Browse Source

🌐 Update German language (#24555)

FB4S_WIFI
Ludy 2 years ago
committed by Scott Lahteine
parent
commit
ec9a2ee557
  1. 107
      Marlin/src/lcd/language/language_de.h

107
Marlin/src/lcd/language/language_de.h

@ -37,7 +37,10 @@ namespace Language_de {
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" bereit");
LSTR MSG_YES = _UxGT("JA");
LSTR MSG_NO = _UxGT("NEIN");
LSTR MSG_HIGH = _UxGT("HOCH");
LSTR MSG_LOW = _UxGT("RUNTER");
LSTR MSG_BACK = _UxGT("Zurück");
LSTR MSG_ERROR = _UxGT("Fehler");
LSTR MSG_MEDIA_ABORTING = _UxGT("Abbruch...");
LSTR MSG_MEDIA_INSERTED = _UxGT("Medium erkannt");
LSTR MSG_MEDIA_REMOVED = _UxGT("Medium entfernt");
@ -51,6 +54,8 @@ namespace Language_de {
LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Software-Endstopp");
LSTR MSG_MAIN = _UxGT("Hauptmenü");
LSTR MSG_ADVANCED_SETTINGS = _UxGT("Erw. Einstellungen");
LSTR MSG_TOOLBAR_SETUP = _UxGT("Toolbar Einstellung");
LSTR MSG_OPTION_DISABLED = _UxGT("Option Deaktiviert");
LSTR MSG_CONFIGURATION = _UxGT("Konfiguration");
LSTR MSG_RUN_AUTO_FILES = _UxGT("Autostart");
LSTR MSG_DISABLE_STEPPERS = _UxGT("Motoren deaktivieren"); // M84 :: Max length 19 characters
@ -64,6 +69,7 @@ namespace Language_de {
LSTR MSG_AUTO_HOME_Z = _UxGT("Home Z");
LSTR MSG_FILAMENT_SET = _UxGT("Fila. Einstellungen");
LSTR MSG_FILAMENT_MAN = _UxGT("Filament Management");
LSTR MSG_MANUAL_LEVELING = _UxGT("Manuell Nivellierung");
LSTR MSG_LEVBED_FL = _UxGT("Vorne Links");
LSTR MSG_LEVBED_FR = _UxGT("Vorne Rechts");
LSTR MSG_LEVBED_C = _UxGT("Mitte");
@ -96,7 +102,14 @@ namespace Language_de {
LSTR MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" Alles Vorwärmen");
LSTR MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" Bett Vorwärmen");
LSTR MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" Einstellungen");
#ifdef PREHEAT_2_LABEL
LSTR MSG_PREHEAT_2 = PREHEAT_2_LABEL _UxGT(" Vorwärmen");
LSTR MSG_PREHEAT_2_SETTINGS = PREHEAT_2_LABEL _UxGT(" Vorwärmen Konf");
#endif
#ifdef PREHEAT_3_LABEL
LSTR MSG_PREHEAT_3 = PREHEAT_3_LABEL _UxGT(" Vorwärmen");
LSTR MSG_PREHEAT_3_SETTINGS = PREHEAT_3_LABEL _UxGT(" Vorwärmen Konf");
#endif
LSTR MSG_PREHEAT_M = _UxGT("$ Vorwärmen");
LSTR MSG_PREHEAT_M_H = _UxGT("$ Vorwärmen") " ~";
LSTR MSG_PREHEAT_M_END = _UxGT("$ Extr. Vorwärmen");
@ -143,10 +156,19 @@ namespace Language_de {
LSTR MSG_MESH_VIEW = _UxGT("Netz ansehen");
LSTR MSG_EDITING_STOPPED = _UxGT("Netzbearb. angeh.");
LSTR MSG_NO_VALID_MESH = _UxGT("Kein gültiges Netz");
LSTR MSG_ACTIVATE_MESH = _UxGT("Nivellierung aktiv.");
LSTR MSG_PROBING_POINT = _UxGT("Messpunkt");
LSTR MSG_MESH_X = _UxGT("Index X");
LSTR MSG_MESH_Y = _UxGT("Index Y");
LSTR MSG_MESH_INSET = _UxGT("Mesh-Einsatz");
LSTR MSG_MESH_MIN_X = _UxGT("Mesh X Minimum");
LSTR MSG_MESH_MAX_X = _UxGT("Mesh X Maximum");
LSTR MSG_MESH_MIN_Y = _UxGT("Mesh Y Minimum");
LSTR MSG_MESH_MAX_Y = _UxGT("Mesh Y Maximum");
LSTR MSG_MESH_AMAX = _UxGT("Bereich maximieren");
LSTR MSG_MESH_CENTER = _UxGT("Center Area");
LSTR MSG_MESH_EDIT_Z = _UxGT("Z-Wert");
LSTR MSG_MESH_CANCEL = _UxGT("Mesh abgebrochen");
LSTR MSG_CUSTOM_COMMANDS = _UxGT("Benutzer-Menü");
LSTR MSG_M48_TEST = _UxGT("M48 Sondentest");
