diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index a9fa16c77c..5708221e9c 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -37,7 +37,10 @@ namespace Language_de { LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" bereit"); LSTR MSG_YES = _UxGT("JA"); LSTR MSG_NO = _UxGT("NEIN"); + LSTR MSG_HIGH = _UxGT("HOCH"); + LSTR MSG_LOW = _UxGT("RUNTER"); LSTR MSG_BACK = _UxGT("Zurück"); + LSTR MSG_ERROR = _UxGT("Fehler"); LSTR MSG_MEDIA_ABORTING = _UxGT("Abbruch..."); LSTR MSG_MEDIA_INSERTED = _UxGT("Medium erkannt"); LSTR MSG_MEDIA_REMOVED = _UxGT("Medium entfernt"); @@ -51,6 +54,8 @@ namespace Language_de { LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Software-Endstopp"); LSTR MSG_MAIN = _UxGT("Hauptmenü"); LSTR MSG_ADVANCED_SETTINGS = _UxGT("Erw. Einstellungen"); + LSTR MSG_TOOLBAR_SETUP = _UxGT("Toolbar Einstellung"); + LSTR MSG_OPTION_DISABLED = _UxGT("Option Deaktiviert"); LSTR MSG_CONFIGURATION = _UxGT("Konfiguration"); LSTR MSG_RUN_AUTO_FILES = _UxGT("Autostart"); LSTR MSG_DISABLE_STEPPERS = _UxGT("Motoren deaktivieren"); // M84 :: Max length 19 characters @@ -64,6 +69,7 @@ namespace Language_de { LSTR MSG_AUTO_HOME_Z = _UxGT("Home Z"); LSTR MSG_FILAMENT_SET = _UxGT("Fila. Einstellungen"); LSTR MSG_FILAMENT_MAN = _UxGT("Filament Management"); + LSTR MSG_MANUAL_LEVELING = _UxGT("Manuell Nivellierung"); LSTR MSG_LEVBED_FL = _UxGT("Vorne Links"); LSTR MSG_LEVBED_FR = _UxGT("Vorne Rechts"); LSTR MSG_LEVBED_C = _UxGT("Mitte"); @@ -96,7 +102,14 @@ namespace Language_de { LSTR MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" Alles Vorwärmen"); LSTR MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" Bett Vorwärmen"); LSTR MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" Einstellungen"); - + #ifdef PREHEAT_2_LABEL + LSTR MSG_PREHEAT_2 = PREHEAT_2_LABEL _UxGT(" Vorwärmen"); + LSTR MSG_PREHEAT_2_SETTINGS = PREHEAT_2_LABEL _UxGT(" Vorwärmen Konf"); + #endif + #ifdef PREHEAT_3_LABEL + LSTR MSG_PREHEAT_3 = PREHEAT_3_LABEL _UxGT(" Vorwärmen"); + LSTR MSG_PREHEAT_3_SETTINGS = PREHEAT_3_LABEL _UxGT(" Vorwärmen Konf"); + #endif LSTR MSG_PREHEAT_M = _UxGT("$ Vorwärmen"); LSTR MSG_PREHEAT_M_H = _UxGT("$ Vorwärmen") " ~"; LSTR MSG_PREHEAT_M_END = _UxGT("$ Extr. Vorwärmen"); @@ -143,10 +156,19 @@ namespace Language_de { LSTR MSG_MESH_VIEW = _UxGT("Netz ansehen"); LSTR MSG_EDITING_STOPPED = _UxGT("Netzbearb. angeh."); LSTR MSG_NO_VALID_MESH = _UxGT("Kein gültiges Netz"); + LSTR MSG_ACTIVATE_MESH = _UxGT("Nivellierung aktiv."); LSTR MSG_PROBING_POINT = _UxGT("Messpunkt"); LSTR MSG_MESH_X = _UxGT("Index X"); LSTR MSG_MESH_Y = _UxGT("Index Y"); + LSTR MSG_MESH_INSET = _UxGT("Mesh-Einsatz"); + LSTR MSG_MESH_MIN_X = _UxGT("Mesh X Minimum"); + LSTR MSG_MESH_MAX_X = _UxGT("Mesh X Maximum"); + LSTR MSG_MESH_MIN_Y = _UxGT("Mesh Y Minimum"); + LSTR MSG_MESH_MAX_Y = _UxGT("Mesh Y Maximum"); + LSTR MSG_MESH_AMAX = _UxGT("Bereich maximieren"); + LSTR MSG_MESH_CENTER = _UxGT("Center Area"); LSTR MSG_MESH_EDIT_Z = _UxGT("Z-Wert"); + LSTR MSG_MESH_CANCEL = _UxGT("Mesh abgebrochen"); LSTR MSG_CUSTOM_COMMANDS = _UxGT("Benutzer-Menü"); LSTR MSG_M48_TEST = _UxGT("M48 Sondentest"); LSTR MSG_M48_POINT = _UxGT("M48 Punkt"); @@ -165,6 +187,9 @@ namespace Language_de { LSTR MSG_UBL_TOOLS = _UxGT("UBL-Werkzeuge"); LSTR MSG_UBL_LEVEL_BED = _UxGT("Unified Bed Leveling"); LSTR MSG_LCD_TILTING_MESH = _UxGT("Berührungspunkt"); + LSTR MSG_UBL_TILT_MESH = _UxGT("Tilt Mesh"); + LSTR MSG_UBL_TILTING_GRID = _UxGT("Tilting Grid Size"); + LSTR MSG_UBL_MESH_TILTED = _UxGT("Mesh Tilted"); LSTR MSG_UBL_MANUAL_MESH = _UxGT("Netz manuell erst."); LSTR MSG_UBL_MESH_WIZARD = _UxGT("UBL Netz Assistent"); LSTR MSG_UBL_BC_INSERT = _UxGT("Unterlegen & messen"); @@ -183,14 +208,12 @@ namespace Language_de { LSTR MSG_UBL_DONE_EDITING_MESH = _UxGT("Bearbeitung beendet"); LSTR MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("Eigenes Netz erst."); LSTR MSG_UBL_BUILD_MESH_MENU = _UxGT("Netz erstellen"); - #if HAS_PREHEAT - LSTR MSG_UBL_BUILD_MESH_M = _UxGT("$ Netz erstellen"); - LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("$ Netz validieren"); - #endif + LSTR MSG_UBL_BUILD_MESH_M = _UxGT("$ Netz erstellen"); LSTR MSG_UBL_BUILD_COLD_MESH = _UxGT("Netz erstellen kalt"); LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("Netzhöhe einst."); LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Höhe"); LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Netz validieren"); + LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("$ Netz validieren"); LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Eig. Netz validieren"); LSTR MSG_G26_HEATING_BED = _UxGT("G26 heizt Bett"); LSTR MSG_G26_HEATING_NOZZLE = _UxGT("G26 Düse aufheizen"); @@ -215,6 +238,8 @@ namespace Language_de { LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("Manuelles Füllen"); LSTR MSG_UBL_SMART_FILLIN = _UxGT("Cleveres Füllen"); LSTR MSG_UBL_FILLIN_MESH = _UxGT("Netz Füllen"); + LSTR MSG_UBL_MESH_FILLED = _UxGT("Fehlende Punkte erg."); + LSTR MSG_UBL_MESH_INVALID = _UxGT("Ungültiges Netz"); LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("Alles annullieren"); LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Nächstlieg. ann."); LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("Feineinst. Alles"); @@ -223,6 +248,7 @@ namespace Language_de { LSTR MSG_UBL_STORAGE_SLOT = _UxGT("Speicherort"); LSTR MSG_UBL_LOAD_MESH = _UxGT("Bettnetz laden"); LSTR MSG_UBL_SAVE_MESH = _UxGT("Bettnetz speichern"); + LSTR MSG_UBL_INVALID_SLOT = _UxGT("Wähle einen Mesh-Slot"); LSTR MSG_MESH_LOADED = _UxGT("Netz %i geladen"); LSTR MSG_MESH_SAVED = _UxGT("Netz %i gespeichert"); LSTR MSG_UBL_NO_STORAGE = _UxGT("Kein Speicher"); @@ -231,12 +257,12 @@ namespace Language_de { LSTR MSG_UBL_Z_OFFSET = _UxGT("Z-Versatz: "); LSTR MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z-Versatz angehalten"); LSTR MSG_UBL_STEP_BY_STEP_MENU = _UxGT("Schrittweises UBL"); - LSTR MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1.Netz erstellen kalt"); - LSTR MSG_UBL_2_SMART_FILLIN = _UxGT("2.Cleveres Füllen"); + LSTR MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1.Netz kalt erstellen"); + LSTR MSG_UBL_2_SMART_FILLIN = _UxGT("2.Intelligent Füllen"); LSTR MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3.Netz validieren"); - LSTR MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4.Feineinst. Alles"); + LSTR MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4.Alles