Browse Source

[2.0.x] MKS SBASE - Separate SD_DETECT for LCD and on-board SD cards (#10557)

pull/1/head
Bob-the-Kuhn 7 years ago
committed by Scott Lahteine
parent
commit
f973ff49ae
  1. 11
      Marlin/src/config/examples/Mks/Sbase/000-README_RepRap_Discount_Full_Graphic_Smart_Controller.txt
  2. 15
      Marlin/src/pins/pins_MKS_SBASE.h

11
Marlin/src/config/examples/Mks/Sbase/000-README_RepRap_Discount_Full_Graphic_Smart_Controller.txt

@ -25,3 +25,14 @@ An octopus cable something like the Adafruit 1199 will simply the construction o
Adafruit 10-pin IDC Socket Rainbow Breakout Cable [1199]
https://www.adafruit.com/product/1199
/////////////////////////////////////////////////////////////////////
27 APR 2018
If you also want a functional SD_DETECT_PIN then you'll need to also move the following pin:
used to go to P0.27 to J8-5
if you decide to use a different pin then the pins_MKS_SBASE.h file will need to be modified.

15
Marlin/src/pins/pins_MKS_SBASE.h

@ -158,7 +158,6 @@
#define BTN_ENC P1_30 // EXP1.2
#define BTN_EN1 P3_26 // EXP2.5
#define BTN_EN2 P3_25 // EXP2.3
#define SD_DETECT_PIN P0_27 // EXP2.7
#define LCD_PINS_RS P0_16 // EXP1.4
#define LCD_SDSS P0_28 // EXP2.4
#define LCD_PINS_ENABLE P0_18 // EXP1.3
@ -194,9 +193,21 @@
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.5)
#define SS_PIN P0_28
#define SD_DETECT_PIN P0_27
#define SDSS P0_06
/**
* P0.27 is on EXP2 and the on-board SD card's socket. That means it can't be
* used as the SD_DETECT for the LCD's SD card.
*
* The best solution is to use the custom cable to connect the LCD's SD_DETECT
* to a pin NOT on EXP2.
*
* If you can't find a pin to use for the LCD's SD_DETECT then comment out
* SD_DETECT_PIN entirely and remove that wire from the the custom cable.
*/
#define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27)
/**
* PWMs
*

Loading…
Cancel
Save