LSTR MSG_M48_POINT = _UxGT("M48 Punkt");
@ -165,6 +187,9 @@ namespace Language_de {
LSTR MSG_UBL_TOOLS = _UxGT("UBL-Werkzeuge");
LSTR MSG_UBL_LEVEL_BED = _UxGT("Unified Bed Leveling");
LSTR MSG_LCD_TILTING_MESH = _UxGT("Berührungspunkt");
LSTR MSG_UBL_TILT_MESH = _UxGT("Tilt Mesh");
LSTR MSG_UBL_TILTING_GRID = _UxGT("Tilting Grid Size");
LSTR MSG_UBL_MESH_TILTED = _UxGT("Mesh Tilted");
LSTR MSG_UBL_MANUAL_MESH = _UxGT("Netz manuell erst.");
LSTR MSG_UBL_MESH_WIZARD = _UxGT("UBL Netz Assistent");
LSTR MSG_UBL_BC_INSERT = _UxGT("Unterlegen & messen");
@ -183,14 +208,12 @@ namespace Language_de {
LSTR MSG_UBL_DONE_EDITING_MESH = _UxGT("Bearbeitung beendet");
LSTR MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("Eigenes Netz erst.");
LSTR MSG_UBL_BUILD_MESH_MENU = _UxGT("Netz erstellen");
#if HAS_PREHEAT
LSTR MSG_UBL_BUILD_MESH_M = _UxGT("$ Netz erstellen");
LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("$ Netz validieren");
#endif
LSTR MSG_UBL_BUILD_MESH_M = _UxGT("$ Netz erstellen");
LSTR MSG_UBL_BUILD_COLD_MESH = _UxGT("Netz erstellen kalt");
LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("Netzhöhe einst.");
LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Höhe");
LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Netz validieren");
LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("$ Netz validieren");
LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Eig. Netz validieren");
LSTR MSG_G26_HEATING_BED = _UxGT("G26 heizt Bett");
LSTR MSG_G26_HEATING_NOZZLE = _UxGT("G26 Düse aufheizen");
@ -215,6 +238,8 @@ namespace Language_de {
LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("Manuelles Füllen");
LSTR MSG_UBL_SMART_FILLIN = _UxGT("Cleveres Füllen");
LSTR MSG_UBL_FILLIN_MESH = _UxGT("Netz Füllen");
LSTR MSG_UBL_MESH_FILLED = _UxGT("Fehlende Punkte erg.");
LSTR MSG_UBL_MESH_INVALID = _UxGT("Ungültiges Netz");
LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("Alles annullieren");
LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Nächstlieg. ann.");
LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("Feineinst. Alles");
@ -223,6 +248,7 @@ namespace Language_de {
LSTR MSG_UBL_STORAGE_SLOT = _UxGT("Speicherort");
LSTR MSG_UBL_LOAD_MESH = _UxGT("Bettnetz laden");
LSTR MSG_UBL_SAVE_MESH = _UxGT("Bettnetz speichern");
LSTR MSG_UBL_INVALID_SLOT = _UxGT("Wähle einen Mesh-Slot");
LSTR MSG_MESH_LOADED = _UxGT("Netz %i geladen");
LSTR MSG_MESH_SAVED = _UxGT("Netz %i gespeichert");
LSTR MSG_UBL_NO_STORAGE = _UxGT("Kein Speicher");
@ -231,12 +257,12 @@ namespace Language_de {
LSTR MSG_UBL_Z_OFFSET = _UxGT("Z-Versatz: ");
LSTR MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z-Versatz angehalten");
LSTR MSG_UBL_STEP_BY_STEP_MENU = _UxGT("Schrittweises UBL");
LSTR MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1.Netz erstellen kalt");
LSTR MSG_UBL_2_SMART_FILLIN = _UxGT("2.Cleveres Füllen");
LSTR MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1.Netz kalt erstellen");
LSTR MSG_UBL_2_SMART_FILLIN = _UxGT("2.Intelligent Füllen");
LSTR MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3.Netz validieren");
LSTR MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4.Feineinst. Alles");
