7e63906	fixed z-disable bug.	13 years ago
Erik van der Zalm	e45e5c68bb	Added support for Gen3+ (Pins file only) Added late z enable. (blddk request) Only calculate look ahead if >2 moves in buffer. Removed some FORCE_INLINE to save memory. Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>	13 years ago
Bernhard	57f9359a41	simplified the includes, makefile now works with arduino23	13 years ago
Bernhard	3c1a4aac2b	header file simplification	13 years ago
Bernhard	f312216e97	Revert "untestest commit, so I don't loose code.. features runout prevention addons" This reverts commit `651cde8b98`.	13 years ago
Bernhard	651cde8b98	untestest commit, so I don't loose code.. features runout prevention addons	13 years ago
Erik van der Zalm	e017228569	Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF	13 years ago
Bernhard	82c99625fa	instant stop of sd prints from the panel.	13 years ago
Bernhard	b1d84d879b	st_synchronize back to normal..	13 years ago
Bernhard	61c943b4bf	fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.	13 years ago
Bernhard	754d2d69b2	z homing sound fix, for now until the actual cause is found..	13 years ago
Denis B	4fd75dc813	Working version of multiple extruders (up to 3) - The temperature control is pretty much complete (not sure what to do w/ autotemp though) Changed the pins assignment to clearly separate bed and extruder heaters and temp sensors, changed a bit how termistor tables are handled. - The steppers control is rudimentary (only chanages what pins it uses depending on the active_extruder var, but that's enough for switching extruder in the start.gcode in the the profiles) - Tested only w/ RAMPS 1.4	13 years ago
Erik van der Zalm	89e832c295	Update endstops only for homing. (use less resources when not used)	13 years ago
Erik van der Zalm	b99c49ec3b	Add option to only check endstop when homing	13 years ago
Erik van der Zalm	af22e9cd38	Some advance modifications	13 years ago
Bernhard	7714b98da7	solved some compiler warnings that are now visible in arduino 1.0. Found a couple of unused variables, that I commented. Tried to solve the program memory warning message, and failed.	13 years ago
Erik van der Zalm	6b86f15686	More 2nd extruder implementation. (Not usable) Advance (not tested)	13 years ago
Erik van der Zalm	f75f426dfa	Removed interrupt nesting in the stepper ISR. Add serial checkRx in stepper ISR. Copied HardwareSerial to MarlinSerial (Needed for checkRx).	13 years ago
Bernhard	b128d25f27	overlooked some inlines..	13 years ago
Bernhard	4d6a5c29df	disable steppers as routine in stepper.cpp	13 years ago
Bernhard	a6823a84e1	another typo	13 years ago
Erik van der Zalm	27654bfe69	Fixed variable (removed 0x)	13 years ago
Erik van der Zalm	ac8adabb2b	Small nominal speed improvement.	13 years ago
Erik van der Zalm	0e0e4945d8	Removed ISR overtaken message from ISR routine	13 years ago
Erik van der Zalm	c0f8c9fd72	Seperate ENDSTOP_INVERTING for X Y and Z Added simple endstop filter. Corrected M114 count display.	13 years ago
Erik van der Zalm	4e5becfc51	Added endstop reporting	13 years ago
Erik van der Zalm	e7dca8614b	Advance experiments. Not working yet.	13 years ago
Bernhard Kubicek	a9c7da06e3	and changed ultipanel to have the mm/sec and not mm/min Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Conflicts: Marlin/Marlin.pde Marlin/ultralcd.h	13 years ago
Erik van der Zalm	805d37f77b	Fixed some small planner bugs	13 years ago
Erik van der Zalm	5fd41ae872	Some fixes in planner	13 years ago
Erik van der Zalm	65934eee9c	A lot of changes in the planner code	13 years ago
Bernhard Kubicek	9980ceb4a3	added a m400, that finished all moves, and the mechanism so that if an endstop is hit it the ISR, the steps_to_be_taken are stored, and some current_block data that will be deleted in the next move If the normal loop() then finds such an event, the position is calculated (floats would have taken too long in the ISR) A serial message is generated.	13 years ago
Bernhard Kubicek	ab154d5592	project progmem finished: total change with ultipanel: 2456 byte free ram initial. now: 4374 ram.	13 years ago
Bernhard Kubicek	72ace55e6a	better visibility of public/private/imported variables	13 years ago
Bernhard Kubicek	907daa49af	made loop counters uint8_t most were int(16_t) before	13 years ago
Bernhard Kubicek	1d171e9e52	reformating and some minor bugs/things found on the way.	13 years ago
Bernhard Kubicek	900e0c9bf2	overworked the serial responses. Quite difficult, since many texts are Pronterface protocol.	13 years ago
Bernhard Kubicek	b9ea0651ec	Revert "this is not working. Do you maybe know why?" This reverts commit `8bcdb9f5f0`.	13 years ago
Bernhard Kubicek	8bcdb9f5f0	this is not working. Do you maybe know why?	13 years ago
Bernhard Kubicek	40e8081623	changed end of line to windows, which seems to be the majority of developers main platform.	13 years ago
Bernhard Kubicek	00674af3a8	merge from the branch bkubicek/Marlin/zalmmerge	13 years ago
Erik van der Zalm	094afe7c10	Merged Marlin, Marlin non gen6 and Ultimaker changes	13 years ago

46 Commits (01d28c18ab43b806c095068b63f52b879103de1c)