Clean up Transfer Buffer Size comment

Marlin/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -565,10 +565,13 @@ const unsigned int dropsegments = 2; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/K8400/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 26
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 8
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -567,10 +567,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@@ -561,10 +561,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -561,10 +561,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -560,10 +560,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -565,10 +565,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -561,10 +561,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -559,10 +559,13 @@ const unsigned int dropsegments = 5; //everything with less than this number of
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Set Transfer-Buffer-Size by uncommenting the next define. Default size is 32byte.
-// :[0,2,4,8,16,32,64,128,256]. To save 386byte of PROGMEM and (3 + TX_BUFFER_SIZE) bytes of RAM set TX_BUFFER_SIZE to 0
-// To buffer a simple "ok" you need 4 byte, for ADVANCED_OK/M105 you need 32 and for debug-echo: 128 byte to get the optimal speed.
-// Any other output does not need to be that speedy.
+// Transfer Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0,2,4,8,16,32,64,128,256]
 #define TX_BUFFER_SIZE 0
 
 // Enable an emergency-command parser to intercept certain commands as they