LSTR MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4.Alles Feineinst.");
LSTR MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5.Netz validieren");
LSTR MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6.Feineinst. Alles");
LSTR MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6.Alles Feineinst.");
LSTR MSG_UBL_7_SAVE_MESH = _UxGT("7.Bettnetz speichern");
LSTR MSG_LED_CONTROL = _UxGT("Licht-Steuerung");
@ -315,7 +341,11 @@ namespace Language_de {
LSTR MSG_PID_AUTOTUNE_E = _UxGT("PID Autotune *");
LSTR MSG_PID_CYCLE = _UxGT("PID Zyklus");
LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("PID Tuning fertig");
LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune fehlge.! Falscher Extruder");
LSTR MSG_PID_AUTOTUNE_FAILED = _UxGT("PID Autotune fehlge.!");
LSTR MSG_BAD_EXTRUDER_NUM = _UxGT("ungültiger Extruder.");
LSTR MSG_TEMP_TOO_HIGH = _UxGT("Temperatur zu hoch.");
LSTR MSG_TIMEOUT = _UxGT("Timeout.");
LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune fehlge.! Ungültiger Extruder");
LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune fehlge.! Temperatur zu hoch.");
LSTR MSG_PID_TIMEOUT = _UxGT("Autotune fehlge.! Timeout.");
LSTR MSG_MPC_MEASURING_AMBIENT = _UxGT("teste Wärmeverlust");
@ -334,14 +364,14 @@ namespace Language_de {
LSTR MSG_VB_JERK = _UxGT("Max ") STR_B _UxGT(" Jerk");
LSTR MSG_VC_JERK = _UxGT("Max ") STR_C _UxGT(" Jerk");
LSTR MSG_VN_JERK = _UxGT("Max @ Jerk");
LSTR MSG_VE_JERK = _UxGT("Max E Jerk");
LSTR MSG_VE_JERK = _UxGT("Max ") STR_E _UxGT(" Jerk");
LSTR MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev");
LSTR MSG_MAX_SPEED = _UxGT("Max Geschw. (mm/s)");
LSTR MSG_VMAX_A = _UxGT("V max ") STR_A;
LSTR MSG_VMAX_B = _UxGT("V max ") STR_B;
LSTR MSG_VMAX_C = _UxGT("V max ") STR_C;
LSTR MSG_VMAX_N = _UxGT("V max @");
LSTR MSG_VMAX_E = _UxGT("V max E");
LSTR MSG_VMAX_E = _UxGT("V max ") STR_E;
LSTR MSG_VMAX_EN = _UxGT("V max *");
LSTR MSG_VMIN = _UxGT("V min ");
LSTR MSG_VTRAV_MIN = _UxGT("V min Leerfahrt");
@ -350,7 +380,7 @@ namespace Language_de {
LSTR MSG_AMAX_B = _UxGT("A max ") STR_B;
LSTR MSG_AMAX_C = _UxGT("A max ") STR_C;
LSTR MSG_AMAX_N = _UxGT("A max @");
LSTR MSG_AMAX_E = _UxGT("A max E");
LSTR MSG_AMAX_E = _UxGT("A max ") STR_E;
LSTR MSG_AMAX_EN = _UxGT("A max *");
LSTR MSG_A_RETRACT = _UxGT("A Einzug");
LSTR MSG_A_TRAVEL = _UxGT("A Leerfahrt");
@ -378,6 +408,7 @@ namespace Language_de {
LSTR MSG_CONTRAST = _UxGT("LCD-Kontrast");
LSTR MSG_BRIGHTNESS = _UxGT("LCD-Helligkeit");
LSTR MSG_LCD_TIMEOUT_SEC = _UxGT("LCD-Ruhezustand (s)");
LSTR MSG_SCREEN_TIMEOUT = _UxGT("LCD Timeout (m)");
LSTR MSG_BRIGHTNESS_OFF = _UxGT("LCD ausschalten");
LSTR MSG_STORE_EEPROM = _UxGT("Konfig. speichern");
LSTR MSG_LOAD_EEPROM = _UxGT("Konfig. laden");
@ -391,6 +422,10 @@ namespace Language_de {
LSTR MSG_RESET_PRINTER = _UxGT("Drucker neustarten");
LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Aktualisieren");
LSTR MSG_INFO_SCREEN = _UxGT("Info");
LSTR MSG_INFO_MACHINENAME = _UxGT("Machine Name");
LSTR MSG_INFO_SIZE = _UxGT("Größe");
LSTR MSG_INFO_FWVERSION = _UxGT("Firmware Version");
LSTR MSG_INFO_BUILD = _UxGT("Build Datum");
LSTR MSG_PREPARE = _UxGT("Vorbereitung");