Feineinst."); LSTR MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5.Netz validieren"); - LSTR MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6.Feineinst. Alles"); + LSTR MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6.Alles Feineinst."); LSTR MSG_UBL_7_SAVE_MESH = _UxGT("7.Bettnetz speichern"); LSTR MSG_LED_CONTROL = _UxGT("Licht-Steuerung"); @@ -315,7 +341,11 @@ namespace Language_de { LSTR MSG_PID_AUTOTUNE_E = _UxGT("PID Autotune *"); LSTR MSG_PID_CYCLE = _UxGT("PID Zyklus"); LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("PID Tuning fertig"); - LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune fehlge.! Falscher Extruder"); + LSTR MSG_PID_AUTOTUNE_FAILED = _UxGT("PID Autotune fehlge.!"); + LSTR MSG_BAD_EXTRUDER_NUM = _UxGT("ungültiger Extruder."); + LSTR MSG_TEMP_TOO_HIGH = _UxGT("Temperatur zu hoch."); + LSTR MSG_TIMEOUT = _UxGT("Timeout."); + LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune fehlge.! Ungültiger Extruder"); LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune fehlge.! Temperatur zu hoch."); LSTR MSG_PID_TIMEOUT = _UxGT("Autotune fehlge.! Timeout."); LSTR MSG_MPC_MEASURING_AMBIENT = _UxGT("teste Wärmeverlust"); @@ -334,14 +364,14 @@ namespace Language_de { LSTR MSG_VB_JERK = _UxGT("Max ") STR_B _UxGT(" Jerk"); LSTR MSG_VC_JERK = _UxGT("Max ") STR_C _UxGT(" Jerk"); LSTR MSG_VN_JERK = _UxGT("Max @ Jerk"); - LSTR MSG_VE_JERK = _UxGT("Max E Jerk"); + LSTR MSG_VE_JERK = _UxGT("Max ") STR_E _UxGT(" Jerk"); LSTR MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev"); LSTR MSG_MAX_SPEED = _UxGT("Max Geschw. (mm/s)"); LSTR MSG_VMAX_A = _UxGT("V max ") STR_A; LSTR MSG_VMAX_B = _UxGT("V max ") STR_B; LSTR MSG_VMAX_C = _UxGT("V max ") STR_C; LSTR MSG_VMAX_N = _UxGT("V max @"); - LSTR MSG_VMAX_E = _UxGT("V max E"); + LSTR MSG_VMAX_E = _UxGT("V max ") STR_E; LSTR MSG_VMAX_EN = _UxGT("V max *"); LSTR MSG_VMIN = _UxGT("V min "); LSTR MSG_VTRAV_MIN = _UxGT("V min Leerfahrt"); @@ -350,7 +380,7 @@ namespace Language_de { LSTR MSG_AMAX_B = _UxGT("A max ") STR_B; LSTR MSG_AMAX_C = _UxGT("A max ") STR_C; LSTR MSG_AMAX_N = _UxGT("A max @"); - LSTR MSG_AMAX_E = _UxGT("A max E"); + LSTR MSG_AMAX_E = _UxGT("A max ") STR_E; LSTR MSG_AMAX_EN = _UxGT("A max *"); LSTR MSG_A_RETRACT = _UxGT("A Einzug"); LSTR MSG_A_TRAVEL = _UxGT("A Leerfahrt"); @@ -378,6 +408,7 @@ namespace Language_de { LSTR MSG_CONTRAST = _UxGT("LCD-Kontrast"); LSTR MSG_BRIGHTNESS = _UxGT("LCD-Helligkeit"); LSTR MSG_LCD_TIMEOUT_SEC = _UxGT("LCD-Ruhezustand (s)"); + LSTR MSG_SCREEN_TIMEOUT = _UxGT("LCD Timeout (m)"); LSTR MSG_BRIGHTNESS_OFF = _UxGT("LCD ausschalten"); LSTR MSG_STORE_EEPROM = _UxGT("Konfig. speichern"); LSTR MSG_LOAD_EEPROM = _UxGT("Konfig. laden"); @@ -391,6 +422,10 @@ namespace Language_de { LSTR MSG_RESET_PRINTER = _UxGT("Drucker neustarten"); LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Aktualisieren"); LSTR MSG_INFO_SCREEN = _UxGT("Info"); + LSTR MSG_INFO_MACHINENAME = _UxGT("Machine Name"); + LSTR MSG_INFO_SIZE = _UxGT("Größe"); + LSTR MSG_INFO_FWVERSION = _UxGT("Firmware Version"); + LSTR MSG_INFO_BUILD = _UxGT("Build Datum"); LSTR MSG_PREPARE = _UxGT("Vorbereitung"); LSTR MSG_TUNE = _UxGT("Justierung"); LSTR MSG_POWER_MONITOR = _UxGT("Power Monitor"); @@ -417,6 +452,7 @@ namespace Language_de { LSTR MSG_BUTTON_RESUME = _UxGT("Fortsetzen"); LSTR MSG_BUTTON_ADVANCED = _UxGT("Erweitert"); LSTR MSG_BUTTON_SAVE = _UxGT("Speichern"); + LSTR MSG_BUTTON_PURGE = _UxGT("Reinigen"); LSTR MSG_PAUSING = _UxGT("Pause..."); LSTR MSG_PAUSE_PRINT = _UxGT("SD-Druck pausieren"); LSTR MSG_ADVANCED_PAUSE = _UxGT("Erweiterte Pause"); @@ -439,9 +475,12 @@ namespace Language_de { LSTR MSG_REMAINING_TIME = _UxGT("Verbleiben"); LSTR MSG_PRINT_ABORTED = _UxGT("Druck abgebrochen"); LSTR MSG_PRINT_DONE = _UxGT("Druck fertig"); + LSTR MSG_PRINTER_KILLED = _UxGT("Drucker killed!"); + LSTR MSG_TURN_OFF = _UxGT("Drucker ausschalten"); LSTR MSG_NO_MOVE = _UxGT("Motoren angeschaltet"); LSTR MSG_KILLED = _UxGT("ABGEBROCHEN"); LSTR MSG_STOPPED = _UxGT("ANGEHALTEN"); + LSTR MSG_FWRETRACT = _UxGT("Firmware Retract"); LSTR MSG_CONTROL_RETRACT = _UxGT("Einzug mm"); LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Wechs. Einzug mm"); LSTR MSG_CONTROL_RETRACTF = _UxGT("V Einzug"); @@ -507,6 +546,9 @@ namespace Language_de { LSTR MSG_ZPROBE_XOFFSET = _UxGT("Sondenversatz X"); LSTR MSG_ZPROBE_YOFFSET = _UxGT("Sondenversatz Y"); LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Sondenversatz Z"); + LSTR MSG_ZPROBE_MARGIN = _UxGT("Sondenrand"); + LSTR MSG_Z_FEED_RATE = _UxGT("Z-Vorschub"); + LSTR MSG_ENABLE_HS_MODE = _UxGT("HS-Modus aktivieren"); LSTR MSG_MOVE_NOZZLE_TO_BED = _UxGT("Bewege Düse zum Bett"); LSTR MSG_BABYSTEP_X = _UxGT("Babystep X"); LSTR MSG_BABYSTEP_Y = _UxGT("Babystep Y"); @@ -570,33 +612,37 @@ namespace Language_de { LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Helligkeit"); LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("Falscher Drucker"); + LSTR MSG_COLORS_GET = _UxGT("Farbe"); + LSTR MSG_COLORS_SELECT = _UxGT("Farben auswählen"); + LSTR MSG_COLORS_APPLIED = _UxGT("Farben verwenden"); + LSTR MSG_COLORS_RED = _UxGT("Rot"); + LSTR MSG_COLORS_GREEN = _UxGT("Grün"); + LSTR MSG_COLORS_BLUE = _UxGT("Blau"); + LSTR MSG_COLORS_WHITE = _UxGT("Weiß"); + LSTR MSG_UI_LANGUAGE = _UxGT("UI Sprache"); + LSTR MSG_SOUND_ENABLE = _UxGT("Ton aktivieren"); + LSTR MSG_LOCKSCREEN = _UxGT("Bildschirm sperren"); + LSTR MSG_LOCKSCREEN_LOCKED = _UxGT("Drucker ist gesperrt,"); + LSTR MSG_LOCKSCREEN_UNLOCK = _UxGT("Scrollen zum Entsper."); + #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 LSTR MSG_MEDIA_NOT_INSERTED = _UxGT("Kein Medium eingelegt."); - LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Bitte auf Neustart warten. "); - LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte das Hot-End vorheizen."); + LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Bitte auf Neustart warten."); + LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte das Hotend vorheizen."); LSTR MSG_INFO_PRINT_COUNT_RESET = _UxGT("Druckzähler zurücksetzen"); LSTR MSG_INFO_PRINT_COUNT = _UxGT("Gesamte Drucke"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Komplette Drucke"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Gesamte Druckzeit"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Längste Druckzeit"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Gesamt Extrudiert"); - LSTR MSG_COLORS_GET = _UxGT("Farbe"); - LSTR MSG_COLORS_SELECT = _UxGT("Farben auswählen"); - LSTR MSG_COLORS_APPLIED = _UxGT("Farben verwenden"); - LSTR MSG_COLORS_RED = _UxGT("Rot"); - LSTR MSG_COLORS_GREEN = _UxGT("Grün"); - LSTR MSG_COLORS_BLUE = _UxGT("Blau"); - LSTR MSG_COLORS_WHITE = _UxGT("Weiß"); - LSTR MSG_UI_LANGUAGE = _UxGT("UI Sprache"); - LSTR MSG_SOUND_ENABLE = _UxGT("Ton aktivieren"); - LSTR MSG_LOCKSCREEN = _UxGT("Bildschirm sperren"); #else + LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Auf Neustart warten"); + LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte vorheizen"); LSTR MSG_INFO_PRINT_COUNT = _UxGT("Drucke"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Komplette"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Gesamte"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Längste"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Extrud."); - LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte vorheizen"); #endif LSTR MSG_INFO_MIN_TEMP = _UxGT("Min Temp"); @@ -613,10 +659,14 @@ namespace Language_de { LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("FORTS. OPTIONEN:"); LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Mehr entladen"); LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Druck weiter"); + LSTR MSG_FILAMENT_CHANGE_PURGE_CONTINUE = _UxGT("Löschen o. fortfah.?"); LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Düse: "); LSTR MSG_RUNOUT_SENSOR = _UxGT("Runout-Sensor"); LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Runout-Weg mm"); LSTR MSG_RUNOUT_ENABLE = _UxGT("Runout aktivieren"); + LSTR MSG_RUNOUT_ACTIVE = _UxGT("Runout aktiv"); + LSTR MSG_INVERT_EXTRUDER = _UxGT("Invert Extruder"); + LSTR MSG_EXTRUDER_MIN_TEMP = _UxGT("Extruder Min Temp."); LSTR MSG_FANCHECK = _UxGT("Lüftergeschw. prüfen"); LSTR MSG_KILL_HOMING_FAILED = _UxGT("Homing gescheitert"); LSTR MSG_LCD_PROBING_FAILED = _UxGT("Probing gescheitert"); @@ -660,6 +710,7 @@ namespace Language_de { LSTR MSG_VTOOLS_RESET = _UxGT("V-Tools ist resetet"); LSTR MSG_START_Z = _UxGT("Z Start:"); LSTR MSG_END_Z = _UxGT("Z Ende:"); + LSTR MSG_GAMES = _UxGT("Spiele"); LSTR MSG_BRICKOUT = _UxGT("Brickout"); LSTR MSG_INVADERS = _UxGT("Invaders"); @@ -683,6 +734,7 @@ namespace Language_de { // // Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen // ...oder 2 Zeilen auf einem 3-Zeilen-Display. + #if LCD_HEIGHT >= 4 LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("Knopf drücken um", "Druck fortzusetzen")); LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_2_LINE("Druck ist", "pausiert...")); @@ -720,10 +772,11 @@ namespace Language_de { LSTR MSG_BACKLASH = _UxGT("Spiel"); LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrektur"); LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Glätten"); + LSTR MSG_LEVEL_X_AXIS = _UxGT("X Achse leveln"); LSTR MSG_AUTO_CALIBRATE = _UxGT("Auto. Kalibiren"); #if ENABLED(TOUCH_UI_FTDI_EVE) - LSTR MSG_HEATER_TIMEOUT = _UxGT("Idle Timeout, Temperatur fällt. Drücke Okay, um erneut aufzuheizen und fortzufahren."); + LSTR MSG_HEATER_TIMEOUT = _UxGT("Idle Timeout, Temperatur gefallen. Drücke Okay, um erneut aufzuheizen und fortzufahren."); #else LSTR MSG_HEATER_TIMEOUT = _UxGT("Heizungs Timeout"); #endif