LSTR MSG_TUNE = _UxGT("Justierung");
LSTR MSG_POWER_MONITOR = _UxGT("Power Monitor");
@ -417,6 +452,7 @@ namespace Language_de {
LSTR MSG_BUTTON_RESUME = _UxGT("Fortsetzen");
LSTR MSG_BUTTON_ADVANCED = _UxGT("Erweitert");
LSTR MSG_BUTTON_SAVE = _UxGT("Speichern");
LSTR MSG_BUTTON_PURGE = _UxGT("Reinigen");
LSTR MSG_PAUSING = _UxGT("Pause...");
LSTR MSG_PAUSE_PRINT = _UxGT("SD-Druck pausieren");
LSTR MSG_ADVANCED_PAUSE = _UxGT("Erweiterte Pause");
@ -439,9 +475,12 @@ namespace Language_de {
LSTR MSG_REMAINING_TIME = _UxGT("Verbleiben");
LSTR MSG_PRINT_ABORTED = _UxGT("Druck abgebrochen");
LSTR MSG_PRINT_DONE = _UxGT("Druck fertig");
LSTR MSG_PRINTER_KILLED = _UxGT("Drucker killed!");
LSTR MSG_TURN_OFF = _UxGT("Drucker ausschalten");
LSTR MSG_NO_MOVE = _UxGT("Motoren angeschaltet");
LSTR MSG_KILLED = _UxGT("ABGEBROCHEN");
LSTR MSG_STOPPED = _UxGT("ANGEHALTEN");
LSTR MSG_FWRETRACT = _UxGT("Firmware Retract");
LSTR MSG_CONTROL_RETRACT = _UxGT("Einzug mm");
LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Wechs. Einzug mm");
LSTR MSG_CONTROL_RETRACTF = _UxGT("V Einzug");
@ -507,6 +546,9 @@ namespace Language_de {
LSTR MSG_ZPROBE_XOFFSET = _UxGT("Sondenversatz X");
LSTR MSG_ZPROBE_YOFFSET = _UxGT("Sondenversatz Y");
LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Sondenversatz Z");
LSTR MSG_ZPROBE_MARGIN = _UxGT("Sondenrand");
LSTR MSG_Z_FEED_RATE = _UxGT("Z-Vorschub");
LSTR MSG_ENABLE_HS_MODE = _UxGT("HS-Modus aktivieren");
LSTR MSG_MOVE_NOZZLE_TO_BED = _UxGT("Bewege Düse zum Bett");
LSTR MSG_BABYSTEP_X = _UxGT("Babystep X");
LSTR MSG_BABYSTEP_Y = _UxGT("Babystep Y");
@ -570,33 +612,37 @@ namespace Language_de {
LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Helligkeit");
LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("Falscher Drucker");
LSTR MSG_COLORS_GET = _UxGT("Farbe");
LSTR MSG_COLORS_SELECT = _UxGT("Farben auswählen");
LSTR MSG_COLORS_APPLIED = _UxGT("Farben verwenden");
LSTR MSG_COLORS_RED = _UxGT("Rot");
LSTR MSG_COLORS_GREEN = _UxGT("Grün");
LSTR MSG_COLORS_BLUE = _UxGT("Blau");
LSTR MSG_COLORS_WHITE = _UxGT("Weiß");
LSTR MSG_UI_LANGUAGE = _UxGT("UI Sprache");
LSTR MSG_SOUND_ENABLE = _UxGT("Ton aktivieren");
LSTR MSG_LOCKSCREEN = _UxGT("Bildschirm sperren");
LSTR MSG_LOCKSCREEN_LOCKED = _UxGT("Drucker ist gesperrt,");
LSTR MSG_LOCKSCREEN_UNLOCK = _UxGT("Scrollen zum Entsper.");
#if LCD_WIDTH >= 20 || HAS_DWIN_E3V2
LSTR MSG_MEDIA_NOT_INSERTED = _UxGT("Kein Medium eingelegt.");
LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Bitte auf Neustart warten. ");
LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte das Hot-End vorheizen.");
LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Bitte auf Neustart warten.");
LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte das Hotend vorheizen.");
LSTR MSG_INFO_PRINT_COUNT_RESET = _UxGT("Druckzähler zurücksetzen");
LSTR MSG_INFO_PRINT_COUNT = _UxGT("Gesamte Drucke");
LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Komplette Drucke");
LSTR MSG_INFO_PRINT_TIME = _UxGT("Gesamte Druckzeit");
LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Längste Druckzeit");
LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Gesamt Extrudiert");
LSTR MSG_COLORS_GET = _UxGT("Farbe");
LSTR MSG_COLORS_SELECT = _UxGT("Farben auswählen");
LSTR MSG_COLORS_APPLIED = _UxGT("Farben verwenden");
LSTR MSG_COLORS_RED = _UxGT("Rot");
LSTR MSG_COLORS_GREEN = _UxGT("Grün");
LSTR MSG_COLORS_BLUE = _UxGT("Blau");
LSTR MSG_COLORS_WHITE = _UxGT("Weiß");
LSTR MSG_UI_LANGUAGE = _UxGT("UI Sprache");
LSTR MSG_SOUND_ENABLE = _UxGT("Ton aktivieren");
LSTR MSG_LOCKSCREEN = _UxGT("Bildschirm sperren");
#else
LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Auf Neustart warten");
LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte vorheizen");
LSTR MSG_INFO_PRINT_COUNT = _UxGT("Drucke");
LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Komplette");
LSTR MSG_INFO_PRINT_TIME = _UxGT("Gesamte");
LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Längste");
LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Extrud.");
LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte vorheizen");
#endif
LSTR MSG_INFO_MIN_TEMP = _UxGT("Min Temp");
@ -613,10 +659,14 @@ namespace Language_de {
LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("FORTS. OPTIONEN:");
LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Mehr entladen");
LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Druck weiter");
LSTR MSG_FILAMENT_CHANGE_PURGE_CONTINUE = _UxGT("Löschen o. fortfah.?");
LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Düse: ");
LSTR MSG_RUNOUT_SENSOR = _UxGT("Runout-Sensor");
LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Runout-Weg mm");
LSTR MSG_RUNOUT_ENABLE = _UxGT("Runout aktivieren");
LSTR MSG_RUNOUT_ACTIVE = _UxGT("Runout aktiv");
LSTR MSG_INVERT_EXTRUDER = _UxGT("Invert Extruder");
LSTR MSG_EXTRUDER_MIN_TEMP = _UxGT("Extruder Min Temp.");
LSTR MSG_FANCHECK = _UxGT("Lüftergeschw. prüfen");
LSTR MSG_KILL_HOMING_FAILED = _UxGT("Homing gescheitert");
LSTR MSG_LCD_PROBING_FAILED = _UxGT("Probing gescheitert");
@ -660,6 +710,7 @@ namespace Language_de {
LSTR MSG_VTOOLS_RESET = _UxGT("V-Tools ist resetet");
LSTR MSG_START_Z = _UxGT("Z Start:");
LSTR MSG_END_Z = _UxGT("Z Ende:");
LSTR MSG_GAMES = _UxGT("Spiele");
LSTR MSG_BRICKOUT = _UxGT("Brickout");
LSTR MSG_INVADERS = _UxGT("Invaders");
@ -683,6 +734,7 @@ namespace Language_de {
//
// Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen
// ...oder 2 Zeilen auf einem 3-Zeilen-Display.
#if LCD_HEIGHT >= 4
LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("Knopf drücken um", "Druck fortzusetzen"));
LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_2_LINE("Druck ist", "pausiert..."));
@ -720,10 +772,11 @@ namespace Language_de {
LSTR MSG_BACKLASH = _UxGT("Spiel");
LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrektur");
LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Glätten");
LSTR MSG_LEVEL_X_AXIS = _UxGT("X Achse leveln");
LSTR MSG_AUTO_CALIBRATE = _UxGT("Auto. Kalibiren");
#if ENABLED(TOUCH_UI_FTDI_EVE)
LSTR MSG_HEATER_TIMEOUT = _UxGT("Idle Timeout, Temperatur fällt. Drücke Okay, um erneut aufzuheizen und fortzufahren.");
LSTR MSG_HEATER_TIMEOUT = _UxGT("Idle Timeout, Temperatur gefallen. Drücke Okay, um erneut aufzuheizen und fortzufahren.");
#else
LSTR MSG_HEATER_TIMEOUT = _UxGT("Heizungs Timeout");
#endif

Loading…
Cancel
Save